Loading
Loading…
Loading…
| # | Company | Quoted % | Amount | Rank | Status |
|---|---|---|---|---|---|
| 1 | L1₹17.6 LAdmitted-Finance | +0.00% | ₹17.6 L | L1 | Admitted-Finance |
Tender Value
₹17.6 L
EMD Value
₹35,254
Closing Date
7 Aug 2026, 11:00 amClosed
Executive Engineer
Office of Executive Engineer, Div IV, PWD Tonca
Supply and installation of floor mounted Centrifugal Fan and Fresh Air System for kitchen exhaust system at Goa Niwas, Delhi
2026_PWD_30837_1
31/1/2026-27/ASW-IV/EMN/PWD/23 LINE02
Open Tender
Electrical Works
Percentage
15 days
Tonca Caranzalem
Please refer to tender notice
3 documents required · 3 mandatory
₹5,000
₹35,254
10 Aug 2026
3 Aug 2026
7 Aug 2026
3 Aug 2026
7 Aug 2026
3 Aug 2026
This is a percentage-rate BOQ. The schedule below shows estimated quantities and rates. Bidders quote a single percentage above or below the total estimated cost.
| Sl No | Description | Qty | Unit | Est. Rate | Est. Amount |
|---|---|---|---|---|---|
| 1 | Supply, Installation, Testing and Commissioning of approved make fan section for extract air complete with FLOOR MOUNTED forward / backward curved DIDW Centrifugal Fan, MS base frame,TEFC squirrel cage induction motor, drive package and vibration isolation arrangement including spring isolators, rubber grommets etc. Fan section casing shall be fabricated out of minimum 16 G GS sheet as specified. Fan shall be suitable for operation on 415/230 ± 10% volts, 50 Hz , 3/1 phase AC power supply. Fan motor for kitchen fan shall be enclosed in GI sheet enclosure in hot air stream free area. Fan outlet velocity shall not exceed 2000 FPM(10.1 MPS). Extract fan section shall be suitable for floor installation as shown in the design drawings. Fan sections shall be provided with canopy.The extract fan section shall include necessary electrical panel with starter (if required) and power cabling along with earthing upto 10 RMT . Fan make Adventek/Edgetech Air Systems/TechnoVel/VTS The fan characteristics shall be as follows : 6500 cfm, 50 mmwg total static pressure floor mounted Exhaust air fan. | 1 | Nos. | 3,57,215 | ₹3,57,215 |
| 2 | Supply, Installation, Testing and Commissioning of approved make fan section for extract air complete with FLOOR MOUNTED forward / backward curved DIDW Centrifugal Fan, MS base frame,TEFC squirrel cage induction motor, drive package and vibration isolation arrangement including spring isolators, rubber grommets etc. Fan section casing shall be fabricated out of minimum 16 G GS sheet as specified. Fan shall be suitable for operation on 415/230 ± 10% volts, 50 Hz , 3/1 phase AC power supply. Fan motor for kitchen fan shall be enclosed in GI sheet enclosure in hot air stream free area. Fan outlet velocity shall not exceed 2000 FPM(10.1 MPS). Extract fan section shall be suitable for floor installation as shown in the design drawings. Fan sections shall be provided with canopy.The extract fan section shall include necessary electrical panel with starter (if required) and power cabling along with earthing upto 10 RMT . Fan make Adventek/Edgetech Air Systems/TechnoVel/VTS The fan characteristics shall be as follows : 6000 cfm, 50 mmwg total static pressure floor mounted Fresh air fan with 10 micro fiber Holding BOX | 1 | Nos. | 3,35,030 | ₹3,35,030 |
| 3 | Providing and fixing of Sheet Metal Ducting :- Rectangular ducting – Factory Fabricated complete with splitter dampers, turning vanes, access doors, supports, air tight joints applied with sealant etc. as per drawings ( Make for GI Sheet :- TATA /JSW/ Sail ). 20 G | 142 | Sqm | 3,630 | ₹5,15,460 |
| 4 | Providing and fixing of Sheet Metal Ducting :- Rectangular ducting – Factory Fabricated complete with splitter dampers, turning vanes, access doors, supports, air tight joints applied with sealant etc. as per drawings ( Make for GI Sheet :- TATA /JSW/ Sail ). 22 G | 57 | Sqm | 3,250 | ₹1,85,250 |
| 5 | Supply and fixing of air / Return air Aluminium extruded Powder Coated liner Grille of sizes 100 / 150/ 200 mm with end flanges Make : Cosmos / Air FlowProducts / Air Master / Airflow / Ajantha / Air mech Eqv. | 4 | Sqm | 25,630 | ₹1,02,520 |
| 6 | Supply and fixing of Volume Control Dampers | 1 | Sqm | 16,880 | ₹16,880 |
| 7 | Supply and fixing of Fresh air intake connections with rain protection louvers, bird screen & volume control damper gear operated type. | 1 | Nos. | 13,130 | ₹13,130 |
| 8 | Supply and fixing of additional MS supports for fans & scrubber | 1 | lot | 2,37,190 | ₹2,37,190 |
stage.html
html • 0.03 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Tendernotice_1.pdf
PDF • 0.34 MB
Tendernotice_2.pdf
PDF • 7.69 MB
BOQ_31242.xls
BOQ • 0.34 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .