Renovation with peripheral development of Kedar Gouri waterbody in Ward No. 59

Earthwork excavation in foundation in all kinds of soil by mechanical means by excavator including rough dressing & levelling the bed & depositing the excavated materials 5 km away from site with all labour machinary, T&P tc. complete as per the direction of the EIC.

Earth work in slushy soil in water upto 0.60 mtr depth requiring the aid of pan & vessel within 50 mtr initial lead & 1.50 mtr initial lift.

Engage of 5hp diesel pump set with supplying all materials,labour & T&P etc. complete as directed by the EIC.

Bio mining by mannual labour from excavated or desilted soil from surfaces & upto 0.3 m depth.

Conveyance of excavated soil/silt from stack in dry condition including loading & unloading the earth from the transport vehicle& transport carriage upto 1st 5 km including cost of loading & unloading

Filling plinth with sand in layers not exceeding 20 cm in depth, well watered and compacted, top surface dressed and levelled to proper gradient including cost and conveyance of sand, all taxes and royalties, loading and unloading, all labour sundries T&P etc. complete as per direction of Engineer-in-Charge.

Providing and laying 80 mm thick factory made cement concrete interlocking paver block of M -40 grade made by block making machine with strong vibratory compaction, of approved size, design & shape, laid in required colour and pattern over and including 50mm thick compacted bed of coarse sand, filling the joints with line sand etc. all complete as per the direction of Engineer-in-charge.

Fabrication & manufacturing of solid precast concrete element with provisions of shear keys, connecting loops, dowel tubes and proper lifting accessoriesfor walls, beams, slabs, stairs, column etc, of various thickness, shape and size of different concrete grades manufactured in controlled factory environment with approved methodology including moulds (Pallet system, Tilts form, table moulds, battery moulds, vertical moulds, beam moulds, column moulds, staircase moulds, Facade mould, etc.), mixing, transporting and placing of concrete, vibrating, curing, finishing, making necessary cutott/holes of required sizes for services. yard handling & stacking all complete as per IS 11447:1985 and as per approved shop drawings and design mix as per the direction of Engineer-in-Charge (Cost of Mechanical, Electrical and Plumbing inserts will be paid separately).

Erection & Installation of Precast/Prestressed Concrete elements in correct & final position with proper line level and plumb at site making all arrangements (i.e cranes, push-pull jacks & all another T & P for lifting Placing & Alignment of elements, within erection tolerance as per IS 15916 as per approved shop drawings and all complete as per the direction of Engineer-in-Charge but excluding the cost of sim pads, non shrink grout and steel works i.e hangers. All work up to fifth floor.

M.S. Grill gate made out of M.S. flat conforming to IS 2062/20006 painted with red oxide primer as pe the design approved.