Loading…
India Infra Updates on WhatsApp
Join the Tenderkart WhatsApp channel for India Tender Updates
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹22.0 LAccepted-AOC H NO 279 SHAHEED NAGAR AGRA | AGRA | L1 | Accepted-AOC Lowest Bidder | |
| 2 | L2₹25.6 L+₹3.4 L (15.3%)Rejected-Finance | L2 | Rejected-Finance Not Lowest | |
| 3 | L3₹26.3 L+₹4.1 L (18.5%)Rejected-Finance 37 222 BUNDU KATRA AGRA UP | AGRA | UP | L3 | Rejected-Finance Not Lowest | |
| 4 | L4₹26.6 L+₹4.4 L (19.9%)Rejected-Finance | L4 | Rejected-Finance Not Lowest | |
| 5 | L5₹26.8 L+₹4.6 L (20.6%)Rejected-Finance | L5 | Rejected-Finance Not Lowest |
Tender Value
₹40 L
EMD Value
₹80,000
Closing Date
15 Jul 2023, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
GE Bharatpur
Kanjoli line Bharatpur
Comprehensive repair for day to day work and periodical services to certain bldgs at Sewar fort under GE Bharatpur
2023_MES_601815_1
8252/E8
Open Tender
Civil Works
Item Rate
180 days
GE Bharatpur
As per NIT
6 documents required · 6 mandatory
₹500
GE Bharatpur
₹80,000
Yes
9 Aug 2023
7 Jun 2023
17 Jul 2023
7 Jun 2023
15 Jul 2023
2 Jul 2023
9 Jun 2023 - 22 Jun 2023
Amount
M&L for rendering 15 mm thick in CM (1:4) on stone masonry surfaces or External surface of brick-work or on one side of lathing upto 10 m height ,finished fair & even Including taking down cement plaster of any description etc including racking out joints,hacking for key, scrubbing down with water complete all as specified & as directed
Ditto as above item no 1 but in CM (1:6) finished even and smooth on fair faces without using extra cement complete all as specified & as directed
M&L for Rendering 15 mm thick in CM (1:4) on stone masonry surfaces or surface other than fair face of brick-work or on one side of lathing complete all as specified & as directed
Ditto as above item no 3 but in CM (1:6) finished even and smooth without using extra cement on fair faces of brick work complete all as specified & as directed
M&L for 1.5 mm thick (in two coats) Birla wall care /JK Cement wall Max Putty on Wall Surface including sand paper gentle rubbing to obtain smooth surfaces & Mixing is done by using mechanical stirrer including all necessary arrangement for execution of work complete all as specified & as directed.
M&L for Rendering 5 mm thick in cement and sand mortar 1:3 on fair faces of cement concrete surfaces of ceiling of chajjas/roof protection etc including finishing the surface even and smooth without using extra cement & Taking down cement plaster of any description etc including racking out joints,hacking for key, scrubbing down with water all as specified complete all as specified and as directed
M & L Preparation of new plastered or un plastered surface of wall including cornices, pilasters etc by brooming down and applying two coats of distemper oil emulsion white or tinted over a coat of wall primer akali resistant priming paint with hand roller complete all as specified and as directed
M&L Preparation of new plastered surfaces of walls or un plastered surface and applying two coats of cement base paint over a coat of Priming with alkali resistant priming paint with hand roller complete all as specified and as directed by Engr-in-Charge.
M&L Preparation of newly plastered surfaces of ceiling & applying three coats of white wash complete all as specified & as directed
M&L for three coats of white wash on new plastered or unplastered surfaces of walls including prepration of surfaces complete all as specified & as directed
M & L Preparation of old decorated plastered or undecorated plastered surface of wall including cornices, pilasters etc by brooming down, steel wire brushing ,scraping down smoke soot, moulds, moss and efflorescent salts and trading oil and greasy spots and applying one coat of white wash complete all as specified and as directed by Engineer-in-Charge.
Ditto all as per Srl item No 11 here in above but applying one coat of white wash on ceiling complete all as specified and as directed
M&L for complete removal of existing treatment from surface of walls and preparation of old plastered surfaces and applying two coats of exterior emulsion paint (weather proof anti algae) (Product : Asian Paints Apex Ultima or equivalent) 100% acrylic emulsion paint over a coat of EXTERIOR WALL PRIMER using with maximum working pressure of 3300 PSI of any colour by Trucare Graco machine/ Airless paint sprayer (Vands Engineering solutions) / Airless sprayer machine Surya 9 (Jaguar) / Control Pro 190 Air paint sprayer (Wagner) and capable of operational single spray gun with a maximum materials hose length 150m working and In case of dents and holes ,use Asian Paints Wall Putty or a mix of white cement and fine sand in the ratio 1:3. for getting smooth surface complete all as specified and directed. Make : Asian Paint or equilvalent of makes as specified. (Note : M&L for protecting/covering door/window etc during spray shall be deemed to be included in quoted rate)
M&L for complete removal of existing treatment from surface of walls and preparation of old plastered surfaces and applying Asian Paints SmartCare Damp Proof fiber reinforced elastomeric liquid water proofing membrane or equivalent applied on old plastered surface as per manufacture instruction as specified & as directed Note :- (1) Surface should be free from any loose paint, dust or grease. Remove all existing paints coatings completely. It is recommended to use Intense wire brushing, High speed water jet and vacuum cleaner for thorough cleaning of the surface to avoid “Peeling off” problem (2) For filling cracks upto 3mm use Asian Paints Crack Seal. Bigger cracks, damaged portions and hollow areas must be repaired with polymer modified cement mortars. Application:- (1) Apply SELF PRIMING Coat of Damp Proof Ultra Fibre reinforced lquid layer In ratio of 3:1 of (Used water as thinner ) @5.5 Sqm/L & allow to Dry for 4-6 Hours (2) Apply Two Neat Coat of Damp Proof Ultra Fibre reinforced lquid layer without dilution by brush or roller at a time interval 4-6 Hours of Priming Coat
M&L applying Asian Paints SmartCare Damp Proof fiber reinforced elastomeric liquid water proofing membrane or equivalent applied on newly plastered surface as per manufacture instruction aal as specified & as directed Note :-(1) For New masonry surfaces must be allowed to cure completely. It is recommended to allow 14 days as the curing time for new masonry surfaces. (1) Apply SELF PRIMING Coat of Damp Proof Ultra Fibre reinforced lquid layer In ration of 3:1 of (Used water as thinner ) @5.5 Sqm/L & allow to Dry for 4-6 Hours (2) Apply two Neat Coat of Damp Proof Ultra Fibre reinforced lquid layer without dilution by brush or roller at a time interval 4-6 Hours of Priming Coat
M&L for Complete removal of existing treatment,washing, rubbing down and stopping of distemperd and painted surface of old surface by Electric Rotary grinder including brooming down with steel wire brushing, scrapping down smoke soot, moulds, moss and efflorscent salts and trading oil and greasy spots of Wall Surface removing of nails, making good holes , cracks etc , cleaning of floors , glasses, joinery of drops and splashes incl all arrangement necessary for execution of work
M&L for Two coats of oil emulsion distempering white or tinted (copolymer based resin glue to be added for longer durability and better finish) using Spray m/c over one coat of water based white pigmented akali resistant priming paint , over & including 1.5mm thick wall care putty on Wall after sand paper gentle rubbing to obtain smooth surfaces including all necessary arrangement for execution of work .Complete all as specified and directed.
M&L for applying two coats of cement base paint over a coat of old plastered surfaces after applying alkali resistant primer with hand roller complete all as specified and as directed by Engr-in-Charge.
M&L for Preparation of old decorative concrete, plastered/ un-plastered surface of wall including cornices, pilasters etc by brooming down, steel wire brushing ,scraping down smoke soot, moulds, moss and efflorescent salts and trading oil and greasy spots removing nails and filling small holes by putty and rubbing surface by sand paper to prepare the surface and applying one coat of cement based paint using hand roller of approved colour complete all as specified and as directed by Engineer-in-Charge.
Ditto all as per Srl item No 19 here in above but applying one coat of distemper oil emulsion using hand roller white or tinted on ceiling complete all as specified and as directed by Engineer-in-Charge.
M & L Preparation of old distempered surface of wall including cornices etc by brooming down, steel wire brushing ,scraping down smoke soot, moulds, moss and efflorescent salts and treating oil and greasy spots removing nails and filling small holes by putty and rubbing surface by sand paper to prepare the surface and applying one coat of distemper oil emulsion using hand roller white or tinted complete all as specified and as directed by Engineer-in-Charge.
M&L for one coats painting with synthetic enamel paint to old wood or wood based surfaces of any description, not otherwise described over 10 CM width or girth including preparation of old surface including all preparatory work complete all as specified.
M&L for one coats painting with synthetic enamel paint to old steel or steel based surfaces of any description, not otherwise described over 10 CM width or girth including preparation of old surface including all preparatory work complete all as specified
Taking down chowkats or frames n. exc 1.5 sqm each with shutters (without taking off shutters from the frame).
Taking down chowkats or frames exc 1.5 sqm but n exc 4 sqm each with shutters (without taking off shutters from the frame)
Taking down shutter of any description area exc 1 sqm and n. exe 2 sqm
Rescuring without taking down chowkats or frames exc 1.5 sqm but n exc 4 sqm each with shutters (without taking off shutters from the frame) Complete all as specified and directed.
S&F for sollid PVC door frame of size 50mmx47mm made out of 5mm plain colour pvc sheeet reinforced with m.s. squre tube complete all as specified and directed.
Supplying & fixing in the frames at site factory made solid panel PVC door shutter 30mm thick (style) consisting of frame made out of MS tubes for top & bottom rails. MS frame shall be covered with heat moulded plain colour PVC 'C' channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; Panelling of plain colour PVC sheet to be fitted in the M.S. frame welded/sealed to the stiles & rails with suitable PVC sheet beading, and joined together with solvent cement all as specified and shown in SSR 2020 (Part-II) and Particular specification.
S&F 35 mm thick 2nd class hardwood( hollock ) factory made plain framed, panelled shutters (any No. of panels) with lock rail and panel of 9mm BWP commercial ply or 12 mm veneered particle board with commercial veneering on both faces rail & stiles as per IS:1003 (Part-I) kiln seasoned and chemically pressure treated complete all as specified & directed
S&F 35 mm thick 2nd class hardwood ( hollock ) factory made glazed and skeleton shutters open rebated and prepared to receive glass, gauge etc.( without sash bars ), edges of framing plain, chamfered or rounded, fitted with cut and mitred beads for securing glass, gauge etc., sizes of members of shutters as specified in SSR Part I Section 8 clause 8.24 (a) complete all as specified & directed .
M&L for rolled mild steel framed work such as grill grating etc with ends of bars shouldered and/or riveted, or forged into spikes, framed guard bars, barred iron doors , laddres, door gate frame, framed baliusters, walk ways, railing , frame work of water tank and similar work conforming to Fe-290, Gde-E-165
S&F MS holdfast, hook and pintle hinges, large hasp and staples, clamps, hooks for hanging fans and similar small articles conforming to Fe-290 Gde E-165 including necessary welding etc. and fixed in position.
S&F 100 mm butt hinges medium weight cold rolled mild steel, ISI marked, fixed to angle iron chowkats including welding complete.
S&F 150 mm long mild steel barrel tower bolts stove enameled black with bright bolt (ISI marked)
Mild steel pressed steel bow handle oval type stove enameled black of size 150 mm (ISI marked)
S&F MS sliding door bolt, plate type, 300mm long, stove enamelled black, with bright bolt not less than 12mm dia with and including a minimum of 6 bolts & nuts, 4 on bolt plate and 2 on staple plate and fixed.
S&F extruded aluminium alloy handle 150mm size fabricated type anodised, ISI marked .
S&F Aluminium anodised barrel tower bolt 150mm long of extruded section and fixed
S&F 75 mm butt hinges medium weight cold rolled mild steel, ISI marked, fixed to angle iron chowkats including welding complete.
S&F for Factory made steel window with side hung shutteers including projecting type hinges with steel handle and steel peg stay complete with glazing bars dovetailed or welded (Note :- Mild steel wire cloth shall be measured and paid separately under respective items)
All as per item No 41 above but without glazing bars.
M&L dismantling floor,hearth or wall tiling including cement mortar bedding(but not backing) , removing serviceable tiles to store and rubbish off the premises all as specified.
M&L Glazed ceramic Tiles,in verticle surface 350X250X7mm/ 450X300X7mm set & jointed in neat cement slurry and pointed in white or colour cement to match the existing surface over and including 15mm thick rendering in CM 1:4 complete all as specified & directed.
M&L for Coloured Non skid ceramic tiles 7 to 8 mm thick (Square/rectangular) area of each tile exceeding 0.06 sqm but not exceeding 0.11 sqm, set and jointed in neat cement slurry and pointed in coloured cement over & including 15mm thick rendering in CM 1:4.
Demolition of cement concrete (unreinforced) in ground floor and paving n.exc 15 CM thickness (below or above GL) complete all as specified and as directed ..
Providing and laying double charged vitrified floor tiles in 600X600mm sizes (thickness to be specified by the manufacturer),in required combination of themes, with water absorption less than 0.08% and conforming to IS: 15622, of approved make, in any colours and shades, laid on 15 mm thick cement mortar 1:4 (1 cement : 4 coarse sand), jointing with grey cement slurry @ 3.3 kg/ sqm including grouting the joints with white cement and matching pigments etc., complete.
M&L for Machine cut kota stone slab flooring 18-20 mm thick over and including cement screed 20 mm thick in cement mortar 1:6, laid and jointed with gray cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete.
M&L for Machine cut kota stone slab 12-15 mm thick in riser of steps, skirting, dedo and pillar laid over over and including cement screed 15 mm thick in cement mortar 1:4, laid and jointed with gray cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete.
M&L for plain cement concrete 1:3:6 type C-1 1:4:8 (20 mm graded aggregate) as in foundations, filling and mass concrete.
Cutting, polishing to existing Kota/ marble flooring,(three cuttings and mirror polishing) including levelling certain places to Kota/ marble floor & necessary repair work complete spcfd & as directed By Engineer-in-Charge at site
S&F 110mm bore PVC (SWR) pipes single socketed, in any length with rubber ring joints fixed to walls complete all as spcfd & as directed .
S&F in repair brass CP shower rose 125mm size with or without swivel joints, including fixing to steel pipe or union complete all as spcfd & as directed .
S&F in repair vitreous china wash hand basin, white, of size 550x400mm flat back excluding taps, waste, chain and plug but including brackets, cutting for and pinning in ends of brackets or erecting stand complete all as spcfd & as directed .
S&F in repair bib tap, cast copper alloy, with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule of 15 mm bore, complete all as spcfd & as directed .
S&F pillar tap, cast copper alloy with capstan heads,chromium plated, fancy type screwed down high pressure, with or without lettered 'Hot' or 'Cold' with long screwed shanks & fly nuts, screwed for iron pipes of 15mm bore
S&F in repair of pillar tap, cast copper alloy with capstan heads,chromium plated, fancy type screwed down high pressure, with or without lettered 'Hot' or 'Cold' with long screwed shanks & fly nuts, screwed for iron pipes of 15mm bore complete all as spcfd & as directed .
S&F in repair chromium plated15mm bore dia stop valve/Angle valve cast copper alloys, screwed down high pressure with crutch or butterfuly handle , screwed both ends for iron pipe or for unions and fixed complete all as spcfd & as directed ..
S&F in repair of PVC low level flushing cistern 10 ltrs capacity with inlet ball valve float & handle, syphonic action type including brackets & flush pipe of polythelene of low or high level 32mm dia complete all as specified and directed .
M&L 500 ltr ISI marked three layer rotational moulded polyethylene water storage tanks (cylindrical vertical with closed top) hoisted and fixed in position & including 20mm brass ball valve all including taking down Complete all as specified & directed
M&L new 1000 ltr ISI marked rotational moulded polyethylene water storage tanks (cylindrical vertical with closed top) hoisted and fixed in position & including 20mm brass ball valve including taking down Complete all as specified & directed
S & F in repair of vitreous china squatting pan, 'Orissa' pattern, size 580x440 mm white, with integral foot rests, 'P' or 'S' trap, including connection to trap, and to flushing pipe, anti-syphonage pipe etc. complete including making good to floor with PCC, Lime concrete bedding complete all as specified & as directed.
M&L Brick work with sub class 'B' old size bricks straight or curved on plan exceeding 6 m mean radius built in cement mortar 1:6 including Demolition of brick masonry built in cement mortar or cement lime mortar including all quoins, arches, pillars etc but excluding ashlar facings,dressed stone work and precast concrete articles including all as spd and directed by Engr-in-Charge.
M&L for writing letters or figures (Block, Roman, Italic or Indian ) n.exc. 30cm high with thick synthetic enamel paint all as specified and directed by Engineer-in-charge.
VASUNDHARA AND COMPANY
PD GUPTA AND COMPANY
GANGA CONSTRUCTION
M/s Ranaji Construction Co
M/S MAMTA CONSTRUCTIONS
stage.html
html • 0.06 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .