NIT-32 of 19-20 REPAIR / MAINT OF STEEL / WOODEN FURNITURE OF VARIOUS UNITS AT BHALRA, PATNITOP, NATHATOP, RAMBAN AND BANIHAL UNDER GE (I) 873 EWS

Amount

ALMIRAH LARGE /MEDIUM STEEL WITH SHELVES (FD-67, 1031 &1032)

Replacement of old existing broken / unserviceable Lock of any description and in any position with new locks, six lever with double keys, fixing with suitable nuts including repair of locking device , complete all as specified and directed. Make : Godrej / Harrison / Link

Replacement of old existing broken / unserviceable door handle of Almirah with new door handle of size 100mm long, cast iron chromium plated of approved make fixed with suitable nuts and pins, complete all as specified and directed.

Replacement of old existing broken / unserviceable Leg of Almirah with new Leg made out of 1.0mm mild steel sheet including welding of legs where required, complete all shown in drawing and as directed.

Taking out unserviceable Steel Clamp and supply and fixing new steel clamp made out of MS sheet 3.00mm thick of size 50mm x 20mm including fixing of loose shelves, complete all as specified and as directed.

Replacement of old damaged / unserviceable Shelf of Almirah Large with new shelf made out of 1.0mm thick mild steel sheet of size 0.765m x 0.44m with suitable clamps as shown in drawing duly painted with two coat of synthetic enamel paint Olive green colour over a coat of red oxide primer with spray gun stove enamel paint, finish to the required shade, complete all as shown in drawing and as directed.

Replacement of old damaged / unserviceable shelf of Almirah Medium with new shelf made out of 1.0mm thick mild steel sheet of size 0.765m x 0.44m with suitable clamps as shown in drawing duly painted with two coat of synthetic enamel paint Olive green colour over a coat of red oxide primer with spray gun stove enamel paint, finish to the required shade, complete all as shown in drawing and as directed.

Replacement of unserviceable Locking Device of Almirah Large / Medium Steel with new locking device, complete all as shown in drawing and as directed.

BED WITH PLY TOP (FD-246)

Replacement of unserviceable / damaged Long Rail from Bed with ply top with new long rail made of seasoned hard wood Sheesham, size 1980mm x 90mm x 35mm matching with existing shape and size, complete all as specified and directed.

Replacement of unserviceable / damaged Head Board with new head board of size 0.90mm x 0.46m made of ply wood commercial, 4.0mm thick, one side teak faced, duly covered with 4mm thick teak wood beading all around, complete all as shown in drawing and as specified and directed. Make of Ply : Kitply / Green Ply / Century / Dura Ply

Replacement of unserviceable / damaged Foot Board from Bed with ply top with new footboard made of ply wood commercial, 4mm thick and one side teak faced, duly covered with 4mm thick teak wood beading all around, complete all as shown in drawing and as specified and directed. Make of Ply : Kitply / Green Ply / Century / Dura Ply

Replacement of unserviceable Legs from Bed with ply top with new legs made of seasoned hard wood complete all as shown in drawing and as specified and directed.

Replacement of unserviceable Ply Top and stiffener from Bed with Ply Top with new ply wood top commercial, 12mm thick of size 900mm x 1980mm, exterior grade BWR including seond class hardwood stiffener provided at bottom of ply wood, complete all as shown in drawing and as specified and directed. Make of Ply : Kitply / Green Ply / Century / Dura Ply

BOOK CASE (STEEL) 840mm x 1675mm x 305mm having 04 Compartments (FD-90)

Replacement of old damaged / broken Top Hung Shutter with glass of Book Case with new Top hung shutter with glass made of 1.0mm mild steel sheet and suitable clamp as shown in drawing and all steel and iron surfaces shall be painted with two coats synthetic enamel paint over a coat of primer after preparation of surfaces finished to the required shade, complete all as shown drawing and as directed.

Replacement of old existing broken / unserviceable Lock of any description and in any position with new locks, six lever with double keys, fixing with suitable nuts, complete all as specified and directed. Make : Godrej / Harrison / Link

Replacement of old existing broken / unserviceable Handle of Book case with new aluminium handle of 100mm long of approved make duly fixed with suitable nuts and pins, complete all as specified and directed.

BATH MAT WOODEN (FD-254)

Replacement of old existing broken / unserviceable Battens from Bath Mat and replacing it with new battens made out of seasoned teak wood 50mm x 20mm duly fixed with screw wood brass of appropriate size and guage as shown on drawing. Battern shall be painted with two coats of synthetic enamel white paint over a coat of primer complete all as specified and directed.

Replacement of old existing broken / unserviceable Base of wood support from Bath Mat and fixed with new bases of seasoned teak wood 65mm x 25mm shall be fixed with screw wood brass of appropriate size and guage as shown on drawing. Bases shall be painted with two coats of synthetic enamel white paint over a coat of primer complete all as specified and directed.

CHAIR CB STEEL WITH ARMS (FD-75)

Materials and labour for Welding to damaged / decayed steel frame of chair CB Steel with Arms complete all as directed.

Supply and fixing 15mm x 3mm Flat Iron of length 0.49m to bottom of steel frame in support of wooden Seat Frame duly welded to steel frame as specified and as directed.

Taking out old damaged / decayed Arm Rest from its position and supply and fixing new arm rest made out of size 0.05m x 0.030m x 0.42m well seasoned teak wood fixed in the same position with new screws as per existing shape and size complete all as specified and as shown on drawing and as directed.

Taking out old damaged / decayed Seat Frame from its positoin and supply and fixing new seat frame made of well seasoned teak wood duly weaving with new plastic cane white colour half round (oval type) 2mm wide and 4mm wide for border complete all as specified and as shown on drawing and as directed.

All as per the description of Serial Item No 5.04 here-in-before but Back Frame of Chair CB steel with Arms complete all as specified and as shown on drawing and as directed.

Taking out old unserviceable Top Cap from its position and supply and fixing new plastic top cap best quality in the same position complete all as directed.

Material and labour for painting Frame of Chair CB Steel with Arms with one coat of olive green synthetic enamel paint after preparation of steel surfaces complete all as specified and as directed.

Materials and labour for polishing to Seat / Back and Hand Rest with black French polish glossy finish after preparation of wooden surfaces complete as specified and as directed.

CHAIR TUBULAR STEEL WITHOUT ARMS (FD-75)

Materials and labour for welding to damaged / decayed Steel Frame of Chair CB Steel without Arms complete all as directed.

Supply and fixing 15mm x 3mm length 0.41m Flat Iron to bottom of steel frame in support of wooden seat frame duly welded to steel frame all as specified and as directed.

Taking out old damaged / decayed Seat Frame from its positoin supply and fixing new seat frame made of well seasoned teak wood of size with total length 1.60m x 0.025m thick and 0.035m wide duly weaving with new plastic cane white colour half round (oval type) 2mm wide and 4mm wide for border complete all as specified and as shown on drg.

All as per the description of Serial Item No 6.03 here-in-before but but Back Frame of chair CB Steel without Arms.

Taking out old unserviceable Top Cap from its position and supply and fixing new plastic top cap best quality in the same position complete all as directed.

Material and labour for painting Frame of Chair CB Steel without Arms with one coat of olive green synthetic enamel paint after preparation of steel surfaces complete all as specified and as directed.

Materials and labour for polishing to Seat / Back and Hand Rest with black French polish glossy finish after preparation of wooden surfaces complete as specified and as directed.

CHAIR EXCUTIVE WITH CUSHION AND ARMS (VISITOR) (TP)

Replacement of old existing unserviceable Seat and Back from chair executive with new seat & back made out of ply wood & foam cushion cover with superior crap fabric in Hans Pattern shall be fixed on the frame with 08 nos steel screw and washers of adequate size as per sample, complete all as specified and directed.

Replacement of old Plastic Arms (PP Arms) from chair with new Plastic Arms (PP) fixed with 02 Nos Nuts and washers, complete all as specified and directed.

Materials and labour for welding to damaged / broken flat iron 25mm x 6mm thick length 0.48m duly welded beneath the seat frame shall be painted two coat of synthetic enamel paint (black colour) including preparation of steel surface all as directed.

CHAIR EXECUTIVE REVOLVING (TP)

Removing / taking down old existing broken base stand of Chair Revolving of any type and Supply and Fixing new Base Stand of chair revolving complete with hydraulic system, fixed all as shown on drawing and as directed.

Replacing Tapestry cloth from Seat and Back of chairs with new tapestry cloth of approved quality and shade including replacement of foam cushion of density 40 Kg/Cum, 100 mm thick 6mm thick pressed and plywoood of size 530 mm x 470mm etc., as required, including painting, repair, welding and re-adjustment of chair as per trade pattern complete all as directed. Make : Leezy or equivalent as approved by GE.

Replacement of unserviceable Hand Rest from chair (Executive) with new hand rest of size 700mm x 50mm x 20mm of different type as per trade pattern matching with the existing hand rest, complete all as directed.

Replacement of unserviceable twin wheel Castor from chair executive with new twin wheel castors per sample complete all as directed.

CHAIR WRITING (FD-250 & FD-280)

Replacement of old unserviceable / damaged Rear Leg from Chair Writing with new legs made of seasoned teak wood matching with the existing shape and size, complete all as shown in drawing and as directed.

Replacement of old unserviceable / damaged Front Leg from Chair Writting with new legs made out of well seasoned second class teak wood matching with the existing shape and size 0.685m x 0.030m x 0.055m, complete all as shown in drawing and as directed.

Replacement of old unserviceable / damaged front / back / side Rail from chair writing with new front / back / side rail made out of well seasoned teak wood of size 0.535m x 0.025m x 0.020m matching with the extsting shape and size, complete all as shown in drawing and as directed.

Replacement of old unserviceable / damaged Stiffeners from Chair Writing with new stiffeners made of seasoned teak wood size 0.535m x 0.025m x 0.020m matching with the existing shape and size, complete all as shown in drawing and as directed.

Replacement of old unserviceable / damaged Hand Rest from chair writing with new hand rest made of seasoned teak wood of size 0.535m x 0.025m x 0.020m matching with the existing shape and size, complete all as shown in drawing and as directed.

Recanning of chair writing with 2.0 mm wide, half round white plastic cane and perimeter canning with 4.0mm cane including supply of new cane, complete all as shown in drawing and as directed. Make : Shah / Premier

Polish of best quality to the chair writing including preparation of surface, complete all as shown in drawing and as directed.

CHAIR DINING (FD-279)

Replacement of unserviceable Rear Leg from chair dining with new rear leg of seasoned teak wood of size 0.89m x 0.030m x 0.055m matching with the existing shape and size, complete all as specified and directed.

Replacement of unserviceable Front Leg from chair dining with new front leg of seasoned teak wood of size 0.46m x 0.080m x 0.055m from chair dinning with new front leg of seasoned teak wood matching with the existing shape and size, complete all as specified and directed.

Replacement of unserviceable front / back / side Rail from chair dining with new front / back / side rail made out of well seasoned teak wood of size 0.430m x 0.030m x 0.065m matching with the existing shape and size, complete all as specified and directed.

Replacement of unserviceable Stiffeners from chair dining with new stiffeners made of size 0.44m x 0.025m x 0.020m made out of well seasoned teak wood matching with the existing shape and size, complete all as specified and directed.

Re-canning of Chair Dining with 2 mm wide half round white plastic cane and perimeter canning with 4 mm cane as shown in drawing including supply of new cane as required, complete all as specified and directed. Make : Shah / Premier

French Polish of best quality to the chair dining with arms including preparation of surface complete all as specified and directed.

SLEEPING BUNK COMPLETE 1850 x 945mm WITH STEEL FRAME (SINGLE BUNK)

Replacement of unserviceable / damaged Plywood Top from its position with new plywood top 1850mm x 945mm x 12mm thick, BWR grade including 20mm x 25mm teak wood beading shall be provided in all sides at bottom of the plywood and one stiffener of size 20 x 25mm shall be provided in middle at bottom as shown in drawing, complete all as specified and directed. Make : Kitply / Green Ply / Century / Dura Ply

DOUBLE BUNK CHARPOY STEEL (FD-112)

Replacement old existing broken / unserviceable ply wood from double bunk charpoy with new ply wood commercial, 12mm thick, exterior grade BWR of size 1.80m x 0.90m including 25mm x 25mm teak wood beading provided at the bottom of ply wood, complete all as specified and directed. Make : Kitply / Green Ply / Century / Dura Ply

FORM WITHOUT BACK STEEL (FD-1027)

Taking out unserviceable Top (wooden plank) from form without back steel with new top made of second class sheesham wood plank of size 1900mm x 255mm x 25mm including polishing the wooden plank and painting of the steel frame, with two coats of synthetic enamel paint over a coat of red oxide primer complete all as shown in drawing and as directed.

PEG TABLE (FD-236, 277)

Replacement of old unserviceable /damaged top of table peg with new Top made of pre-laminated particle board of size 0.45m x 0.30m one side teak face exterior grade BWR 18mm thick duly covered with 4mm thick teak wood beading all around the top including polishing of the table complete all as shown in drg and as directed. Make : Kitply / Green Ply / Century

PAINTING OF STEEL FURNITURE Painting of following steel furniture items by providing two coats of synthetic enameled paint of OG / Black / Smoke Gray to match with existing shade with spray gun after properly smoothing the surface with sand paper and applying putty and primer including minor welding / denting etc. where necessary all as directed. Make of Paint : Nerolac / Berger / Asian

Rack Adjustable Steel closed type 900mm x 1875mm x 500mm having 6 shelves

Rack Folding 460mm x 300mm x 120mm (Chest of Drawer)

Steel Locker of size 830mm x 480mm x 1900mm (Locker Bed Side Steel Large)

Rack Steel 6 tier Adjustable (FD-1038, 1039 & 103)

Trestle Store Room Steel (FD-1043)

Rack Steel with Tray (FD-97 & 1023)

Rack Steel without Tray [FD-97(M)]

SAFE MEAT AND MILK (FD-47)

Replacement of unserviceable Marble Top of size 900mm x 600mm and old wire mesh from Safe Meat and Milk with new marble top 18mm thick and new wire mesh of 1.00 mm mesh and of 20 gauge including unserviceable hasp and staples, handles with new 75mm long aluminum hasp and staple, 100 mm long aluminum handle including repair and re-adjustment. Removing all scratches and filling with putty and painting with two coats synthetic enamel white paint of approved quality on internal and external surface, complete all as specified and directed.

TABLE DINING FOR 06 PERSONS (FD-30, 273, 376)

Supply and fixing top of the table 18mm thick, exterior grade in natural teak wood shade shall be prelaminated particle board, 4mm thick teak wood edging all around duly french polished including taking down old unserviceable top complete all as specified and as directed. Make of Prelaminated Particle Board : Kitply / Green Ply / Century

Supply and fixing Legs of size 0.040m x 0.075m x 0.76m made out of well seasoned teak wood as per drawing duly French polished after preparation of the wooden surface including taking down old unserviceable legs complete all as specified and directed.

Supply and fixing Long Rail of the table of size 1.50m x 0.045m x 0.09m made out of well seasoned teak wood as per drawing duly French polished after preparation of the wooden surface including taking down old unserviceable long rail complete all as specified and directed.

Supply and fixing Short Rail of the table size 0.90m x 0.045m x 0.09m made out of well seasoned teak wood as per drawing duly French polished after preparation of the wooden surface including taking down old unserviceable short rail complete all as specified and directed.

Supply and fixing of teak wood corner of size 75mm x 75mm to the table between legs and rail fixed with screw complete including taking down old unserviceable corner complete all as specified and directed.

TABLE DINING FOR 08 PERSONS (FD-30, 273, 376)

Supply and fixing top of the table 18mm thick, exterior grade in natural teak wood shade shall be prelaminated particle board, 4mm thick teak wood edging all around duly french polished including taking down old unserviceable top complete all as specified and as directed. Make of Prelaminated Particle Board : Kitply / Green Ply / Century

Supply and fixing Legs of size 0.040m x 0.075m x 0.76m made out of well seasoned teak wood as per drawing duly French polished after preparation of the wooden surface including taking down old unserviceable legs complete all as specified and directed.

Supply and fixing Long Rail of the table of size 1.80m x 0.025m x 0.10m made out of well seasoned teak wood as per drawing duly French polished after preparation of the wooden surface including taking down old unserviceable long rail complete all as specified and directed.

Supply and fixing Short Rail of the table size 0.90m x 0.025m x 0.10m made out of well seasoned teak wood as per drawing duly French polished after preparation of the wooden surface including taking down old unserviceable short rail complete all as specified and directed.

Flat iron of size 25mm x 3mm, 200mm long benT to shape at right angle shape corner at the junction of top rail meeting with leg complete all as specified and directed.

TABLE OFFICE OFFICER STEEL (FD-84, 1003)

Repair to Table Office Officer Steel by dismantling / removal of all broken parts and replacing with new parts. The Table Top shall be pre laminated particle board 18mm thick of size 1.22m x 0.61m, exterior grade, in natural teak shade and other side white with PVC beading edging all around. Drawer shall be repaired and should be made smoothly functioning. All steel surface of table shall be painted with two coats synthetic enamel paint of existing shade with spray gun after properly smoothening the surface with sand paper and applying putty and primer where necessary. Hard rubber PVC shoe (04 Nos) shall be provided for legs complete all as specified and directed. Make of Particle Board : Kitply / Green Ply / Century

TABLE OFFICE CLERK STEEL (FD-84, 1004)

Repair to Table Office Clerk Steel including dismantling / removal of all broken parts and replacing with new parts. Table Top shall be pre laminated particle board 18mm thick of size 1.22m x 0.61m, exterior grade, in natural teak shade and other side white with PVC bead edging all around. Drawer shall be repaired and should be made smoothly functioning. All steel surface of table shall be painted with two coats synthetic enamel paint of existing shade with spray gun after properly smoothening the surface with sand paper and applying putty and primer where necessary. Hard rubber PVC shoe (04 Nos) shall be provided for legs complete all as specified and directed. Make of Particle Board : Kitply / Green Ply / Century

TABLE DINING ORs (FD-165)

Repair to Table Dinning ORs by dismantling / removal of unserviceable existing Top and replacing with 18mm thick particle board commercial BWR duly covered with 24 G aluminium sheet. The Top shall be fixed on the frame with steel screws. Steel frame of the table shall be painted with two coats of synthetic enameled paint over one coat of the pink primer, complete all as specified and directed. Make of Particle Board : Kitply / Green Ply / Century

Replacement of unserviceable Rubber Shoes from legs of table dining ORs and supply and fixing new Rubber shoe of best quality, matching with existing shoe, complete all as specified and directed.

TABLE WRITING (FD-33, 249 & 275)

Replacement of unserviceable Top from table writing with new top made of pre-laminated particle board of size 1.145m x 0.60m with one side teak face exterior, grade BWR, 18mm thick, duly covered with 4mm thick teak wood beading all around, complete all as shown in drawing and as directed. Make : Kitply / Green Ply / Century .

Replacement of unserviceable Leg from table writing with new leg made of seasoned teak wood size 0.76m length and 0.045m x 0.045m at top and 0.025m x 0.025m at bottom matching with the existing shape and size, complete all as shown in drawing and as directed.

Replacement of unserviceable Front / Back Rail from table writing with new front/back rail made of seasoned teak wood of matching with existing shape and size 1.145m x 0.025m x 0.050m, complete all as shown in drawing and as directed.

Replacement of unserviceable centre Stiffener from table writing with new centre stiffener made of seasoned teak wood of size 0.45m x 0.615m, complete all as shown in drawing and as directed.

Replacement of unserviceable back Plywood from box of table writing with new back plywood made of 6mm thick, commercial, exterior, grade BWR, complete all as shown in drawing and as directed by Engineer-in-Charge. Make : Kitply / Green Ply / Century / Dura Ply

Replacement of unserviceable shutters from table writing with new shutters made of pre-laminated particle board 18mm thick, grade BWR, one side teak faced, duly covered 4mm thick teak wood beading all around the shutters including piano type hinges, knob and six lever brass lock with duplicate keys of best quality, complete all as shown in drawing and as directed by Engineer-in-Charge. Make : Kitply / Green Ply / Century

Replacement of unserviceable Drawers from table writing with new drawers made of 12mm thick teak wood, except bottom of drawers which shall be of 6mm thick plywood, comercial exterior, grade BWR including knob etc, complete all as shown in drawing and as directed.

Polish of best quality to the table writing including preparation of surface with sand paper, complete all as shown in drawing and as directed.

TEAPOY WOODEN (FD-34, 232 & 278)

Replacement of old unserviceable Top from Teapoy Wooden with new top made of pre-laminated particle board, one side teak faced, exterior grade BWR, 18 mm thick, duly covered with 4mm thick teak wood beading all around the top, complete all as shown in drawing and as directed. Make : Kitply / Green Ply / Century

Replacement of old unserviceable / damaged Legs from teapoy wooden with new legs made of seasoned teak wood including rubber shoe at the bottom of legs, matching with the existing shape and size, complete all as shown in drawing and as directed.

Replacement of old unserviceable / damaged front / back Rails from teapoy wooden with new front / back rails made of seasoned teak wood matching with existing shape and size, complete all as shown in drawing and as directed.

Wooden Polish of best quality to the Teapoy wooden including preparation of surface, complete all as shown in drawing and as directed.

TABLE DRESSING GENTS WITH MIRROR

Replacement of mirror with frame of table dressing gents and fixed with new 410mm x 790mm x 5.5mm thick mirror of Modiguard shall be fixed on 6mm thick plywood backing. The mirror and plywood backing shall be enclosed in the teak wood frame of 20mm x 25mm shape as shown on drawing, complete all as specified and directed. Make of Mirror : Modiguard / Sant Gobain Make of Plywood : Kitply / Green Ply / Century / Dura Ply

CHAIR EASY (FD-229) Repair to Chair easy including removal of all broken parts and replacing with new parts and replacing with new parts of well seasoned first class hard wood teak duly French polished as under :-

Supply and fix Rear Legs of size as per drg No FD-229

Supply and fix Front Legs of size as per drg No FD-229

Supply and fix front and Rear Rail of size as per drg No FD-229

Supply and fix Side Rail of size as per drg No FD-229

Supply and fix Stiffeners of size as per drg No FD-229

Supply and fix Arm Rest of size as per drg No FD-229

Re-canning of chair easy with 2.0 mm wide, half round white plastic cane and perimeter canning with 4.0 mm cane including supply of new cane, complete all as shown in drawing and as directed.

Supply and and fix hard rubber ring / PCS toes to bottom of legs with screws, complete all as specified and directed.

CHAIR VERANDAH (FD-256)

Materials and Labour for painting of chair verandah with one coat of white synthetic enamel paint after preparation of steel old surfaces complete all as specified and as directed.

Re-canning of chair verandah with white plastic cane and perimeter as shown in drawing including supply of new cane as required, complete all as specified and directed. Make : Shah / Premier

STEEL LOCKER OF SIZE 830 X 480 X 1900mm (TP) MADE OF SHEET TWO DOOR WITH TWO HANDLES

Replacement of old existing broken / Un-serviceable Locks of any description and in any position with New locks, 6 lever with double keys, fixing with suitable nuts including repair of locking device complete all as specified and directed. Make : Godrej / Harrison / Link

Replacement of old existing broken / Un-serviceable door handle of steel locker 100mm long Cast Iron chromium plated of approved make, with nuts and pins, complete all as specified and directed.

Replacement of old existing broken / unserviceable Legs of Steel Locker and new Legs made out of 1.0mm mild steel sheet including welding of legs where as required, complete all shown in drg and as directed.

Replacement of old existing broken / Un-serviceable looking mirror from its position with new morror of 5mm thickness and size 700mm x 280mm, complete all as specified and directed. Make : Modiguard / Sant Gobain / M/S Atul Glass Industries

RACK STEEL 6 TIER (FD-103, 1038 & 1039)

Supply and fixing of shelves made of 1mm thick PBI sheet made to shape as per drg and directed.

Cleaning and preparing surface for Gas welding of the broken of any steel furniture. Welding shall be done in best trade practice and running welding upto 100 mm shall be treated one point all as specified and directed.

Supply and fixing of nuts and bolts of shelves to fix with angle iron where required as per drawing and directed.

RACK STORE / DOUBLE BUNK COMPLETE SIZE 1655mm x 1950mm / 1855mm x 1935mm

Replacement of unserviceable / damaged plywood top from its position with new plywood top 1655 x 1950mm / 1855mm x 1935mm x 12mm thick, BWR grade including 20mm x 25mm teak wood beading shall be provided in all sides at bottom of the plywood and one stiffener of size 20 x 25mm shall be provided in middle at bottom as shown in drawing, complete all as specified and directed. Make : Kitply / Green Ply / Century / Dura Ply

TEAPOY VERENDAH (FD-383)

Removing of unserviceable conduit and provide new round conduit of mild steel including fixing legs / frame where required, all as shown on drawing and as directed.

Gas welding to joint of tubular frame where required completes one spot of 10cm, all as directed.

Removing unserviceable Table Top and supply and fixing of new top made of 18 mm thick prelaminated particle board , exterior grade, teak wood beading to be provided around the top as per trade practice, all as directed. Make : Kitply / Green Ply / Century

Painting of Teapoy Verandah steel with synthetic enamel paint of White Paint colour including prepration of surface with sand paper applying putty where necessay complete all as specified and directed.

CABINET FILING 4 UNIT WITH LOCK

Repair to cabinet filing 4 unit including dismentaling / removal of all unserviceable/ broken Parts and replacing with new Parts. Drawer shall be made smoothly functioning including dismantaling /removal of unserviceable/ broken drawer and replacing with new drawer. Replacement of old existing unserviceable Locks of any description and in any position and fixing with suitable new locks with double key. All surface of Cabinet filing 4 unit shall be painted with two coats synthetic enamel paint of existing shade with spray gun after properly smoothening the surface with sand paper and apply putty and primer where necessary, complete all as specified and directed.

SOFA SET FIVE SEATER (FD-258 & 281)

M&L for replacement of unserviceable cushion with new seat cushion of foam density of 32 Kg/Cum, 530 mm x 560 mm size, 100 mm thick, covered with tapestry cloth of colour as approved. Make : Sleepwell / Kurlon

CHARPOY GI PIPE (FD-220)

Taking out old unserviceable long rail from three way elbow by unscrewing and replacing with new Long rail of GI pipe 32mm bore, medium grade, duly threaded both end to the required size fitted to the frame, complete all as specified as shown on drawing and as directed. Make : Jindal / Prakash Surya / Tata

Taking out old unserviceable short rail from three way elbow by unscrewing and replacing with Short Rail of GI pipe made out from long rail retrieved under Serial Item No. 33.01 here-in-before duly threaded both ends to require size fitted to the frame, complete all as specified and as shown on drawing and directed.

Taking out old unserviceable leg from three way elbow by unscrewing and replacing with Leg of GI pipe made out of short rail retrieved under Serial Item No. 33.02 above duly threaded to require size fitted to the frame, complete all as specified and as shown on drawing and directed.

Taking out old unserviceable / broken GI check nut from the frame by unscrewing and replacing with new check nut GI 32mm bore as per sample kept in BSOs office, complete all as specified and as shown on drawing and directed.

Taking out old unserviceable / broken three way elbow from GI pipe charpoy by unscrewing and replacing with new three way elbow GI 32mm bore/dia 'ISI marked', complete all as specified and as shown on drawing and directed.

VARDHMAN INTERNATIONAL

TULSI RAINA AND SONS

M/S BAIJ NATH AND SONS

Bidder Name

VARDHMAN INTERNATIONAL

VEE KAY IND

TULSI RAINA AND SONS

M/S BAIJ NATH AND SONS