Supply, erection and Commissioning of seed Processing Machinery of Capacity 2MT/hr for 7 Seed Processing Units and Accessories at various places across Tamil Nadu.

DUMP PIT WITH FEED HOPPER Dump hopper of Capacity 1.5 m3 at 12% moisture content, with heavy duty detachable grating for easy and quick cleaning of hopper. Hopper should be made out of MS Sheet of 2.0 mm thickness. It shall be provided with manually operated feed control mechanism. Dump hopper shall be installed in the pit in such a way that grating of the hopper is at floor /ground level to facilitate feeding of seeds in the hopper manually. Pit cover should be provided for safety.

VERTICAL BUCKET ELEVATOR (TO FEED SEED CLEANER) V.B. Elevator to feed seed to processing machines suitable for Wheat, Paddy, self-cleaning type boot section and discharge spouts etc. having following Specification: Capacity : 2-3 Ton/hr. Paddy. Basis; Discharge Type: Centrifugal Discharge ; Sheet metal parts and casing MS sheet Thickness Head Casing Sheet = 2 mm thick & CNC punched (M.S). Boot Casing Sheet = 2.5 mm thick & CNC punched (M.S). Leg Casing Sheet = 1.6 mm thick & CNC punched (M.S).; Bucket Material : Nylon ; Belt : Rubberized canvass material, Belt speed not more than 1.0 m/sec. ; Head and boot pulley: Crowned type.; Discharge height: As per machine feed hopper height. ; Speed Reduction :By Gear Box of Suitable Gear reduction ratio ; Elevator Gear Motor : Gear motor Power build/Premium make Not More than 2.0 HP 3Phase,440 V Crompton/ABB/or Equivalent make along with starter in panel board.; Construction : Painted Steel. ; Accessories : Service Platform, Spouting, input hopper, Ladder, discharge valve, pit cover and grating in first elevator etc.

SEED CLEANER Pre cleaner machine is required for various pulses and cereal and Oil Seeds from crop seed/grains with compressed plywood sieve deck, three screen Layers, bouncing ball screen cleaning system & screw auger for rejected seeds outlet, double aspirations, having following technical specifications. All M.S sheets components of this machine made on CNC Machine.Total screen area : 4 m2 ; Length of Screens : Minimum 500 cm Seed travel length on perforated screen. ; Screen sizes 1) Top Screen:100 cm x 80 cm (L x B) - 1 No. (GI Sheet), 2)Middle Screen: 100 cm x 80 cm (L x B) - 2 No. (GI Sheet) 3)Bottom Screen: 100 cm x 80 cm (L x B) - 2 No. (GI Sheet); Capacity : 2 TPH PADDY BASIS ; Blower system : Centrifugal type blower, Motor = 5HP. 3Phase,440 V Crompton/ABB/or Equivalent make., Air volume = 5000 CMH.,Blower fan dynamically balanced. ; Sieve Boat Motor = 1.5 HP.3Phase,440 V Crompton/ABB/or Equivalent make. Construction = Compressed Seasoned Double-Sided Pre laminated plywood 21 mm (± 0.5).

Cleaning System= Sieves cleaning by rubber balls. Sieve boat have zig zag slots all along guide for ease of taking out screens. ; Machine structure Machine Vertical C steel channels cnc punched: 208 x 60 x 3mm.Machine horizontal C steel channels cnc punched: 120 x 60 x 3mm. ; Aspiration chamber : Aspiration chamber side steel plates min 2.5mm thick. Aspiration chamber partition plates min.1.6mm thick. Aspiration chamber top cover min 1.6mm thick. No. of Aspirations 02 Nos. (Pre & Post ). ; Outlet chutes : Min.1.6mm ; Auger : 1 no screw conveyor (for removing light impurities). Auger housing sheet thickness = 1.6 mm Auger screw conveyor sheet thickness = 2 mm. R.P.M = 120-125 ; Feed Roller : R.P.M = 30-35 , Diameter = 16.5 cms; Bearing Make : NTN /SKF ; Deck Oscillation : 300-320; Deck Screen Slope Top Screen 7.5° Middle Screen 12.5° Bottom Screen 16° ; Outer Construction : Painted Steel. ; Power Supply : 440V, 3 Phase AC. ; Cyclone with ducting : For Dust collection. ; Foundation Frame : For fixing machine made of c- channel. ; Optional accessories : one set including.

VERTICAL BUCKET ELEVATOR TO FEED SEED GRADER V.B. Elevator to feed seed to processing machines suitable for Wheat, Paddy, self-cleaning type boot section and discharge spouts etc. having following Specification:Capacity: 2-3 Ton/hr. Paddy. Basis ; Discharge Type: Centrifugal Discharge ; Sheet metal parts and casing MS sheet Thickness: Head Casing Sheet = 2 mm thick & CNC punched (M.S). Boot Casing Sheet : 2.5 mm thick & CNC punched (M.S). Leg Casing Sheet : 1.6 mm thick & CNC punched (M.S). ; Bucket Material: Nylon ; Belt: Rubberized canvass material, Belt speed not more than 1.0 m/ sec. ; Head and boot pulley Crowned type. ; Discharge height: As per machine feed hopper height. ; Speed Reduction By Gear Box of Suitable Gear reduction ratio ; Elevator Gear Motor: Gear motor Power build/Premium make Not More than 2.0 HP 3Phase,440 V Crompton/ ABB /or Equivalent make along with starter in panel board. ; Construction: Painted Steel. ; Accessories: Service Platform, Spouting, input hopper, Ladder, discharge valve,etc.11.1 Impleller height = min 8.5 Cm. Sieve Boat Motor = 2 HP.3Phase,440 V Crompton/ABB/or Equivalent make Construction = Compressed Seasoned Double- Sided Pre laminated plywood 21 mm (± 0.5). Cleaning System = Sieves cleaning by rubber balls. Sieve Boat length and width are 291 cm X 129 cm x 80 cm, Sieve boat has zig zag slots all along guide for ease of taking out screens. ; Machine structure: Overall Dimensions (L X W X H) = 292 cm X 146 cm X

147 cm. Machine Vertical C steel channels cnc punched 208x60x3mm. Machine horizontal C steel channels cnc punched 120x60x3mm. ; Aspiration chamber: Aspiration chamber side steel plates min 2.5 mm thick. Aspiration chamber partition plates min.1.6 mm thick. Aspiration chamber top cover min 1.6 mm thick. Aspiration chamber size 300cms x 134 cms x 89cm. No. of Aspirations 02 Nos. (Pre & Post). Volume = 2 m3, Post aspiration chamber size (L X W X H) = 23 cm X 134 cm X 131 cm. ; Outlet chutes Min.1.6mm ; Auger: 2no screw conveyor (for removing light impurities) having length 205 cm. Auger housing dimensions (L x W x H) = 150 cm x 23 cm x 18 cm. Auger housing sheet thickness = 1.6 mm, Auger screw conveyor sheet thickness = 2 mm.; Feed Roller R.P.M = 18-20, Length = 130 cm Diameter = 16.5 CMS Shaft length = 158 cm ; Bearing Make NTN /SKF ; Deck Oscillation 300-320 ; Deck Screen Slope: Top Screen 4°, Middle Screen 6°, Bottom Screen 6° ; Outer Construction Painted Steel. ; Power Supply 440V, 3 Phase AC. ; Cyclone with ducting For Dust collection. ; Foundation Frame For fixing machine made of c- channel. Foundation Frame Dimensions (L X W X H) 292 cm x 146 cm x 110 cm. Optional accessories one set including.

SEED GRADER Seed Cleaner cum Grader suitable for Wheat, Paddy, and other crops seeds to remove impurities from good seeds etc. having following Specifications. The total available seed travel length of perforated screen minimum 560 cm giving highest opportunity to all seeds to come in to contact with screen apertures and thereby very high cleaning and grading efficiency.Total screen area: 7 m2 ; Length of Screens: Minimum 560 cm Seed travel length on perforated screen. ; Screen sizes 1)Top Screen: 80 cm x 125 cm (L x B) - 1 No.(GI Sheet) 2)Middle Screen: 80 cm x 125 cm (L x B) - 3 No. (GI Sheet) 3)Bottom Screen: 80 cm x 125 cm (L x B) - 3 No. (GI Sheet) Ball’s Frame Grid (GI Sheet): 24 no’s grids provided on each balls frame and each grid contains 5 no. bouncing balls for effective cleaning of screens. ; Input Capacity: 2 TPH PADDY BASIS ; Input Hopper: Over all dimensions (L X W X H) = 84 cm X 60 cm X 55 cm. Capacity = 178 kg sheet thickness = 1.6 mm ; Blower system Centrifugal type blower Outer housing (L X W X H) = Min 122 cm X 119 cm X 48 cm. Outer housing sheet thickness = 3 mm Motor = 7.5 HP . 3Phase,440 V Crompton/ABB/or Equivalent make. Air volume = 8500 CMH, Impeller diameter = Min 75 cm

INDENT CYLINDER- 2TPH PADDY BASIS WITH BYPASS ARRANGEMENT Capacity : 2 Ton/hr. Paddy Basis; Function : To remove cut and short grains from seeds I.e wheet, paddy etc. ; Motor : 3 HP. 3Phase,440 V Crompton/ABB/or Equivalent make. Construction : Mild Steel with bypass arrangement.

VERTICAL BUCKET ELEVATOR (TO FEED SPECIFIC GRAVITY SEPARATOR) V.B. Elevator to feed seed to processing machines suitable for Wheat, Paddy, self-cleaning type boot section and discharge spouts etc. having following Specification:Capacity 2-3 Ton/hr. Paddy. Basis ; Discharge Type: Centrifugal Discharge; Sheet metal parts and casing MS sheet Thickness Head Casing Sheet = 2 mm thick & CNC punched (M.S).; Boot Casing Sheet = 2.5 mm thick & CNC punched (M.S). Leg Casing Sheet = 1.6 mm thick & CNC punched (M.S). ; Bucket Material: Nylon; Belt: Rubberized canvass material, Belt speed not more than 1.0 m/ sec.; Head and boot pulley Crowned type.; Discharge height: As per machine feed hopper height.; Speed Reduction By Gear Box of Suitable Gear reduction ratio; Elevator Gear Motor: Gear motor Power build/Premium make Not More than 2.0 HP 3Phase,440 V Crompton/ABB/or Equivalent make along with starter in panel board.; Construction: Painted Steel.; Accessories: Service Platform, Spouting, input hopper, Ladder, discharge valve,Pitover and grating in first elevatore etc.

SPECIFIC GRAVITY SEPARATOR 2 TPH The machine to removes impurities and upgrades the material on the principle of specific weight of seeds and make four grades of seeds to collect and pack separately into the containers. The deck is made of wood. The Stainless wire mesh screen provided at the top of the deck. The diverters provided to divert good, middling, and low grade into different chutes.Capacity: 2 TPH Paddy Basis. ; N.o of fans: 7 No’s (fans dynamically balanced); Feeding device: Regulated with gear and pinion operated shutter. Air control system Individual adjustable; Gravity Deck: Type of deck =Rectangular type deck with length of 300 cm and width 120 cm made of high-quality wood and steel frame. Deck area = 3.60 sq. meter. Deck oscillation= Deck oscillation speed range with VFD make of ABB/ SIEMENS/or Equivalent. Inclination of deck = Manual operated (adjustable side slope and end slope).; Electrical drives 10 HP drive for fan blower and 3 HP drive of deck oscillation make of siemens / Kirloskar or equivalent make. Bearings Make NTN / SKF; Filters: SS made wire mesh filters fitted.; Bin 200 kg capacity: To store and to feed gravity separator, optional Accessories: one set additional.

DIGITAL MOISTURE METER Body: Alloy steel ; Test cup: Stainless steel; Test cup visible while giving pressure: Yes; Ratchet handle: Stainless steel; Transducer: High compression unit removes the porosity effect.; Minimum sample of grain: More than 30 cubic cent Meter with accessories can display Date & Time Print & Record. Date & Time Temperature & Moisture reading.; Lead screw guide unit: Made on Stainless steel & are Interchangeable; Depositor detail: Depositor can store his name & details; Re-calibration with oven Can be done on all commodities Independently; Range : 3.5 to 40%; Consisterey: +0.2%; Priniciple: Resistance; Display: 2x16 character alphanumeric LCD Display; Temperature compensation: Automatic; Temperature sensor: PT-100; Auto Calibiration: Automatic using a simple key operation; Averaging: It can have average of no. of readingsRecal ; Facility: It has facility to recall last reading; Keypad: 9 keys membrane keypad; Power: 9 VDC Adaptor 230V, 50Hz, or 6(R-20) type dry cells.; Data logging: Can record temperature & moisture at various date & time; Data Storage Capacity: It has memory of 200 readings Robust Design: No need of the rods.; Size (L x B x H): 12.5x18 x25.9 cm (Approx); Weight: 12.2 Kg (Approx)

Control Panel for complet pannel

HEAVY DUTY BAG CLOSER Sewing Speed: Efficient production: Maximum sewing speed 1600-1800 stitches per minute ; Dimensions: 12 in. H x 12in. W x 13in. D (30 cm x 30 cm x 33 cm) ; Stich Length: 3.5 stitches/inch (25.4mm) Fixed ; Maximum Material Thickness: 10mm; Cutter Type: Mechanical ; Thread:80z. Cotton or Synthetic thread cones; Needle size: DB x 1 200/25 Groz-Beckert; Power Requirments: AC/DC Motor 1/10 Hp 8000 rpm 220V. 1.3 amps; Weight: 6 kg.; Type of stich:single thread/chain stitch; Closing-Speed: 5-8 sec/bag, 39 fpm at 3 5 stitches/inch (25.4mm); Types of bags: All kinds of multi-wallpaper, kraft-papper, burlap, cotton, PP/PE, Hessian,woven polyester, jute bags etc; Lubricant:For extended lubrication and wear, use SAE 30 oil.;

WEIGHING SCALE 300 KG

FUMIGATOR

LADDER 20 FT

AIR COMPRESSOR

MANUAL CART 2 NOS

SEALING MACHINE

Please Enable Macros to View BoQ information