ESTIMATE FOR REPAIR AND RESTORATION OF UNDERGROUND OUTLET AT RD. 6974 MTR OF MEHNGROWAL DISTRIBUTORY OF KANDI CANAL STAGE -II

Amount

WATER SUPPLY Excavation by mechanical means(JCB or Hydraulic excavator) in trenches for pipe lines with straight or open cutting in streets or open area including trimming and dressing sides levelling of beds of trenches to correct grade, cutting joint holes, refilling consolidation,watering , including the cost of dewatering of rain water, diversion for traffic, night signals. providing & fixing caution boards, crossing over trenches for access to the houses, watching, fencing, etc. and removal of surplus soil out side/inside the town involving lead upto 15 meter complete in all respect. Earth work upto 1.5 m. Depth for All classes of soil except rocky

Development and Stabilizing of the tubewell with air compressor of required capacity as directed by the engineer-in- charge including cost of tools, appliances & consumable to the satisfaction of Engineer-in-charge. Capacity of Air compressor 300 cfm at 250 PSI

Providing & fixing Single air valve ISI Marked as per IS-14845 including jointing , cost of nut bolts & rubber insertion all carriages complete. C.I Single air valve screwed (Size 50mm)

Construction of masonary Sluice Valve Chamber excluding Sluice valve cover as per standard design & drawings of public health department. Size 0.9 m. x 0.9 m.

BRICK WORK First class burnt brick work laid in cement sand mortar 1:5 in foundation and plinth

PLASTERING & POINTING 12.5 mm thick cement plaster 1:2

Providing, Laying, fixing & jointing of 125 mm U.P.V.C pipes @ 2.5 kgf pressure as per ISI-4985(ISI marked with the prior approval of Engineer in charge) along the trenches and laying the same in trenches to correct alignment and gradient, cutting, jointing and testing complete as per specifications

Providing, Laying, fixing & jointing of 140mm U.P.V.C pipes @ 2.5 kgf pressure as per ISI-4985(ISI marked with the prior approval of Engineer in charge) along the trenches and laying the same in trenches to correct alignment and gradient, cutting, jointing and testing complete as per specifications

Providing, Laying, fixing & jointing of 160 mm U.P.V.C pipes @ 2.5 kgf pressure as per ISI-4985(ISI marked with the prior approval of Engineer in charge) along the trenches and laying the same in trenches to correct alignment and gradient, cutting, jointing and testing complete as per specifications

Providing, Laying, fixing & jointing of 180 mm U.P.V.C pipes @ 2.5 kgf pressure as per ISI-4985(ISI marked with the prior approval of Engineer in charge) along the trenches and laying the same in trenches to correct alignment and gradient, cutting, jointing and testing complete as per specifications

Providing, Laying, fixing & jointing of 200 mm U.P.V.C pipes @ 2.5 kgf pressure as per ISI-4985(ISI marked with the prior approval of Engineer in charge) along the trenches and laying the same in trenches to correct alignment and gradient, cutting, jointing and testing complete as per specifications

Providing, Laying, fixing & jointing of 280 mm U.P.V.C pipes @ 2.5 kgf pressure as per ISI-4985(ISI marked with the prior approval of Engineer in charge) along the trenches and laying the same in trenches to correct alignment and gradient, cutting, jointing and testing complete as per specifications

Supply & fixing 125 mm UPVC Long bends of 90degree of 6kgf pressure conforming to IS-codes with latest amendments if any at site of work including loading, unloading and rehandling if any complete in all respects as per design and P.W.D. specifications and instructions of engineer in charge. 90degree

Supply & fixing 140mm UPVC Long bends of 90degree of 6kgf pressure conforming to IS-codes with latest amendments if any at site of 5.00 each work including loading, unloading and rehandling if any complete in all respects as per design and P.W.D. specifications and instructions of engineer in charge. 90degree

Supply & fixing 160 mm UPVC Long bends of 90degree of 6kgf pressure conforming to IS-codes with latest amendments if any at site of 5.00 each work including loading, unloading and rehandling if any complete in all respects as per design and P.W.D. specifications and instructions of engineer in charge. 90degree

Supply & fixing 180 mm UPVC Long bends of 90degree of 6kgf pressure conforming to IS-codes with latest amendments if any at site of 5.00 each work including loading, unloading and rehandling if any complete in all respects as per design and P.W.D. specifications and instructions of engineer in charge. 90degree

Supply & fixing 200 mm UPVC Long bends of 90degree of 6kgf pressure conforming to IS-codes with latest amendments if any at site of 5.00 each work including loading, unloading and rehandling if any complete in all respects as per design and P.W.D. specifications and instructions of engineer in charge. 90degree

Supply & fixing 280 mm UPVC Long bends of 90degree of 6kgf pressure conforming to IS-codes with latest amendments if any at site of 5.00 each work including loading, unloading and rehandling if any complete in all respects as per design and P.W.D. specifications and instructions of engineer in charge. 90degree

Providing & fixing 125 mm alpha valve including carriage, rehandling, loading, unloading, testing, etc. complete in all respect as per 5.00 each PWD specifications or instructions of the engineer in charge.

Providing & fixing 140 mm alpha valve including carriage, rehandling, loading, unloading, testing, etc. complete in all respect as per 5.00 each PWD specifications or instructions of the engineer in charge.

Providing & fixing 160 mm alpha valve including carriage, rehandling, loading, unloading, testing, etc. complete in all respect as per 10.00 each PWD specifications or instructions of the engineer in charge.

Providing & fixing 180 mm alpha valve including carriage, rehandling, loading, unloading, testing, etc. complete in all respect as per 5.00 each PWD specifications or instructions of the engineer in charge

Providing & fixing 200 mm alpha valve including carriage, rehandling, loading, unloading, testing, etc. complete in all respect as per 10.00 each PWD specifications or instructions of the engineer in charge.

Providing & fixing 280 mm alpha valve including carriage, rehandling, loading, unloading, testing, etc. complete in all respect as per 5.00 each PWD specifications or instructions of the engineer in charge.

Supply & fixing of 125 mm UPVC equal-Tee of 6 kg/cm2 pressure conforming to IS-codes with latest amendments if any at site of work. including carriage, rehandling, loading , unloading ,testing etc. complete in all respects as per PWD specifications or instructions of the Engineer-in-charge

Supply & fixing of 140 mm UPVC equal-Tee of 6 kg/cm2 pressure conforming to IS-codes with latest amendments if any at site of work. including carriage, rehandling, loading , unloading ,testing etc. complete in all respects as per PWD specifications or instructions of the Engineer-in-charge

Supply & fixing of 160 mm UPVC equal-Tee of 6 kg/cm2 pressure conforming to IS-codes with latest amendments if any at site of work. including carriage, rehandling, loading , unloading ,testing etc. complete in all respects as per PWD specifications or instructions of the Engineer-in-charge

Supply & fixing of 180 mm UPVC equal-Tee of 6 kg/cm2 pressure conforming to IS-codes with latest amendments if any at site of work. including carriage, rehandling, loading , unloading ,testing etc. complete in all respects as per PWD specifications or instructions of the Engineer-in-charge

Supply & fixing of 200 mm UPVC equal-Tee of 6 kg/cm2 pressure conforming to IS-codes with latest amendments if any at site of work. including carriage, rehandling, loading , unloading ,testing etc. complete in all respects as per PWD specifications or instructions of the Engineer-in-charge

Supply & fixing of 280 mm UPVC equal-Tee of 6 kg/cm2 pressure conforming to IS-codes with latest amendments if any at site of work. including carriage, rehandling, loading , unloading ,testing etc. complete in all respects as per PWD specifications or instructions of the Engineer-in-charge

supply and fixing 125 mm socket 6kg/cm2 including carriage , re-handling, loading ,unloading , testing , etc. complete In all respect as per PWD specification and instructions of the Engineer-in-charge.

supply and fixing 140 mm socket 6kg/cm2 including carriage , re-handling, loading ,unloading , testing , etc. complete In all respect as per PWD specification and instructions of the Engineer-in-charge.

supply and fixing 160 mm socket 6kg/cm2 including carriage , re-handling, loading ,unloading , testing , etc. complete In all respect as per PWD specification and instructions of the Engineer-in-charge.

supply and fixing 180 mm socket 6kg/cm2 including carriage , re-handling, loading ,unloading , testing , etc. complete In all respect as per PWD specification and instructions of the Engineer-in-charge.

supply and fixing 200 mm socket 6kg/cm2 including carriage , re-handling, loading ,unloading , testing , etc. complete In all respect as per PWD specification and instructions of the Engineer-in-charge.

supply and fixing 280 mm socket 6kg/cm2 including carriage , re-handling, loading ,unloading , testing , etc. complete In all respect as per PWD specification and instructions of the Engineer-in-charge.

The jandoli co-op l&c society ltd.