KNMT Construction of New Bus Stand Opposite to Police Station in Kunnathur Bus Stand Ward no 5 SF No.91 4 5 in KunnathurTown Panchayat.

Amount

Earth work excavation for foundation in Hard stiff clay, stiff black cotton, hard red earth, shales murram, gravel,stoney earth and earth mixed with small size boulders SS.20B and Sand, silt or other loose soil, wet sand,or silt not under water, light black cotton soil, sandy loam ordinary soil and to full depth as may be directed except in hardrock requiring blasting inclusive of shoring shuttering and baling out water and cleaning and levelling the site etc.,complete 10 cum

Depth up to 2m

Plinth beam

Supply and providing anti termite pre construction treatment using aldrin or delrine hetochloride IS 6313 (partII) code including cost of all materials , Labours , core charges for TP etc Complete.,

Supplying and filling in foundation and basement with Crushed Stone Sand (M- Sand) in layers of not more than 15cm thick well rammed watered and compacted etc., complete complying with standard specification.

Supplying and filling in foundation and basement with Well Gravel in layers of not more than 15cm thick well rammed watered and compacted etc., complete complying with standard specification.

Plain Cement Concrete 1:4:8 (one part of cement, four part of Crushed Stone Sand (M- Sand) and eight part of coarse aggregates) using 40mm size ISS HBG metal including cost and conveyance of all materials to site and including for the mixing, laying and labour charges and all incidential charges such as water providing etc., complete as per standard specification

Supplying and erecting centering for vertical plain/ RCC concrete walls of supply channel, retaining wall etc upto 90Cm height with necessary supports,all cross bracing with mild steel size of 90cm x60 cm and gauge BG 10 stiffened with welded mild steel sheet angles of size 25 mm x25 mm x3mm for bearing laid silver Oak/ Country wood joist of size 7.50 cm x5.0 cm spaced @ about 90 cm C/C and supported by Casurina props of 10 cm to 13 cm spaced @ 75 cm C/C etc,, complete complaying with standered specfications and as directed by the departmental officers.

Basement

Slab & beam

Column

Providing and laying in position Standardised Concrete Mix M-25 Grade in accordance with IS 456 - 2000 using 20mm and down graded hard broken granite stone jelly for all RCC items of works with minimum cement contenet of 350Kg/ cum and maximum water cement ratio of 0.55 including admixture (Plasticiser / super plasticiser) in recommended proportions as per IS 9103 to accelerate, related setting of concrete, improve workability without imparing strength and durability with about (5.0cum), 7730Kg of 20mm machine crushed stone jelly and with about (3.3 cum), 5156kg of 10 - 12mm machine crushed stone jelly and with about (4.79cum) 7670 kg of Crushed Stone sand (M- Sand) but excluding cost of reinforcement grill and fabricating charges centering and shuttering but including laying, vibrating with mechanical vibrators, finishing, curing, etc and providing fixtures like fan clamps in the RCC floor / roof slabs wherever necessary without claiming extra cost etc., complete complying with standard specification and as directed by the departmental officers - The Coarse and Fine aggregates to be used should comply with the requiremnents of IS standards.

Basement

Ground Floor

First Floor

Supplying ribbed for Steel rods including cutting cranking fabricating asembling laying in exact position typing with soft steel wire 16 or 18 BWG etc., complete for all RCC works as per design given including cost of steel and binding wire also in all floors as per standard specification. SS86 &86A ,V,VI,S3,S6. VII

Brick work in CM 1:5 (one cement & Five Crushed Stone Sand (M- Sand)) using II class ground moulded bricks of size 9" X 43/8"X 2 3/4" including finishing, curing, etc., complete complying with standard specification - 100CFT

Basement

Ground Floor

First Floor

Brick work in CM 1:3 (one cement & Three Crushed Stone Sand (M- Sand) using ground moulded chamber bricks of size 9"X4 3/8"X 2 3/4" standard specification including finishing, curing, etc., complete complying with standard specification - 100cft

Paving the floor with Vitrified Marbonite tiles of approved quality and colour of size 600x600x8mm thick of approved make, quality and colour in all floors over a base layer of cement mortar 1:3(one cement three sand) 20mm thick and laid straight alignment and pointed neatly with colour cement at the rate of 0.40kg/m2 laid without any air gap in the tiles neatly and fixing in position as per standard specifications and as directed by the departmental officer. The colour & quality of tiles should be got approved by Municipal Engineer before use on work

Finishing the top of roof with one course of machine pressed tiles of size 200 mm x 200 mm x 20 mm of approved quality in Cement Mortar 1:3 (One part of Cement and Three part of Plastering Sand (P- Sand)), 12 mm thick mixed with water proofing compound conforming to ISS at 2% by weight of cement used and the joints pointed neatly to full depth of tiles with the same cement mortar mixed with red oxide and water proofing compound including curing etc., complete

Weathering Course with Concrete Broken Brick (S.I.No.278) & ( P & D) Data 54.Jelly 20mm gauge in pure slaked lime (no sand to be added) over roof slab,the proportion of brick jelly to lime being '32 to 12.5 well beated with wooden beaters for giving required slope and thickness as directed by the departmental officers etc., complete.-10 cum

Special Ceiling Plastering with cement mortar 1:3,10 mm ,thick in all floors including cost and conveyance of all materilas to site and labour charges etc,complete as per standard specifications (S.I.306)

Plastering with cement mortar 1:5 (One part of Cement and Five part of Plastering Sand (P- Sand)) 12mm, thick in all floors including cost and conveyance of all materilas to site and labour charges etc,complete as per standard specifications

Supplying and Painting the new plastered walls two coats of Exterior surface with approved Exterior Plastic Emulsion paint approved quality and colour over a priming coat, including thorough scrapping, clean removal of dirt, etc complete and including necessary plaster of paris, putty, wherever required etc, complete as per standard specification.

Manufacturing, Supplying and Fixing of Stainless Steel Hand rails for staircase using 50mm dia 304L Grade Stainless Steel pipe of 1.60mm thick at required locations to a height of 900mm from finished floor level welded to 38mm dia Stainless Steel pipe post of 1.00mm thick as vertical at 900mm centre with 2 Nos. of 25mm dia intermediate horizontal stainless steel pipe of 1.60mm thick in between. The vertical pipe has to be welded to the 100 X 100 X 6mm MS base plate encased in the base concrete. The rate is inclusive of the charges for cutting, bending, welding, grinding, polishing, conveyance, electrical charges, etc. complete

Dadooing walls with Glazed tiles of sizes 305mm X 200mm X 6mm size of approved make and quality and colour Set in cement mortar 1:2 (One part of Cement and two part of Plastering Sand (P- Sand)) over 10 mm base layer plastering and pointing with white cement neatly as directed.

Paving the floor with design Antiskirt ceramic tiles (colour and shade as directed) of size 305 mm x 305mm x 6 mm in all floors over a base layer of cement mortar 1:3 (One part of Cement and Three part of Plastering Sand (P- Sand)), 20mm thick laid in-situ and pointed with same coloured cement

Providing granolithic floor finish of 25mm thickness with plain cement concrete 1:2:4 (One Cement, Two crushed sand (M-Sand) and Four aggregate) using 10 to 12mm gauge hard broken stone jelly including laying, finishing and the top rubbed smooth with power trawl, thread lining, curing etc. complete complying with standard specification and as directed by the departmental officers. (The rate is inclusive of necessary planking for panelling wherever necessary and as directed by the departmental officers)

Supply and fixing of following Steel Box section including cost of Material conveyance of all material, fabrication and fixing charges etc.Complete as per ISI with rust preventive primer & ready to assemble condition for easy installation at site including dismantling making necessary with power drill to the accessories such as supplying and fixing holdfasts, plastic bush inserts receiver runner bottom shock absorbers etc. and Steel Window Complete as Directed by the Departmental Officer.

Painting the new iron works such as steel doors, Windows,Ventilators windows bars,balustrades etc, in all floor with two coats of best approved first quality and colour of synthetic enamel paint of approved quality, colour and brand (to be approved by executive engineer before use on works ) over one the existing red oxide priming coat in all floors excluding cost of priming coat etc, complete complying with Standard Specification. ( The Make, Quality and colour of paint should be got approved by the engineer in charge before use on works )( TNSS NO or NBC No 61 V VI (54) 3)

Fabricating, Supplying and fixing of per painted Color Galvalum iron sheets with the following specifications, the material shoud be of PPGI tile profile with a red clolour or any other approved design 0.47 mm thick 24 guage having width 1050 mm. The sheet should be G.I. base pre painted hot dipped galvanuzed iron sheet and to be fixed with shelf tappin galvanized iron sheet and to be fixed wth shelf tapping screws plastic washer. the washer and screws to be fixed by using minute power machin drilled with out damaging the sheetspaint coating to be regilar modified polyster coat with zinc coating of Z 120 GSM paint thickness the fininsh optional matt finish. The Sheet to be Fixed with making sutiable Corrugate, Cutting the sheet in to the required size and making ornamental designs as per the site condition and as directed by the departmental officers.

Supplying and fixing in position best approved of BIS quality 110mm PVC Rain water down fall pipe having a pressure of 4Lg/Sw.cm iincluding cost of necessary PVC shoe. VC Bend, cast iron gratings of requireddiameter and special clamps, brass screws, nails etc.

Wiringwith2x1.5sq.mm. PVC insulated SC unsheathed FRLS copper conductor of 1100V grade in suitable PVC rigid pipe concealed inwall and ceiling with PVC accessoires inflush with wall with 3mm thick lumsheet cover with TW switch box and 5AFT switch and making good of the concealed portion with suitable colour for PVC concealed light /fan Point (for electronic regulator) (5 points per coil)

Wiring with 2x1.5sq.mm. PVC insulated SC unsheathed FRLS copper conductor of 1100V grade insuitable PVCrigid pipe concealed in wall andceiling with PVC accessories inflush withwall with150mmx100mmx113mm TW switch box with 3mm thickhylemsheet cover for 5A3 pinnon inter lockingwall socket with5A flush type switchwithearthwireconnectionof1.5sq.mmcopperwireandmakinggoodof theconcealedportionwithsuitable colour for concealed PVC plug point

Wiringwith2x4sq.mm. PVCinsulatedSCunsheathedFRLScopperconductorcableof1100VgradeinsuitablePVC rigidpipeconcealed inwall andceilingwithPVCaccessories influshwithwallwith150mmx100mmx113mmTW switchboxwith3mmthickhylemsheet for15A3pinnon inter lockingwall socketwith15Aflushtypeswitchwith continuousearthwireconnectionof 4sq.mmcopperwireandmakinggoodof theconcealedportionwithsuitable colour for concealed power plug point

Supplyandrunof2x1.5sq.mm. PVCinsulatedSCunsheathedFRLScopperconductorof1100Vgradein25mmdia GI pipe (Class 'B') suitably bent at both ends with necessary angle iron upright and end supports for mains

Earthing as per PWD standard with an earth electrode of 2m class B GI Pipe of diameter not less than 32mm complete with necessary manosanry work

Supplyand fixingof TNEBmeter boardsuitable for 32Athreephaseserviceconnectionwith3Nos. 32A fuseunit (500V)32Aneutral linkandearth link(1"x1/8" copper flat)onTWplankof size600mmx450mmx19mmwith supportingTWreepersof1" thickaneithersidewithpaintingwithsuitableboltandnuts for fixingtheTWplankon wallwithearthconnectionandinterconnectionwith7/20PVCinsulatedcopperwirefromEBmetertofuseunitwith1 No 40 Amp 30 MA Four Pole RCD / RCCB (Lower End) with suitable necessary connection

Supply and fixing of single boxtype 4'20 W fluorescent fitting complete with electronic ballast with TW round blocks on wall or ceiling with flu tube with PVC unsheathed FRLS Copper leads from terminals to the fitting

Supply and fixing of 16amps Dp switch with metal clad of 500V with F&N on suitable teak wood board of size 30cmx20cmx6cm including necessary internal connection etc.,

Supply and run of No.8 SWG Copper wire for guarding with cradle with No.8 SWGGI wireat the equal interval of1.5 metre

Supply and fixingof 4way three phase DB of 16 amps Dp enclosure distribution board with doubledoor (metal)1No.32ADPMCBas incoming and6Nos.6Ato32ASPMCBoutgoing inflush withwall and makinggoodof the concealed portion with earth connection only. The MCB DB and MCB's should be with ISI mark (like standard make)

Supply and fixing of 8 way three phase DB of 16amps/way with 16amps DP Switch with metal gald of 500 volt fuse and neutral of suitable TW Board of size 40cm x 30cm x 6.3cm with earth connection only.

Supply and fixing of5A/15A3 pin combined flush type wall socket with15Aflushtype switchconcealedinsuitableMS box in flush with wall and covered with 3mm thick hylem sheet

Supply and fixing of5A/15A3 pin combined flush type wall socket with15Aflushtype switchconcealedinsuitableMS box in flush with wall and covered with 3mm thick hylem sheet

Supply and fixing of 20mm Amp DP Plug and socket in sheet enclosure with 32A DP MCB in flush with earth connection

Supply and fixing of 20 Aflush typeWall Socket 32ADPMCBcompleteset forACPlug influshwithwallwithearth connection

supply and fixing of 60W LED street light fitting with LED (Lower end) with 32mm dia. GI pipe (class B) with 1 no.32 mm GI bend complete on the existing post/ on wall with PVC unsheathed copper leads with MS clamps and with painting .

Supplying and fixing 63 A TPNMC switch on suitable angle iron frame work with MS cable entry boxes with earth connection only

Supply and run of 4 of 2.50 sq.mm. PVC insulated SC unsheathed copper conductor of 1100V grade in suitable heavy gaugeMSconduitpipeonwallandceilingwithcontinuousearth wire connection of 4sq.mm copperwire with painting of suitable colour.

Supply and run of 2 of 4sq.mm. PVC insulated SC unsheathed FRLS copper conductor of1100 Von 7/20 GI bearer wire for service connection mains.

Supply and run of 2 of 4sq.mm. PVC insulated SC unsheathed cu conductor of 1100 grade in 25mm dia GI pipe (class B) suitably bent at both ends with necessary angle iron upright and end supports for main.

Supply and fixing of 3nos of 100A porcelain fuse units 500 Volts of approved brand having ISI mark in TW Board of suitable size etc., complete in all aspects.

Supply and fixing of 32A Fuse units on suitable TW board with necessary internal connections for controlling the power plug.

Supply and run of 4 of 4sq.mm. PVC insulated SC unsheathed FRLS copper conductor of 100V gradeon 7/20 GI bearer wire for service connection mains

ROLLING SHUTTERS (WITH ISI MONOGRAM) Supplying and Erecting Pull and Push Type Rolling Shutter with ISI make of approved size and section using 18 GI sheet. The shutter shall be painted with one coat of red oxide primer and the rate is inclusive of hood covers, transportation charges etc

Supplying and fixing of 2000 litres capacity PVC Tank of approved quality including cost of all materials like tank fittings , lead lift ,erection etc complete .

Supplying and fixing of Gun Metal Gate Valve (Heavy Duty) with ISI mark of the following sizes including cost of shellac therad ETC.,

25mm Gun Metal Gate Valve

32mm Gun Metal Gate Valve

Supplying PVC Specials (with working pressure 10Kg /for water supply arrangements For Water Supply arrangement items of works, only PVC Pipe of working pressure of 10 kg. per sq.cm. shall be adopted.

Coupler 25mm pipe

Coupler 32mm pipe

Elbow

25mm pipe

32mm pipe

25mm pipe

32mm pipe

25mm pipe

32mm pipe

End cap

25mm pipe

32mm pipe

Reducer

25mmx20mm

32mmx25mm

Reducer Tee

25mmx20mm

32mmx25mm

Reducer Elbow

25mmx20mm

32mmx25mm

Jet Nipple

25mm Pipe

32mm Pipe

Supplying and fixing in position best quality approved make white glazed earthenware wash hand basin of size 550 X 400 mm with a pair of cast iron brackets, including cost of 15mm diametre brass chromium plated piller tape,32 mm diametre C.P. Waste union, 32 mm diametre P.V.C. waste pipe with rubber plug and chain, 15mm diametre G.M.wheel valve, 15mm dia brass nipple, 15mm dia nylon connections etc., including fixing the wash hand basin in the wall in position with a pair of C.I. brackets with teak wood plugs and screws and giving necessary water supply connection and paintiung the brackets with two coats of paint over a primimg coat of anticorrosive paint including testing for leackage etc., complete complying with standard specifications (D)

Supplying and fixing in position White / Colour Glazed Model Floor Mounted European Water Closet of best quality and approved make with 100mm “P” or “S” trap connecting with CI pipe of 100mm dia / PVC pipe of 110mm dia, double flapped rigid PVC black seat and seat cover with CP brass hinges including cost of white cement, cement for packing, spun yarn, teak wood plugs, brass screws, etc., including supplying and fixing 10 liters capacity PVC / 12.5 liters capacity porcelain low level flushing tank with a pair of CI brackets, etc., complete with all fittings, such as, 15mm brass ball valve with polythene float with brass handle, union coupling connected by means of 40mm white PVC flush hand using Indian adopter joint including all internal fittings, such as, 15mm bras connections, 15mm GM wheel valve, 15mm brass nipple (2 Nos.), 15mm nylon connection, TW plugs, screws and also giving necessary connection to the PVC pipe and painting the CI brackets with 2 coats of approved paint over one coat of red oxide primer, dismantling the masonry and re-doing the dismantled masonry to original condition, etc., complete complying with standard specifications. (The EWC and flushing tank with all accessories should be got approved by the Executive Engineer before use on works) Floor Fitting

S/F in position of Indian Make White/Colour glazed earthen ware lipped mouth Flat Back Urinal of best approved quality with G.I.Pipe connection to suitable length,32mm bell mouthed P.V.C connection ,15mm dia G.M.Wheel valve,fixing the urinal to the wall in position with necessary T.W.plugs ,clamps,screws, shellac etc.,including dismantling masonry if necessary and redoing the same to original condition ,fixing the 15mm dia. G.I.pipe connection and wheel valve ,painting the pipe with two coats of approved paint over one coat of primer and checked without any leakage complete, complying with standard specifications. - White Colour

supplying and fixing in position Indian water closet of size 580 X 440mm, white glazed earthen ware of approved quality with 'P' trap or 'S' trap confirming to IS:2556 - Part XII with sand cushion and forming flooring alround the closet using 40mm broken brick jelly in lime concrete 1:2:5 ( one part of lime, two parts of sand and five parts of brick jelly) 100mm thick and finishing the top to required slope and including giving necessary connection to cast iron soil pipes/ PVC pipes by dismandling brick masonry, reinforced cement concrete roof/floor slab and making good the disturbed portion to original condition without leakage etc., complete complying with standard specifications and as directed by the departmental officers.

KONGU CONSTRUCTION AND CONTRACTORS (BID ID -1369448)