Loading…
Tenderkart now works inside Claude and ChatGPT: search and analyse tenders right from your chat
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹4.3 LAccepted-AOC RAMPUR PANCHAYAT MAHARAJAHAT MAHARAJAHAT RAIGANJ NORTH DINAJPUR UTTAR WEST BENGAL 733156 | DINAJPUR UTTAR | WEST BENGAL | 733156 | L1 | Accepted-AOC Stands L1 and Satisfactory | |
| 2 | L2₹4.4 L+₹4,326.71 (1.00%)Rejected-Finance UPPER CHELIDANGA ASANSOL PASCHIM BARDDHAMAN | ASANSOL | PASCHIM BARDDHAMAN | WEST BENGAL | L2 | Rejected-Finance Stands L2 | |
| 3 | L3₹4.4 L+₹6,491.08 (1.50%)Rejected-Finance KALYANESWARI PASCHIM BARDHAMAN WEST BENGAL | KALYANESWARI | PASCHIM BARDHAMAN | WEST BENGAL | L3 | Rejected-Finance Stands L3 | |
| 4 | L4₹4.4 L+₹8,445.83 (1.95%)Rejected-Finance 266 1 S B GORAI ROAD BESIDE VIDYASAGAR MAIDAN ASANSOL 713301 | ASANSOL | BURDWAN | WEST BENGAL | 713301 | L4 | Rejected-Finance Stands L4 |
Tender Value
Refer Docs
EMD Value
₹9,500
Closing Date
16 Sept 2022, 3:30 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
Executive Engineer Asansol Mech Divn PHE Dte
Janasasthya Karigori Bhaban, Sen-Releigh Road, Opp ESI Hospital, Asansol - 05
Repairing of indoor and outdoor lighting arrangement, making of temporary chlorination shade including other allied work at Panuria High Lift Pump House Gourandi under Jamgram - Panuria Water Supply Scheme.
2022_PHED_400166_2
WBPHE /EE/AMD/NIT 19e / 2022-2023
Open Tender
Electrical Work/ Equipment
Item Wise
10 days
Panuria
Please refer Tender documents.
3 documents required · 3 mandatory
₹9,500
13 Oct 2022
31 Aug 2022
19 Sept 2022
31 Aug 2022
16 Sept 2022
31 Aug 2022
Amount
Supplying and fixing 415V, 315A, TPN SFU with sheet steel enclosure on flat iron/angle iron frame on wall with nuts bolts etc incl. S & F 3 nos. DIN type HRC fuse as per rating. Make-L&T/Havells/Siemens/ABB/Other Approved make
Supply & fitting fixing of 315 amp 4 way wall mounting type Bus bar Chamber. Make-havells/Standard/L & T/Other Approved make.
Supplying and fixing double door Vertical 4 Way TPN MCB Distribution board with bus bar mounted on wall & mending good the damages to original finish incl. Inter connection with suitable size of copper wire and neutral link & provision for earthing attachment. (4 way) Standard / Legrand / Havells / L&T / Seimens]. This including the cost for supplying and fixing as Incomer- 63A TPN MCB- 1no & Out going- 16A SP MCB - 2 nos, 20 Amp SP MCB of Breaking capacity 10kA-2 Nos., 32A TP MCB-2 Nos. , on din rail of existing DBs and necessary connection . [Havells/Standard/Legrand / L&T / Seimens].
Supply & delivery of 4 core 10 Sq mm., 1.1kV grade, Aluminum Conductor, Armored, PVC Cable (Make GLOSTER/NICCO/Polycab/Mescab/Havells/ Other Approved Make)
Laying of cable upto 4 core 10 sqmm on wall/surface incl. S & F MS saddles with earthing attachment in 10 SWG GI (Hot Dip) Wire, making holes etc. as necy. mending good damages and painting
Supply & fitting of compression type cable gland complete with brass gland rubber ring for dust & moisture proof of PVC Al. cable as follows. i) 4 Core, 10 Sq. mm
Finishing the cable end of the 4 core 10 Sq. mm. cables by crimping method by supplying lugs, sockets taps & other jointing materials.
Supplying & Fixing GI Modular Switch Board of the following sizes complete with three no. suitable size Copper bar with holes (for Ph, N & E) fixed on bakelite over the MS welded chairs incl. top cover flushed in wall for housing the board after cutting the brick wall incl. making earthing attachment, painting and mending good damages to building works. a) 8 Module
Supply & Fixing 240 V 6 A Modular type switch (Brand approved by EIC) on existing GI Modular type switch board having top cover plate and making necessary connections as required.
Supply & Fixing 240 V, 6A, 5 pin Modular type plug socket (Brand approved by EIC), without switch & plug top, on existing GI Modular type switch board with top cover plate and making necy. connections with PVC Cu wire and earth continuity wire etc.
Supplying & Fixing Industrial Plug & Socket board with 240 V, 20A, SPN & Earth Metal Industrial Plug socket & 20A Industrial top incl. S&F 20 A SP MCB breaking capcity 10kA (C- Curve) in SS enclosure fixed on wall and cecessary conection.
Supply fitting fixing of 25 mm GI Conduit 1.6 mm thick.
Supplying and Drawing 1.1 KV single core stranded 'FR' PVC insulated & unsheathed single core stranded copper wire (Standard/Havells/Mescab/Polycab) of the following sizes in the prelaid pipe and by the prelaid GI fish wire and making necy. connection as required.
3 x 1.5 sqmm
3x4 sqmm
3x6 sqmm
Supply & delivery of following electrical accessories at site :-
21W LED Tube set with extruded aluminium batten suitable for surface/wall (with accessories). Make-Philips, Smartbright, BN021C LED 22S PSU CW GR)
115W road lighting luminaries with single die ceramic base high power LED light source, PDC housing, toughened glass cover and unique peanut lens to ensure uniform light distribution, higher spacing between poles and maintenance free system. Make-Philips, BRP409 LED 115 CW SLC FG GR V2
Post Top lantern with symmetric light distribution and limited upward light component with IP65 protection. Make-Philips, BGP161 LED2500/NW PSU 220-240V 7043 IN
1200 mm, 1ph ceiling fan. (Make-Havells, Maxvel)
Supplying & fixing 40 mm dia medium gauge GI Pipe ( ISI-Medium) Protection with necessary fittings and jointing metarials as required.
Supply, delivery and fitting, fixing on wall of outdoor type joint box 200 x 150 x 100 mm deep made out of 4 mm thick sheet steel, comprising 4 way terminal, 250 V 15 A Kitkat fuse unit, one NL on porcelain insulator, 2 nos hole for 6 core 4 Sq mm Al Ar cable gland, hinged door and rubber lined gasket, earthing terminal etc. including painting with anti-corrosive epoxy paint.
Fixing only light fitting complete with all accessories sets Directly on wall/ceiling with HW block and suitable size MS fastener, Ceiling plate, nipples etc. as required (For LED tube sets)
Fixing only outdoor / street light type fluorescent light fitting or MV light fitting complete with all accessories to be fixed /projected from the wall of the building incl. making holes/providing clamping arrangement & necy. GI reducer as required. S&F 40 mm GI pipe (ISI-Medium) quality 1.5 mts. average length having suitable bend S&F necy. length of 1.5 sqmm PVC insulated single core stranded annealed copper wire and making connections as required and mending good damages to wall incl. painting etc.
Dismantling and lowering of damaged defective lighting fixture from top of 9 mtr Pole all complete as per direction of EIC.
Fitting & fixing of the outdoor lighting luminaries along with new lighting luminaries to the pole etc as per direction.
Fitting & fixing of the above supplied Gate light after dismantling of the damaged one as per direction.
Supply & drawing 3 core 2.5 Sq.mm. PVC insulated copper wire (Havells/ Mescab/Polycab) from joint box to bottom of LED fixture at the top of the pole & gate light for making interconnection complete
Finishing of the 2.5sqmm PVC insulated wire ends by socketting with pin/ring type copper sockets and insulated tapes etc., including supplying sockets, tapes.
Earthing with G. I. Earth spike. (1822 x 20mm ) and grouted the same under the ground level as per direction.
Painting of Steel Tubular Pole of lengths and no. of coats of paint, as given below with ready mixed paint/primer of approved make, and brand incl. preparation of surface by sand paper/emery paper, cleaning etc. for receiving fresh coat of paint.
Upto 9.0 mtr. long pole
One coat of red lead/Zinc chromate priming
(i) 1st coat of aluminium paint over 1 coat of RO priming
(ii) 2nd coat of aluminium paint over 1st coat
Supply delivery of 1H.P MK1 DOL Starters Suitable for Pump/Motor 3Ø, Relay Range (A)-(1.5-2.5) (Make-L&T, SS96210POPO,
Surface Dressing of the ground in any kind of soil including removing vegetation inequalities not exceeding 15 cm depth and disposal of the rubbish within a lead upto 75 m as directed.
Earth work in excavation of foundation trenches or drains, in all sorts of soil (including mixed soil but excluding laterite or sandstone) including removing, spreading or stacking the spoils within a lead of 75 m. as directed. The item includes necessary trimming the sides of trenches, levelling, dressing and ramming the bottom, bailing out water as required complete.
(a) Depth of excavation not exceeding 1,500 mm.
Filling in foundation or plinth by silver sand in layers not exceeding 150 mm as directed and consolidating the same by thorough saturation with water, ramming complete including the cost of supply of sand. (payment to be made on measurement of finished quantity)
Single Brick Flat Soling of picked jhama bricks including ramming and dressing bed to proper level and filling joints with local sand.
Ordinary Cement concrete (mix 1:1.5:3) with graded stone chips (20 mm nominal size) excluding shuttering and reinforcement if any, in ground floor as per relevant IS codes. (i) Pakur Variety
Brick work with 1st class bricks in cement mortar (1:4) a) In foundation and Plinth b) In superstructure, ground floor
125 mm. thick brick work with 1st class bricks in cement mortar (1:4) in ground floor.
Plaster (to wall, floor, ceiling etc.) with sand and cement mortar including rounding off or chamfering corners as directed and raking out joints including throating, nosing and drip course, scaffolding/staging where necessary (Ground floor).[Excluding cost of chipping over concrete surface] i) With 1:4 cement mortar. (a) 20 mm thick plaster. i) With 1:4 cement mortar, (a) 20 mm thick plaster
Neat cement punning about 1.5mm thick in wall, dado, window sill, floor etc.NOTE:Cement 0.152 cu.m per100 sq.m.
Hire and labour charges for shuttering with centering and necessary staging upto 4 m using approved stout props and thick hard wood planks of approved thickness with required bracing for concrete slabs, beams and columns, lintels curved or straight including fitting, fixing and striking out after completion of works (upto roof of ground floor)
(When the height of a particular floor is more than 4 m the equivalent floor height shall be taken as 4 m and extra for works beyond the initial 4 m ht. shall be allowed under 12 (e) for every 4 m or part thereof)
(a) 25 mm to 30 mm thick wooden shuttering as per decision & direction of Engineer-In-Charge
M.S. structural works with hollow sections of pipe (square or rectangular shape) conforming to IS: 806-1968 & IS:1161-1998) connected to one another with bracket, gusset, cleat as per design, drawing & direction of Engineer-in-Charge complete including cutting to requisite shape & size, fabrication including metal arc welding conforming to IS: 816-1969 & IS: 9595 using electrodes of approved make and brand conforming to IS:814- 2004, haulage, hoisting and erection all complete. The rate includes the cost of all M.S. Hollow section, all consumables such as electrodes, gas and hire charges of all tools and plants and labour reqired for execution and all incidental chages (such as electricity, labour insurance) etc. complete.
Payment to be made on the basis of calculated weight of structural memebrs of MS Holow Section as specified in relevent IS code in finished work. Payment for gusset, bracket, cleat may be made by adding the actual weight of such items with weight of finished structural members. The rates are considered for a hight of erection 8 m. / 2nd floor level from the ground. Add 1.5 % extra over the rate for each additional floor or 4m. beyond the initial 8 m. or part thereof.
i) For roof truss works
a) Span up to 12 Mtr
Supplying , fitting & fixing Zn-Al alloy (55% Al & 45% Zn) coating of 150 grams per sq. metre (followed by colour coated on both side) steel sheet work having minimum yield strength of 550 Mpa of trapizoidal profile of approved make (excluding the supporting frame work) fitted and fixed with 55 mm & 25 mm self tapping screw, EPDM Washer 16 mm dia & 3 mm th. washer etc. complete with 150 mm end lap and one corrugation minimum side lap. (Payment to be made on area of finished work). (i) In Roof:-a) With 0.5 mm thick sheet
Priming one coat on steel or other metal surface with synthetic oil bound primer of approved quality including smoothening surfaces by sand papering etc.
Painting with best quality synthetic enamel paint of approved make and brand including smoothening surface by sand papering etc. including using of approved putty etc. on the surface, if necessary :On steel or other metal surface : With super gloss (hi-gloss) . i) Two coat (with any shade except white)
Installation and commissioning of Departmental supplied chlorinator with all accessories, PVC tank and drawing of power line as [er IE rule by supplying of necessary wire and continuous earthing. This includes the cost of all necessary CC foundation (at least 200mm height) with concrete mixture (sand, cement, stone, chips) and net cement finish by supplying of all required materials and testing the entire set as per direction of EIC.(Power will be feed from PLC panel of pumping machinery)
Fixing only ceiling fan complete with blades, canopy, fork, rubber bush etc. incl. S&F connecting wire for down rod upto 30 cm incl. painting the rod with approved paint and making necessary connection as required by 2x1.5 sqmm flexible copper wire.
Add. GST@18%
Add. Cess@1%
Hindusthan Consultant Firm
SUNRISE ENGINEERING CORPORATION
M/S. SWAPAN BANERJEE
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .