Mugaiyur/Arumalai/PtOffice

Amount

Construction of Panchayat Office Building @ Near Keelakondur Road In Arumalai Panchayat

Earthwork excavation for cut opening the tank bund with iniial lead of 10m and lift of 2m in hard stiff clay , stiff black cotton soil, hard red earh, shales, murams,gravel, stoney earth and earth mixed with small sized boulders including refilling etc. complete.

Cement Concrete 1:4:8 mix using 40 mm HBG metal for foundaion including watering wherever necessary and laid in layers of not more than 15cm thick. Compacting etc., complete complying with standard specifications and as directed.

ReFilling in Basement with Excavated Earth in Layers of not more than 15 cm thick , well watered,rammed and consolidated complying with standard specification etc complete .

Supplying and Filling in Basement with Gravel in layers not more than 15 cm thick , well ramed and consolidated complying with standard specification

Supplying and filling in foundation and basement with good sand in layers not more 15 cm thick including ramming, watering and compacting etc.complete complying to standard specification

Supplying and Fabricating and placing in position MS Steel or ribbed for steel for all reinforced cement concrete works as per the design given including cost of steel and blinding wire all floors etc., complete complying with standard specification.

Colums Below GL

Column above G.L.

Lintel

Reinforced cement concrete 1:1.5:3 using 20mm iss HBG metal including the cost and conveyance of all meterials and cost of all labour charges etc complete

Brick work in CM 1:5 mix using country bricks ground moulded of size 23 x 11 x 7 Cm for the following including curing etc., complete complying with standard specifications.

Brick jelly lime concrete using 20mm brick jelly with slacked lime in the ratioof 32:12.5 including cost and conveyance of all materials to site and all labourcharges for mixing , laying ,and finishing etc complete

Terrace flooring with one course of pressed tiles size of 20 x 20 x 2cm using CM1:3 mixed with crude oil 10% by weight of cement and pointed with cement mortor 1:3 over one coarse of Brick jelly lime concrete of 75mm average thick etc., complete

Plastering cm 1;5 -12mm Thick including the cost and conveyance of all materials and cost of all labour charges etc., complete.

Plastering cm 1;3 -20mm Thick including the cost and conveyance of all materials and cost of all labour charges etc., complete.

Supplying and applying of two coats of putty of 3mm thick over the exposed RCC surface of ceiling including finishing the joints smoothy with grinding machine and the surface shall be thoroughly cleaned out of dust and scrubbing. The Surface shall then be allowed to dry for atleast 48 hours. It shall then be sand papered (waterproof abrasive sheet) to give a smooth and even surface. Any unevenness shall be made good by applying 1st coat of putty mixed with water on the entire surface including filling up the undulations and applying 2nd coat of putty after 6 hours of 1st coat of putty and then sand papering (waterproof abrasive sheet) the same after it is dry and finishing the surface smoothly, etc., complete complying with standard specifications and as directed by the Departmental Officers. [ The rates are inclusive of hire charges for grinding machine with wheel, cost of sand paper (waterproof abrasive sheet), cost of putty blade, labour charges for grinding the joints and sand papering, two coat of putty, scrapping the putty area to level the surface smooth, etc., complete]. The Putty shoule be got approved by the Executive Engineer before use on work.

Dadooing the walls with glazed tiles including the cost and conveyance of all materials and cost of all labour charges etc., complete

Supply of Mild Steel Door of size 1.10 m x 2.10 m with Two leaf. Outer frame o f40 x 40 x 6 mm equal MS Angle , Shutter frame made of 35 x325 x 5 mm equal MS Angle for horizontal and vertical members and the shutter frame strengthened by stiffners of one horizontal for each shutter using MS Plate of size 20 x 5 mm fully covered with 18 Gauge plain MS full sheet welded with shutter frame neatly and also fixin by welding ,Tower Bolts 30 cm long , Butt Hinges two nos of locking handles fixing the shutter including painting the whole unit with one coat of best quality red oxide Primer .

Supply of Mild Steel Door of size 1.00 m x 1.80 m with Two leaf. Outer frame o f40 x 40 x 6 mm equal MS Angle , Shutter frame made of 35 x325 x 5 mm equal MS Angle for horizontal and vertical members and the shutter frame strengthened by stiffners of one horizontal for each shutter using MS Plate of size 20 x 5 mm fully covered with 18 Gauge plain MS full sheet welded with shutter frame neatly and also fixin by welding ,Tower Bolts 30 cm long , Butt Hinges two nos of locking handles fixing the shutter including painting the whole unit with one coat of best quality red oxide Primer .

Supply of Mild Steel Door of size 0.75 m x 2.10 m with Two leaf. Outer frame o f40 x 40 x 6 mm equal MS Angle , Shutter frame made of 35 x325 x 5 mm equal MS Angle for horizontal and vertical members and the shutter frame strengthened by stiffners of one horizontal for each shutter using MS Plate of size 20 x 5 mm fully covered with 18 Gauge plain MS full sheet welded with shutter frame neatly and also fixin by welding ,Tower Bolts 30 cm long , Butt Hinges two nos of locking handles fixing the shutter including painting the whole unit with one coat of best quality red oxide Primer .

Supply of Mild Steel Window of size 1.20 m x 1.30 m with Two leaf. Outer frame of 35 x 35 x 5 mm equal MS Angle , Mullion section made of 35 x 35 x 5 mm equal Tee section , Shutter frame made of 25 x 25 x 5 mm equal MS Angle for horizontal and vertical members and the shutter frame strengthened by stiffners of one horizontal for each shutter using MS Plate of size 20 x 5 mm fully covered with 18 Gauge plain MS full sheet welded with shutter frame neatly and also fixin by welding , protective grill with 12 mm square M S rods at an interval of not greater than 10 cm centre to centre to the outer frame , two nos peg stays with hole for keeping the windows open in different positions , two nos of locking handles fixing the shutter with four nos of hinges hold fasts , six nos of hinges with outter frame of the window including painting the whole unit with one coat of best quality red oxide Primer .

Supply of Mild Steel Window of size 1.50 m x 1.30 m with Three leaf. Outer frame of 35 x 35 x 5 mm equal MS Angle , Mullion section made of 35 x 35 x 5 mm equal Tee section , Shutter frame made of 25 x 25 x 5 mm equal MS Angle for horizontal and vertical members and the shutter frame strengthened by stiffners of one horizontal for each shutter using MS Plate of size 20 x 5 mm fully covered with 18 Gauge plain MS full sheet welded with shutter frame neatly and also fixin by welding , protective grill with 12 mm square M S rods at an interval of not greater than 10 cm centre to centre to the outer frame , two nos peg stays with hole for keeping the windows open in different positions , two nos of locking handles fixing the shutter with four nos of hinges hold fasts , six nos of hinges with outter frame of the window including painting the whole unit with one coat of best quality red oxide Primer .

Supply of Rolling Shutter of size 1.20 m x 2.10 m with frame and locking arrangements etc complete

Supply and fabrication of Steel Grill Gate of over all size of 1.50 m x 2.10 m using structural steel etc complete in all respects as directed

Supply of RCC JOLLY of size 0.90 m x 0.45 m etc complete

Supply and Fixing of Rcc Jolly of size 0.60 m x 0.45 m including cost and labour charges etc complete

Fixing charges for Steel Door in position etc complete

Fixing charges for Steel Window in position etc complete

Fixing charges for Jolly in position etc complete

Fixing charges for Steel Grill gate in position etc complete

Paving the Wall and Floor with Best Quality Vetrified Tiles of size 60 cm x 60 cm any approved colour and size shape and quality laid in Cement mortor 1 : 3 to 20 mm thick in all floors and the Top Pointed with the white cement 0.40 kg mixed with the same colouring Pigments etc complete

Providing Floor in Fully Polished KOTTA Stone of size 600 mm x 600 mm x 20 mm laid over base layer of cement mortor 1 : 3 ,20 mm thick and applying cement slurry and pointed with white cement and colour pigments to the colour of stones and polished neatly as directed .

Providing Gronolothick Floor Finish in Cement Concrete 1 ; 2 : 4 mix by using 10 - 12 mm iss hbg chips including cost and conveyance of all materials and labour charges etc complete

Distembering Two Coats with best approved Oil Bound Distember including cost of Painting with Primer Coat over new plastered surface and conveyance of all materils to site and all labour charges etc complete

Painting Two Coats with approved Exterior Emulsion over one coat of Primer Coat over plastered wall surface , ceiling and other new surface including cleaning , preparing the surface,curing,scaffolding charges etc, complete.

Painting Two Coats over Iron work including cost of paint and Labour charges etc complete

Providing and fixing PVC. RainWater Downfall pipes of size 110 mm diametre with necessary shoes,bends and other specials, clamps,screws,nailsteakwood plugs etc complete including cost of all materials. The rate include cost of removable cast iron Gratings of appropriate size.The size of Teak wood plugs to be used is 150 mm x 25 mm in front and 200 mm x 75 mm in rear and all other sides with a depth of 100 mm . The pipe is to be fixed by means of U clamps at the centre of the pipe to be fixed in addition to these for more than three metres pipie length , complete complying with standard specification

Suppling and fixing in position of Indian Water Closet Coloured of size 580 mm x 440 mm , white Glazed earthen ware of approved quality with P trap or S trap confirming to is:2556 - Part XII with sand cushion and forming the closet using 40mm broken jelly lime concrete etc complete, complete

Suppling and fixing in position of European Water Closet Coloured with " P " or " S " Trap with Double Flapped seat and seat cover with Brass Hinges and 10 Litre capacity PVC Low level Flushing Tank with all internal fittings of size 580 mm x 440 mm , white Glazed earthen ware of approved quality with P trap or S trap confirming to is:2556 - Part XII with sand cushion and forming the closet using 40mm broken jelly lime concrete etc complete

Supply and Fixing of Coloured Wash Hand Basin with Pedestal of Size 550 mm x 400 mm with all accessories such as cast iron Brackets , 32 mm dia CP Waste coupling , rubber plug and chain , 32 mm dia " B " Class G I waste pipe, 15 mm dia GM wheel valve , 15 mm dia nylon connection , 15 mm dia brass nipples , 15 mm CP . Pillar Tap etc complete .

Hand Rails Stainless Steel by Manufacturing , Suppying and Fixing of Stailess Steel Hand Rails for staircase near wet riser using 50 mm dia 304 L Grade Stainless Steel pipe of 1.60 mm thick will be provided with Tubular supports made of 304 L Grade Stainless Steel pipe of 25 mm dia of 1.60 mm thick welded to the railing. The supports will be grouted into the wall and provided with 93 mm thick Stainless Steel Circular base plate of 304 Grade . the rate shall included for Grouting into concrete with necessary supporting arrangements the Hand Rail in Floor polishing buffing ,bonding , cutting , grinding , conveyance welding charges , electrical charges etc complete .

Wiring with 2 x 1.50 sqm ( 22/0.3 ) PVC insulated SC unsheathedCu Conductor of 1100 v Grade in suitable PVC Rigid Pipe Concealed in wall and ceiling with PVC accesseries,in flush with wall , with TW box 150 mm x 100 mm x 113 mm TW Switch box with 3 mm thick Hylem sheet cover for 5 A 3 Pin non inter locking CS plug with painting of suitable colour with contionues earth wire connection of 14 SWG TC Wire and making good of the concealed portion with suitable colour for Concealed Plug Point SD No 38 for PVC PLUG Point

Wiring with 2 x 1.50 sqm ( 22/0.3 ) PVC insulated unsheathed single core Copper Conductor of 1100 v Grade in suitable PVC Rigid Pipe concealed in wall and ceiling with PVC accesseries with TW Switch box with 5 A F . T . Switch and making good of the concealed portion with suitable colour for PVC Concealed Light Point and Fan Point S D N o 16

Supply and Fixing of fancy glass shade and 11 W CFL in the existing light point SDnO 80

Supply and fixing of 32 A DPIC Switch of 500 v with F & N ( Side Handle ) on suitable T W Box with PWD Earthing ( S D N o 143 )

Supply and Run of 2 of 6 sqmm ( 84 / 0.3 ) PVC insulated single core unsheathed Copper Conductor of 1100 v Grade on 7 / 20 G I Bearer wire for Service Connection Mains ( S D No 66 )

Supply and Run of 2 of 6 sqmm ( 84 / 0.3 ) PVC insulated single core unsheathed Copper Conductor of 1100 v Grade in 25 mm dia G I suitable Pipe B class suitably bended both ends with necessery angle iron upright and end support For Mains ( S D N 71 )

Supply and Fuixing of Water TIGHT Bulk Head fitting with Guard suitable for 11 w lamp with CFL SD No 83

Supply and fixing of 1200 mm ( 48" ) A C Ceiling Fan complete with stepped eloctronic 300 w regulator with 1.00 meter down Rod on the existing clamp S D N o 107

Supply and fixing of TNEB meter Board suitable for 32 A Single Phase SC . With 32 A Fuse Unit etc complete . SD No 125

Provision for EB Deposit charges

Provision for Lock and Key

Provision of water supply arrangments

Provision for Name Board

GST Amount for providing Service to Government Contract Works for the above Construction Works. { GST Amount is the Total GST Amount for total overall quoted amount above this row in column "BB" for all works in this package}

A Sarathi (BID ID -1556085)