CA NO GE/H-44/2021-22 REPAIR/REPLACEMENT OF FLOOR TILING WALL TILLING ROOF CHAJJAS AND CERTAIN MISC REPAIR WORKS OF MAIN BLDG AT AHRR UNDER GE E/M RR HOSP AT DELHI CANTT-10

Amount

Dismantling of floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises complete all as specified and directed by Engr-in-Charge

Demolition of wall and ceiling boards of any description, any thicknes including cover fillets and frame work complete all as specified and directed by Engr-in-Charge

Dismantling of boarding any description, fixed in any position with nails complete all as specified and directed by Engr-in-Charge

Dismantling Asbestos cement (corrugated, semi-corrugated etc.) sheets in roof covering.complete all as specified and directed by Engr-in-Charge

S&F prepainted galvalume aluminium zinc coating GI based corrugated steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws complete all as specified and directed by Engr-in-Charge

M&L 20mm thick screed bed or bedding layer of mortar in CM 1:6 for laying floor finishes complete all as specified complete all as specified and directed by Engr-in-Charge

M & L for Double charge/ultra charge virified tiles 10 mm thick (square/ rectangular) polished, area of each tiles exceeding 0.36 sqm, but not exc 0.42 sqm in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to matchc , set and jointed complete all as specified and directed by Engr-in-Charge

All as item No 07 above but in dado/skirting.

M&L for 10 mm thick rendering in CM 1:4 on brick work or concrte surfaces walls for fixing of tiles complete all as specified and directed by Engr-in-Charge

M&L for glazed ceramic colour tiles in vertical surface of size 450 X 300 x 7 mm thick, pointed in white or coloured cement to match complete all as specified and directed by Engr-in-Charge

M & L Non skid coloured ceramic tiles 7-8 mm thick (square or rectangular) area of each tiles exc 0.06 sqm but n exc 0.11 sqm, in floors etc. set and jointed in neat cement slurry and pointed in coloured cement to match complete all as specified and directed by Engr-in-Charge

M & L for 18 to 20mm thick granite of any type (table rubbed & polished) in jambs, pillars, window cills, plate forms in CM (1:4) including pointing in white cement (1:2) ,using marble dust with admixture of pigment to match with shade of granite complete all as specified and directed by Engr-in-Charge.

M&L for exposed GI frame/grid system duly powder coated for module size of 600 x 600 mm suitable for lay-in aluminium / mineral fibre ceiling tiles, having main T runner of 24 mm size, suspended at 1200mm C/C and cross T runner of 24 mm size, suspended at 600mm C/C with interlocking arrangements to form grid of 600 x 600mm, perimeter runner/channel of 15 mm size, main and cross T runner supported by 4mm dia GI rod from slab / Roof, wall angle etc with and including all fixing accessories and making good of distrubed wall surfaces with POP and one coat of oil emulsion distemper, as required to match the existing surfaces, complete all as specified and directed by Engr-in-Charge.

M&L for metal false ceiling, lay-in type, 0.5 mm thick, having tegular edge profile, duly powder coated, perforated type with glass fibre acoustic fleece, suitable for false ceiling grid/frame module of 600 x 600mm size, complete all as specified and directed by Engr-in-Charge. (Note : The grid /frame shall be measured and paid for separetly.)

Supply & fixing of false ceiling in step (s) comprising of 12 mm thick Gypsum board including GI frame work for seamless ceiling made of GI perimeter channel 0.55 mm thick with two unequal flanges of 20 and 30 mm and web of 27 mm fixed to surrounding wall using nylon sleeves and screws at 450 mm centre to centre/ intermediate channel 0.9 mm thick having two equal flanges of 15 mm each and web of 45 mm suspended from soffit at approx 900 mm centre to centre with GI cleat and steel expansion fasteners with and including ceiling section (not exc 1.2 M length) of 0.55 mm thickness having kurled web of 50 mm and flange of 26 mm each with lips of 10.5 mm fixed to the intermediate channel with connecting clips across the intermediate channel at 457 mm centre to centre including two coats of plastic emulsion paint complete all as specified and directed by Engr-in-Charge

S & F solid PVC wall panelling consisting of 5mm thick wood grain finish PVC sheet inclusive of solvent cement and fixing at site on PVC frame as per specifications and drawing complete all as specified and directed by Engr-in-Charge

S & F for 5mm thick PVC sheet fillet of width 35mm for wall paneling inclusive of fixing on to wall to make PVC Frame as per complete all as specified and directed by Engr-in-Charge

S & F solid PVC leeping of 2mm thick wood grain finish PVC sheet is heat bent as lipping on the edges of doors, windows & other edges inclusive of solvent cement and fixing at site complete all as specified and directed by Engr-in-Charge.

S&F PVC 18/19mm thick PVC moulded solid board ,one side prelaminated for cabinets boxes shutters,etc with shelf and shutters full size fitted under/above kitchen cooking platform and other platform complete all as direction of the Engr-in charge and the manufacturer complete all as specified and directed by Engr-in-Charge

S&F soft closing clip on hinge, full / half overlay type, of stainless steel,complete all as specified and directed by Engr-in-Charge

S&F in repair 100 mm size stainless steel handles, matt finish, complete all as specified and directed by Engr-in-Charge.

S&F brass two levers keys,Locks, cupboard,grade I, size 50 mm suitable for cup board door/drawer , complete all as specified and directed by Engr-in-Charge

Taking down of shutter of any description exc 1.0 sqm but n exc 2.00 Sqm each.complete all as specified and directed by Engr-in-Charge

Taking down of shutter of any description exc 2.00 Sqm each.complete all as specified and directed by Engr-in-Charge

Taking down chowkhat or frames with shutter (without taking off shutter from frame) area n exc 1.50 Sqm.complete all as specified and directed by Engr-in-Charge

Taking down chowkhat or frames with shutter (without taking off shutter from frame) area exc 1.50 Sqm but n .exc 4.00 sqm each complete all as specified and directed by Engr-in-Charge

S & F Solar control film 25micron reflective type sticked to glass panes as per instruction of manufacturers complete all as specified and directed by Engr-in-Charge.

S & F in repair stainless steel curtain rod 25mm dia of make VISTA or eqv. including brackets, side knobs fixed to wall complete all as specified and directed by Engr-in-Charge.

M/L 35mm thick 1st class hard wood factory made Glazed and skelton shutter, open rebated and prepared to receive glass, gauge etc. (without sash bars) edges of framing plain, chamfered or rounded, fitted with cut and mitred beads for securing glass etc. sizes of members of shutters as specified in SSR Part-I Section-8 clause 8.23(a) complete all as specified and directed by Engr-in-Charge.

M&L for preparation of new wooden surfaces of any description over 10 cm width or girth, applying two coats of synthetic eanmel paint over a coat of pink primer.complete all as specified and directed by Engr-in-Charge.

M&L MS framed work for door frame (chowkhats) of angle or other section etc Fe 410-W complete for fixing of door shutters all as directed.( Note:- Door shutter shall be measured and paid for seperately)complete all as specified and directed by Engr-in-Charge.

Material and labour for preparation of new steel surfaces of any description over 10 cm width or girth and applying two coats of synthetic enamel paint over a coat of red oxide complete all as specified and directed by Engr-in-Charge

S&F Stainless Steel but hinges 100mm size complete all as specified and directed by Engr-in-Charge.

S&F 300mm long aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet,cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast aluminium complete all as specified and directed by Engr-in-Charge.

S&F aluminium anodised barrel tower bolt 200mm long extruded section all complete all as specified and directed by Engr-in-Charge

S&F 150mm size extruded aluminium handles fabricated type anodised complete all as specified and directed by Engr-in-Charge.

S & F for Collapsible steel gates, top hung, consisting for channel pickets, pivoted flat bars, top and bottom runners, brass handles etc., as specified, erected in position and securing runners with holdfasts and brackets, complete all as specified and directed by Engr-in-Charge

S & F in repair 1mm thick Steel rolling shutters, with out ball bearing, as specified including top cover, anchoring rod, hasp and staple and one shop coat of primer; erected in position as indicated, complete; push pull or manual type complete all as specified and directed by Engr-in-Charge

Demolition of Reinforced Cement concrete in roofs, floors (other than ground floors), beams, staircases, landing, chajjas and similar suspended work complete all as specified and directed by Engr-in-Charge

M & L for RCC type B1 1 : 2 : 4 (using 20mm graged stone agg) work cover slabs (for manholes etc.) chullah hoods, chajjas, water troughs, mangers, shelves and similar articles with plain fair finishes complete all as specified and directed by Engr-in-Charge

M & L for Mild steel TMT bars 10 mm dia., and over cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, Chajjas hooking ends and binding with mild steel wire (annealed) not less than 0.9 mm dia., or securing with clips complete all as specified and directed by Engr-in-Charge

M & L for Mild steel TMT bars 5 mm to 10 mm dia., cut to length, bent to shape required, in stirrups, spacers and binders and binding with mild steel wire (annealed) not less than 0.9 mm dia., or securing with clips.complete all as specified and directed by Engr-in-Charge

Fair finished flat form work to Chajjas, water troughs and similar items including edges complete all as specified and directed by Engr-in-Charge

Fair finished flat form work to sides and soffits of floor or roof beams, lintels, cantilevers, shelves including supports etc.complete all as specified and directed by Engr-in-Charge

S&F aluminium powder coated glazed window of frame 125 x 38 x 1.6mm fixed type window using insulated glass harmetically sealed with 6mm SGU titanium blue cool lite STB 120 toughened glass of approved manufacture colour and shade (glazing shall comply with single glass of U-value 5.3w/sqm k, solat factor 0.33, reflectance 19%)+12mm dry air cavity+5mm clear float glass all seperated by a hollow aluminium spacer bar with twin lines of micro hole as approved filled with molecular dissicant of approved make and using primary hot melt butly and secondry polysulphide or silicon sealant of approved make complete all as specified and directed by Engr-in-Charge.

S&F, aluminium powder coated chowkhats of 100x44x1.5mm section with rebate complete frame complete all as specified and directed by Engr-in-Charge

Supply, fabricating and fixing of aluminium door shutter powder coated of extrusion aluminium section, Vertical style of door shutter of size 85mmx44.45mmx1.5mm thick. Top, middle and bottom rail of size 85mmx44.45x1.5mm thick and fixing plain/tinted sheet glass or ACP sheet with aluminium beading and rubber gasket/beading as directed One mortice lock for aluminium door (each), and three nos aluminium hinges of size 100mm of and two aluminium tower bolts of 250mm size and 02 nos american type hinges of size 250mm for each door fixed with rawl plug including rectification of floor/wall to match the existing surfaces complete all as specified and directed by Engr-in-Charge at site. (Cost of sheet glass Plain/frosted/ACP Sheet shall be measured and paid seprately )

M&L for 5.5 mm thick plain glass fixed with beading in aluminium frame complete all as specified and directed by Engr-in-Charge

S&F 5mm thick aluminium composite panel (ACP Sheet) including necessary clips, rubber packing & aluminium beading (aluminium frame ) complete all as specified and directed by Engr-in-Charge.

S&F in replacement toughened glass frameless door with fixed portion, of 12 mm thickness, including cutting holes, edges rounded and etching works etc and all kind of SS patch fitting & fixture, spider patch etc, (excluding handle, lock and floor spring) complete all as specified and directed by Engr-in-Charge.

S&F of stainless steel handle 600 mm long fixed to 12 mm thick toughned glass door with and including all fixing accessories i. e. bolt washer, adhesive etc, complete all as specified and directed by Engr-in-Charge

S&F of SS door lock, glass to glass type, suitable for 12 mm thick frameless toughned glass door with and incl all fixing accessories i. e. bolt, washer, screw, adhesive etc of suitable size,complete all as specified and directed by Engr-in-Charge.

S&F in repair for Double action floor spring hydraulically regulated made up of minimum 1.25 mm thick aluminium alloy sheet foundation box,main body with stainless steel cover, governing pivot made of brass, other parts made of mild steel heavy duty and fixed, complete all as specified and directed by Engr-in-Charge.

S & F in repair door closer, Aluminium (die cast) body,hydraulically regulated, designation No. 3, unversal type suitable for door shutters of 851 to 1000mm in width and of weight between 61 to 80 Kg complete all as specified and directed by Engr-in-Charge.

S&F aluminium partition wall of aluminium section 100mm x 44mm x 1.5mm thick frame rectangular section and panel of PVC sheet or prelaminated board in bottom panel and 5.5mm thick sheet glass in top panel with rubber lining and aluminium beading around length including necessary fixing arrangement for bottom and top member of aluminium frame in floor/PCC/Brick work as per site requirement with rawl plug etc, including chromium plated steel screws 60cm centre to centre complete all as specified and directed by Engr-in-Charge (Note : Cost of PVC panel or prelaminated board and sheet glass shall deemed to be included in the rate quoted for this item )

S&F of venatian blinds vertical type 100mm wide slats made out of fabric cloth of approved shade fixed as per the instructions of manufacturers, complete all as specified and directed by Engr-in-Charge .

S & F 1mm thick of Stainless steel sheet of (Gd-304) with & including SS screws / fasteners etc and all kind of machine works i.e. cutting, welding, bending, moulding, etc to get the required shape and size and fixed to any position and at any surface etc, complete all as specified and directed by Engr-in-Charge.

S & F of SS (Gd-304) framed work of angles, hollow tubes (squre/rectangular), flats etc of any shape and size and all kind of machine works i.e. cutting, welding, bending, moulding, grinding, polishing, buffing etc to get the required shape and size, fixed to any position and at any surface with fastners/screw etc, complete all as specified and directed by Engr-in-Charge

S & F 160mm dia PVC (SWR) pipes single socketed, in any length with rubber ring joints, laid in trenches or in floors complete all as specified and directed by Engr-in-Charge.

Demolition of brick work built in cement mortar including all quoins, arches, pillars, drain and culvert in foul condition etc.complete all as specified and directed by Engr-in-Charge

M&L for brick work with sub class B bricks, straight or curved on plan exc 6 m mean radius built in CM 1:6 complete all as specified and directed by Engr-in-Charge.

Taking down cement plaster on brick or stone walls including racking out joints, hacking for key scrubbing down with water etc.complete all as specified and directed by Engr-in-Charge

M&L for 15 mm thick rendering of ready mix mortar having ratio equivalent to CM 1:6 on brick work or concrete surfaces of wall and finished the surfaces even and smooth as a whole or in patch work all as specified and directed by Engr in charge. Note: White cement shall be used as per site requirement complete all as specified and directed by Engr-in-Charge.

Preparing new plaster surface prepation of old wall surface and over a coat of primer and applying two coats of distemper oil emulsion on surface of walls surface complete all as specified and directed by Engr-in-Charge

M&L for applying two coat of oil bound distemper with roller on old wall surface over a coat of primer, complete all as specified and directed by Engr-in-Charge

Dismantling of bricks (laid flat or on edge) or brick tiles in floors, channels, kerbs, aprons etc. including working in foul position.complete all as specified and directed by Engr-in-Charge

Demolition of mud/mud phuska in roofs any thickness, including plastering and leaping if any and cleaning the roof surfaces with wire brushes complete all as specified and directed by Engr-in-Charge.

M&L, Priming roof surfaces and applying water proofing treatment over roofs comprising of the following complete all as specified & as directed:- (a) Applying oil bound bituminous primer at the rate of 0.4 Ltrs/Sqm as per IS 3384-1986 on prepared surfaces. Surface shall be kept free till the moment, the primer is impregnated and the solvent oil in primer is evaporated. (b) Applying one coat of hot straight run bitumen @ 1.20 Kg/Sqm of grade 30/40 confirming to IS-73 (Grade S-35). (c) Laying 3mm thick APP polymeric water proofing membrane of weight not less than 3.6 kg/sqm, black finish reinforced with non woven polyster matt, with a thermo fusible finish, torching overlaps with a propane or a butane gas torch, with a overlap of 75mm at sides and 100mm at the ends and sealing including applying a coat of cold emulsion bituminous primer all as per manufacturer's instruction including preparation of surface. (d) Applying one coat of hot straight run bitumen grade 30/40 (Grade S-35) conforming to IS-73 @ 1.20 kg/Sqm. Make: "Moply FP" manufactured by STP Texsa Ltd or Hyper Plas (Polyester) manufactured by M/S IWL Ltd or "Shaliplas"ter) manufactured by M/S Capital Steels and Chemical Pvt Ltd or Makpolyplast manufactured by M/S M K Patro as approved by GE. Note :- The water proofing treatment shall be got carried out by the manufacturer or their authorised applicators. The contractor shall give 10 years guarantee for effectivenss of water proofing treatment, 2.5% of work done amount of this item shall be retained from contractors payment for a period of 10 years reckoned from date of physical completion of this work, or inlieu contractor may deposit bank FDR for the said amount for 10 years which shall be released by GE on expiry of satisfactory completion of 10 years period.complete all as specified and directed by Engr-in-Charge.

M&L cement concrete 1:2:4 type B1 using 20 mm graded aggregates as in roof padding complete all as specified and directed by Engr-in-Charge

M&L for cement concrete tiles 25cm x 25cm x 22mm thick, machine pressed; set jointed and pointed in neat cement slurry in roof with grey cement and no pigment, complete all as specified and directed by Engr-in-Charge.

Shivam Firetech Engineers

CHAUHAN ENTERPRISES

SANJEEV ENTERPRISES

SAWARIYA ENGINEERS AND CONTRACTORS

ACR ENTERPRISES

friends associeates