Repair and Renovation of PARK in front of House No. 180 sector 11 ward-15 MC PANIPAT Urban. For L and C Society.

`Supply and eraction of Round bracket having size as per site requirment on the top of 9 meter pole, suitable for eraction of 4 nos. of 100 watt led flood lights . Make: ISI Marked `

Leg Press: Providing, designing and fixing of stair stepper in a combination of pair and a single step of size 2000 X 550 X 1600 mm fabricated with main post of 140mm dia and 3.00 mm thick and other pipes of 40mm dia 3.00mm thick all pipes made up of hot rolled tubular steel and hot dipped galvanized, and powder coated using Akzo Nobel or equivalent of 80-120 micron thick. All welding joints of pipe are robotic welded with joints scalloped as necessary and dressed off removing sharp edges and burrs. Zinc primer paint to be applied at all welding points prior to finishing. Handle bars are to be provided with high quality grip rubber at top end. Padals shall be made up of Nylon alloy with rounded edge of prevent any impact of injury and seat to be made from virgin LLDPE manufactured by rotational moulding with minimum thickness of plastic 4.00mm, colourful and U V resistant environmental friendly. Bearing used shall be maintenance free, duly oiled sealed and self lubricated made by reputed company to be approved by Engineer-in-Charge. Equipment to be fitted within built limiters to prevent unwanted movements. All open ends of pipe to be coloured by GI/LLDPE caps for user safety. The equipment to be fixed on ground with concrete of minimum strength M25 and J shaped welded bolts and once the concrete is set, fix the equipment on to it and cover nuts and bolts with the base plate cover, all complete as per direction and approval of Engineer-in-Charge regarding material, shape of equipment, colour on metal, seat and base cover plate and fixing of equipment etc. .Including Contractor Profit, overhead charges, GST and all others charges

Seated Chest Press :- Providing, designing and fixing Seated Chest Press of Pull pair of size 1800 X 700 X 2000 mm fabricated with main post of 140mm dia and 3.00 mm thick and other pipes of 40mm dia 3.00mm thick all pipes made up of hot rolled tubular steel and hot dipped galvanized, and powder coated using Akzo Nobel or equivalent of 80-120 micron thick. All welding joints of pipe are robotic welded with joints scalloped as necessary and dressed off removing sharp edges and burrs. Zinc primer paint to be applied at all . Including Contractor Profit, overhead charges, GST and all others charges.

Supply, erection and installation of ISI mark uPVC corrugated sheet for roofing of gazebo with provision and fixing of sheet with J-bolts complete in the satisfaction of engineer-in-charge.

Supply of street light electric meter of 2 Kw capacity three phase and providing connection of street lights with the meter, payment to the contractor will be made as per actual slip received from the UHBVN

Arch Swing 2 Seater Product Area: 3.0mt x 1.50m Safe Play Area: 4.5m x 3.0m Height of Swing: 2.10m from GL Width of Swing: 2.80 to 3.0m Of Beam (2 Seater) Main Frame 62mm OD And Beam x 2.2mm Thick GI Pipe Seat - Seat Attached from Beam with Help of Rubber Coated G.I. Chain with Nylon Seated Straps

Cast Iron Benches made up of M.S. Sheet 1.6 mm thick with laser cutting as per approved design with name and length of Bench 5 ft and height 3 feet. MS Square tubes 50*50*4mm.70 kg per bench. (The rate Is inclusive of the cost of loading, unloading and transportation and including the charges of paint for lettering of the text as provided by the Engineer-in-charge). including GST