REPAIR AND MAINTENANCE OF INTERNAL ELECTRIFICATION, FITTINGS AND FIXTURES INCLUDING FLAME PROOF LIGHTS INCLUDING EARTHING OF OTM AT SITE E AND AMDALLI TOWNSHIP UNDER GE (SB) KARWAR.

Amount

Rectifying the defects in domestic fluroscent tube light fittings/wall security light fitting/CFL fittings any type and at any height by tightening loose connections and rectifying defects, testing complete all as directed.

Opening switch mounting plate at normal height upto 1.5 m, rectifying the defects in fittings and fixtures such as switches, bell push, fan regulator, sockets etc by tightening loose connections, refixing switch plate and testing complete all as directed. NOTE for Item 1.00 & 2.00: The unit rate quoted shall be deemed to be included the elements of labour only for rectifying and making the fitting and fixtures functional. If replacement of parts/items is required to make the fittings functional, the cost for labour and material for the same will be measured and paid for under relevant items of this schedule hereinafter and in such cases the above items will not be measured and paid for.

Taking down carefully copper point wiring (light, fan, socket and power) complete(fittings to be measured separately) and making good surfaces of walls/floors etc complete all as specified and directed.

M & L for point wiring complete with 1.5 Sqmm single core PVC (FRLS) insulated, unsheathed 1100 Volts grade cable with multi stranded copper conductor FR grade conforming to IS-694, 1990 and including one run of continuous earth wire to common earth and connected to earth with 1.5 Sqmm PVC (FRLS) insulated unsheathed multi stranded copper conductor cable drawn in existing conduit and making good disturbed surfaces to match with the existing surface complete all as specified and directed by Engr-in-Charge for:

(a) One light/fan point controlled by one switch

(b) One 3/5 pin socket outlet 6 Amp on same board with other switches.

(c) One 3 pin socket outlet 5 Amp on indepenent board.

All as per item No.4.00 above but with cables 2.5 Sqmm for one 3 pin socket outlet 15 Amps on independent board.

All as per item No.4.00 above but with cables 4.0 Sqmm for one 3 pin socket outlet 15 Amps on independent board

Supply & fix in repairs MCB TPN, 6 to 32 Amps, 415 Volts, 3 phase, 10 KA Capacity all as specified and directed. MAKE: Havells Cat No.DCMJCTNF006-032 or equivalent as specified herein after in List of Makes.

Supply & fix in repairs MCB TPN, 40 to 63 Amps, 415 Volts, 3 phase, 10 KA Capacity all as specified and directed. MAKE: Havells Cat No.DCMJCTNF40 to 63 or equivalent as specified herein after.

Supply & fix in repairs MCB SPN, 6 to 32 Amps, 'C Series ,230 Volts, Single phase, 10 KA Capacity all as specified and directed. MAKE: Havells Cat No.DCMJCSNF006-032 or equivalent as specified herein after.

Supply & fix in repairs MCB SP, 6 to 32 Amps, 'C' Series,230 Volts, Single phase, 10 KA Capacity all as specified and directed. MAKE: Havells Cat No .DCMJCSPF006-032 or equivalent as specified herein after.

Taking down ceiling fan/exhaust fan of any sweep, dismantling, replacing defective part, overhauling, cleaning, greasing, rewinding, etc and hanging up/fixing back in the original position, connecting up and testing complete all as directed. NOTE: 1. The unit rate quoted shall be deemed to include for minor items viz nuts,bolts split pin and rubber wheel, however capaciteor & bearing shall be measured sperately under respective items. 2. Rewinding of fan will be measured and paid for separately under respective items.

Supply and fix in repairs ceiling fan regulator electronic step type 230 Volts single phase all as specified and directed. MAKE: Anchor Cat No.14501 or equivalent as specified herein after.

Supply and fix in repairs capacitor of 2.5 mfd for ceiling fan/exhaust fan complete all as specified and directed.

Supply and fix bearing No.6201/6202/6203 for ceiling fan/exhaust fan complete all as directed.

M & L for rewinding ceiling fan 1200/1400 mm sweep with super enamalled copper wire of exisiting gauge including insulation material varnishing and drying all as directed.

Description all as per item No 15.00 above but exhaust fan of 300 mm sweep.

Description all as per item No.15.00 above but exhaust fan of 450 mm sweep, 3 phase 415 Volt.

M & L for rewinding ventilation fans of 1500 to 3400 cmh 3 phase 415 Volt with super enamalled copper wire of exisiting gauge including insulation material varnishing and drying all as directed.

All as per item No.18.00 above but ventilation fan of 6000 to 6500 cmh ,3 phase 415 Volt.

All as per item No.18.00 above but ventilation fan of 14000 cmh ,3 phase 415 Volt.

S & F in repairs ceiling AC single phase 230 V of size 1200 mm sweep with blade and connected wiith flexible cord of size 23 / 0.0076 stranded copper conductor PVC insulated of length not less than 0.7 m complete all as directed. MAKE: Havells ES NEO HSN Code 8414 or equivalent in Orient/Bajaj/Usha/CG NOTE: Old unserviceable fans to be deposited in MES Store for BER purpose.

S & F in repairs ventilator fan AC single phase 230 V of size 230 mm metallic body (white/ ivory) and connected wiith flexible cord of size 23 / 0.0076 stranded copper conductor PVC insulated of length not less than 0.7 m complete all as directed. MAKE: Havells ES NEO HSN Code 8414 or equivalent in Orient/Bajaj/Usha/CG NOTE: Old unserviceable fans to be deposited in MES Store for BER purpose.

Taking down submain wiring cable any number of runs alongwith earth wire from the existing concealed or surfacae conduit and offering credit as per schedule of credit all as directed.

M & L for submain wiring with 2 runs of 4.0 Sqmm single core copper conductor PVC insulated cable and 1 run of 4.0 Sqmm single core copper conductor insulated cable as earthing lead drawn through existing conduit/casing caping all as directed. NOTE: 2 runs of 4.0 Sqmm cable and 1 run of 4.0 Sqmm cable together will be measured as one unit length.

M & L for submain wiring with proper colour coding, FRLS PVC insulated copper conductor, unsheathed, multi stranded copper conductor cable of 2 runs, 6.00 Sqmm for phase and neutral and one run of 6.0 Sqmm for earth wire drawn through existing conduit box fixed in wall/ ceiling etc and connected complete all as specified and directed by Engr-in-Charge. NOTE: Phase should be of Red/Yellow/Blue, neutral should be of black and earthing wire should be of green colour. 2 runs of cable for phase/neutral and one run of cable for earth will be measured and paid as one unit length.

Description all as per item No. 25.00 above but 3 runs of 4 Sqmm and one run of 4 Sqmm in PVC casing caping. NOTE: 3 runs of 4 Sqmm cable and 1 run of 4 Sqmm cable & 1 run of PVC conduit /casing caping together shall be measured as one unit length.

S & F in repairs MCB DB TPN 415 Volt 4 way & single door and factory made complete with bus bar and din channel complete all as directed. MAKE: Havells Cat No.DCDKTHODCW04 or equivalent as specified herein after.

Supply and fix in repairs switch Piano 6 Amps one way flush type, matching with existing make, ISI marked, all as specified and directed. MAKE: Havells Cat No.14121 or equivalent as specified herein after.

Supply and fix in repairs decorative modular switch 6 Amps single pole flush type, matching with existing all as specified and as directed. MAKE: Rider cat no 47101 or equivalent in Roma, all as specified and directed.

Supply and fix in repairs socket outlet 3/5 pin 6 Amps flush type, matching with existing make ISI marked, all as specified and directed. MAKE: Anchor Cat no.14304 or equivalent as specified herein after.

Supply and fix in repairs switch Piano 15/16/20 Amps one way flush type, matching with existing make ISI marked, all as specified and directed. MAKE: Havells Cat No.14401 or equivalent as specified herein after.

Supply and fix in repairs socket outlet 3/5 pin 15/16 Amps flush type multi purpose, matching with existing make ISI marked, all as specified and directed. MAKE: Havells Cat No. 38524 or equivalent as specified herein after.

Supply and fix in repairs switch socket combination 5 pin 16 Amps flush type multi purpose, matching with existing make ISI marked, all as specified and directed. MAKE: Havells Cat No.39447 or equivalent as specified herein after.

Supply and fix in repairs Flame proof switch socket & plug combined in LM6 cable termination box in LM6 ,16A ,250 V , 2P+earth all as specified and as directed.

Supply and fix in repairs PVC white colour Angle / batten holder suitable for GLS light fitting 40/60 Watt All as specified and directed. MAKE: Havells Cat No. 39800 or equivalent as specified herein after.

Supply and fix in repairs Bipin holder, suitable for tube light fittings all as directed.

Supply and fix in repairs Starter, 40 Watt, 240 Volt suitable for tubelight fitting all as directed. MAKE: : Philips/Crompton Greaves/Bajaj

Supply and fix in repairs heavy duty Electronic Ballast for fluroscent tube 36/40 Watt all as directed. MAKE: Bajaj Cat No.BJHF 136/140 P or equivalent as specified herein after.

Supply and fix in repairs heavy duty vacuum pressure impregnated copper Ballast (VPIT) fluroscent tube 28 Watt 240 Volt all as specified and directed.

Supply and fix in repairs heavy duty vacuum pressure impregnated copper Ballast (VPIT) for CFL lamp 9/10/11/13/18 Watt 240 Volt, Low loss electro magnetic ballast all as specified and as directed. MAKE: Bajaj CAT No.Icon 113/118 or equivalent as specified herein after.

Supply and fix in repairs Bulkhead light fitting cast aluminium, LM 6 body, heat resistence glass cover and MS galvanised wire guard suitable for 1 x 9 Watt CFL all as specified and directed. MAKE: Bajaj Cat No.BJBE 19 or equivalent as specified herein after.

Fixing only in repairs fluorescent tube rod 20 / 36 / 40 watt including taking down existing tube rod all as directed. NOTE: Tube rod 20 / 36 / 40 watts will be issued under Sch 'B' free for fixing only.

Supply and fixing in repairs LED flood light luminaire 180 Watt with secondary optics innovative die-cast aluminium flood light with highly efficient LEDs as light source, suitable for highlighting architectural features or retail spaces IP66 protection complete all as directed by Engr-in-Charege. MAKE: Havells Cat No - JetaValourfl180Wled757PintnBltG or equivalent in Philips/ Bajaj/CG

Fixing only in repairs CFL lamp 9/11/18 Watt including taking down existing CFL lamp all as directed. NOTE: CFL lamp 9/11/18 watts will be issued under Sch 'B' free for fixing only.

S & F in repairs LED batten suitable for T8 LED retrofit tube 4' with LED tube rod 18 W, 230 Volts, complete with all connected accessories including connecting up with twin core twisted flexible copper conductor cable of suitable size complete all as specified and directed. MAKE: Havells/ Bajaj/ Philips/ Wipro/ C&S/ Shakti.

S & F in repairs T8 LED tube rod 18/20 W, 4 feet length, 6000K complete with all accessories as specified and as directed. MAKE: Havells/ Bajaj/ Philips/ Wipro/ Shakti/ C&S.

S & F in repairs 10 Watt LED box type light fittings 2 feet including making necessary connection complete all as specified and directed. MAKE: Havells/ Philips/ C&S/ Bajaj/ Shakti.

Fixing only in repairs LED tube rod 18/20 Watt including taking down existing tube rod all as directed. NOTE: LED tube rod 18/20 Watt watts will be issued under Sch 'B' free for fixing only.

Supply and fix in repairs single pole and neutral enclosure with a two pin and earth plug and socket complete with one MCB single pole 20 Amps 240 Volts all as specified and directed. MAKE: Havells Cat No. DCDPUSN020 or equivalent as specified herein after.

S & F in repairs control Gear housing complete of 150 Watt HPSV / MH finish LM6 aluminium alloy housing suitable for HPSV/MH flame proof fittings all as specified and directed. MAKE: Bajaj Cat No. BJFC 150 SV CA or equivalent as specified herein after.

S & F in repairs control Gear housing complete of 250 Watt HPSV / MH finish LM6 aluminium alloy housing suitable for HPSV/MH flame proof fittings all as specified and directed. MAKE: Bajaj Cat No. BJFC 250 MH/SV (LM6) or equivalent as specified herein after.

Supply and fix in repairs surface mounting front open type, luminaires suitable for CFL 2 x 11 Watt incl lamp ballast etc. all as specified and as directed. MAKE: Bajaj Cat No.BJSM 211 or equivalent in crompton greaves /phillips.

Supply & Fix in repairs Integral flame proof well glass luminaires surface mounting fittings 125 Watts all as specified and as directed. MAKE: Bajaj Cat No BJFW125 MV or equivalent as specified herein after.

Supply & Fix in repairs Integral safety Non integral flame proof well glass luminaires, epoxy finish LM6 aluminium alloy housing with heat resistant and glass cover surface mounting fittings suitable for 250/150 Watts MV/SV all as specified and as directed. MAKE: Bajaj Cat No.BJISW 250 MV/150 SV or equivalent as specified herein after.

Supply & Fix in repairs Flame proof bulk head luminaire, epoxy finish LM6 aluminium housing with heat resistant and toughened flat glass cover suitable for 150/200 Watts all as specified and as directed MAKE: Bajaj Cat No.BJFB 150/200 ES (LM6) or equivalent as specified herein after.

Supply & Fix in repairs Flame proof fluorescent luminaire, epoxy finish LM6 aluminium housing with heat resistant and toughened flat glass cover suitable for 1 x 36 Watts all as specified and as directed. MAKE: Bajaj Cat No.BJEXFTL 136 or equivalent as specified herein after.

Supply & Fix in repairs Flame proof fluorescent luminaire, epoxy finish LM6 aluminium housing with heat resistant and toughened flat glass cover suitable for 2 x 36 Watts all as specified and as directed. MAKE: Bajaj Cat No.BJEXFTL 236 or equivalent as specified herein after.

S & F in repairs MCB DB SPN, 8 way, 240 Volt, double door powder coated sheet steel enclosure for surface mounting fitted with 200 Amps bus bar and din channel complete all as specified and directed. MAKE: Havells/ Indo Asian/ Legrand or equivalent.

M & L for testing of resistence of earthpits of transformer, panels, buildings etc after testing report will be furnished to Engr-in Charge in standard format approved by Engr-in Charge.

M & L for earthing complete with galvanized steel earth electrode 60 cm x 60 cm x 6 mm thick buried directly in ground (earth pit not less than 2.25 m deep below ground level) with top edge of the plate not less than 1.5 m below normal ground level, connected to galvanized steel earth wire 4.0 mm dia by means of nuts, bolts, checknuts and washers of galvanized iron or steel as shown in electrical plate No 3 connected to earthing test point including testing on completion all as specified and directed. NOTE: The unit rate quoted shall be deemed to include for necessary excavation and earth work in any type of soil, PCC 1:3:6 type CI chamber, funnel with GI medium grade watering pipe 15 mm bore, RCC 1:2:4 type B1 in cover slabs 50 mm thick with 8 mm dia TMT bars @ 140 mm c/c both ways etc complete.

Taking down carefully existing building security light/ Industrial work shop high / mid bay luminaries of any type, at any height, rectifying the defects by repair /replacement of capacitor/ ballast/ igntor/ lamp and tightening the loose connection etc & refixing in position complete all as directed. NOTE: The unit rate quoted shall be deemed to be included the elements of labour only for rectifying and making the fitting and fixtures functional. If replacement of parts/items is required to make the fittings functional, the cost for labour and material for the same will be measured and paid for as "S&F in repairs" under relevant items of this schedule hereinafter and in such cases the above items will not be measured and paid for.

S & F in repairs LED 60 W edge series bldg security light fitting pressure die-cast housing with toughned glass and including LEDs with secondary optics and IP 66 protection complete all as specified and directed.

S & F in repairs LED 80 W industrial high bay luminaire IP65 protected LED midbay with PDC housing suitable for ceiling (surface/suspended) mount all as specified and directed. MAKE: Havells Cat No iliosBaYPlusHBP80Wled857sP90dtoPC or equivalent as mentioned in list of makes.

S & F in repairs ignitor for HPSV light fitting suitable for 150/250 Watt complete all as specified and directed.

S & F in repairs capacitor 10 mfd for HPMV light fitting suitable for 150/250 Watt complete all as specified and directed.

S & F in repairs capacitor 20 mfd for HPMV light fitting suitable for 250 Watt complete all as specified and directed.

S & F in repairs open construction heavy duty VPIT copper wound ballast for 250 watts HPSV/MH lamp complete all as specified and directed.

S & F in repairs open construction heavy duty VPIT copper wound ballast for 150 Watts HPSV/MH lamp complete all as specified and directed.

S & F in repairs SON-MH Tubular bulb/lamp suitable for 150 Watts HPSV/MH light fitting, including taking down existing bulb all as directed.

S & F in repairs lamp suitable for 250 Watts MV GES for HPMV light fitting, including taking down existing bulb all as directed.

M/S VERNEKAR AGENCIES

SIRI SALES AND SERVICES

JAI SHREE GOPAL ELECTRICALS

U k Enterprises

Bidder Name

JAI SHREE GOPAL ELECTRICALS

M/S VERNEKAR AGENCIES

SIRI SALES AND SERVICES

U k Enterprises

BROTECH