REPAIR AND REPLACEMENT OF JOINERY, FLOORING, PLASTERING, ROOF TREATMENT AT AJAYMERU, MGS ENLCAVE AND HALDIGHATI LINE AT JAIPUR MIL STN UNDER GE(S) JAIPUR

Amount

Taking down door chowkhat or frames with shutters (Without taking off shutters from frame) area n.exc 1.50 Sqm each, complete all as specified and as directed by Engr-in-Charge.

All as per item No 1 above but area exc 1.50 Sqm but n.exc 4 Sqm each, complete all as specified and as directed by Engr-in-Charge.

Taking down shutters of any description n exc 1.00 Sqm each, , complete all as specified and as directed by Engr-in-Charge.

Taking down shutters of any description exc 1.00 sqm but n exc 2.50 sqm each, complete all as specified and as directed by Engr-in-Charge.

M&L Mild steel angle iron door frame 40x40x6mm conforming to Fe 410.0 incl.12 mm dia deformed bars( Tie bar) for strengthening at bottom of chowkhat incl.cutting floor to accommodate strengthening bar & making good in PCC(1:2:4) type B0, , complete all as specified and as directed by Engr-in-Charge.

S&F MS holdfast, hook and pintle hinges, large hasp and staples, clamps, hooks for hanging fans and similar small articles conforming to Fe-290 Gde E-165 including necessary welding etc. and fixed in position, complete all as specified and as directed by Engr-in-Charge.

Cutting holes in stone / brick walls built in CM for inserting hold fast & making good dismantled portion in CM (1:3) depth of embaded portion of holdfast n. exc half brick, complete all as specified and as directed by Engr-in-Charge.

M&L 35mm thick IInd class hard wood factory made plain, framed, panelled shutter (two panel) with lock rail & panel of 12mm veneered particle board with commercial veneering on both faces. The size of rail & steel as per IS:1003 (Part-I) kiln seasoned & chemically pressure treated, complete all as specified and as directed by Engr-in-Charge.

M&L 30 mm thick Flush shutters, solid core construction, with block board core and plywood face panels, commercial type on both sides, complete all as specified and as directed by Engr-in-Charge.

M&L 35mm thick 2nd class hard wood factory made Glazed and skelton shutters open rebated & prepared to receive glass gauze etc (without sash bars) edges of framing plain chamfered / rounded fitted without & mitred beads for securing glass etc size of members of shutters as sspecified in SSR Part-I Section 8 Clause 8.2 (a) supplied & fitted to chowkats, complete all as specified and as directed by Engr-in-Charge.

S&F Factory made steel window with glazing bar , with side hung shutters incl projecting type hinge with steel handle and steel peg stay complete with glazing bars dovetailed or welded, complete all as specified and as directed by Engr-in-Charge.

M&L Framed work such as grills,gratings, etc.. with ends of bars shouldered and/or riveted or forged into spikes; framed guard bars; barred iron doors ladders; framed balusters; walk ways; railings; framework of water tanks and similar work con- forming to Fe.290.Gde-E-165, complete all as specified and as directed by Engr-in-Charge.

S&F 100 mm butt hinges medium weight cold rolled mild steel, ISI marked, fixed to angle iron chowkats including welding, complete all as specified and as directed by Engr-in-Charge.

S&F Aluminium, anodised, barrel tower bolts 150mm long of extruded section, complete all as specified and as directed by Engr-in-Charge.

S&F Aluminium alloy, anodised, sliding door bolt 300 mm long with hasp, staple (bolt type) & fixing clips of sheet, cast or extruded sections & fixing bolts & sliding bolts of extruded sections or cast aluminium alloy, complete all as specified and as directed by Engr-in-Charge.

S&F Aluminium handles 125 mm size, cast type, anodised, complete all as specified and as directed by Engr-in-Charge.

S&F aluminium anodised floor door stopper overall length 140 mm double legged with rubber shoe, fixed to bottom rail of door, complete all as specified and as directed by Engr-in-Charge.

M&L of Aluminium (Diecast) bodyDoor closer hydraulically regulated, designation No 3, universal type, suitable for door shutters of 851 to 1000 mm in width and of weight between 61 to 80kg and fixed in repairs, complete all as specified and as directed by Engr-in-Charge.

Hacking out old broken glass pane (any thickness, size, quality/ description) from metal/wood frame including punching or drilling out old glass panes, pins, springs, clips & providing & fixing new ones 3 mm thick plain sheet glass ordinary quality in square not exceeding 0.50 Sqm in each pane. glazed with oil putty, complete all as specified and as directed by Engr-in-Charge.

Hacking out old broken glass pane (any thickness, size, quality/ description) from metal/wood frame including punching or drilling out old glass panes, pins, springs, clips & providing & fixing new onesFigured glass 4.0mm thick, pin head type ordinary quality in square not exceeding 0.50 Sqm in each pane. glazed with oil putty, complete all as specified and as directed by Engr-in-Charge.

S&F Figured glass 4.0mm thick, pin head type & glazing with oil putty in squares n exc 0.5 sq.m in each pane, complete all as specified and as directed by Engr-in-Charge.

S&F galvanised mild steel wire cloth 0.50 mm nominal dia of wire and average width of aperture 1.00 mm and fixed with tinned tacks or galvanised wire staples including welding in steel section window, complete all as specified and as directed by Engr-in-Charge.

S&F in repairs galvanised mild steel wire cloth 0.50 mm nominal dia of wire and average width of aperture 1.00 mm and fixed with tinned tacks or wherever necessary including wooden beading in wooden doors/windows wherever required, complete all as specified and as directed by Engr-in-Charge

M&L Applying two coats of synthetic enamel paint on wooden surfaces of any description, not otherwise, described, over 10cm width or girth including preparation of new surface & applying one coat of pink primer, complete all as specified and as directed by Engr-in-Charge

M&L Applying two coats of synthetic enamel paint on steel & iron surfaces of any description, not otherwise, described, over 10cm width or girth including preparation of new surface & applying one coat of red oxide, zinc chrome, complete all as specified and as directed by Engr-in-Charge

M&L Factory made solid panel pvc door shutter 30mm thick (style) consisting of frame made out of M.S. tubes for top & bottom rails, M.S. frame shall be covered with heat moulded plain colour PVC `C' channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; Panelling of plain colour PVC sheet to be fitted in the M.S frame wedded/ sealed to the stiles, & rails with suitable PVC sheet beading, and joined together with solvent cement, suppling & fixing in the frame at site as per specification & drawing, , complete all as specified and as directed by Engr-in-Charge

M&L Solid PVC Door Frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with M.S Square tube, suppling & fixing in opening as per specification & drawing, , complete all as specified and as directed by Engr-in-Charge

Taking down cement or cement lime plaster, any description on brick or stone walls, etc. including raking out joints, hacking for key, scrubbing down with water, etc., complete all as specified and as directed by Engr-in-Charge

M&L rendering 15 mm thick in cement mortar 1:6, on brick walls or concrete surface, surface finished even and smooth without using extra cement, complete all as specified and as directed by Engr-in-Charge

M&L rendering 15mm thick in cement mortar 1:4 on stone masonry surfaces or surface other than fair face of brick work of walls, finished even & smooth without using extra cement, complete all as specified and as directed by Engr-in-Charge

M&L for preparation of new plastered surfaces and applying two coats of cement base paint of approved shade on walls, complete all as specified and as directed by Engr-in-Charge

M&L for complete removal of existing treatment including cleaning of mortar drops, smoke soot, moulds, moss, efflorescent salts, trading oil, greasy spots etc and preparation of plastered surfaces including filling of depressions etc and applying two coats of oil bound distemper of approved tint, complete all as specified and as directed by Engr-in-Charge

M&L for preparing of old decorated surfaces of (Plastered or unplastered) including cornices pillasters and other wall features by washing, rubbing down and stopping of distempered and painted surfaces of ceiling and applying one coat of oil emulsion distemper white or tinted including filling of any minor hole/ deperssion with wall care putty and scaffolding arrangement, trestles, ladders etc, complete all as specified and as directed by Engr-in-Charge

S&F aluminium anodised glazed door shutters including aluminium anodised frames for shutters, aluminium sections weighing 0.55 Kg/m (minimum) including necessary joining cleats, bottom plates, aluminium anodised snap beading, glazing clips, rubber packing, screws etc. complete including aluminium anodised fittings such as 100mm locking arrangement of Harrison, hanging on 03 nos MS butt hinges suitable handle etc. including 5mm thick tinted glass with including making good disturbed portion with the cement mortar 1:4 or PCC 1:2:4 type B0, complete all as specified and as directed by Engr-in-Charge

M&L for anodised Aluminium frame for holding of two track sliding shutter fixed type with aluminium section weighing incl. necessary joining, cleats, glazing clips, rubber packing powder coated aluminium snap beading, screws etcand beading for fixing of galvanised wire wire mesh, complete all as specified and as directed by Engr-in-Charge Bottom Section- 20880 Jindal or equivalent Top and Side Section - 20829 Jindal or equivalent

M&L for anodised Aluminium frame for fixed type with aluminium section weighing 0.55 Kg/Mtr incl. necessary joining, cleats, glazing clips, rubber packing powder coated aluminium snap beading, screws etc and beading for fixing of galvanised wire mesh, complete all as specified and as directed by Engr-in-Charge

Aluminium powder coated door/window shutter openable/ sliding type with aluminium section weighing 0.35 Kg/ Mtr incl. necessary joining, cleats, glazing clips, rubber packing aluminium powder coated snap beading, screws, handle & tower bolt etc, complete all as specified and as directed by Engr-in-Charge

S&F Figured glass 5.0mm thick, pin head type & glazing with oil putty in squares exc 0.5 sq.m in each pane, , complete all as specified and as directed by Engr-in-Charge

M/L for 19 mm thick coloured kitchen cabinet door shutter made out by MDF boards pre laminated both side with PVC coated lipping work on edge of shutter including fixed in repair, complete all as specified and as directed by Engr-in-Charge

M/L for 19 mm thick kitchen cabinet partition and shelf etc made out by MDF boards pre laminated both side including fixed in repair . And including support/ bearing member of shelf in cabnaite, complete all as specified and as directed by Engr-in-Charge

S & F Auto close hinges, stainless steel, bright finish or electrogalvanised fixed in repair, complete all as specified and as directed by Engr-in-Charge

S&F brass handle of 100mm size cast type, polished bright, , complete all as specified and as directed by Engr-in-Charge

M&L for coloured Non Skid Ceramic tiles 7 to 8mm thick (square/rectangular) area of each tiles exceeding 0.06 sqm but not exceeding 0.11 sqm , in floors etc, set and jointed in neat cement slurry, over 10mm thick rendering in CM (1L4) and pointed in white or coloured cement to match screed bed or bedding layer of cement mortar 1:4, 15mm thick finished even and smooth without using extra cement, complete all as specified and as directed by Engr-in-Charge

M&L for coloured Glazed ceramic tiles in vertical surfaces of size 350mm x 250mm/ 450x 350 mm both 7mm thick set and jointed in neat cement slurry, over 100mm thick rendering in CM (1:6) and pointed in white or coloured cement to match, complete all as specified and as directed by Engr-in-Charge

M&L for light shade vitrified ceramic tiles 10mm thick (square/rectangular) polished, area of each tiles not exceeding 0.36 sqm , in floors etc, set and jointed in neat cement slurry and pointed in white or coloured cement to match over 15mm thich screed bed in cement mortar 1:4, complete all as specified and as directed by Engr-in-Charge

M&L for light shade vitrified ceramic tiles 10mm thick (square/rectangular) polished, area of each tiles not exceeding 0.36 sqm , on vertical surfaces such as in skirting & dado set and jointed in neat cement slurry and pointed in white or coloured cement to match over 15mm thick rendering in cement mortar 1:4 , complete all as specified and as directed by Engr-in-Charge

M&L for surface preparation by removal of all loose particle to ensure clean, smooth and dry surface and laying 25mm thick PCC type B-0, (1:2:4) using 12.5mm graded stone aggregate finished even & smooth without using extra cement to cover negative slope into prop with WPC @ 3% weight of cement, complete all as specified and as directed by Engr-in-Charge

M&L Applying one coat of polymeric primer @ 0.30 Kg per sqm, conforming to IS : 3384. A layer of APP based polymeric membrane, 3 mm thick (min), weighing not less than 3.5 Kg/m2 reinforced with polyster non woven fabric ( weighing not less than 150 gms/ Sqm). Application of polymeric membrane shall be by torch application all as per manufacturer instructions. and finally applying one coat of bitumen @ 1.2 kg/sqm on APP membrane before application of aluminium paint, complete all as specified and as directed by Engr-in-Charge

M&L one coat of aluminium paint over APP Membrane, complete all as specified and as directed by Engr-in-Charge

M&L for damp proof guard for walls and other concrete surfaces including preparation of surface even and smooth and making good with putty and oil based destemper also includes rednering in 15 mm thick in CM 1:6 all as sspecified with taking down of cement plaster, complete all as specified and as directed by Engr-in-Charge

M&L Machine cut kota stone slab flooring 20-25mm thick over cement screed base laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete over 15 mm thick screed bed in CM 1:4, complete all as specified and as directed by Engr-in-Charge

M&L for PCC 1:2:4 type C1 using 20mm graded stone aggregate as in plinth protection, 40 mm thick finished even and smooth without using extra cement.

M&L for PCC 1:2:4 type B1 using 20mm graded stone aggregate as in flooring 75mm thick finished even and smooth with using extra cement.as directed by Engineer-in-Charge.

M&L for 75mm thick PCC 1:4:8 type D2 using 40mm graded stone aggregate as in sub base to floor finished fair & even all as sspecified and directed by Engineer-in-charge.

M&L for machine pressed precast concrete interlocking paver block any shape and size confirming to IS 15658-2006 of 60mm thickness , M-35 grade, set, jointed and pointed in dry sand laid over and including 25mm thick sand cushion, in neat cement slurry in floors with grey cement & no pigments , complete all as specified and as directed by Engr-in-Charge

Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises, complete all as specified and as directed by Engr-in-Charge

Demolition of PCC in ground floors and pavings not exc 15cm thickness ( below or above ground level ), complete all as specified and as directed by Engr-in-Charge

Demolition of stone slabs and tiles of any description or thickness in floors laid bedded and pointed in any mortar., complete all as specified and as directed by Engr-in-Charge

M&L for Granite (of any type) work (table rubbed and polished) 20mm thick in flooring over & including 15mm thick screed bed (bedding layer) in CM 1:4, pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of Granite including cutting and polishing (half mirror polish i.e. half granite polish as per local trade practice) , complete all as specified and as directed by Engr-in-Charge

M&L for Granite (of any type) tiles 20mm thick, in flooring machine cut, bedded and jointed with grey cement slurry and pointed with white cement with admixture of pigment to match the shade of the granite stone including 15 mm thick screed bed (bedding layer) in CM 1:4 cutting and polishing, complete all as specified and as directed by Engr-in-Charge

M&L for Granite (of any type) tiles 20mm thick, in skirting /dado machine cut, bedded and jointed with grey cement slurry and pointed with white cement with admixture of pigment to match the shade of the granite stone including 10mm thick rendering in cement mortar 1:4 cutting and polishing, complete all as specified and as directed by Engr-in-Charge

S.R.Enterprises

M/S JALANDRA CONSTRUCTIONS

UNIVERSAL INFRAPROJECT PVT LTD

J.J.ENGINEERING

Baradwal Construction Company

M/S Mohan Lal Gupta

JAGDAMBA CONSTRUCTION COMPANY

M/s Radhey Enterprises