Loading
Loading…
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
Tender Value
₹1.7 Cr
EMD Value
₹2.6 L
Closing Date
31 Jul 2025, 10:30 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
Krishna Bhagya Jala Nigam Limited
Executive Engineer
AME of 1st Head work of RLIS at Navali Village including repair/replacement/refurbishment of Electro Mechanical Equipments
KBJNL/2024-25/HL/WORK_INDENT1387/CALL-4
KBJNL/2024-25/HL/WORK_INDENT1387/CALL-4
Open
Head works for lift irrigation schemes
Two Tender Document System(Two Cover)
KBJNL Division NLBC Divn No 4 Rodalabanda
9 documents required · 9 mandatory
Executed in any one year the following minimum quantities of work (Cement Concrete - xxxx cum, Earthwork - xxxx cum, etc) (80% of peak rate of construction)
Tenderer or his identified Sub Contractor should possess valid Electrical License for executing building electrificatio works and should have executed similar electrical works totallng Rs. xxxxxx (not less than 50% of electrical works) n any one year
Tenderer or his identified Sub Contractor should possess valid license for executing water supply / sanitary engineering works and should have executed similar works totallng Rs. xxxxxx (not less than 50% of electrical works) n any one year
Owning the following key and critical equipment for this work (xxxx, xxxx, xxxx)
Total value of civl engineering works executed and payments received in the last five years (year-wise)
List of existing commitments and ongoing works
List of works for which tenders already submitted
Banker Details for reference
Construction equipment owned by the tenderer and equipment proposed to be deployed on this contract, if awarded
Reports on the financial standing of the tenderer, such as profit and loss statements and auditor’s reports for the last five years
Qualification and experience of the key technical and management personnel in permanent employment with the tenderer and those that are proposed to be deployed on this contract, if awarded
List of Financial Resources with Certificates
Satisfactoriy completed (atleast 90%) as prime contractor at-least one such similar work . Unloading, Removal of coupling, Dismantling and Re-building of V.T Pump of Discharge Capacity 16920 m3/Hr (4.70 Cumecs) or more. The value of workdone not less than Rs.100.89 LAKHS (50% of estimated cost of tender).
A valid copy of Class-I Electrical License from Electrical Inspectorate Govt of Karnataka.
Copy of Valid Employees Provident Fund Registration Certificate & remitted challan of last 6 months
BID CAPACITY- The bidders who meet the above specified minimum qualifying criteria, will only be qualified, if their available tender capacity is more than the total value. The available bid capacity is calculated as Assessed available Bid capacity- AxNx1.50 -B as per tender notification.i.e:171.00lakhs.
Minimum financial turn over i,e (Rs.403.56Lakhs) two times the estimated amount achieved in at least two financial years.
Liquid assets and /or availability of credit facilities of no less than Rs.51.30 Lakhs (30% of APT without GST)
The requisite Earnest Money Deposit in e-cash
Copy of Valid GST Registration Certificate & remitted challan of last 6 months.
Qualification information as per proformas with supporting documents as uploaded separately in the Tender Document
₹4,280
₹2.6 L
22 Jul 2025
22 Jul 2025
1 Aug 2025
25 Jul 2025
25 Jul 2025
AME of 1st Head work of RLIS at Navali Village including opeartion And maintenance of Electro Mechanical Equipments
Dismantling, Transportation, Assembling and Errection of Kinetic H42K 200 mm Dia Air valves etc., completge as per specification With All Lead and Lift As directed by the Engineer incharge of the wo...
Supply of Low pressure Flot balls valcanite coated seasoned wood for Kinetic 200 mm Dia Air vales etc. complete as per specification With All Lead and Lift As directed by the Engineer incharge of th...
Supply of High pressure Flot balls Rubber coated seasoned wood for Kinetic 200 mm Dia Air vales etc. complete as per specification With All Lead and Lift As directed by the Engineer incharge of th...
Supply of low Ressure Seat ring Natural Rubber for Kinetic 200 mm Dia Air vales etc. complete as per specification With All Lead and Lift As directed by the Engineer incharge of the work
Supply of cowel joint sporting ring for Kinetic 200 mm Dia Air vales etc. complete as per specification With All Lead and Lift As directed by the Engineer incharge of the work
Supply of M28 X 100 mm Nuts and bolts for Kinetic 200 mm Dia Air vales etc. complete as per specification With All Lead and Lift As directed by the Engineer incharge of the work
Supplying and fixing flange top and bottom for 200mm Dia k. Air vales
Dismantling, Transportation, Assembling and Errection of 1400 Dia Butterfiy valve motorised Head 30.00 Mtrs Discharge:4.70 Cumecs and As per specification With All Lead and Lift As directed by the ...
Supplying and fixing inside single door plate for 1400 Dia Butterfiy valve motorised Head 30.00 Mtrs Discharge:4.70 Cumecs and As per specification With All Lead and Lift As directed by the Enginee...
Supplying and fixing Shaft bearing for 1400 Dia Butterfiy valve motorised Head 30.00 Mtrs Discharge:4.70 Cumecs and As per specification With All Lead and Lift As directed by the Engineer incharge ...
Supplying and fixing disc seal for 1400 Dia Butterfiy valve motorised Head 30.00 Mtrs Discharge:4.70 Cumecs and As per specification With All Lead and Lift As directed by the Engineer incharge of t...
Supplying and fixing cotter pin for 1400 Dia Butterfiy valve motorised Head 30.00 Mtrs Discharge:4.70 Cumecs and As per specification With All Lead and Lift As directed by the Engineer incharge of ...
Supplying and fixing shaft Seal for 1400 Dia Butterfiy valve motorised 30.00 Mtrs Discharge:4.70 Cumecs and As per specification With All Lead and Lift As directed by the Engineer incharge of the ...
Supplying and fixing Disc Seal Ring (EPDM Rubber) for 1400 NB Butterfiy valve motorised Head 30.00 Mtrs Discharge:4.70 Cumecs and As per specification With All Lead and Lift As directed by the Eng...
Supplying and fixing copanion flange MS for 1400 NB Butterfiy valve motorised Head 30.00 Mtrs Discharge:4.70 Cumecs and As per specification With All Lead and Lift As directed by the Engineer inch...
Supply of SS bolts and nuts And washers Size M26X 75mm Material for butterfly valve and As per specification With All Lead and Lift As directed by the Engineer incharge of the work
Supply of SS bolts and nuts And washers Size M20X 75mm Material for butterfly valve and As per specification With All Lead and Lift As directed by the Engineer incharge of the work
Supplying and fixing of Reversing contractors, Thermo switch ,Close torque switch ,open tarqe switch , Close limit switch, open limit switch, space heater Termation Card, Electronic position transmit...
Supplying and fixing of clutch fork Assembely.Counter gear ,O Ring and oil seal ,Clutch ring ,Grease EPO ,for Actuator motors serviceing As per specification With All Lead and Lift As directed by t...
Supplying and fixing of End stop nut .travelling Nut .Clamping Nut .for Actuator motors serviceing As per specification With All Lead and Lift As directed by the Engineer incharge of the work
Dismantling, Transportation, Assembling and Errection of 1400 Dia Non Return valves Head 30.00 Mtrs Discharge:4.70 Cumecs and As per specification With All Lead and Lift As directed by the Engineer ...
Supplying and fixing inside single Disc plate for 1400 Dia Non Return valves Head 30.00 Mtrs Discharge:4.70 Cumecs and As per specification With All Lead and Lift As directed by the Engineer inchar...
Supplying and fixing Shaft bearing for 1400 Dia Non Return valves Head 30.00 Mtrs Discharge:4.70 Cumecs and As per specification With All Lead and Lift As directed by the Engineer incharge of the wo...
Supplying and fixing Body seat Ring for 1400 Dia Non Return valves Head 30.00 Mtrs Discharge:4.70 Cumecs and As per specification With All Lead and Lift As directed by the Engineer incharge of the ...
Supplying and fixing Hinge pin pin for 1400 Dia Non Return valves Head 30.00 Mtrs Discharge:4.70 Cumecs and As per specification With All Lead and Lift As directed by the Engineer incharge of the w...
Supplying and fixing Stop pin pin for 1400 Dia Non Return valves Head 30.00 Mtrs Discharge:4.70 Cumecs and As per specification With All Lead and Lift As directed by the Engineer incharge of the wo...
Supplying and fixing flug /Retainer for 1400 Dia Non Return valves Head 30.00 Mtrs Discharge:4.70 Cumecs and As per specification With All Lead and Lift As directed by the Engineer incharge of the...
Supplying and fixing Spring for 1400 Dia Non Return valves 30.00 Mtrs Discharge:4.70 Cumecs and As per specification With All Lead and Lift As directed by the Engineer incharge of the work
Supplying and fixing copanion flange MS for 1400 NB Non Return valves Head 30.00 Mtrs Discharge:4.70 Cumecs and As per specification With All Lead and Lift As directed by the Engineer incharge of t...
Supplying and fixing HRC Fuses 11/12 KV -3.15 Amps Material Cost etc complete as per specification with all lead and lift and as directed by the engineer incharge of the work.
Supplying and fixing CT PT Ratio: 100-200/5-5A Core-1 : 15VA-CL.1.0 Core-2: 15VA CL 5P10STR:26.3KA/1SEC BIL: 12KV/28/75KVP Material Cost etc complete as per specification with all lead and lift an...
Supplying and fixing of HRC Fuses Type:C-0 KV-11 Amps-150 Material Cost etc complete as per specification with all lead and lift and as directed by the engineer incharge of the work.
Supplying and fixing of Tripping Coil in 6.6 KV HT panel Material Cost etc complete as per specification with all lead and lift and as directed by the engineer incharge of the work.
Supplying and fixing 200A Switch fuses unit with interlock between 2 incomer in 415 V AC Switch yard panel Material Cost etc complete as per specification with all lead and lift and as directed ...
Supplying and fixing L.T.200A/5A core 1: Class 1 10VA .ID-60 Tape wound without mounting clamp in 415 V AC Switch yard panel Material Cost etc complete as per specification with all lead and li...
Supplying and fixing Ammeter-0-200/400A,96X96mm Class Analog Type CTR:250/5A in 415 V AC Switch yard panel Material Cost etc complete as per specification with all lead and lift and as directed ...
Supplying and fixing Voltameter -0-500/400A,96X96mm Class Analog Type in 415 V AC Switch yard panel Material Cost etc complete as per specification with all lead and lift and as directed by the ...
Supplying and fixing Voltmeter selector switch 4 Position-off,RY,BY,BR in 415 V AC Switch yard panel Material Cost etc complete as per specification with all lead and lift and as directed by th...
Supplying and fixing MCCB 63A,3 pole MCCB With o/l And S/C and uv release protections in 415 V AC Switch yard panel Material Cost etc complete as per specification with all lead and lift and as ...
Supplying and fixing MCCB 25A,3 pole MCCB With o/l And S/C and uv release protections in 415 V AC Switch yard panel Material Cost etc complete as per specification with all lead and lift and as ...
Supplying and fixing MCCB 16 A,3 pole MCCB With o/l And S/C and uv release protections in 415 V AC Switch yard panel Material Cost etc complete as per specification with all lead and lift and as...
Supplying and fixing MCCB 16 A,1 pole MCB 6A 230V AC in 415 V AC Switch yard panel Material Cost etc complete as per specification with all lead and lift and as directed by the engineer incharge...
Supplying and fixing Thermostat 25-85 degree C 1NC,Stem Type in 415 V AC Switch yard panel Material Cost etc complete as per specification with all lead and lift and as directed by the engineer ...
Supplying and fixing Spacer Heater 40W,230V AC in 415 V AC Switch yard panel Material Cost etc complete as per specification with all lead and lift and as directed by the engineer incharge of th...
Supplying and fixing Switch socket 6A,230V AC ,50HZ piano Type 3 pin in 415 V AC Switch yard panel Material Cost etc complete as per specification with all lead and lift and as directed by the e...
Supplying and fixing Switch socket panel Light 40W 230V AC incandescent Lamp in 415 V AC Switch yard panel Material Cost etc complete as per specification with all lead and lift and as directed ...
Supplying and fixing of multi function meter 50MA to 6A
Supplying and fixing of Tripping coil
Supplying and fixing of Closeing coil
Supplying and fixing of MCB
Supplying and fixing of Digital Voltameter RY.YB.BR three phase 334V
Supplying and fixing of Digital Amps meter RY.YB.BR three phase 334A
Supplying and fixing of Master trip realy 110V DC/3M+2b/HRC
Supplying and fixing of trip circuit supervision realy 250V
Supplying and fixing of Motor protection relay
Supplying and fixing of voltameter 500 volt
Supplying and fixing of Amps meter 160 Amps
Serviceing of 32 Tonne EOT crain Transpade with all lead and lift and as directed by the engineer incharge of the work.
Supplying Post insulator Clamp Single Lynx ACSR conductor 127/76mm etc complete as per specification with all lead and lift and as directed by the engineer incharge of the work.
Rubber Hand gloves 15kV, SEAMLESS Confirming to ISS (Sample to be verified for seamless before approval) for electrical purpose etc complete as per specification with all lead and lift and as directe...
Supplying of Pad Clamps for Rabbit ACSR as per specification with all lead and lift and as directed by the engineer incharge of the work.
Supplying and fixing of Motor protection relay complete as per specification with all lead and lift and as directed by the engineer incharge of the work.
Supplying and fixing of Master trip relays (lockout relay) complete as per specification with all lead and lift and as directed by the engineer incharge of the work.
Supplying and fixing of Trip circuit supervision relay complete as per specification with all lead and lift and as directed by the engineer incharge of the work.
Supplying and fixing of Feeder protection relay complete as per specification with all lead and lift and as directed by the engineer incharge of the work.
Supplying and fixing of Indication lamps complete as per specification with all lead and lift and as directed by the engineer incharge of the work.
Supplying and fixing of Push buttons complete as per specification with all lead and lift and as directed by the engineer incharge of the work.
Supplying and fixing of Selector switches complete as per specification with all lead and lift and as directed by the engineer incharge of the work.
Supplying and fixing of VCB closing and tripping coilscomplete as per specification with all lead and lift and as directed by the engineer incharge of the work.
Supplying and fixing of Current transformers (motor feeder) complete as per specification with all lead and lift and as directed by the engineer incharge of the work.
supplying and fixing of Current transformers (Incomer feeder) complete as per specification with all lead and lift and as directed by the engineer incharge of the work.
Unloading , removal of coupling, dismantling of pump Cost etc complete as per specification with all lead and lift and as directed by the engineer incharge of the work ( Jyothi pump 4.75 Cumec Disc...
Re-building of pump Cost etc complete as per specification with all lead and lift and as directed by the engineer incharge of the work. (Discharge Jyothi pump 4.75 Cumecs)
Supplying of Ratchet pin Material Cost etc complete as per specification with all lead and lift and as directed by the engineer incharge of the work. (Jyothi pump 4.75 Cumec)
spplying of parallel key for pump shaft Material Cost etc complete as per specification with all lead and lift and as directed by the engineer incharge of the work.(Jyothi pump 4.75 Cumecs)
Supplying of Spilt Ring Material Cost etc complete as per specification with all lead and lift and as directed by the engineer incharge of the work(.Jyothi pump 4.75 Cumec)
Supplying of Gland Sleeve Material Cost etc complete as per specification with all lead and lift and as directed by the engineer incharge of the work((Voltas pumps 5.00 Cumec Discharge And Jyothi...
Supplying of Coper cooling tube Material Cost etc complete as per specification with all lead and lift and as directed by the engineer incharge of the work( Jyothi pump 4.75 Cumecs)
Supplying of oil retaining Tube tube Material Cost etc complete as per specification with all lead and lift and as directed by the engineer incharge of the work (Voltas pumps 5.00 Cumec Discharge...
Supplying of Thorden Bearing Material Cost etc complete as per specification with all lead and lift and as directed by the engineer incharge of the work( Jyothi pump 4.75 Cumecs)
Run out check for shaft Cost etc complete as per specification with all lead and lift and as directed by the engineer incharge of the work( Jyothi pump 4.75 Cumecs)
Supplying and fixing of distance sleeve Material Cost etc complete as per specification with all lead and lift and as directed by the engineer incharge of the work( Jyothi pump 4.75 Cumecs)
Supplying And fixing Gland packing Material Cost etc complete as per specification with all lead and lift and as directed by the engineer incharge of the work (Voltas pumps 5.00 Cumec Discharge And...
Supplying And fixing Stainer Material Cost etc complete as per specification with all lead and lift and as directed by the engineer incharge of the work (Jyothi pump 4.75 Cumec)
Supplying of Grub Screw Material Cost etc complete as per specification with all lead and lift and as directed by the engineer incharge of the work (Voltas pumps 5.00 Cumec Discharge And Jyothi pu...
Supplying and fixing of Bearing Temprecture gauge Meter Material Cost etc complete as per specification with all lead and lift and as directed by the engineer incharge of the work (Voltas pumps 5...
Supplying of sperical Suction bell Bearing material cost etc complete as per specification with all leads and lift and as directed by the engineer in charge of the work ( Jyothi pump 4.75 Cumecs)
Impellers Dynamic Balanceing With All Lead and Lift As directed by the Engineer incharge of the work ( Jyothi pump 4.75 Cumecs)
supplying and fixing of Impler bearing bush With All Lead and Lift As directed by the Engineer incharge of the work ( Jyothi pump 4.75 Cumecs))
Efficiency improvement, Energy conservation and long term corrosion protection in pumping systems by way of Fluiglide coatings including Dry Compressed air @ 6 to 7 kg/cm2 & 350 CFM and By abrasive bl...
Dismantling, Transportation, Assembling and Errection of 2000 NB Butterfly Head 23.00 Mtrs Discharge:5.00 Cumecs With All Lead and Lift As directed by the Engineer incharge of the work
Supplying and fixing inside single door plate for 2000 NB Butterfly Head 23.00 Mtrs Discharge:5.00 Cumecs With All Lead and Lift As directed by the Engineer incharge of the work
Supplying and fixing Drive stub Shaft for 2000 NB Butterfly Head 23.00 Mtrs Discharge:5.00 Cumecs With All Lead and Lift As directed by the Engineer incharge of the work
Supplying and fixing Tail Stub Shaft for 2000 NB Butterfly Head 23.00 Mtrs Discharge:5.00 Cumecs With All Lead and Lift As directed by the Engineer incharge of the work
Supplying and fixing cotter pin for2000 NB Butterfly Head 23.00 Mtrs Discharge:5.00 Cumecs With All Lead and Lift As directed by the Engineer incharge of the work
Supplying and fixing shaft bearing for 2000 NB Butterfly Head 23.00 Mtrs Discharge:5.00 Cumecs With All Lead and Lift As directed by the Engineer incharge of the work
Supplying and fixing Disc seat Ring (EPDM Rubber) for 2000 NB Butterfly Head 23.00 Mtrs Discharge:5.00 Cumecs With All Lead and Lift As directed by the Engineer incharge of the work
Supplying and fixing Shaft seal (EPDM RUBBER) for 2000 NB Butterfly Head 23.00 Mtrs Discharge:5.00 Cumecs With All Lead and Lift As directed by the Engineer incharge of the work
Supply and fixing Bolts and nuts with washers size M72X230mm and Material for butterfly valve 2000 NB Butterfly Head 23.00 Mtrs Discharge:5.00 Cumecs With All Lead and Lift As directed by the Engin...
Supply and fixing Bolts and nuts with washers size M50X230mm and Material for butterfly valve 2000 NB Butterfly Head 23.005 Mtrs Discharge:5.00 Cumecs With All Lead and Lift As directed by the Engi...
Supply and fixing Bolts and nuts with washers size M35 X130mm and Material for butterfly valve 2000 NB Butterfly Head 16,55 Mtrs Discharge:5.00 Cumecs With All Lead and Lift As directed by the Engi...
Supply and fixing Stud Rod and nuts with washers size 45mm Dia 580mm Length Material for butterfly valve 2000 NB Butterfly Head 16,55 Mtrs Discharge:5.00 Cumecs With All Lead and Lift As directed b...
Dismantling, Transportation, Assembling and Errection of 2000 mm Dia NRV valves etc., completge as per specification With All Lead and Lift As directed by the Engineer incharge of the work
Supplying and Errection of Disk plate 2000 mm Dia NRV valves etc., completge as per specification With All Lead and Lift As directed by the Engineer incharge of the work
Supplying and fixing of shaft for 2000 mm Dia NRV valves etc., completge as per specification With All Lead and Lift As directed by the Engineer incharge of the work
Supply and fixing of shaft seal for 2000 mm Dia NRV valves etc., completge as per specification With All Lead and Lift As directed by the Engineer incharge of the work
Supply and fixing of upper shaft and lower Shaft for 2000 mm Dia NRV valves etc., completge as per specification With All Lead and Lift As directed by the Engineer incharge of the work
Supply and fixing of Axial bearing for 2000 mm Dia NRV valves etc., completge as per specification With All Lead and Lift As directed by the Engineer incharge of the work
Supply and fixing of shaft seal for 2000 mm Dia NRV valves etc., completge as per specification With All Lead and Lift As directed by the Engineer incharge of the work
Supply and fixing of Non Return valve Spring of SS Material 2000 mm Dia NRV valves etc., completge as per specification With All Lead and Lift As directed by the Engineer incharge of the work
Supply and fixing of Non Return valve Limit rods along with nuts for below expansion joints of SS Material 2000 mm Dia NRV valves etc., completge as per specification With All Lead and Lift As direc...
Distance piece of Fabricating of Ms pipe 2000 mm Dia with flange and Fasterners gaskit and o ring etc for Manifold raising main below the pump house completge as per specification With All Lead and ...
supplying of Dummy plate 20mm thick MS Plate with making required wholes for fixing 2000 mm Dia pipe for Manifold raising main below the pump house completge as per specification With All Lead and...
Dismantling, of motor connection and motor from motor bed etc. complete as per specification With All Lead and Lift As directed by the Engineer incharge of the work (BHEL motor of 1125 KW)
Stripping the bearings from DE and NDE sides per specification With All Lead and Lift As directed by the Engineer incharge of the work (BHEL motor of 1125 KW)
Supplying of motor D.E bearing NU 244 C3 SKF as per specification With All Lead and Lift As directed by the Engineer incharge of the work (BHEL motor of 1125 KW)
Supplying of motor N.D.E bearing 2X7334 BG SKF as per specification With All Lead and Lift As directed by the Engineer incharge of the work (BHEL motor of 1125 KW)
Replacement of damaged bearings etc., complete as per specification With All Lead and Lift As directed by the Engineer incharge of the work (BHEL motor of 1125 KW)
Refurbusment of rotor, checking continuity of windings and other related parts etc., complete as per specification With All Lead and Lift As directed by the Engineer incharge of the work (BHEL motor ...
Rebuilding of rotor with new sets spare parts etc., complete as per specification With All Lead and Lift As directed by the Engineer incharge of the work (BHEL motor of 1125 KW)
Rebuilding of rotor with motor body etc., complete as per specification With All Lead and Lift As directed by the Engineer incharge of the work (BHEL motor of 1125 KW)
Installation, coupled with pump and commissioning of motor etc., complete per specification With All Lead and Lift As directed by the Engineer incharge of the work (BHEL motor of 1125 KW)
Supplying and fixing for motor Bearing Temprecture gauge Material Cost etc complete as per specification with all lead and lift and as directed by the engineer incharge of the work (BHEL motor of 11...
Supply of LED floodlight luminaire with pressure die cast aluminium housing body for optimal thermal dissipation. Lamp compartment comprising of anti glare clear diffuser with Injection moulded polyca...
Supplying Cable termination Kits Pot heads 1x1000 sq.mm UG cable size as per Technical as per specification with all lead and lift and as directed by the engineer
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
1387 1st HW DTP final call-4.docx
Tender Document • 2.02 MB
RLIS HW Call-4 Notfcn.docx
Instructions to Tenderers • 0.06 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .