NAYE TUBEWELL ME COMMISSIONING MOTOR PUMP CABLE SWITCH AADI KARY MEHRAMSAR

Supply & Installation of 3 phase marked submersible motor pump set five star if not available then three/ four star whichever higher rating available) rating by BEE and as per 5: 8034-2018 (pump) and 5 9283-2013 (motor) or as amended up to date of approved make of following duty condition with required accessories including making connection suttable for tube well/DCB. The job includes lowering of motor pump installation of complete fitting & accessories, jointing of electrical cables up to switch boant, testing of submersible pump set and interconnection up to water mains, complete in all respect.

Supply and Fixing of electric control feeder panel comprising of suitable rating MCCB, fully automatic star-delta starter, over load relay, ampere meter with CTs, volt meter, phase preventer, suitable starting capacitors, phase indicators, lighting arrangement etc complete suitable for three phase pump set. The panel should have space for energy meter (supplied by DISCOM). All these equipments shall be housed by panel box made cut from 18 gauge MS. Sheet with powder coating. Panel should be of minimum size 500 x 600 x 450 mm with Stand (made of angle iron of size 35x33x5mm) duly bolted/screwed with enclosure box having 4 legs, each leg's length 1 and double door including in buit locking system. The lngs should be embedded in M-15 cement concrete plat form. The size of CC platform should be equal or bigger than the bate size of panel having height of of at least 200 mm from ground level. The panel should have opening of suitable slae in front of space for energy meter with glass for meter reading. The operation of panel should be suitable for on 440 Volt AC Supply

Supply & Fixing of Si marked three core PVC flat submersible cable as per 15 694:1990 or amended up to date and conductor as per class 5 of 15 #130:2380 including making connection etc

Supply & Fixing XLPE insulated / P.V.C. sheathed cable of 1.1 KV grade with aluminium conductor Armoured of IS:7098-I/1554-1 approved make in ground as per IS:1255 including excavation of 30cmx75cm size trench, 25 cm thick under layer of sand, second Class bricks covering, refilling earth, compaction of earth, making necessary connection, testing etc. as required of size. 35.0 Sq.mm, 3.5 core

Plate farthing as per 15:3043 with 6.1. Earth plate of size 600mm x 600mm Each 60mm by embodying 3 to 4 mtr, below the ground level with 20 mm 01. ders watering Pipe including all accessories like nut, bolts, reducer ipple, wire meshed funnel, and C.C. finished chamber covered with hinged type with locking arrangement CL. Cover, CL. Frame of size 300mm 300mm complete with alternate layers of salt an charcoal testing of sarth resistance as required.

Supply & Fixing M3 dame set of 50x6 mm flat from iron with nuts ults etc for holding the river pipe assembly of submersible pump set

Supply & Fixing tube well cover of MS sheet Brom thick at top & Smm thick 100mm wide alvoud around the edge so as to form a cap on the top end of casing pipe with Gi Nipple 45cm long & two i flanges at both ends Romm ses passing through a hole in the centre of MS sheet. A 25 mm ket with end plug shall also be welded Pheving sutside thereed of size 1/3" (for installation pressure gauge) shall be provided & welded with Bone ripple near top plate nipple shall be

Providing & Lowering in tube well i marked Gi Pipe medium duty ("B" class), Steel tube as per 15:1239 or amended up to date and zinc coating as per IS 4736, threaded and double flanged (welded) on both ends and two number 25x3mm Ms fist welded on both ends between pipe & flange, rubber washer & nut bolts etc. complete in all respect