SPECIAL REPAIRS TO BLDG NO P-32, P-3, PROVN OF OFFRS TOILET FOR OFFRS WAITING ROOM AT ACCIDENT AND EMERGECY DEPTT AT MH AND CERTAIN SANCTIONED WORKS UNDER GE KAMPTEE

Amount

Dismantling floor, hearth or wall tiling including cement mortar beddeing (but not backing), removing serviceable tiles to store and debris complete all as specified and as directed.

M&L for light shade vitrified ceramic tiles 10mm thick (square/rectangular), polished, area of each tiles not exceeding 0.36 sqm as in floors etc, set and jointed in neat cement slurry and pointed in white or coloured cement to match over 15mm thick screed bed or bedding layer in cement mortar 1:4 complete all as specified and as directed.

All as per item No 2 above but on vertical surfaces complete all as specified and as directed.

M&L for coloured non skid ceramic tiles 7 to 8mm thick (square/ rectangular) area of each tile exceeding 0.06 sqm but not exceeding 0.11 sqm, in floors etc set and jointed in neat cement slurry and pointed with white or coloured cement to match over and including 15mm thick screed bed of cement mortar (1:6) etc complete all as specified and as directed.

M&L for coloured glazed ceramic tiles 300x450x6 to 7mm thick, in floors etc set and jointed in neat cement slurry and pointed in white cement mixed with pigment to match the shade of tiles including rendering 10mm thick in CM 1:4 complete all as specified and directed.

Taking down existing water proofing treatment including PCC padding, mortar etc and disposal of rubbish outside of MD land and hacking for key, scrubbing down with water complete all as specified and directed.

M&L for provision of water proofing treatment by using APP torch on non woven polyster film reinforcement with 3mm thick and weight not less than 3.50 kg/sq m over roof and vertical surfaces including preparation of surfaces and applying oil based bituminous primer coat @ 0.30 ltr per sqm on clean and dry surface and then providing APP membrane laid with 100 mm over lap on both sides all as per manufacturer's instructions including 20mm thick screed bed in CM 1:6 and aluminium paint over membrane complete all as specified and directed.

Demolition of RCC of any description and in any position not otherwise specifically provided for and disposal of unserviceable materials, debris and rubbish to a distance not exceeding 100m complete all as specified and directed.

M&L for formwork to soffits of suspended slabs such as roof slabs, floor slabs, landings and similar work; not exceeding 200mm thick (Horizontal or sloping) complete all as specified and directed.

M&L for formwork to edges of concrete flats, treads, breaks in floors, window cills, concrete railings, openings in concrete walls, floor and roofs not exc 20cm wide complete all as specified and directed.

M&L for RCC 1:2:4 type B1 (using 20mm graded stone aggragate) for slab supported on walls, beams and coloumns in floors roofs, landings, balconies, canopies, deck slab and in shelves and the like complete all as specified and directed.

S&F mild steel TMT bars 10mm dia and over, cut to length, bent to shape required, including cranking, bending and binding with mild steel (anneal) wire not less than 0.90mm dia complete all as specified and directed.

S&F mild steel TMT bars 8 to 10mm dia as in stirrups, spacers and binders complete all as specified and directed.

Demolition of un-reinforced cement concrete in ground floors and pavings not exceeding 15cm thickness, (Below or above ground level) and disposal of unserviceable materials, debris and rubbish to a distance not exceeding 100m complete all as specified and directed.

M&L for cement concrete 1:4:8 type D2 (using 40mm graded stone aggregate) as in foundation filling and mass concrete complete all as specified and directed.

M&L for 75mm thick PCC (1:3:6) type C1 (using 20mm graded stone aggregate), as in plinth protection/ path and finishing surfaces even & smooth without using extra cement including mastic filling in the joint complete all as specified and directed.

M&L for coloured chequred tiles 300 x 300 x 25mm thick, rubber glossy finished, set jointed and pointed in neat and cement slurry in floors with grey cement and pigment incl screed bed or bedding layer of mortar 15mm thick for laying floor finishes in cement mortar 1:6 complete all as specified and directed.

S&F pre-polished granite 18-20mm thick fixed on platform/ shelves over 20mm thick screed bed in cement mortar 1:4 including necessary moulding etc complete all as specified and directed.

Demolition of brick work, built in cement mortar or cement lime mortar including all quoins, pillars etc and disposal of unserviceable materials, debris and rubbish to a distance not exceeding 50m complete all as specified and directed.

M&L for brick work with fly ash brick old size straight or curved on plan exc 6m mean radius built in CM 1:6 complete all as specified and as directed.

All as per item No 20 above but half brick wall in CM 1:4 complete all as specified and directed.

M&L for 40mm thick damp proof course to horizontal or vertical surfaces including necessary formwork in 1:2:4 type B-0 complete all as specified and directed.

Cutting grooves in brick wall, 75mm wide and 65mm deep and shaping horizontal face of groove with cement mortar 1:3 complete all as specified and directed

S&F wire netting of galvanised steel wire 0.71mm dia and size of mesh is 12mm fixed in properly with suitable nails for repair of cracks at various locations in wall, beam, chajja, facis, slab, lintel etc including taking down plaster of cracked portion and making good the area by rendering in CM 1:3 complete all as specified and directed.

Taking down cement plaster on brick or stone walls, etc., including raking out joints, hacking for key, scrubbing down with water, etc. including removal of debris, complete all as specified and as directed

M&L for rendering 15mm thick on brick work or concrete surfaces with CM (1:6) finished even and smooth without using extra cement complete all as specified and directed.

M&L for rendering 15mm thick in CM 1:4 on fair faces of brick work or concrete surfaces finished even and smooth without using extra cement complete all as specified and directed.

M&L for preparation of new undecorated plastered surfaces of wall and applying three coats of white wash etc complete all as specified and as directed.

M&L for prepartion of new plastered surface and applying two coats of oil bound distemper over 3mm wall care putty complete all as specified and directed.

M&L for complete removal of existing treatment and applying two coats of oil bound distemper over 3mm thick wall care putty complete all as specified and directed.

M&L for preparation of newly plastered surfaces of wall & applying two coats of cement base paint over a coat of primer complete all as specified and directed.

M&L for complete removal of existing treatment of old decorated wall surfaces and applying two coats of cement based paint over a coat of primer complete all as specified and directed.

Dismantling of timber fillets unframed under 40 Sq cm in section complete all as specified and directed.

Taking down chowkat or frame with shutter (without taking off shutter from the frame) not exc 1.5 sqm each, making good disturbed surfaces and removing materials from site of work complete all as specified and directed.

All as per item No 34 above but of size exc 1.5 Sqm and not exc 4 Sqm each complete all as specified and directed.

Taking down shutter of any description exc 1 Sqm but not exc. 2 Sqm each and removing from site complete all as specified and as directed.

M&L for framed work such as grills, gratings, etc with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work conforming to Fe.290.Gde-E-165 complete all as specified and directed.

S&F 30mm thick flush shutters solid core construction with block board core and plywood face panels commercial type on both sides complete all as specified and directed.

S&F 30mm thick 2nd class hard wood factory made glazed and skeleton shutters, open rebated and prepared to receive glass, gauze, etc. (without sash bars), edges of framing plain, chamfered or rounded. fitted with cut and mitred beads for securing glass, etc.; sizes of me-mbers of shutters as specified in SSR Part I, Section 8, clause 8.24 (a), kiln seasoned and chemically pressure treated complete all as specified and as directed.

S&F ECO-4000 series pre-coated double rebated openable windows or ventilator made out of galvanised steel colour coated/ powder coated (base steel as per IS 513 of 'D' quality galvanised as per IS 277 with zinc of 120gm/ Sqm) with total thickness of coating 0.58 microns finished painted with polyster paint12-16mm microns thick and back coated with alkyd backer 5-7 microns thick or powder coated with polyster powder upto 50-60 microns thick outer frame section 72x55mm, centre mullion section 72x50mm, shutter section 47 x 20mm, fly mesh section 40x20mm and the fxed glass beading section 12x12mm outer frame and mullions shall consists rebate for glazed shutter, fly mesh and 20mm provn for guard bars/grills, the section cut to length miter joints with corner brackets, centre mullions fixed with mullion cap, stay handles, latch 2 Nos of heavy duty stainless steel pivot hinges per shutter and panelled with 5mm thick plain float glass and stainless steel(304 grade) mesh for fly mesh shutter fixed with EPDM gasket incl fixing windows with concrete/ stone or brick masonry wall by means of self expanding sleeves and driving MS electroplated 80mm long bolt into the sleeve through frame (minimum 4 Nos fro 1600 mm high windows, 3 nos for 1200mm or less windows and 2 Nos in ventilators), including 10mm Square bars welded to 6 x 12mm flat at a distance 125mm c/c etc complete all as specified and directed. Make:- SECCOLAR of NCL ALLTEK & SECCOLAR Ltd, AP and M/s Ashwani & Sons, Ghaziabad.

S&F stainless steel wire cloth 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with tinned tacks or galvanised wire staples complete all as specified and as directed.

S&F 4mm thick sheet glass ordinary quality, glazing with oil putty and glazing pin and wood bid in square not exc 0.5 sqm in each pane complete all as specified and directed.

S&F solid PVC door frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with M.S square tube, S&F in opening as per specification complete all as specified and directed.

S&F factory made solid PVC moulded door shutter, 28 to 30mm thick (stiles), with 4mm thick moulded laminated PVC Sheet on the front face & 4mm plain colour PVC sheet on back face, with wood free EPS S&F in frame at site as per specification & drawing complete all as specified and directed.

S&F butt hinges medium weight, stainless steel of 100mm size complete all as specified and as directed.

S&F 150mm long aluminium, anodised barrel tower bolt of extruded section complete all as specified and directed.

S&F aluminium anodised barrel tower bolts of extruded section and fixed of 100mm long complete all as specified and directed.

S&F 125mm extruded aluminium handles fabricated type anodised etc complete all as specified and directed.

S&F 300mm aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded section or cast-aluminium alloy and fixed complete all as specified and directed.

M&L for preparation of untreated new wooden surface of any description over 10cm width or girth and applying two coats of synthetic enamel paint over a coat of pink primer complete all as specified and as directed.

M&L for applying one coat of synthetic enamel paint to old painted wooden surfaces of any description, not oterwise described, over 10cm width or girth including preparaton of surfaces complete all as specified and directed.

M&L for preparation of new steel surfaces of any description not otherwise described, exc10cm width or girth & applying with two coats of synthetic enamel paint over a coat of red oxide primer complete all as specified and directed.

M&L for preparation of new steel surfaces and applying two coats of synthetic enamel paint complete all as specified and directed.

M&L for preparation of old steel surfaces of any description not otherwise described, exc 10cm width or girth & applying two coats of synthetic enamel paint complete all as specified and directed.

Cutting chases for concealed water tubing or concealed conduit wiring, etc and making good, cutting not exc 10cm girth in cement mortar 1:3 complete all as specified and directed.

S&F in repairs GI tubing 15mm bore medium grade with all fittings and fixed to wall including taking up or down steel tubing and connection complete all as specified and directed.

S&F in repairs GI tubing 20mm bore medium grade with all fittings and fixed to wall including taking up or down steel tubing and connection and complete all as specified and directed.

S&F in repairs vitreous china wash down water closet (pedestal pattern) 'P' or 'S' trap including jointing including plastic water closet seat, closed pattern with flat bottom and cover and mild steel CP or aluminimised hinging device complete all as specified and directed.

S&F in repairs wash hand basin (flat back or angle back) of size 550 x 400mm white including waste pipe, chain and plug, porcelain stopper including for & pinning in ends of brackets including supply & fixing of waste pipe complete all as specified and directed.

Supply only vitreous china pedestal for above WHB white complete all as specified and directed.

S&F in repairs 10 ltr capacity PVC valve less symphonic action type flushing cistern low level, white with inlet ball valve float and handle including bracket etc complete all as specified and directed. Make:- Prayag Cat No 501 or equivalent.

S&F in repair bib tap 15mm dia cast copper alloy with crutch or butter fly handle screwd for iron pipe or for brass ferrule and fixed complete all as specified and directed.

S&F in repairs chromium plated shower rose with or without swivel joints of 125mm dia including fixing to 15mm bore of pipe complete all as specified and directed.

S&F in repair pillar cock, swan neck central hole basin mixer without pop up waste system complete all as specified and directed. Make:- Prayag Cat part No 8750 or equivalent in Hindware / Cera.

S&F in repair health faucet with 1 mtr tube & hook (braded tube) complete all as specified and directed. Make:- Prayag Cat part No BEA-85 or equivalent in Hindware / Cera.

S&F in repair long shank and cup (concealed type) stop valve 15mm dia chromium plated fancy type, high pressure with crutch or butter fly handle screwd for iron pipe or union and fixed complete all as specified and directed.

S&F in repair PVC connection 15mm dia, 450mm long including PTMT check nut complete all as specified and directed.

S&F PVC connection 15mm dia, 450mm long including PTMT check nut complete all as specified and directed.

S&F in repairs stop valve/ angle valve 15mm dia cast copper alloy high pressure with crutch or butter fly handle screwd for iron pipe or union and fixed chromium plated fancy type complete all as specified and directed.

S&F in repairs curtain rod fancy type harrison rails, mild steel, chromium plated with fixing brackets, stops, rollers etc complete all as specified and directed.

S&F fancy type curtain brackets of approved quality fixed to wall with screws complete all as specified and directed.

S&F in repair towel rail complete all as specified and directed. Make:- Prayag Cat part No BA-40 or equivalent in Hindware / Cera.

S&F towel rail complete all as specified and directed. Make:- Prayag Cat part No BA-40 or equivalent in Hindware / Cera.

S&F in repair soap dish, chromium plated, approximate size 160x 160x 90mm fixed to plugs with chromium plated brass screws etc complete all as specified and directed. Make:-Prayag Cat part No BA-05 or equivalent in Hindware / Cera.

S&F in repair corner glass shelf 300mm complete all as specified and directed. Make:- Prayag Cat part No BEA-46 or equivalent in Hindware / Cera.

S&F in repair peg set 6 plugs with chromium plated brass screws etc complete Make:- Prayag Cat part No BEA-30 or equivalent in Hindware / Cera.

S&F in repair toilet paper holder complete all as specified and directed. Make:- Prayag Cat part No BA-48 or equivalent in Hindware / Cera.

S&F in repair PVC cabinet mirror of size 400x500 for bathrooms complete all as specified and directed. Make:- Prayag Cat No 554 or equivalent.

S&F in repair towel ring complete all as specified and directed. Make:- Prayag Cat part No BA-41 or equivalent in Hindware / Cera.

S&F in repair wall mixer, 3 in 1 system with provision for both hand shower and overhead shower complete with 115mm long bend pipe connecting legs & wall flange complete all as specified and directed. Make:- Jaquar cat part No FUS-29281 or equivalent in Prayag.

S&F in repair 100mm dia PVC (SWR) gully trap 125/110 mm, setting and jointing with solvent cement complete all as specified and directed.

S&F waste fitting, 32mm/40mm brass, chromium plated for sink, basin, etc with long screwd shank and fly nut complete all as specified and directed.

S&F in repairs 40mm bore low density polyethylene pipe (LDPE) of pressure rating 6kg/cm fixed complete all as specified and directed.

S&F in repair sinks with drainage board made of stainless steel thick kitchen or laboratory with plugs, washers and wastes; including bedding in cement mortar to dwarf wall or including fixing cantilever brackets and connecting union to pipe overall size 915mm x 460mm bowl size 410mm x 330mm x160mm including waste pipe 32mm dia complete all as specified and directed.

S&F in repair 110mm bore PVC (SWR) pipe, single socketed in any length with rubber ring joints, fixed to walls with stack clamp every one mtr apart complete all as specified and as directed.

S&F 110mm bore PVC (SWR) pipe, single socketed in any length with rubber ring joints, fixed to walls with stack clamp every one mtr apart complete all as specified and as directed.

M&L for providing concrete bed to drain pipe including packing under and hauching against the sudes of pipes after they are laid and tested, in cement concrete 1:3:6 type C1 (using 20mm graded stone aggregate) complete all as specified and directed.

S&F PVC (SWR) pipes of 75mm bore single socketed, in any length with rubber ring joints, laid in trenches or in floors complete all as specified and directed.

Dismantling water tank of capacity exc 250 ltr & not exc 500 ltrs and removing to store of any description complete all as specified and directed.

S&F 500 ltrs capacity rotational moulded multi layer polyethylene water storage tanks (Cylindrical vertical with closed top) including float valve, rod and ball hoisted and fixed in position including connections complete all as specified and directed.

Dismantling boarding, any description, fixed in any position with nails complete all as specified and directed.

S&F plywood board, 19mm medium density, flat pressed single layer type or threelayer type with BWR type adhesive, fixed with screws to frame complete all as specified and directed.

S&F prelaminated particle board, interior grade prelaminated one side decorative choice lamination & other side balancing white lamination, fixed with screws to timber frame work complete all as specified and directed.

S&F continuous (piano) hinges, mild steel, bright finish or electrogalvanised complete all as specified and directed.

Dismantling of asbestos cement (Corrugated, semi corrugated etc.) of any thickness including ridges hips valleys as in roof covering complete all as specified and directed.

S&F mild steel work such as roof trusses (framed), trussed, purlins and heavy bracket framing (Beam, Tee, angle, Channel or flat section) including distance pieces, cleat etc complete all as specified and directed.

M&L for 0.50mm thick prepainted galvalume aluminium zinc coating GI based corrugated steel sheet of any colour having tensile strength of 550 MPA as in roof covering, fixed with and including J/L hooks or self tapping screw as per manufacturer instructions complete all as specified and directed.

M&L for 0.50mm thick prepainted galvalume aluminium zinc coating GI based plain steel sheet of any colour having tensile strength of 550 MPA as in ridges/valley, fixed with and including J/L hooks or self tapping screw as per manufacturer instructions complete all as specified and directed.

Surface excavation in soft/loose soil not exc 30cm deep and averaging 15cm deep and getting out etc complete all as specified and directed.

Excavation in trenches not exc 1.5m in deepth and 1.5m in width and getting out in soft/loose soil complete all as specified and directed.

M&L for form work to side of concrete in foundations, footing base, base of columns, side and soffits of plinth beam and simillar work complete all as specified and directed.

M&L for providing reinforcement cement concrete 1:1 1/2:3 type A1 (using 20mm graded stone aggregate) as in footing, foundation, beams, plinth beams, base for columns and mass concrete etc complete all as specified and directed.

M&L for form work to side of columns and similar work complete all as specified and directed.

M&L for providing RCC 1:1 1/2:3 type A-1 (nominal mix) as in columns and pillars etc complete all as specified and directed.

M&L for form work to side of sides and soffits of floor or roof beams, beam haunchings, girders, bressummers, lintels, and similar work complete all as specified and directed.

M&L for providing reinforcement cement concrete 1:1 1/2:3 type A1 (using 20mm graded stone aggregate) as in lintel beam, roof beam, landing balconies, canopies, desc slabs and the shelves and the like complete all as specified and directed.

M&L for form work to chullah hoods, chajjas, troughs and similar items including edges and similar work complete all as specified and directed.

M&L for providing reinforcement cement concrete 1:1 1/2:3 type A1 (using 20mm graded stone aggregate) as in chajja etc complete all as specified and directed.

M&L for mild steel work in tubular/square hollow trusses, purlins, rafter and tubular posts including special shaped washers etc complete using ERW or induction butt welded tubes conforming to IS 1161-1979 Grade St-240 with one shop coat of zinc chromate primer paint etc complete all as specified and directed.

M&L for 4mm thick non asbestos, fibre cement building board of size 595x595mm size fixed over snap grid framework for false ceiling comprising of the following section for making partition of 600x600 mm size fixed to wall with rawl plug and screw and hanged to roof with 4mm dia GI suspended wire of suitable length and butterfly clip of size of main Tee shall be 32mmx 24mmx 0.30mm, cross tee shall be 28mmx 24mmx 0.30mm thick with black lining in mid portion and wall angle shall be 24mmx 24mmx 0.30mm thick complete all as specified and directed.

M&L for moorum/ red bajri filling in floors or pavings, laid in layers not exc 15cm thick, spread, levelled and rammed including watering complete all as specified and directed.

M&L for hardcore of gauge not exc. 63mm deposited, spread and levelled in layers not exc 15cm thick watered and rammed to a true surface for plinth protection/ path complete all as specified and directed.

M&L for 75mm thick cement concrete 1:4:8 type D2 (using 40mm graded stone aggregate) as in sub base to floors finished even complete all as specified and directed.

M&L providing 25mm thick cement concrete 1:2:4 type B1 (Using 20mm graded stone aggregate), as in sub base in floor/paving etc complete all as specified and directed.

Returning, filling in, including spreading, levelling, watering and well ramming in layers not exc 25cm in hard/dense soil complete all as specified and directed.

Removing excavated material (soil) not exc 50m and deposited where directed at a level not exc 1.5m above the strating point complete all as specified and directed.

M&L for PCC 1:2:4 type B1 (using 20mm graded stone aggregate) as in cills, steps, seismic and other similar bands, plinth courses, lacing courses parapets and railing upto 60cm height, copings, kneelers, bed plates, hold fasts block, filling on pressed steel door frame etc complete all as specified and as directed.

M&L for cement concrete 1:2:4 type B-1(using 20mm graded stone aggregate) as in roof kerbs or mud stops, steps, rounded or chamfered on edges complete all as specified and directed.

M&L for steel windows with side hung shutters including projecting type hinges with steel handle and steel peg stay, complete with glazing bars, dovetailed or welded complete all as specified and directed.

All as per item No 120 above, but without glazing bars complete all as specified and directed.

M&L for 4.0mm thick frosted sheet glass ordinary quality and glazing with oil putty in square not exceeding 0.5 Sqm in each panes complete all as specified and directed.

S&F wall mounted vitreous china wash down water closet 'P' trap round of size 620x 360x 780mm along with soft close seat cover and twin flush (Aquafier EWC P Trap) white colour with all fitting including jointing mild steel CP or aluminimised hinging device complete all as specified and directed. Make:- Prayag cat No 4125 or equivalent in Hindware/ Cera/ Jaquar.

S&F vitreous china urinals, half stall type, including providing and fixing plugs, bedding urinal against wall in cement mortar 1:2, securing urinal to plugs with and including 60mm long brass screws, pointing around urinal back in cement; fixing automatic flushing cistern with brackets, flush pipe, grating and union for discharge pipe complete all as specified and directed.

S&F 15mm bore CP urinal spreader for urinals complete all as specified and directed.

S&F one piece wash hand basin (520x310x140mm) white colour complete all as specified and directed Make:- Prayag cat No 4718 or equivalent in Hindware/ Cera/ Jaquar.

S&F 32mm bore brass chromium plated bottle traps for wash basins with inlet and outlet screwed for pipe or connections including necessary packing, union and cap and fixed, complete all as specified and as directed.

S&F rotational moulded polyethylene water storage tank of 1000 ltr capacity (cylindrical vertical with closed top) hoisted and fixed in position including float valve, rod and ball complete all as specified and directed.

S&F twin bib taps fancy type chromium plated, with crutch or butterfly handle screwed down, screwed for iron pipe or for brass ferrule and fixed of 15mm bore size complete all as specified and directed. Make:- Prayag cat No 7612 or equivalent.

S&F bib taps fancy type chromium plated, with crutch or butterfly handle screwed down, screwed for iron pipe or for brass ferrule and fixed of 15mm bore size complete all as specified and directed.

S&F pillar cock tall height fancy type cast copper alloy, chromium plated 15mm dia of bore complete all as specified and directed. Make:- Prayag cat No 7903 or equivalent.

S&F angle cock fancy type chromium plated, screwed down, high presure with crutch or butterfly handle screwed both ends for iron pipe of 15mm bore pipe complete all as specified and directed. Make:- Prayag cat No 8710 or equivalent.

M&L for 15mm GI tubing 'Medium grade' with all fitting and fixed complete tom wall and celing or laid in floor complete all as specified and directed.

All as per item no 133 above but 20mm bore complete all as specified and directed.

S&F PVC (SWR) floor trap, plain with grating including jointing with solvent cement of 75mm dia complete all as specified and directed.

S&F CP grating of size 100mm dia complete all as specified and directed.

S&F PVC(SWR) slotted vent cowl 75mm size complete all as specified and directed.

M&L for providing cement concrete 1:2:4 type B2 (Using 40mm graded stone aggregate) as in foundation, mass concrete and filiings complete all as specified and directed.

M&L for precast reinforced cement concrete 1:2:4 type B1 (using 20mm graded stone aggregate) as in landings, cover slabs (for manholes etc.) chullah hoods, chajjas, mangers, shelves and similar articles with plain faces and set in CM 1:6 (reinforcement measured and paid separately) complete all as specified and directed.

Excavation in post holes not exc 0.5 cum getting out, returing and filling in & raming earth or broken rubble mixed with earth around, in layers not exc 25cm, watering and removing surplus soil to a distance not exc 50m and making good surface complete all as specified and directed.

M&L for cement concrete 1:3:6 type C2 (using 40mm graded stone aggregate) as in foundation filling and mass concrete complete all as specified and directed.

S&F post and struts including cutting tops to shape as directed, drilling holes notching for wire, etc. flat iron fillets (for securing wire mesh etc.) including all necessary drilling, bolting or riveting, etc.and similar work complete all as specified and directed.

S&F steel work in tubular trusses including special shaped washer etc. complete using ERW or induction butt welded tubes conforming to IS1161-1979 grade St.-240 cleat etc complete all as specified and directed.

S&F plates (plain or chequered) channels, square cut or notched (ordinary and counter sunk) forming holes, with riveted, bolted or welded attachment etc complete all as specified and directed.

S&F MS flat iron of any size conforming to Fe 290 Grade E-165 cut to required size for fixing chain link fencing with clamp etc complete including drilling holes complete all as specified and as directed.

M&L mild steel screw bolts (machine made) with hexagonal or square heads at one end and scewed the other, each screwed end to be fixed with one washer and one hexagonal nut, the other end to be embedded in RCC fencing post while casting for fixing chain link fencing, dia of bolt neck 11 to 15mm and length of bolt exc 5cm but not exc 10cm long, complete all as specified and as directed.

Supply only chain link MS galvanised fencing, any size or type complete all as specified and directed.

Fixing only chain link fencing including line wire, any mesh, size and type to any type of standards, rails, straining bolts, etc including provission of binding wire complete all as specified and directed.

S&F galvanised two strand steel barbed wire 2.24mm dia barbed with 2mm dia barbs at 75mm spacing and straining and fixing to any type of standard rails straining bolt including securing or tying at crossings with and provision of galvanised mild steel wire, staples or steel pins etc complete all as specified and directed.

M&L for flush pointing to brick work laid on edge in CM (1:4) in floor, wall, pillars etc complete all as specified and directed.

M&L for grit finish over new plastered surface complete all as specified and directed.

M&L for preparation of new plastered surfaces and applying two coats of exterior emulsion paint over a coat of primer as per maufacturer's instructions complete all as specified and directed.

M&L for sand filling under floor or in foundation including watering and consolidation etc complete all as directed.

M&L for machine pressed precast conctete coloured interlocking paver block, rubber pressed glossy finished any shape and size confirming to IS 15658-2006 of 60 mm thickness, M-35 Grade etc complete all as specified and directed.

M&L for PCC 1:3:6 type C1 (using 20mm graded stone aggregate) as in roof kerb or mud stops; rounded or chamfered on edges including necessary formwork complete all as specified and directed.

Disconnectiong existing tanks of capacity exc 250 & not exc 500 Ltrs, setting aside (or lowering if required) for repairs, cleaning, etc and hoisting if required reconnecting and re-fixing in position including cleaning and removing all the scale and dirt, etc from tank and from months of circulating pipes etc and writing the date as like "TANK CLEANED ON 10 DEC 2020" white or black thick synthetic enamel paint complete all as specified and directed.

Cutting existing steel tubing for alterations or additions (Each cut measured) and screwing existing steel tubing (or lengthening screw on pipe to form connector) complete all as specified and directed.

Taking down point wiring with aluminum conductor cable of light point fan & socket light & power complete including light fittings any type switches, sockets, ceiling rose, switch boards, bell/ buzzer, bell push, tube light fitting, regulator etc, and making good to the disturbed surfaces of walls/ floor etc to match with existing surfaces including white washing/ colour washing/ distemper to match with existing wall/ floor/ ceiling finishes complete all as specified and directed.

Taking down sheet metal enclosure DB, MCB, main switch etc and making good disturbed surfaces to match with existing surfaces complete all as specified and directed.

Taking down sub main wiring of any size/ capacity and making good disturbed surfaces to match with the existing surfaces complete all as specified and directed.

M&L for point wiring 1100 volt grade single core FRLSH PVC insulated and unsheathed cable with multistranded copper conductor 1.50 sqmm drawn in and including electrical grade PVC conduit not less than 20mm dia with IS 9537 (Part-III) 1983 marked medium grade concealed in surface of wall/ ceiling including FRLSH PVC insulated unsheathed earth wire with multistranded copper conductor of size 1.50 sqmm pressed steel modular boxes sunk on wall for mounting of modular switches, switch sockets, fan regulator etc including modular cover with frame any size complete all as specified and making good disturbed surfaces for one light point controlled by one, one way switch. Note:- Cost of cable provided from sub main DB to respective switch board in rooms shall be included in the quoted point wiring rate. All switches, fan, sockets, ceiling roses and holders shall be connected to common earth dolly.

All as per item No 161 above but one ceiling /exhaust fan point controlled by one switch and regulator complete all as specified and directed.

All as per item No 161 above but one 3 pin 5 amp socket out point on the same board with other switches complete all as specified and directed.

All as per item No 161 above but one 3 pin 5 amps socket out let point on independent board complete all as specified and directed.

All as per item No 161 above but one bell/ buzzer point controlled by one bell push complete all as specified and directed.

All as per item No 161 above but wiring with 2.5 sqmm multi stranded cable and earth wire with copper conductor of size 2.5 sqmm for 15 amps power point complete all as specified and directed.

M&L for sub main wiring with two single core PVC FR LSH insulated unsheathed stranded copper conductor and earth wire 1100 volt grade and drawing into PVC conduit not less than 20mm medium grade concealed in wall of size 2x 4.0 Sqmm with earth wire of 1x4.0 Sqmm complete all as specified and directed. Note:- Accessories for point/sub main wiring like PVC junction box, bend, Tee, elbow shall be of same make.

All as per item no 167 above but wiring with 2X2.5 sqmm wire and 1X2.5 sqmm earth wire complete all as specified and directed.

S&F ceiling rose surface type 2/3 terminal 5 amps complete all as specified and directed.

S&F modular switch one way 6A, 1 module complete all as specified and directed.

S&F modular switch one way 16A, 1 module complete all as specified and directed.

S&F modular socket 6A 2/3 pin combined 2 module complete all as specified and directed.

S&F modular socket 6A/ 16A, 2/3 pin combined 2 module complete all as specified and directed.

S&F modular fan step regulator, 120 watt 2 module complete all as specified and directed.

S&F bell ding dong, AC 230V single phase complete all as specified and directed.

S&F bell push modular 6A, 1 module complete all as specified and directed.

S&F lamp holder insulated body with back plate for angle/ batten fitting complete all as specified and directed.

S&F highly durable surface mounted 18/20 watts LED batten/ surface constructed of fire retardant engineering grade extruded aluminium and decorative end cap complete with tube rod, driver including 3 core 1.0 sqmm copper conductor cable, 240V, 50Hz, 2000lumen, 100 lumen per watt for connection and accessories complete all as specified and directed. Make:- CG Cat part No LDL-20-CDL or equivalent in Philips/ Luker.

S&F light fitting 9W bulk head luminaries with lamp holders etc complete with all accessories and including connecting up with twin core twisted flexible cable of suitable size of 230V, 50HZ complete all as specified and directed. Make:- CG Cat Part No LBHP-10-CDL or equivalent in Philips/ Luker.

S&F highly durable surface mounted 10 watts LED batten/ surface constructed of fire retardant engineering grade extruded aluminium and decorative end cap complete with tube rod, driver including 3 core 1.0 sqmm copper conductor cable, 240V, 50Hz, 1000 lumen, 100 lumen per watt for connection and accessories complete all as specified and directed. Make:- CG Cat part No LDL-10-CDL or equivalent in Philips/ Luker.

S&F building security light LED 25 W with lumen O/P 1800 with driver with rated voltage 240 V, 50Hz including mounting GI (made out of 25mm dia light grade pipe 0.8 m bent to shape) including FI clamps nut bolts etc complete all as specified and directed. Make:- CG Cat Part No LSTS-25-CDL or equivalent in Philips/ Luker.

S&F fittings with surface mounted LED down lighters 12 W including driver with rated voltage 240 V, 50 Hz complete all as specified and directed. Make:- CG Cat part No LCDEP-12-CDL or equivalent in Philips/ Wipro.

S&F sheet metal enclosure single pole & neutral for 240 volts, 8 way with 200 Amp rated bus bar flush /surface mounting double door complete all as specified and directed.

S&F sheet metal enclosure single pole & neutral for 240 volts 4/6 way with 200 Amp rated bus bar flush /surface mounting double door, complete all as specified and directed.

S&F MCB single pole 240 volt 6 to 40 amps 10 KA breaking capacity, 'C' series complete all as specified and directed.

S&F MCB single pole and neutral 240 volt 6 to 40 amps 10 KA breaking capacity, 'C' series complete all as specified and directed.

M&L for earthing complete with galvanized street earth plate electrode 600 x 600 x 6mm thick buried directly in ground (earth plate not less than 2.25mtr deep below normal ground level) with top edge of the plate not less then 1.50 mtr below the normal ground level connected to galvanized earth lead wire 4.00 mm dia by means of bolts nuts check nuts & washer of galvanized iron or steel all as shown in electrical plate No 5 connected to earthing test point all as specified and testing on completion including the material and labour for:- (a) Excavation and earth work or drilling hole for electrode in any type of soil. (b) PCC pit in cement concrete 1:2:4 type B-1. (c) Pre cast RCC cover with suitable handle 40mm thick in PCC 1:2:4 reinforced with welded steel wire fabric weighting not less than 1.87 Kg/sqmm. (d) Funnel with watering pipe of GI 20mm nominal bore medium grade and Aluminum lugs etc all as specified. (e) 15mm nominal bore medium grade GI protection pipe up to 7.50 meter. long for protection of earthing lead. (f) Requisite quantity of charcoal and common salt. (g) Connection to earthing test point and testing on completion.

S&F MCCB TPN 40amps 415V 16KA 50Hz with enclosure connecting with incomer cable and main DB using 10x4 sqmm FRLSH wire complete all as specified and directed.

S&F MCB triple pole and neutral 415V, 40 to 60 amp, 10KA complete all as specified and directed.

S&F exhaust fan 300mm sweep, metallic body, single phase 240V 50Hz and connecting up with 3 core 1 sqmm wire from fan to ceiling rose complete all as specified and directed.

Excavation in trenches for laying of cables, poles and stay in any type of soil not exceeding 1.5 mtr wide and not exceeding 1.50 mtr deep and getting out complete all as specified and directed.

Returning filling in, including spreading, leveling watering and well ramming in layers not exceeding 25 cms thick complete all as specified and directed.

Removing excavated materials not exceeding 50 Mtr and depositing where directed at a level not exceeding 1.5 mtr above the starting point complete all as specified and directed.

S&F double wall corrugated high density polymer ethyl (HDEP) pipe for laying of electric cable of size 50mm outer diameter and 38mm inner diameter with IS 14930 (part 2) 2001 and 6mm thickness laid in trenches, wall, floor, pole including bends, sockets and other connected accessories complete all as specified and directed.

Supply and laying in trenches or fixing in walls / poles or drawing through pipe XLPE insulated, screened, PVC bedded, galvanised steel strip or wire armoured, electric power cables (heavy duty) with aluminium conductor, 1100 volts, grade cross sectional area 6 sq mm, 2 core including testing after laid and jointed complete all as specified and directed.

S&F LED bollard fitting inverted pyramid tripod with soft 360 degree light IP 65 protection with 1.5 sqmm wire connected to cable junction box included fitted to PCC structure complete all as specified and directed. Make:- CG Cat part No LBLSN 10 CDL/ JADO of K Lite or equivalent in Philips.

NOTE:- SCHEDULE OF CREDIT (Amount shall be deducted offline from the total quoted amount to workout the net contract sum to be considered for acceptance.) [(-) Rs.43,918.00]

M/s B S Jain

SHUB CONSTRUTION

M/s Jagdish Staioners and General Stores

M/s DS Khekde

M/s M.G. Hargunani

DE PRETTY AND CO

Bidder Name

DE PRETTY AND CO

SHUB CONSTRUTION

M/s B S Jain

M/s DS Khekde

M/s Jagdish Staioners and General Stores

M/s M.G. Hargunani

NORTH INDIA PEST CONTROL