CLEANING / DUSTING OF UNDERGROUND WATER STORAGE SUMPS/ TANKS INCLUDING REPLACEMENT OF CONTROL VALVES, PRIMPING TANKS, AUTO VALVES AND CHLORINATION AT VARIOUS PUMP HOUSES INSTALLED AT ARMY AREA COLABA, MUMBAI

Amount

Cleaning of underground sump of capacity 2 lakh gallon to 3 lakh gallong, cleaning the floors, wall and ceiling portion of sump etc by Mechnical high pressure spray and steel wire brush or broom brush to remove Algae/dirt/foreign dirt completely and soaking out the water/dirt with a high pressure wet vaccum pump and removing spoils out side of MD land land distance exc 5 KMs & n.exc 10 KMs and applying spray of approved chemical etc. complete all as specified and as directed by Engineer-in-charge . Note :- Rates deemed to be included for pumping out water left below foot valve.

All as per item No 1 above but capacity of 0.5 LG to 1 LG

All as per item No 1 above but capacity less than 0.5 LG

All as per item No 1 above but for RCC OHT of capacity 3000 ltrs to 5000 ltrs

M & L for cleaning of PVC service tank of capacity 250 ltrs & less than 500 ltrs, cleaning the floors, wall and celiling portion of sump etc by mechanical high pressure spray and broom brush to remove algae/dirt/foreign dirt etc completely and soaking out the water/dirt with a high pressure wet vaccum pump and removing spoild out side of MD land and applying spray of approved chemical (bleaching containt at lease 6-8 % chlorine contant) inside the tank complete all as specified and directed.

All as per item No 5 above but capacity of 500 ltrs & less than1000 ltrs.

All as per item No 5 above but capacity of 1000 ltrs & not exc 2000 ltrs.

All as per item No 5 above but capacity of 3000 ltrs & not exc 5000 ltrs. Note for item No 1 to 8 :- Quoted rates shall be deemed to be inclusive of marking painting with two coats of synthetic enamel paint, black colour of size 500x100 cm on UG sump and 30x50 cm(on RCC/PVC service tank) including writing following in white synthetic enamel paint letters not exceeding 80 mm in width all as specified & directed: - (a) Size of sump/Tank (b) Capacity of sump/tanks in Gallons (c) Date of cleaning (d) Due date of cleaning

Cleaning the vegetation including glass, bushes small trees and all vegetation growth complete including digging out the root of bushes and small trees around the Water Supply installation/sump/OH reservoir, valve chamber etc. filling the rough holes with earth and levelling the surfaces by removing all debris outside MD land complete all as specified and directed.

S & F CI cover (weight not less than 22-23 kg) for PVC water storage tank and accessory complete for closing and locking arrangement suitable for 3000 to 5000 ltrs capacity including covering the overflow pipe with GI wire mess as approved by BMC complete all as specified and directed Make :- KFAI/ NFL.

All as per item No. 10 above but for PVC water tanks of 1000/2000 ltrs capacity (weight not less than 16-18 kg) Make :- KFAI/ NFL.

All as per item No. 10 above but for PVC water tanks upto 500 ltrs capacity (weight not less than 14 kg) Make :- KFAI/ NFL.

S & F in repair 5000 ltr capacity rotational moulded polyethelene water storage tank (cynlindrical) vertical with closed top) double layered, white colour (inside & outside of tank), hoisted and fixed in position including float valve of suitable size complete all as specified and directed. Make: Sintex / Polycon / Plasto / Infra as approved by GE.

S & F in repair 4000 ltr capacity rotational moulded polyethelene water storage tank (cynlindrical) vertical with closed top) double layered, white colour (inside & outside of tank), hoisted and fixed in position including float valve of suitable size complete all as specified and directed. Make: Sintex / Polycon / Plasto / Infra as approved by GE.

S & F in repair 2000 ltr capacity rotational moulded polyethelene water storage tank (cynlindrical) vertical with closed top) double layered, white colour (inside & outside of tank), hoisted and fixed in position including float valve of suitable size complete all as specified and directed. Make: Sintex / Polycon / Plasto / Infra as approved by GE.

S & F in repair 1000 ltr capacity rotational moulded polyethelene water storage tank (cylindrical vertical with closed top) double layered, white colour (inside & outside of tank), hoisted and fixed in position including float valve of suitable size complete all as specified and directed. Make: Sintex / Polycon / Plasto / Infra as approved by GE.

S & F in repair 500 ltr capacity rotational moulded polyethelene water storage tank (cynlindrical) vertical with closed top) double layered, white colour (inside & outside of tank), hoisted and fixed in position including float valve of suitable size complete all as specified and directed. Make: Sintex / Polycon / Plasto / Infra as approved by GE.

S & F in repair sluice valves of size 150 mm bore flanged end, cast iron body, flanged and drilled and non rising type stainless steel spindle with nut, long body, class PN 1.6, conforming to IS 14846 of 2000 including all flange joint with rubber or fiber board, bolts, nuts and washers complete all as specified and directed. Make:- Kirloskar/ Kartar/ Upadhyaya/ Leader as approved by GE.

All as specified in item No 18 above but of size 100 mm bore

All as specified in item No 18 above but of size 80 mm bore

Dismantaling wrought iron or mild steel work of any description not otherwise provided for complete all as specified and directed.

Mild Steel Plates (plain or chequered) channels of Fe 410-W (Gde-E-250) quality A, square cut or notched (ordinary and counter sunk) forming holes, without any attachment, including preparation of surfaces and applying two coats of synthetic enamel paint over a coat of red oxide primer, material and labour complete all as specified and directed.

Joist channel, angle or tee section of Fe 410-W (Gde-E-250) quality A, fixed independently, without connecting plates, etc, (cut to ordinary lengths i.e within 20 mm of the length, including preparation of surfaces and applying two coats of synthetic enamel paint over a coat of red oxide primer, material and labour complete all as specified and directed.

Demolition of cement concrete of any description and in any position not otherwise specifically provided for complete all as specified and directed.

M & L for plain cement concrete 1:2:4, type B-2 (using 40 mm graded stone aggregate) as in support of CI pipes, foundation and hardstanding finishing even and fair without using extra cement all as specified and directed.

M & L for 60mm thick, coloured interlocking paver tiles/blocks, lacquer finish of any size having compressive strength of 35 N/Squmm, in flooring with grey cement and pigment tested as per IS-15658-2006 with and including laying over 30 mm thick sand bed compacted with vibrator complete as specified and directed.

M & L for sand filling under floors or in foundations including watering and consolidation complete as specified and directed.

Supply and fix in repair/replacement of Butterfly valve conforming to IS-13095: 1991, CI body, PN 1.6, ISI marked, flanged ends for 50mm bore pipe fixed with GI nuts, bolts, washers, rubber gasket etc complete as specified and directed. Make:- Kirloskar/ Kartar/ Upadhyaya / Leader as approved by GE.

Supply and fix in repair/replacement of Butterfly valve conforming to IS-13095: 1991, CI body, PN 1.6, ISI marked, flanged ends for 80mm bore pipe fixed with GI nuts, bolts, washers, rubber gasket etc complete as specified and directed. Make:- Kirloskar/ Kartar/ Upadhyaya / Leader as approved by GE.

Supply and fix in repair/replacement of Butterfly valve conforming to IS-13095: 1991, CI body, PN 1.6, ISI marked, flanged ends for 100mm bore pipe fixed with GI nuts, bolts, washers, rubber gasket etc complete as specified and directed. Make:- Kirloskar/ Kartar/ Upadhyaya / Leader as approved by GE.

Supply and fix in repair/replacement of Butterfly valve conforming to IS-13095: 1991, CI body, PN 1.6, ISI marked, flanged ends for 150mm bore pipe fixed with GI nuts, bolts, washers, rubber gasket etc complete as specified and directed. Make:- Kirloskar/ Kartar/ Upadhyaya/ Leader as approved by GE.

siddharth and company

Bidder Name

Anil Industrial Corporation

siddharth and company