Loading
Loading…
Loading…
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹3.9 CrAccepted-AOC | ₹3.9 Cr Quoted ₹39.8 L | L1 | Accepted-AOC AOC |
| 2 | L2₹40.9 L+₹1.1 L (2.83%)Rejected-Finance | ₹40.9 L+₹1.1 L (2.83%) | L2 | Rejected-Finance NOT L1 |
| 3 | L3₹41.5 L+₹1.7 L (4.15%)Rejected-Finance | ₹41.5 L+₹1.7 L (4.15%) | L3 | Rejected-Finance NOT L1 |
| Sl No | Description | Qty | Unit | Sai Ram Builders L1 | sri sai construction L2 | VACON INFRASTRUCTURES L3 |
|---|---|---|---|---|---|---|
| 1.00 | M&L for Non-skid coloured ceramic tiles 7 to 8 mm thick (square/rectangular) area of each tile exceeding 0.06 sqm but not exceeding 0.11 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match over a screed of 15mm thick in CM 1:6 after dimantiling of old existing floor tiles incl. removal of dabris outside of MOD land etc complete all as specified and directed. | 130 | Sqm | 900 ₹1,17,000 Lowest | 1,060 ₹1,37,800 | 1,100 ₹1,43,000 |
| 2.00 | M&L Non skid coloured ceramic tiles 7 to 8 mm thick (square/rectangular) of size up to 0.04 Sqm cut from same shade and size of floor tiles of area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm, in skirting etc. set and jointed in neat cement slurry and pointed in white cement or coloured cement to match over 10 mm thick rendering in cement mortar 1:4 after dismantling of existing tiles including removal of debris outside of MOD land etc complete all as specified and directed.
Note : The width of tiles 100 mm to be cut from full size of tiles as directed by Engineer-in-charge. | 20 | Sqm | 1,000 ₹20,000 Lowest | 1,070 ₹21,400 | 1,100 ₹22,000 |
| 3.00 | S&F Coloured glazed ceramic tile in vertical surface 450x300x7 mm thick set and jointed in neat cement slurry and pointed in white or colour cement to match over and including 10 mm thick rendering CM 1:4 backing coat after dismantling of wall tiles/Terrrazzo/Stone Slabs/ or any type of materials in dado including cement mortar bedding and removing upto Brick wall surface and removal of rubbish out side the MD land complete all as specified and as directed. | 200 | Sqm | 1,000 ₹2,00,000 Lowest | 1,200 ₹2,40,000 | 1,200 ₹2,40,000 |
| 4.00 | M&L Non-skid coloured ceramic tiles 7 to 8 mm thick (square/rectangular) area of each tile exceeding 0.18 sqm but not exceeding 0.38 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match over a screed of 15mm thick in CM 1:6 etc after dismantling of old existing floor tiles of size upto 0.36 Sqm cut from same shade of complete all as specified and as directed.complete all as specified and as directed.. | 105 | Sqm | 1,050 ₹1,10,250 Lowest | 1,125 ₹1,18,125 | 1,500 ₹1,57,500 |
| 5.00 | M&L Non skid coloured ceramic tiles 7 to 8 mm thick (square/rectangular) area of each tile exceeding 0.18 sqm but not exceeding 0.38 sqm, in skirting etc. set and jointed in neat cement slurry and pointed in white cement or coloured cement to match over 10 mm thick rendering in cement mortar 1:4 etc after dismantling of old existing floor tiles complete all as specified and as directed..
Note : The width of tiles 100 mm to be cut from full size of tiles as directed by Engineer-in-charge. | 15 | Sqm | 1,080 ₹16,200 Lowest | 1,140 ₹17,100 | 1,200 ₹18,000 |
| 6.00 | S&F Ultra charged Vitrified Coloured Ceramic tiles (light shade) 8-9mm thick (square/ rectangular) polished, area of each tiles not exceeding 0.36 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match over a screed of 15mm thick in CM 1:6 etc after dismantling of old existing floor tiles of size upto 0.36 Sqm cut from same shade of complete all as specified and as directed.. | 300 | Sqm | 1,100 ₹3,30,000 Lowest | 1,200 ₹3,60,000 | 1,500 ₹4,50,000 |
| 7.00 | S&F ultra charged for Vitrified coloured ceramic tiles (light shade) 8-9mm thick (square/rectangular) area of each tile upto 0.06 Sqm cut from same shade and size of the tile for floor, in skirting etc. set and jointed in neat cement slurry and pointed in white cement or coloured cement to match over 10 mm thick rendering in cement mortar 1:4. etc after dismantling of old existing floor tiles complete all as specified and as directed.. | 30 | Sqm | 1,100 ₹33,000 | 1,220 ₹36,600 | 1,000 ₹30,000 Lowest |
| 8.00 | M&L 18-20 mm thick Granite black colour including rounding edges to exposed portion as in platforms for wash hand basin / sink (table, rubbed and polished) in steps, jambs, pillars, window cills, cooking platforms and like laid in cement mortar (1:4) incl pointing in white cement (1:2) using mable dust with admixture of pigments to match with shade granite including cutting for securing of slab,including after dismantling of existing any type of stone or concrete etc complete all as specified and as directed. | 35 | Sqm | 3,200 ₹1,12,000 Lowest | 3,800 ₹1,33,000 | 4,500 ₹1,57,500 |
| 9.00 | M&L for rendering 15 mm thick in CM 1:4 on fair face of brick or concrete surfaces of walls finished even and smooth including taking down, raking out joints, hacking for key, scrubbing down with water etc and applying two coats of cement based paint over a coat primer to match with the existing surface removing rubbish of the premises and disposed off outside the MD land complete all as specified and as directed. | 150 | Sqm | 250 ₹37,500 Lowest | 300 ₹45,000 | 300 ₹45,000 |
| 10.00 | M&L for rendering 15 mm thick in CM 1:4 on fair face of brick or concrete surfaces of walls finished even and fair Including taking down, raking out joints, hacking for key, scrubbing down with water etc complete all as specified and as directed. | 200 | Sqm | 260 ₹52,000 | 250 ₹50,000 | 220 ₹44,000 Lowest |
Tender Value
₹45 L
EMD Value
₹90,000
Closing Date
9 Aug 2025, 6:00 pmClosed
GE(S)BANGALORE
GE(S)BANGALORE
REPAIR TO LEAKAGE / SEEPAGE, SANITARY FITTINGS, FLOORING AND AT VARIOUS BLDGS OF DAD RESIDENTIAL AREA UNDER AGE B/R (SOUTH) OF GE (SOUTH) BANGALORE
2025_MES_719976_1
8947/E8
Open Tender
Civil Works
Item Rate
270 days
BANGALORE
AS PER NIT
6 documents required · 6 mandatory
₹500
GE(S)BANGALORE
₹90,000
Yes
25 Sept 2025
11 Jul 2025
11 Aug 2025
11 Jul 2025
9 Aug 2025
26 Jul 2025
Amount
M&L for Non-skid coloured ceramic tiles 7 to 8 mm thick (square/rectangular) area of each tile exceeding 0.06 sqm but not exceeding 0.11 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match over a screed of 15mm thick in CM 1:6 after dimantiling of old existing floor tiles incl. removal of dabris outside of MOD land etc complete all as specified and directed.
M&L Non skid coloured ceramic tiles 7 to 8 mm thick (square/rectangular) of size up to 0.04 Sqm cut from same shade and size of floor tiles of area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm, in skirting etc. set and jointed in neat cement slurry and pointed in white cement or coloured cement to match over 10 mm thick rendering in cement mortar 1:4 after dismantling of existing tiles including removal of debris outside of MOD land etc complete all as specified and directed. Note : The width of tiles 100 mm to be cut from full size of tiles as directed by Engineer-in-charge.
S&F Coloured glazed ceramic tile in vertical surface 450x300x7 mm thick set and jointed in neat cement slurry and pointed in white or colour cement to match over and including 10 mm thick rendering CM 1:4 backing coat after dismantling of wall tiles/Terrrazzo/Stone Slabs/ or any type of materials in dado including cement mortar bedding and removing upto Brick wall surface and removal of rubbish out side the MD land complete all as specified and as directed.
M&L Non-skid coloured ceramic tiles 7 to 8 mm thick (square/rectangular) area of each tile exceeding 0.18 sqm but not exceeding 0.38 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match over a screed of 15mm thick in CM 1:6 etc after dismantling of old existing floor tiles of size upto 0.36 Sqm cut from same shade of complete all as specified and as directed.complete all as specified and as directed..
M&L Non skid coloured ceramic tiles 7 to 8 mm thick (square/rectangular) area of each tile exceeding 0.18 sqm but not exceeding 0.38 sqm, in skirting etc. set and jointed in neat cement slurry and pointed in white cement or coloured cement to match over 10 mm thick rendering in cement mortar 1:4 etc after dismantling of old existing floor tiles complete all as specified and as directed.. Note : The width of tiles 100 mm to be cut from full size of tiles as directed by Engineer-in-charge.
S&F Ultra charged Vitrified Coloured Ceramic tiles (light shade) 8-9mm thick (square/ rectangular) polished, area of each tiles not exceeding 0.36 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match over a screed of 15mm thick in CM 1:6 etc after dismantling of old existing floor tiles of size upto 0.36 Sqm cut from same shade of complete all as specified and as directed..
S&F ultra charged for Vitrified coloured ceramic tiles (light shade) 8-9mm thick (square/rectangular) area of each tile upto 0.06 Sqm cut from same shade and size of the tile for floor, in skirting etc. set and jointed in neat cement slurry and pointed in white cement or coloured cement to match over 10 mm thick rendering in cement mortar 1:4. etc after dismantling of old existing floor tiles complete all as specified and as directed..
M&L 18-20 mm thick Granite black colour including rounding edges to exposed portion as in platforms for wash hand basin / sink (table, rubbed and polished) in steps, jambs, pillars, window cills, cooking platforms and like laid in cement mortar (1:4) incl pointing in white cement (1:2) using mable dust with admixture of pigments to match with shade granite including cutting for securing of slab,including after dismantling of existing any type of stone or concrete etc complete all as specified and as directed.
M&L for rendering 15 mm thick in CM 1:4 on fair face of brick or concrete surfaces of walls finished even and smooth including taking down, raking out joints, hacking for key, scrubbing down with water etc and applying two coats of cement based paint over a coat primer to match with the existing surface removing rubbish of the premises and disposed off outside the MD land complete all as specified and as directed.
M&L for rendering 15 mm thick in CM 1:4 on fair face of brick or concrete surfaces of walls finished even and fair Including taking down, raking out joints, hacking for key, scrubbing down with water etc complete all as specified and as directed.
M&L for applying two coats of 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10 sqm to match with the existing surface and removing rubbish and disosed outside the MD land incl all necessary safety norms to the workers all as specified and directed. removing rubbish of the premises and complete all as specified and as directed.
M&L for rendering 10mm thick in CM 1:6 on fair face of brick or concrete surfaces of walls finished even and fair Including taking down, raking out joints, hacking for key, scrubbing down with water etc and removing rubbish of the premises and applying two coats of oil emulsion distemper over a coat of 1mm thick wall care puttyafter preparation of surface complete all as specified and as directed.
M&L for rendering 5mm thick in CM 1:3 on ceiling of concrete surfaces finished even and fair including taking down plaster, raking out joints, hacking for key, scrubbing down with water etc and applying three coats of white wash on ceilings and removing rubbish of the premises and disposed off outside the MD land complete all as specified and as directed.
M&L for rendering 5mm thick in CM 1:3 on ceiling of concrete surfaces finished even and fair including taking down plaster, raking out joints, hacking for key, scrubbing down with water etc and applying two coat of oil emulsion distemper over a coat of primer wash on ceilings and removing rubbish of the premises and disposed off outside the MD land complete all as specified and as directed.
M &L providing cement concrete 1:2:4 type B-0 (using 12.5 mm graded crushed stone aggregate) in roof/Chajjas kerb or mud stops, rounded or chamfered as pading concerete.
M&L for 10 mm thick screed bed or bedding layer in cement mortar 1:4 on floor/roof /Chajjas surfaces mixed with liquid WPC @ 200 ml per bag of cement finished the surfaces even and fair all as specified and as directed.(Cost of WPC will be included in the rate and will not be measured Separately)
M&L for cleaning the plastered/concrete surfaces of roof with wire brushes and applying water proofing treatment as under: (a) Apply bitumen primer at the rate of 0.27 litre per Sqm as per IS 3384-1986 and bonding bitumen of VG-10 @1.20 Kg per Sqm. (b) M&L 3 mm thick APP modified water proofing memebrane as per IS 16540/16532-2017 weighing not less than 3.80 kg per Sqm reinforce polyster/HMHDPE matt black finish laid with 100 mm overlap in lognitudinal and transfer direction over compatible primer/bonding bitumen and finish the top surface with bituminus aluminium paint @0.10 Ltr per Sqm including dismantling of old water proofing treatment and roof tiling including screed bed or any type of treatment and cleaning the surface with wire brushes removing dust, foreign material and rubbish off the same out side the MD land complete all as specified.
Removal of vegetation/tree growth etc on external surface of walls or on roof top in two/four storey building by taking all necessary precaution to the workers and also the adjacent govt properties including digging out of filling holes with PCC 1:2:4 type B1 using (20 mm graded stone aggregate) and finishing the surface to match adjacent surfaces after application of suitable chemical using " break" manufactured by M/S denocil company or equivalent to avoid re growth of the vegetation and removing the debris to outside the MD land complete all as specified and directed(Any damage to the adjacent govt properties like glass windows , pipes lines etc to be made good without any extra cost for plants girth not exc 5 cm
All as above item No 18 for plants girth exc 5 cm and n.exc 15 cm
M&L for Demolition of un reinforced cement Concrete of any description and in any position not otherwise specifically provided for sunken slabs
M&L for PCC 1:5:10 E2(40 mm graded stone aggregates) for sunken slabs
M & L for rendering 15mm thick on fair faces of brick work or concrete surfaces in cement mortar 1:4 finished even and smooth surfaces (without using extra cement) inclueding complete all as specified and as directed.
Demolishing reinforced cemet concrete Roofs, floors (other than ground floors), beams, staircases, landing, chajjas and similar suspended work including cutting of reinforcement
S&F pre-painted galvalume aluminium zinc coating GI based corrugated steel sheet 0.50 mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws as specified.
S&F rectangular/Square hollow mild steel section as in purlins, crane gantries, rails and fastenings and heavy bracket framing (Beam, tee, angle, channel or flat sections) including distance pieces, cleats etc
Cutting chases, pinning in, stone concrete block or slabs wall making good to facings where required and pointing in cement mortar 1:3 to ends or edges of landings, steps, cills, sunshades, shelves, lintels, etc.; and cutting chases for concealed water tubing or concealed conduit wiring, etc., and making good, cutting not exc 10cm girth and removal of debris otside of MOD land complete all as specified.
S & F in repair of CPVC pipes 25mm Incl. SDR 11 Plain CPVC SDR 11 fittings on walls/ceiling or laying in floors including taking down of pipe of 20 mm GI pipe complete all as specified.
S & F in repair of CPVC pipes 20mm all SDR 11 Plain CPVC SDR 11 fittings on walls/ceiling or laying in floors including taking down of pipe of 15 mm GI pipe complete all as specified.
S&F of 20 in repair mm dia CPVC brass elbow complete all as specified and as directed.
S&F of 20 in repair mm dia CPVC Brass Tee complete all as specified and as directed.
S&F of 20 in repair mm dia female/male brass threaded adapter complete all as specified and as directed.
S&F of 15 mm in repair CP extension nipple complete all as specified and as directed.
Cleaning of air lock in GI/CPVC/UPVC pipe 15/20/25 mm and making the water supply available upto water taps including taking down and refixing of pipes attending the complaints of no water supply & rectifying defects in water supply lines complete all as specified.
S & F in repair PVC (SWR) pipes 110mm dia single socketed in any length with rubber ring joints fixed to walls fixed with PVC straps or clips including dismantling and breaking of pipe and fittings complete all as specified and as directed.
S&F in repair PVC (SWR) pipes 75 mm size in bore single socketed , in any length with rubber ring joints, fixed to walls fixed with PVC straps or clips including dismantling and breaking of pipe and fittings complete all as specified and as directed.
S&F in repair PVC (SWR) 110 mm bore pipes single socketed, in any length with rubber ring joints laid in floors including dismantling and breaking of pipe and fittings complete all as specified and as directed.
S&F in repair PVC (SWR) 75 mm bore pipes single socketed, in any length with rubber ring joints laid in floors including dismantling and breaking of pipe and fittings complete all as specified and as directed.
S&F in repair PVC bends any radius 75mm dia complete all as specified and directed.
S&F in repair PVC bends any radius 75 mm dia with access door complete all as specified and directed.
S& F in repair PVC bends any radius 110mm dia complete all as specified and directed.
S&F in repair PVC bends any radius 110 mm dia with access door complete all as specified and directed.
S&F in repair PVC Single T any radius 110 mm dia complete all as specified and directed.
S&F in repair PVC Single T any radius 110 mm dia with access door complete all as specified and directed.
S&F in repair PVC (SWR) 75 mm branch piece,double (double Y) equal or unequal complete all as specified and directed.
S&F in repair PVC (SWR) 110 mm branch piece,double (double Y ) equal or unequal complete all as specified and directed.
Cutting holes into or through brick walls built , in cement mortar or cement lime mortar and stone walls built in lime mortar or walls of lime concrete of superficial area n. exc 150 Sqcm complete all as specified and as dircted.
S&F Powder coated aluminium (minimum thickness of powder coating 50 micron) work for windows, ventilators with extruded built up standard 2/3 track sliding section of approved make conforming to IS: 733 and IS:1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing/ paneling, C.P. brass/ stainless steel screws, all complete as per architectural drawings and the directions of Engineer-in-Charge. complete all as specified.
S&F Powder coated aluminium (minimum thickness of powder coating 50 micron) work for ventilators with extruded built up standard rectangular/square section including PVC strips for holding of lovers of approved make conforming to IS: 733 and IS:1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing/ paneling, C.P. brass/ stainless steel screws, all complete as per architectural drawings and the directions of Engineer-in-Charge. complete all as specified.
S&F powder coated Anodised aluminium sliding window shutter type without sash bars, aluminium sections weighing 0.55 kg/m including powder coating of any colour ,thickness not lessthan 50 microns necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws, necessary locking arrangement and roller complete all as specified
Taking down chowkats or frames with shutters (without taking off shutters from the frame) not exc 1.5 sqm etc complete all as specified and directed.
Taking down chowkats or frames with shutters (without taking off shutters from the frame) exc 1.5 sqm but n exc 4 Sqm etc complete all as specified and directed.
Taking down of shutter exc 1.0 sqm but n.exc 2.0 Sqm each
S&F Factory made single extruded WPC (Wood Polymer Composite) solid door/ window/ Ceosetory windows & other Frames/ Chowkhat of size 45 x 70 mm comprising of virgin PVC polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/ wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) fabricated with miter joints after applying PVC solvent cement and screwed with full body threaded star headed SS screws having minimum frame density of 750 kg/ cum, screw withdrawal strength of 2200 N (Face) & 1100 N (Edge), minimum compressive strength of 58 N/mm2, modules of elasticity 900 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/ moisture proof and fire retardant and fixed in position with MS hold fast/ lugs/SS dash fasteners of required dia and length incl all necessary fittings complete as per direction of Engineer-in-Charge. complete all as specifed.
S&F Factory Made Solid PVC Moulded Door Shutter,with particle board 28 to 30mm thick (stiles), with 2, 4, or 6 raised panel design with 2mm thick Moulded PVC Sheet on the front face & 2mm plain colour PVC sheet on back face, supplying & fixing in frame at site as per specification & drawin
S&F 30 mm thick flush shutters, solid core construction, with particle board core and plywood face panels, commercial type on both sides.complete all as specified
S&F 35 mm thick IInd class hard wood glazed and skelton shutters open rebated and prepared to receive glass , gauge etc, with plain, chamfered or ounded, mitred and rebated sash bars, any number sto squares with plain, chamfered or rounded mittered and rebated sash bars any numbers, edges of framing plain chamfered
S&F Framed work such as grills, gratings, etc.. with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work con- forming to Fe.290.Gde-E-165 complete all as specified and as directed
Repairs to existing steel window / Ventilator hinges by means of replacing the old hinge with box type and welded to steel shutter and frame , easing the shutter,and making good the suface finsh to match extg wall surface complete all as specified and directed(G+5 Storey bldgs)
S&F for Framed work as in doors or gates of angle or other section with gusset plates, rails, braces, etc., complete, drilled for fixing of steel sheeting or other covering. Doors, etc. to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings (exclusive of steel sheeting or other covering, running rails and guides) and hanging; also fastening and fixing complete FE-410-W Gde-E-250 Quality A
M&L for preparation of new or previously untreated wood and wood based surfaces of any description, not otherwise described, over 10 cm width or girth and applying two coats of synthetic enamel paint over a coat of pink primer complete all as specified and as directed.
M&L for preparation of new or previously untreated steel surfaces of any description, not otherwise described, over 10 cm width or girth and applying two coats of synthetic enamel paint over a coat of red oxide, zincchrome primer complete all as specified and as directed.
S&F stainless steel 100 mm butt hinges for doors complete all as specified.
S&F 150 mm size extruded aluminium alloy handles for doors fabricated type anodized complete all as specified.
S&F 150 mm long aluminium anodized barrel tower bolts for PVC doors and windows of extruded section complete all as specified.
S&F 200 mm long aluminium anodized barrel tower bolts for doorsof extruded section complete all as specified.
S&F 250 mm long aluminium alloy anodised sliding door bolt with hasp staple (bolt type) and fixing clips of sheets cast or extruded sections or cast aluminium alloy complete all as specified.
S&F for floor door stopper(double) of aluminium alloy body and tongue anodised with hard drawn steel spring fixed to door overall length of cover plate 150mm complete all as specified
S&F mild steel 150 mm helical door springs including roller and roller plate complete (Helical door spring) including welding to steel chowkhats if required all as specified.
S&F Stainless steel wire cloth. 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples complete all as specified.
S&F 4mm thick figured glass pin headed type and glazing with oil putty in square n.exc 0.50 Sqm in each pane complete all as specified.
S&F sheet glass ordinary quality 4mm thick in square not exc 0.50 Sqm each pane glazing with oil putty, clip in metal frameand wooden beading in wooden frame complete all as specified.
S&F in repairs 150 mm size extruded aluminium alloy handles fabricated type anodized complete all as specified.
S&F in repairs 150 mm long aluminium anodized barrel tower bolts for PVC doors of extruded section complete all as specified.
S&F in repairs 200 mm long aluminium anodized barrel tower bolts of extruded section complete all as specified.
S&F in repairs 250 mm long aluminium alloy anodised sliding door bolt with hasp staple (bolt type) and fixing clips of sheets cast or extruded sections or cast aluminium alloy complete all as specified.
S&F in repairs mild steel 150 mm helical door springs including roller and roller plate complete (Helical door spring) including welding to steel chowkhats if required all as specified.
S&F in repair floor door stopper(double) of aluminium alloy body and tongue anodised with hard drawn steel spring fixed to door overall length of cover plate 150mm complete all as specified
S&F in repair Stainless steel wire cloth. 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples/screws with bolt and nut complete all as specified.
S&F in repairs sheet glass ordinary quality 4mm thick in square not exc 0.50 Sqm each pane glazing with oil putty, clip in metal frameand wooden beading in wooden frame including hacking out of old broken glass complete all as specified.
S&F 4 mm in repairs thick figured glass pin headed type and glazing with oil putty in square n.exc 0.50 Sqm in each pane including hacking out old broken glass (any thickness, size, quality or description) from metal frame including punching or drilling out old glazing pins/spring clips and providing and fixing new ones complete all as specified and as directed.
Resecuring or Easing and adjusting without taking down of shuttern. exc 1 Sqm n exc 2 Sqm complete all as specified and as directed
S&F in repairs 2nd class hard wood plain fillets, Square or rectangular or triangular in section, clean sawn, planed on both sides secured with nails or beads , sectional area exc 3 Sqcm and not exc 6 Sqcm including two coats of synthetic enamel paint over a coat of pink wood primer complete all as specified.
S&F in repair 25mm dia stainless steel curtain rod including 2 Pair of fancy type brackets/corners ,fixed with 45cm long mild steel screws complete all as specified
S&F in repairs vitreous china wash down water closet pan (pedestal pattern), white (excluding fixing bolts, flushing cistern and flush pipe) 'P' or 'S' trap including dismantling of old Water closet complete all as specifed and as directed.
S&F in reapair vitreous China squatting pan, ‘Orissa’ pattern, size 580 x 440 mm white, with integral foot rests (excluding flushing cistern and flush pipe) including connection to trap, and to flushing pipe, anti-syphonage pipe .complete including making good to floor witcomplete all as specified
S&F in repairs plastic water closet seat cover, White, closed pattern with flat bottom, and cover and mild steel chromium plated or aluminised hinging device complete all as specifed and as directed.
S&F in repair PVC white low level flushing cistern 10 ltr capacity with all fittings syphonic action with inlet ball valve and float including flush pipe, handle, bracket PVC short/long bendetc. complete all as specified and directed
S&F in repair PVC flush pipe 32 mm bore high density for low level flushing cistern including all joints, washers suitable for Indian type/ Pedstal type WC complete all as specified.
Petty repairs to leaking low level or high level flushing cistern by adjusting the float valves, internal fittings and including removal and replacement of rubber washer in PVC siphons, leaking PVC bends/GI pipes etc. complete all specified and directed by Engineer in charge
S&F in repairs PVC internal fittings (ie syphon) for low/high level flushing cistern complete all as specified.
S&F in repairs PVC connection 15 mm size , 60 cm long with PTMT adopter,check nuts and washer on both sides for cold water complete all as specified.
S&F in repair vitreous china wash hand basin, white, flat back size 550 x 400 mm including one number brass CP waste coupling, waste pipe 32 mm dia, brackets 2 numbers including cutting for and pinning in ends of brackets complete all as specified and directed.
S&F in repair 32 mm dia PVC collapsible waste pipe for WHB/Kitchen sink complete all as specified.
S&Fin repairs sinks made of stainless steel 1 mm thick kitchen or laboratory with plugs, washers and waste coupling; including bedding in cement mortar on to dwarf wall or includingfixing cantilever brackets and connecting union to pipe, overall size 450mm*600mm complete all as specified and as directed
M&L in repairs 32mm dia Waste coupling, brass, chromium plated for SS Kitchen sinks, WHB etc. with long screwed shanks and fly-nuts, flange end bedded in red lead cement and other end fixed complete all as specified.
S&F in repairs Bib tap cast copper alloy 15mm fancy type , Chromium plated screwed down, high pressure, with capstan head , screwed down screwed for iron pipe.
S&F in repair, bib taps, brass, fancy type, long body, chromium plated for 15 mm bore pipe or for brass ferrule or to GI socket complete all as specified and directed.
S&F in repair 15 mm bore diameter brass CP wall mixer any type complete all as specified and as directed.
S&F in repair pillar taps, brass, with capston heads, fancy type, chromium plated, screwed down high pressure with or without lettered 'Hot' or 'cold' with long screwed shanks and flynuts screwed for 15mm bore iron pipe and fixed in repair, complete all as specified and directed.
S&F in repairs stop valves 15 mm nominal bore, brass, fancy type, chromium plated with long shank and cup (concealed type), screwed down, high pressure with crutch or butterfllly handles, screwed both ends for iron pipe or for brass ferrule or to GI socket complete, fixed in repairs, all as specified and directed .
S&F in repairs angle valves 15 mm nominal bore, brass, chromium plated, complete, fixed in repairs, all as specified and directed .
S&F in repair brass spindle for pillar taps, stop valves, bib taps, angle valves, concealed stop cocks & wall mixer cock for 15mm by changing jumper valves, washers etc complete all as specified
S&F in repairs over head shower chromium plated 95 mm dia with 3 flow with SS over head shower arm of 180mm with flange complete all as specified and directed.
S&F,in repairs 15mm size health faucet, ABS body , with wall hook and 1 metre stainless steel braided rubber hose pipe complete all as specified and as directed.
S&F in repairs brass chromium plated grating 125 mm dia circular with centre hole/ without hole of approved make and fixing with cement mortar 1:3 on Nahani trap or floor trap complete all as specified.
S&F in repairs 100mm dia PVC (SWR) floor/Nahani trap, plain with grating including solvent cement with dismatnling of old nahani trap with necessary PCC/ cement work complete all as specified and as directed.
S&F in repairs 75mm dia PVC (SWR) multi floor trap with grating including jointing with solvent cement with dismatnling of old nahani trap with necessary PCC/ cement work complete all as specified and as directed.
S & F in repairs looking mirror of 5 mm thick 500mmx700mm with double coat for protection and longevity grounded edges for safety and silver plating on the back for better refelection and fixed to wooden plugs with chromium plated brass screws and cup washers complete all as specified & directed.
S&F in repairs Glass corner shelf including CP railing, radius 300 mm complete all as specified and directed by the Engr-in-Charge, fixed in repairs.
S&F in repair tubular towel rail 600 mm long of brass chromium plated 20 mm dia D type 60 cm long fixed with two plugs (gutties) of 2nd class hard wood embedded in cement mortar 1:3 with MS screws complete all as specified.
S&F 1000 Ltrs. Capacity rotational moulded polyethylene water storage tanks (cylinder vertical with class top) hoisted and fixed in position including dismatling and removing to store all as specified
S&F 500 Ltrs. Capacity rotational moulded polyethylene water storage tanks (cylinder vertical with class top) hoisted and fixed in position including dismatling and removing to store all as specified
S&F in repairs CPVC ball valve 20 mm internal dia complete all as specified and as directed
S&F in repairs CPVC tank union 20mm internal dia complete all as specified and as directed
S&F Tank adapter 20 mm internal dia complete all as specified and as directed
S&F 20 mm internal bore Ball valve high pressure of PTMT with epoxy coated Aluminium rod & high density PVC Plastic ball screwed for iron pipe and fixed. (Minimum weight 20mm-210gms) complete, fixed in repairs, all as specified.
S&F 20 mm internal bore tank nipple suitable for HDPE water tank. (Min wt 45 gms).
S&F in repairs HDPE PVC lid (cover) for 500 ltrs/1000 ltrs capacity PVC tank complete all as specified.
Materials and labour for cleaning of water tanks of capacity exceeding 250 litres and not exceeding 500 litres including cleaning of bottom and internal surfaces by brushing with nylon brush, removing all deposits/ scales, silt /other sticky or foreign materials from adhering surfaces and washing inside surfaces of water tanks with approved quality of bleaching powder solution and finally re cleaning with fresh plain water thoroughly to remove all the trace of bleaching powder and draining out the collected water including writing date of cleaning on water tanks with enamel paint complete all as directed.
Materials and labour for cleaning of water tanks of capacity exceeding 500 litres and not exceeding 1000 litres including cleaning of bottom and internal surfaces by brushing with nylon brush, removing all deposits/ scales, silt /other sticky or foreign materials from adhering surfaces and washing inside surfaces of water tanks with approved quality of bleaching powder solution and finally re cleaning with fresh plain water thoroughly to remove all the trace of bleaching powder and draining out the collected water including writing date of cleaning on water tanks with enamel paint complete all as directed.
sri sai construction (BID ID -3388413)
VACON INFRASTRUCTURES (BID ID -3388158)
stage.html
html • 0.05 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .