REPAIR TO ROADS DAMAGED DUE NCN CABLE LAYING UNDER DEPOSIT WORK GE (NW) KUNJALI COLABA MUMBAI

Amount

Material and labour for Soling (or sub base) 100 mm with broker boulders or quarried stone, inter stices filled, surface formed and rolled and consolidated to required gradient and camber complete all as specifed and as directed by Engr-in-Charge.

Material and labour for 150 mm thick (compacted consolidated thickness) WBM, with coarse aggregated in two layers of 75mm thick each with grading 2 (63 to 40mm size) spread, rolled and consolidated to gradient and camber required rolled with power rollers complete all as specifed and as directed by Engr-in-Charge.

Material and labour for premix bituminous macadam consolidated thickness by using paving bitumen VG-30 grade with binder content @ 4% by weight of total mix, laying with mechanical paver, rolled and compacted to required camber and gradient by using 8 to 10 tonne capacity power roller complete all as specified and directed.

Material and labour for preparing balck top surfaces by brushing with wire brushes for removing caked mud etc. Sweeping with brooms and finally fanning the cleaned surfaces with gunny bags to remove all loose dirt etc. complete all as spcified and as directed.

Material and labour for applying evenly a tack coat with paving bitumen of VG-10 grade at 5 Kg per 10 Sqm with the help of pressure sprayer complete all as specified and directed by Engineer-in-Charge.

Material and labour for applying evenly a priming/ tack coat of using paving bitumen VG-10 grade at 10 Kg/10 Sqm by mechanical sprayer complete all as specified and directed.

Material and labour for Bituminous premix asphaltic semi dense concrete 25mm consolidated thickness with 6 % binder content by weight of total mix , rolled and compacted to required camber and gradient complete all as specifed and as directed by Engr-in-Charge.

Preparation of black bituminous road surface and applying thermo plastic road marking paint (including dashes, arrows, letters etc) minimum 2mm thick, with an applicator machine and heated mixer, with stirring mechanism at temperature 160)C, laid uniformly with width as directed, paint conforming toBS-3262 part I & II of 1989 etc, complete as per manufacturers instructions all as directed by Engineer-in-Charge,

Hardcore of gauge n.exc 63 mm, deposited, spread and levelled in layers n.exc 15 cm thick, watered and rammed to a true surface complete all as specifed and as directed by Engr-in-Charge.

Material and labour 100 mm thickness PCC 1:4:8 type D2 using 40mm graded stone aggregate as in floor and surface shall be finished with broom including form work asrequired complete all as specifed and as directed by Engr-in-Charge.

Material and Labour machine pressed pre- cast concrete interlocking coloured paver block and shape and size conforming to IS-15658-2006 of 60mm thickness M-35 grade with grey cement and pigment laid dry over stone dust or sand cushioning and compacted using vibrator complete all as specifed and as directed by Engr-in-Charge.

Material and labour for chequred cement concrete tiles 20cm x 20cm x 30mm thick, set, jointed and pointed in neat cement slurry with mixture of white and grey cement in equal proportion no pigment in floors complete all as specifed and as directed by Engr-in-Charge.

RS Enterprises

MUKESH CONSTRUCTION CO