Loading…
India Infra Updates on WhatsApp
Join the Tenderkart WhatsApp channel for India Tender Updates
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹45.3 LAccepted-AOC | L1 | Accepted-AOC L1 | |
| 2 | L2₹47.9 L+₹2.4 L (5.22%)Rejected-AOC 728 1 JOGIWARA VISHAVKARMA MANDIR ROAD AMBALA CITY | AMBALA CITY | AMBALA | HARYANA | 134003 | L2 | Rejected-AOC L2 | |
| 3 | L3₹50.0 L+₹4.5 L (9.84%)Rejected-AOC | L3 | Rejected-AOC L3 |
Tender Value
₹48.2 L
EMD Value
₹96,340
Closing Date
26 Oct 2023, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
GE (AF) Hakimpet
Secunderabad
PROVISION OF CERTAIN MAJOR REVENUE AND MINOR WORKS AT AFS HAKIMPET UNDER GE (AF) HAKIMPET
2023_MES_621702_1
8580/E8
Open Tender
Civil Works
Item Rate
180 days
Hakimpet
As per NIT
8 documents required · 8 mandatory
₹500
GE (AF) Hakimpet
₹96,340
Yes
1 Dec 2023
5 Oct 2023
28 Oct 2023
5 Oct 2023
26 Oct 2023
12 Oct 2023
Amount
Surface excavation n.exc (not exceeding) 30 cm deep and averaging 15cm deep and getting out hard/dense soil
M & L Hardcore of gauge exc. 63mm, deposited, spread and levelled in layers n. exc 15cm thick, watered and rammed to a true surface complete all as specified.
Cement concrete type D-2, 1:4:8 (40mm graded aggregate) 100mm thick
M&L 50mm sand filling under floor all as specified and directed.
M&L Machine pressed precast conctete interlocking paver block with grey cement and colour pigment any shape and size confirming to IS 15658-2006 of 60 mm thickness, M-35 all as specified and directed.
M&L Providing, cement concrete in roof kerbs or mud stops, rounded 1:2:4 type B0 using 12.5mm graded stone aggregate or all as specified and directed.
Providing and laying at or near ground level factory made kerb stone of M-25 grade cement concrete in position to the required line, level and curvature, jointed with cement mortar 1:3 (1 cement: 3 coarse sand), including Excavation, RFR, making joints with or without grooves (thickness of joints except at sharp curve shall not to more than 5 mm), including making drainage opening wherever required complete.
Demolition of cement concerte in ground floors and paving n exc 15 cm thickness (below or above ground level )unreinforced concrete.
M&L 25mm thick Plain Cement concrete type B-0, 1:2:4 (12mm graded aggregate) Laid in sub flooring all as specified and directed by Engineer In charge.
M&L Virified Ceramic tiles 10 mm thick (square/ rectangular) polished, area of each tiles not exceeding 0.36 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match laid over and including 15 mm thick screed bed/bedding layer in CM (1:6) coloured tiles all as specified and as directed.
S&F false ceiling at all heights with semi perforated 12mm thick micro tegular edged GRG (Glass Fiber Reinforced Gypsum ) false ceiling tiles of size 595x595mm of approved texture, design and patterns having moisture content less than2%, humidity resistance of 99%, NRC 0.5-0.75 as per IS 8225:1987, Non combustable as per BS 476 (part 4 )-1970 and light reflectance 85% min to be laid in true horizontal level suspended on interlocking metal T-Grid of hot dipped galvanised iron section of 0.33mm thick (galvanised @120 grams per sqm including both sides) comprising of main -T runners of size 15 x 32 mm of length 3000mm, cross -T of size 15x32 mm of length1200mm and secondary intermediate cross-T of size 15x32 mm of length 600mm to form grid module of size 600 x 600 mm , suspended from ceiling using galvanised mild steel items ( galvanising @ 80 gms per sqm) i.e. 50mm long, 8 mm outer diameter M6 dash fasteners, 6mm dia fully threaded hanger rod upto 1000mm length and L-shape level adjuster of size 24x24x0.40mm of length 3000mm to be fixed on periphery wall/ partition with the help of plastic rawl plugs at 450 mm center to center and 40mm long dry wall SS screws all as specified and directed by Engr-in -charge.
Taking down Chowkhats or frames with shutters n exc 1.5 sq. m each
M&L Powder coated (minimum thickness of powder coating 50 micron)aluminium frame for doors, windows, ventilators, partitions with one or more rebates including joining cleat for fixing etc. complete all as specified
M&L Powdercoated aluminium window and ventilator shutters,sliding type without sash bars, aluminium sections weighing 0.55 kg/m including necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws, anodised aluminium fittings such as peg stays 150mm long (1 no.). hinges type B-21 100mm long (2 no.) suitable handle (1no.) complete all as specified
S&F Powder coated aluminium door shutters, aluminium section weighing 0.55 kg/ m including necessary joining cleats, glazing clips, ruber neoprene packing, handles 2 Nos in each door, hinges, anodised aluminum snap beading screws etc. complete all as specified
M&L Prelaminated particle board 12mm thick, interior grade, prelaminated on both sides side with decorative choice lamination fixed with screws to timber frame work
S&F 125 mm long Butt hinges, extruded aluminium alloy with galvanised mild steel hinge pin, anodised and fixed, type B-21 butt hinges for PVC door frame complete all as specified and as directed by the Engineer-in-Charge
S&F 200 mm size Alluminium, anodised barrel tower bolts of extruted section and fixed complete all as specified and as directed by the Engineer-in-Charge
S&F Door closer hydraulically regulated, designation No. 2, universal type, suitable for door shutters of 701 to 850 mm in width and of weight between 36 to 60 kg and fixed
Supply and fix 25 mm dia mild steel, chromium plated curtain rods with fixing brackets, stops, rollers etc.and taking down old pipe complete all as specified and as directed by the Engineer-in-Charge.
Taking down plaster including tiling on brick or stone walls, etc. including raking out joints, hacking for key, scrubbing down with water, etc. in cement lime or cement mortar including removing debris outside the MD land
M&L for rendering to brick masonry surfaces 15mm thick in cement mortar 1:6, complete all as specified and directed
M&L for complete removal of existing treatment on walls
M&L for 2 coats of Oil bound distempering over a coat of primer over 3mm thick wall putty with white or tinted on walls complete all as specified and as direcetd.
Removing demolished material / rubbish exc.1.50km and depositing wheredirected at a level n exc 5 km above the starting point
S&F for 9 feet pulley operated cloths drying system consisting of aluminium pipe of outer dia 22mm, inner dia 19.8mm, pulleys madeup of delrin with rope guide mounted on channel pair of length 24 feet (distance betwwen two pipes is adjustable) locking system to hide rope knot, channel to be mounted or fixed with self tapping screws provided in kit. Rope will be HDPE double core of 4 mm dia, fixing to ceiling as specified and directed by engineer in charge and minimum weight of one pipe shall not be less than 0.2 kg/m,minimum weight of rope shall not be less than 7700gms/ unit (for 4 pipes). Make : Easy dry or equivalent.
Material and labour for for Non-skid ceramic coloured tiles 7 to 8 mm thick (square/rectangular) area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match laid over and including 15 mm thick screed bed/bedding layer in CM (1:6) complete all as specified and as direcetd.
Material and labour for for digital coloured glazed ceramic tiles of sizes 300m x 450 mm X 7 mm thick jointed in neat cement slurry, laid over including 10 mm thick rendering coat/backing layer in CM (1:4) and pointed in white or coloured cement to match the shade of tile as in vertical surfaces such as dado/skirting complete all as specified and as direcetd.
S & F in repair for vitreous china, half stall urinal white with union and grating for discharge pipe (excluding flushing cistern, flush pipe and waste pipe) incl. providing anf fixing plugs, securing urinal to plugs with and incl, 60 mm long brass screws, pointing around urinal back in cement mortar 1:2 (excl fixing supply pipe to flushing cistern, trap and waste pipe) complete all as specified and as directed
S & F Urinal spreader of PTMT any colour for fixing with 15 mm dia pipe. (Minimum weight 60gms)
S&F in repair vitreous China wash down water closet pan (pedestal pattern) white,incl. trap, connection to drain and flushing pipe including seat cover for pedstal pan complete.
S&F in repairs 10 litre capacity PVC low level flushing cistern with all accessories complete fixed with WC including syphone pipe, PVC flushing pipe of size complete all as specified and directed.
S&F in repair angle valves 15 mm bore fancy type, chromium plated, screwed down, high pressure with crutch or butterfly handle screwed both ends for iron pipe or for unions all as specified and directed.
S&F Two way taps 15 mm bore fancy type, chromium plated, screwed down, high pressure with crutch screwed both ends for iron pipe or for unions all as specified and directed.
S&F 15 mm bore fancy type health faucet with SS hose complete all as specified.
S&F Tubular towel rail, 20mmdia, D type, 60cm long between flanges all as specified and directed.
S&F in repair 15 mm bore pillar taps cast copper alloy,with capstan heads,chromium plated,screwed down, fancy type high pressure complete all as specified and as direcetd.
Supply and fix 15 mm bore LDPE pipe 45cm long with brass nuts and washers on both ends all as in repairs specified and directed.
Supply and fix 30 mm dia bore waste fittings brass chromium plated fixed to wash hand basin/urinals with long screwed shanks and fly nuts flange and bedded in run lead cement and other end fixed complete
Demolition of Brickwork or stone/boulder masonry built in cement mortar or cement lime mortarincluding all quoins, arches, pillars, etc, but excluding ashlar facings, dressed stonework and precast concrete articles
Brickwork with fly ash bricks, straight or curved on plain exc 6m mean radius, built in cemrent mortar 1:4 complete all as specified and as direcetd.
Brickwork with fly ash bricks, straight or curved on plan to any radius in half brick thick walls, built in cemrent mortar 1:4 complete all as specified and as direcetd.
M&L for rendering to brick masonry or stone surfaces 15mm thick in cement mortar 1:4, to be finished even and smooth (without using extra cement complete all as specified and directed
M&L 3 coats of white wash on newly plastered surfaces of walls complete all as specified and as direcetd.
M&L 2 coats of white wash on surfaces of ceiling complete all as specified and as direcetd.
Taking down Chowkhats or frames with shutters exc 1.5 sq. m but n exc 4 sq. m each complete all as specified and as direcetd.
Supply and fix solid PVC door frame of size 50 mm x 47mm made out of 5mm plain colour PVC sheet reinforced with MS square tube supplying and fixing in opening as per specification complete all as specified and as directed by the Engineer-in-Charge
Supply and fix Factory Made Solid PVC Moulded Door Shutter, 28 to 30mm thick (stiles), with 2, 4, or 6 raised panel design with 2mm thick Moulded Prelam PVC Sheet on the front face & 2mm prelam PVC Sheet on back face, supplying & fixing in frame at site as per specification & drawingcomplete all as specified and as directed by the Engineer-in-Charge
S&F 100 mm long Butt hinges, extruded aluminium alloy with galvanised mild steel hinge pin, anodised and fixed, type B-21 butt hinges for PVC door frame complete all as specified and as directed by the Engineer-in-Charge
Supply and fix 150 mm size Alluminium, anodised barrel tower bolts of extruted section and fixed complete all as specified and as directed by the Engineer-in-Charge
Supply and fix 125 mm size extruded aluminium door handles fabricated type complete all as specified and as directed by the Engineer-in-Charge
Taking down steel tubing and connections 15 mm bore, including cleaning for refixing or removal to store all as specified and directed.
Taking down steel tubing and connections 20 mm bore, including cleaning for refixing or removal to store all as specified and directed
Taking down steel tubing and connections 25 mm bore, including cleaning for refixing or removal to store all as specified and directed
Supplying and laying 16mm bore of CPVC pipes with SDR 13.5 pipes & plain CPVC SDR 11 fittings fixed complete to walls, ceilings or in floors etc. in repairs including concealed piping after cutting in brick work/ stone masonry walls where ever required complete all as specified and directed.
All as per item above but 20mm bore.
All as per item above but 25mm bore.
S & F in repair 1000 Ltrs capacity Rotational moulded, polythene water storage tanks (cylindrical shape with vertical top closed) hoisted and fixed in position all as specified and directed.
S&F 20 mm bore dia ball valves, high pressure of PTMT with epoxy coated aluminium rod & high dencity plasstic ball screwed for iron pipe and fixed .(minimum weight 15 mm-142gms/20mm-210gms) all as specified and directed.
S&F in repairs Gun-metal, globe or gate valves, with iron wheel head, screwed both ends for 20 mm bore pipe all as specified and directed.
S&F PVC (SWR)110mm dia pipes single socketed, in any length with rubber ring joints, laid in trenches or in floors complete all as specified and as direcetd.
S&F PVC (SWR) bends of 110mm bore complete all as specified and as direcetd.
S&F PVC (SWR) floor trap of 75mm, plain with grating including jointing with solvent cement complete all as specified and as direcetd.
Supply and fixing factory made uPVC white colour fixed glazed window/ventilator made of (small series) frame 47 x 50 mm mullion 47 x 68 mm both having wall thickness of 1.9 ± 0.2 mm and single glazing bead of appropriate dimension (Area upto 0.75 sqm.) comprising of uPVC multi-chambered frame andmullion (where ever required) extruded profiles duly reinforced with 1.60 ± 0.2 mm thick galvanized mild steel section made from roll forming process of required length (shape & size according to uPVC profile), uPVC extruded glazing beads of appropriate dimension, EPDM gasket, G.I. fasteners 100 x 8 mm size for fixing frame to finished wall, plastic packers, plastic caps and necessary stainless steel screws etc. Profile of frame shall be mitred cut and fusion welded at all corners, mullion (if required) shall be also fusion welded including drilling of holes for fixing hardware's and drainage of water etc. After fixing frame the gap between frame and adjacent finished wall shall be filled with weather proof silicon sealant over backer rod of required size and of approved quality, all complete as per approved drawing & direction of Engineer-in Charge. (Glass shall be paidseparately).
S&F Powder coated aluminium frame for doors, windows, ventilators with one or more rebates including joining cleat for fixing etc. complete all as specified
Supply and fix 5.5mm thick plain sheet glass glazing any size with rubber packing where ever required complete all as specified.
Removing demolished material / rubbishexc.1.50km and depositing wheredirected at a level n exc 5 km above the starting point
S&F 304 grade SS sinks with drainage board made of stainless steel 1.00mm thick kitchen or laboratory with plugs, washers and wastes; including bedding in cement mortar to dwarf wall or including fixing cantilever brackets and connecting union to pipe overall size 915mm x 460mmbowl size 410mm x 330mm x160mm including taking down old sinkscomplete all as specified and as direcetd.
S&F in repair 15 mm bore fancy type long body Bib tap crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule and fixed complete all as specified and as direcetd.
Excavation in post holes each n.exc 0.50 cum getting out. Returning filling in layers n.exc 25cm etc removal at surplus soil to a distance n.exc 50 mt and making good surface in hard/ dense soil
M&L Plain cement concrete 1:3:6 type C-2 (using 40mm graded crushed stone aggregate) laid in base, mass concrete all as specified and directed by Engineer In charge.
M&L 100mm thick Plain Cement concrete type C-2, 1:3:6 (40mm graded aggregate) Laid in flooring as specified and directed by Engineer In charge.
M&L 75mm thick Plain Cement concrete type B-1, 1:2:4 (20mm graded aggregate) Laid in base of flooring as specified and directed by Engineer In charge.
S&F Steel work as in tubular / L post trusses,plates, purlins including special shaped washers etc, complete using ERW or induction butt welded tubes conforming to IS 1161-1998 grade St 240 complete all as specified.
M&L for two coats of synthetic enamil paint over a coat of red oxide zinc chrome on new surfaces of any description complete all as specified.
S&F Pre- painted galvalume aluminum zinc coating GI based corrugated/semi corrugated steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws as specified complete all as specified.
S&F Pre-painted galvalume aluminum zinc coating GI based Plain steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws as specified
S&F mild steel work as in Joist, channel, angle, or tee sections,fixed independently of grade Fe 410-W(Gde-E- 250)quality-A, without connecting plates, etc. (cut to ordinary lengths complete all as specified and directed by engineer in charge.
S&F Framed work as in doors or gates of angle or other section with gusset plates, rails, braces, etc., complete, drilled for fixing of steel sheeting or other covering. Doors, etc. to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings (exclusive of steel sheeting or other covering, running rails and guides) and hanging; also fastening and fixing complete all as specified and directed by engineer in charge.
S&F Wire netting(mesh size 25mm) of stainless steel wire 1.4mm dia fixed with tinned tacks of stainless steel wire staples complete all as specified and directed by engineer in charge
M&L for two coats of synthetic enamil paint over a coat of red oxide zinc chrome on new surfaces of any description complete all as specified.
Cutting holes into or through brick walls built in cement mortar or cement lime mortar Superficial area Exc. 150 sq. cm but n exc 400 sq. cm and depth n.exc 23 cm and making good in cement mortar 1:3 or cement concrete 1:2:4 type B-l as required complete all as specified and directed by engineer in charge.
M&L for PCC 1:2:4 type B-0 mix (using 12 mm graded stone aggregate) for back filling of hold fasts to wall
M&L for rendering to brick masonry or stone surfaces 15mm thick in cement mortar 1:4, to be finished even and smooth (without using extra cement complete all as specified and directed
M&L for rendering 10mm thick on fair faces of concretein ceiling in cement mortar 1:4, to be finished even and smooth (without using extra cement complete all as specified and directed
S & F in repair for vitreous china, half stall urinal white with union and grating for discharge pipe (excluding flushing cistern, flush pipe and waste pipe) incl. providing anf fixing plugs, securing urinal to plugs with and incl, 60 mm long brass screws, pointing around urinal back in cement mortar 1:2 (excl fixing supply pipe to flushing cistern, trap and waste pipe) complete all as specified and as directed
S&F in repair vitreous China wash hand basin white, flat back,size 580X450 mm including cutting for pinning in ends of brackets,complete.
Supply and fix Grating doom 125 mm dia with waste hole of PTMT (Minimum weight 40gms) and fixed in repairs all as specified and as directed.
S&F PVC (SWR)75mm dia pipes single socketed, in any length with rubber ring joints, laid in trenches or in floors complete all as specified and as direcetd.
M&L for rendering to brick masonry or stone surfaces 15mm thick in cement mortar 1:4, to be finished even and smooth (without using extra cement complete all as specified and directed
S&F Bib tap fancy type of PTMT any colour high pressure screwed for iron pipe and fixed. (Minimum weight 15mm-90gms/20mm- 125gms).
Stop valve of PTMT any colour high pressure screwed for iron pipe and fixed. (Minimum weight 15mm-90gms/ 20mm- 92gms)
Swivel shower of PTMT any colour forfixing with 15mm pipe. (Minimum weight40gms)
Roughening surfaces of old concrete floor by picking sweeping clean and washing down with water to remove dust etc complete and Brushing neat cement slurry with 3 kg of cement per sqm complete all as specified and as directed by Engineer in Charge
M&L cement concrete type B-0 1:2:4 using (12.5mm graded agg averaging 40mm thick) complete all as specified and as directed by Engineer in Charge
M&L for 10mm thick rendering on fair faces of brick work (or) concrete surfaces in CM 1:3 mixing water proofing compound at 2% by weight of cement (but excluding the cost of WPC) finishing the surface even and smooth without using extra cement complete all as specified and as directed.
Supply only liquid water proofing compound.
M&L for cleaning the roof, plastered surfaces and applying evenly a priming coat of bitumen primer at the rate of 0.3 ltr per sq.mand providing APP based polymeric modified water proofing membrane minimum weighing 3kg/Sqm and minimum 3mm thick reinforced with polyster non woven fabric (wt. not less than 150 gms/Sqm) laid on primed surface by forced application and applying two coats of solar reflective bituminous aluminium paint @ 0.1 ltr/Sqm per each coat complete all as specified and directed.
M&L for rendering 10mm thick on fair faces of concrete in ceiling in cement mortar 1:4, to be finished even and smooth (without using extra cement complete all as specified and directed
S&F PVC (SWR)75mm dia pipes single socketed, in any length with rubber ring joints, laid in trenches or in floors complete all as specified and as direcetd.
Excavating in trenches, not exceeding 1.5m wide and not exceeding 1.5m in depth for foundation, etc, or for shafts, wells, cesspits, manholes, pier holes, etc. not exceeding 10 sqm on plan and not exceeding 1.5m in depth and getting out in hard/dense soil, complete all as specified and directed.
ditto all as per item but above depth exc 1.5 m and n.exc 3 mtr
Cement concrete 1:4:8 Type D2 (40 mm graded aggregate) in foundations, filling and mass concrete complete all as specified and directed.
Cement concrete type C2 1:3:6 (Using 40mm graded aggregate) in foundation, fillings & mass concrete complete all as specified and directed.
M&L Concrete bed to drain pipes including packing under, and haunching against the sides of pipes after they are laid and tested
M&L for reinforced concrete pipes, class NP3 150mm size, laid and jointed complete with collars, complete all as specified and directed
M&L Brickwork with fly ash bricks, straight or curved on plain exc 6m mean radius, built in cemrent mortar 1:4 complete all as specified and directed
Returning, filling in, including spreadin, levelling, watering and well ramming in layers not exceeding 25 cm in hard/ dence soil, complete all as specified and directed.
Removing excavated soild to a distance not exceeding 50 m and deposited where directed at a level not exceeding 1.5 km above the starting point, complete all as specified and directed.
M & L Rendering 15mm thick in CM 1:4 mixed with 2% WPC on fair faces of brick work or concrete surfaces on walls finished even and smooth without using extra cement.. etc complete all as specified and as directed
M & L Extra for forming fair finished drain or channel 30 cm inner girth in cement concrete, using extra cement, including forms, moulds, mitred/stopped ends etc.
M&L for Mild steel bars 10mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified and directed.
M & L Mild steel work as in handles of man hole cover slabs, rungs of man holes, straps and similar articles confirming to FE-290 Gde E-165 etc complete all as specified and as directed
M&L for providing precast cement concrete 1:2:4 type B1 using 20mm graded stone aggregate as in landings, cover slabs (for man holes etc.) chullah hoods, chajjas, water troughs, mangers, shelves and similar articles with plain faces set in CM 1:6 including all necessary form work, complete all as specified and directed.
M & L PCC 1:2:4 type B0 (12.5 mm graded stone aggregate) as in coping including necessary formwork etc complete all as specified and as directed
S&F Bird proofing mesh made of 'Antibird net UV black in colour made of material polyolefin all weather proof co- polymer of machine knotting using CNC machines with DSLS technology for anti slip knotting , heat setting should be steam set for greater dimensional stability and knot firmness and diameter of the twine is 1mm and the size of mesh 25mm X 25mm (+/- 2mm) and should achieve twine breaking strength of 16 kgf minimum and MBS (mesh breaking strength) 12 kgf and KBS ( Knot breaking strength) 22 kgf minimum fixed complete all as per manufacturers instruction and as directed. Note:- Bird proofing arrangement shall be carried out in ceiling and entrance door pully based with suitable dia nylon rope for ups and down pulling type all as per existing type. The pullys shall be fixed at height of above 10 mtr all as directed and as per manufacturer's instructions including removing existing net if present and also include scaffolding ladder safety arrangement etc all as specified. Note: Pully shall be measured seperately. Make: LEO Technova India or as approved by GE.
Supply only MS pulley heavy grade of 100 mm dia
Supply and fix Pressed steel frames125 x 60mm for doors with one or more rebates including necessary fixing lugs, hinges, lock strike plate, etc., complete, as specified
Supply and fix Flush shutterssingle leaf/ double leaf,30mm thck solid core construction, with block board core and both sides face is covered with decorative face veneer with lipping/frame to match complete all as specified and as direcetd.
S&F 120 mm long Butt hinges, heavy weight, cold rolled mild steel, and fixed, for flush pressed steel door frame complete all as specified and as directed by the Engineer-in-Charge
Supply and fix 200 mm size Mild steel barrel tower bolts, stove enamelled black, with bright bolt and fixed complete all as specified and as directed by the Engineer-in-Charge
Supply and fix 150 mm size extruded aluminium door handles fabricated type complete all as specified and as directed by the Engineer-in-Charge
200mm long Aluminium alloy, anodised,sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast-aluminium alloy and fixed complete all as specified and as direcetd.
Supply and fix mild steel helical door spring rat tail rod model including roller plate complete 300 mm long complete all as specified and as directed by the Engineer-in-Charge.
S&F 110mm bore PVC (SWR) vent cowl
Material and labour for Demolition of Brickwork or stone/ boulder masonry, built in cement mortar, manholes including all quoins, arches, pillars, etc, but excluding ashlar facings, dressed stonework and precast concrete articles complete all as directed by Engineer in charge.
S&F Framed work as in doors or gates of angle or other section with gusset plates, rails, braces, etc., complete, drilled for fixing of steel sheeting or other covering. Doors, etc. to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings (exclusive of steel sheeting or other covering, running rails and guides) and hanging; also fastening and fixing complete all as specified and directed by engineer in charge.
M&L for two coats of synthetic enamil paint over a coat of red oxide zinc chrome on new surfaces of any description complete all as specified.
M&L for PCC 1:2:4 type B-0 mix (using 12 mm graded stone aggregate) for back filling of hold fasts to wall
S&F 250mm long Mild steel sliding door bolts, plate type, stove enamelled black, with bright bolt not less than 12mm dia with and including a minimum of 6 bolts and nuts, four on bolt plate and two on staple plate and fixed
S&F 375mm long Mild steel skeleton tower bolts with steel sheet pressed plate and staple stove enamelled black, and mild steel bright bolt and fixed
M&L for RCC 1:2:4 type B-1 (using 20mm graded aggregate) asin retaining wall,drains and the like of any thickness complete all as specified and as directed
M&L TMT bars 10 mm dia and over ,cut to length bent to shape required incl cranking, bending, spirally hooping for columns and binding with MS wire (annealed) not less than 0.90mm dia wire etc complete.
Form work to sides of concrete footings plinth beams and similar work etc with rough finished surfaces all as specified.
Plastering 15 mm thick on fair faces of brick work or concrete surfaces in CM 1:4 on walls finished even & Smooth w/o using extra cement
Returning, filling in, including spreading, levelling, watering and well ramming in layers not exc 25 cm
M&L 150 mm thick Cement concrete type B-2, 1:2:4 using 40mm graded stone aggregate as in floor laid in bays all as specified and directed.
Forming conntraction(Dummy)joints 65mm deepx10mm wide filling with sealing compound grade B complete all as specified and directed.
Supply and fix MCB distribution board double door type, TPN 4 way, 415 Volts sheet steel powder painted IP 43 protection with bus bar, neutral link & earth bar etc. for incoming and outgoing MCBs
Supply and fix MCB distribution board double door type, SPN 12 way, 240 Volts sheet steel powder painted IP 43 protection with bus bar, neutral link & earth bar etc. for incoming and outgoing MCBs.
Supply and fixing, TPN 40 to 100 Amps current rating, 415 Volts, 10 KA 'C' curve MCBs in the MCB DB complete with connection, testing and commissioning.
Supply and fixing, SPN 40 to 63 Amps current rating, 240 Volts, 10 KA 'C' curve MCBs in the MCB DB complete with connection, testing and commissioning.
Supply and fixing, SP 6 to 32 Amps current rating, 240 Volts, 10 KA 'C' curve MCBs in the MCB DB complete with connection, testing and commissioning.
Supply and fix MCB distribution board double door type, SPN 8 way, 240 Volts sheet steel powder painted IP 43 protection with bus bar, neutral link & earth bar etc. for incoming RCBO and outgoing MCBs
M&L for point wiring with 1.5 sq.mm FRLS insulated multistranded copper conductor, 1100 volts grade single core PVC insulated and unsheathed cable drawn through new consealed PVC conduit of suitable size but not less than 20 mm dia in consealed of stone/concrete wall /roof etc all as per site requirement including FRLS,PVC insulated and unsheathed cable with copper conductor cable of size 1.50 sqmm as earth conductor as per proper colour coding and pressed steel terminal boxes made out of 1.6 mm thick MS sheet with sink into the wall for mounting, 60 mm deep covered including laminated sheet, required sizes switch modular covers or 3 mm thick laminated hylam sheet fixed with cadmium plated screws/ PVC gang box fully enclosed type for mounting switches, sockets, fan regulator, etc including making good the disturbed surfaces of walls and paint tuch up to match with the existing surfaces as per site requirement complete all as specified and directed by Engineer-in-Charge.
a) One light point controlled by one switch.
b) One 3 pin 6 Amps socket point controlled by one switch on same board.
c) One 3 pin 6 Amps socket point controlled by one switch on independent board.
d) One ceiling fan point controlled by one switch and regulator.
All as per item above here-in-before but with 2.5 Sqmm for 3 pin 16 Amps socket point controlled by one switch on independent board and 2.5 Sqmm copper conductor green in colour as earth continuity conductor complete all as specified and directed by Engineer-in-Charge.
S&F in replacement of switch Modular type single pole one way 6 Amps 240 volts complete all as specified and as directed.
S&F in replacement of socket 2 in 1, 3 pin 6 Amps, modular type, universal ,240 volts complete all as specified and as directed
S&F in replacement of switch Modular type single pole one way 16 Amps 240 volts complete all as specified and as directed.
S&F in replacement of socket 2 in 1, 3 pin 6/16 Amps, modular type, universal ,240 volts complete all as specified and as directed
S&F in replacement of stepped type electronic fan regulator 100 Watt, 240 Volt, 50 Hz 2 module size in 5 steps modular type complete all as specified and directed.
S&F in replacement of ceiling rose 6 A, 3 plate,PVC/ polycarbonate, insulated body 240 Volt , 50 Hz all as specified and as directed.
Supply & fixing in replacement of high efficacy recess luminaire suitable for armstrong/grid ceiling with high brightness LEDs and PMMA extrured diffuser giving glare free light and good aesthetic appeal 35/36 W LED (2ft X 2ft) complete with all accessories including connecting up with three core twisted flexible copper conductor cable with suitable size complete all as specified and directed by Engineer-in-Charge. Make :- Havells/CG/Bajaj/Philips.
Disconnecting and removing ceiling fan of any sweep any height from electrical connection bringing down, dismantling, cleaning internally and externally thoroughly examine replacement of split pins, cotter pins, down rod of suitable size and check nuts etc overhauling, lubricating with approved lubricants, reassembling, including replacement of wornout/defective parts, refixing in original position including minor repairs for the smooth functioning and provision of new flexible wire of size 23/0.0076 multistranded copper conductor cable from ceiling rose to fan including painting of ceiling fan complete with synthetic enamel paint by spraying including filling cavities with filler , one coat after cleaning all dust etc & testing complete all as specified.
Supply and fix sheet metal powder painted double pole enclosure with a two pin and earth plug and socket flushing in wall including 32 Amps rated double pole MCB 10 KA, "C" curve complete all as specified and directed by Engineer-in-Charge.
Supply and install hi wall split units indoor /outdoor complete with cordless remote control unit and with inbuilt with air ioniser on lasma filter for better indoor air quality with min. 5 star rating and EER 3.2 of capacity of 2 Ton capacity complete all as specified and directed.
M& L for Wiring for submain wiring alongwith with the 2 X 4 Sqmm + 1 x 4 Sqmm earth wire of FR PVC insulated copper conductor single core cable in surface / recess in PVC Casing capping etc. complete all as specified and directed.
Supply and fixing AC Voltage stablizer of capacity 4 KVA with input vol;t 190 to 210 Volts and output 200- 240 Volts +/- 2 % varition comprising voltmeter fuse unit socket connected lead etc with time dealy system complete all as specified and as directed.
M&L for submain wiring alongwith earth wire with 4 x 6.0 Sqmm + 1 x 6.0 Sqmm FRLS PVC insulated, unsheathed, multistranded, 1100 Volts grade copper conductor cable single core, drawn through and including PVC Conduit and its all accessories of suitable size on wall/roof surfaces complete all as specified and directed by Engineer-in-Charge. Note: Four runs of 6.0 Sqmm, one run of 6.0 Sqmm copper cable and one run of PVC conduit shall be measured as one unit length.
M&L for Maintenance free earthing all as per following specification :- Make: Marconite/ DEHN/JEF TECHNO/Pragati Electrocom (a) Copper bonded rod with Low carbon steel, high tensile strength copper bonded rod with min 250 microns of copper plating, UL listed. Diameter- 17.2 mm, Length- 3 meters, Material- Copper Bonded, Coating thickness- 250 microns, min, Approvals- Tested acc. IEC / EN 62561-2, UL 467.
(b) 20 kg backfilled compound, - Material Carbon based backfill/earthing compound, Fulgurite formation test at direct lightning (10/350 μm), lightning long duration test at- 100C No fulgurites/Pass, Environmentally Friendly ROHS certified, Resistivity- < 0.12 ΩM, Complying Standard- IEC 62561-7 , Testing Approvals Certified from- NABL accredited Laboratories. (c) SS 316 grade Termination clamp to terminate the load on earth electrode for termination, Material of construction-316 grade stainless steel, Dimension-160x35x3 mm Note : Quoted rate includes testing of earthings and earth results should be less than 1 Ohm. The contractor will be responsible to submitt the result sheets to the department along with the locations.
Material and Labour for earthing pit display boards made out of 3mm thick MS sheet of size 30 x 35cm welded to 75cm long 25 x 25 x 5 mm thick MS angle iron grouted in PCC 1:3:6 (with 20mm stone aggregate) to a depth of 20 cm and applying two coats of synthetic enamel paint of approved color over a coat of red oxide primer and writing the letters on plate for showing the following details: 1. EARTHING PIT NO: 2. DATE OF MEASUREMENT: 3. NEXT DUE DATE: 4. STANDARD VALUE: 5. VALUE OBTAINE: 6. MEASURED BY: 7. SUPERVISED BY : Note : Shape, size and colour of display board should be approved by Engr in Charge before fixing at site.
Supply and fixing of wall mounted fans 400mm sweep copper motor of 60 watt, 240 Volts including all connection accessories all as specified and directed by Engineer-in-Charge. Model AIRSTREAM of Bajaj or equivalent in Havells/CG/Usha.
Taking down copper/ aluminum point wiring (light, fan, socket or power) complete, including fixtures and fittings such as switches, ceiling roses, pendants, regulators, sockets, lamp holders, light fittings etc removing materials for taking credit and making good disturbed surfaces of walls, floors etc. including paint tuch up to match with the existing surface as per site requirement complete all as specified and directed by Engr-in-Charge.
Taking down existing unserviceable distribution board with MCBs, switch fuse unit, enclosureand making good the disturbed surface of walls including paint touchup to match with the existing surfaces complete all as specified and as directed by the Engineer in charge.
Taking down Existing old UNSV submain wiring of any description /type size and removal of UNSV material from site and making good the disturbed surface of walls / ceiling so as to match with the existing finishes all as specified and as directed by the Engineer -in- charge .
Saiansh Associates
SN POWER TECH
stage.html
html • 0.05 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .