Repair to hard standing, footpath, chequered tiles, paver block, kerb stone and other certain B/R works at AFS Amla

Amount

Demolition of cement concrete as in ground floor and paving not exc 15 cm thickness below or above GL ( unreinforced concrete )

M&L PCC 1 :4:8 type D1 (using 40mm graded stone aggregate) as in sub base 75mm thick, complete all as directed.

M&L for 100 mm thick PCC 1 :2:4 Type B-1 (20mm graded aggregate ) ' as in top layer , finished fair and even complete all as directed.

Forming 12mm thick expension joint filled with preformed bituminous filler board and top 30mm primed and sealed with sealing compound grade 'A' for thickness of concrete slab 100 mm thick .

Dismantling Stone slabs and tiles of any description or thickness in floors, aprons etc.laid dry and pointed complete all as specified and directed.

M&L for coloured glossy finish heavy duty endura flooring tiles of size 30cm x 30cm x 10mm set with grey cement and no pigment, jointed and pointed in neat cement slurry in floors over and including 15mm thick screed bed in CM 1 :6 Complete all as specified and directed.

M & L 60mm thick factory made chamfered edge cement Concrete paver block of M-35 grade with approved colour, design & pattern as in footpath, parks, lawns, drive ways or light traffic parking etc., of required strength, thickness & size/ shape, made by table vibratory method using PU mould, laid in required colour & pattern over and including 50mm thick compacted bed of fine sand, compacting and proper embedding/ laying of inter locking paver blocks into the sand bedding layer through vibratory compaction by using plate vibrator, filling the joints with sand and cutting of paver blocks as per required size and pattern, finishing and sweeping extra sand; complete all as specified and directed.

Laying only 60mm thick factory made chamfered edge cement Concrete paver block of M-35 grade with approved colour, design & pattern as in footpath, parks, lawns, drive ways or light traffic parking etc., of required strength, thickness & size/ shape, made by table vibratory method using PU mould, laid in required colour & pattern over and including 50mm thick compacted bed of fine sand, compacting and proper embedding/ laying of inter locking paver blocks into the sand bedding layer through vibratory compaction by using plate vibrator, filling the joints with sand and cutting of paver blocks as per required size and pattern, finishing and sweeping extra sand; complete all as specified and directed.

M&L for glossy finished Chequered cement concrete tiles 30cm x 30cm x 25mm thick, set, jointed and pointed in neat cement slurry with grey pigment cement and pigment in floors over and including 15mm thick. screed bed in CM 1 :6 complete all as specified and directed.

M & L at or near ground level factory made kerb stone of M 25 grade cement concrete in position to the required line, level and curvature, jointed with cement mortar 1 :3 (1 cement: 3 coarse sand), including making joints with or without grooves (thickness of joints except at sharp curve shall not to more than 5 mm}, including making drainage opening wherever required complete.

M&L for two coats of synthetic enamel paint on surfaces of any description (BRICK, STONE, CONCRETE, ASBESTOS CEMENT OR PLASTER SURFACES) over 10cm girth or width, not otherwise described including preparation of new or previously untreated surface complete all as specified and directed.

Demolition of brick work or stone masonry built in cement mortar including all quoins, arches, pillars etc and removing debris outside MD land complete all as directed.

M&L Fly ash brick 75 kg/cmsq compressive strength. Modular size , is straight or curved on plan exc. 6 meter mean radius built in cement mortar 1 :6 complete all as specified.

Taking down cement plaster on brick or stone walls etc, including racking out joints, hacking for key, scrubbing down with water etc.

M & L (10+5)mm thick for rendering fair faces of brick work or Concrete surface in two coats 10mm thick in CM(1 :6) as under coat 5mm thick CM (1 :4) as finishing coat in two separate layer finished even and smooth without using extra cement complete all as specified and as directed.

M&L two coat of cement base paint over one coat of alkali resistant primer paint including preparation of new wall surfaces complete.

Note:- The amount against the Schedule of Credit mentioned in the tender document shall be deducted from the total amount quoted against Sch 'A' while deriving the Contract Sum for Acceptance.

Raj Construction