Construction work

Excavation in foundation in ordinary soil(Loam, clay or sand) Including lift upto1.50 M. and lead upto 30 M. and including filling watering and rammind of excacated earth into the treaches or into the space between the building and the sides of foundation trenches or into the plinth and removal and disposal of surplus earth as directed by the Engineer-in- charge upto a distance of 30 M. from the foundation trenches. SI.No .51(A)

P.C.C.(1:6:12) cement fine sand and brick Ballast in foundation and under floorsincluding supply of all materials labour tools and plants etc. required for proper completion of the work. s.i no 273

M 150 (1:4) Brick Work ,coarse sand including supply of all materials labour T&p etc.required for proper completion of the work . s.i no 305 a

Cement Concrete with 2 cm guage approved stone ballast, Coarse sand & cement in the materials, labour Tools & plants etc. required for proper completion of the work.si no.279

M 150 (1:4) Brick Work ,cement & coarse sand in superstruture including supply of all materials labour T&p etc.required for proper completion of the work . s.i no 305 a

R.C.C. Work with cement, approved coarse sand & 2 cm (3/4") guage approved stone ballast in proportions of 1:1.5:3 in R.C.C,SLAB excluding supply of reinforcement and its bending. But including its fixing and binding wire and including necessary centering and shuttering etc. and supply of all materials, labour, tools & plants etc. required for proper completion of the work Excluding cost of binding wire Sl No288

Supplying, fiting and placing HYSD bar reinforcement in Foundation Complete as per Drawing and technical specifications Clause 1000 and 1202

12 mm thick plaster (1:4) with cement & fine sand minimum thickness n-ot to be less than 1 cm including supply of all material labour T&P etc. required for proper completion of the work s.i no 584 new item

E/W in cutting or in embankment in ordinary soil excavation to be in the from of regular pits not be exceeding 0.50 m in depth and earth work in embankment to be in 20 cm. Layers including ramming and dressing the surface to required levels and slop and also including 1.5 m. lift and up to 15 km .SI NO. 253A+261B+231B

Providing wall putty on new surface with approved quality material of Berger/ J.K./Birla or similar make 2 coats.

Finishing wall with water proof cement paint of approved make and quality on new wood with two coat to give an even shade including supply of all materials, labour, Tools & plant etc. requied for proper completion of the work.661+662

Painting roofs or other iron work in large areas with one coat priming and one coat of approved (above one Sq. Metre) paint (British antesal or equivalent) including supply of all materials, labour, Tools & plants etc. required for proper completion of the work. Paint to be used should confirm the ISI no. 644+645

Same as in item 502 above but in heavy sizes such as trusses, built up gates, record racks, roof work, gates etc. including rivetting or welding where necessary. Si no

Supply and fixing 6mm. (¼") China white glazed tiles in flooring or in skirting or dado laid with 1:3 Cement and approved coarse sand mortar finished with white cement slurry, jointinf and polishing complete, including supply of all materials, labour and Tools and Plants.

Supply and fixing vitrified thiles (Kajaria, Bell, J & J or Somani) in flooring or in skirting or dado laid with 1:3 cement and approved coarse sand mortar finished with white cement slurry, jointinf and polishing complete including supply of all materials, labour and T & P complete.

Providing and fixing white vitreous china pedestal type water closet (European type W.C. pan) with seat and lid, 10 litre low level white P.V.C. flushing cistern, including flush pipe, with manually controlled device (handle lever), conforming to IS : 7231, with all fittings and fixtures complete, including cutting and making good the walls and floors wherever required :. D.S R 2023 NO. 17.2.1

Providing and fixing brass stop cock of approved quality : D.S R 2023.18.16.1 15 mm nominal bore

Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, including fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and testing of joints complete as per direction of Engineer in Charge. D.S R 2023 17.8.2

Providing and fixing wash basin with C.I. brackets, 15 mm dia CP Brass single hole basin mixer of approved quality and make, including painting of fittings and brackets, cutting and making good the walls wherever required:- (a) White Vitreous China Wash basin size 550x400 mm with a15 mm CP Brass single hole basin mixer D.S R 2023. 17.7a

Providing and placing on terrace (at all floor levels) polyethylene water storage tank, IS : 12701 marked, with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipes but without fittings and the base support for tank. DSR NO. 18.48

Wiring point for light/fan with 1sq.mm FRLSH insulateD multistrand single core copper conductor in PVC conduit etc all complete. S.I.NO. 121(B)

Wiring point for plug with 1sq.mm FRLSH insulateD multistrand single core copper conductor in PVC conduit etc all complete. S.I.NO. 124C

Supply and fixing of LED Tubelight with battern suitable for upto 1 x 22 watt LED Tube light fitting including tube on surface complete in all respect S.I.NO. 1413

Please Enable Macros to View BoQ information