SPECIAL REPAIRS TO UTILITY HALL BLDG NO P-21 AT USMAN LINE CHENNAI UNDER GE STM

Amount

S & F in repair vitreous china wash down water closet (pedestal pattern) , white, of style and pattern as existing, complete with and including plastic seat cover, white fixed complete all as specified and as directed.

S & F in repairs chromium plated cascade health faucet with minimum 1200mm long pipe of fancy type complete all as specified and as directed.

S & F in repairs PVC, syphonic action type, flushing cistern, low level, white, 10 litres, with inlet ball valve, float, handle and 32mm dia flush pipe including brackets complete all as specified and as directed.

S & F in repairs Bib taps 15mm bore cast copper alloy with crutch or butter fly handle chromium plated screwed down for iron pipe or for brass ferrule fixed complete all as specified and as directed.

S & F in repair stop valves15 mm bore chromium plated with long shank and cup (Concealed type) high pressure with crutch or butterfly handle screwed both ends for iron pipe or for unions and fixed complete all as specified and as directed.

S & F in repair Pillar taps 15mm, cast copper alloy with capstan heads, CP fancy type, screwed down high pressure with long screwed shanks and flynuts screwed for iron pipe and fixed complete all as specified and as directed.

S & F in repair CP brass shower rose 125mm size suitable for 15mm bore pipe complete all as specified and as directed.

S & F sheet glass shelf assembly consisting of 5.5mm thick sheet glass shelf 12cm wide with CP bracket guard and railing 60cm long complete all as specified and as directed.

M & L toilet paper holder with flat recessed type stainless steel complete all as specified and as directed.

S & F Vitreous China wash basin flat back, white, size 550 x 400mm embedded on marble platforms including cutting for and pinning in ends of brackets or erecting stand brackets, 32 mm Waste coupling of PTMT (half or full threaded) (Minimum weight 32mm-45gms /40mm-60 gms & waste pipe including taking down of old wash basin complete all as specified and as directed.

S & F in repairs PVC connection 15 mm size with PTMT nuts of length 600mm complete all as specified and as directed.

S & F in repairs Brass chromium plated Tubular towel rail, 20mm dia, D type, 30 cm long between flanges complete all as specified and as directed.

Supply and fix in repairs Vitreous China Urinal, Half stall type coloured complete fixing with suitable fixing arrangements to wall with and including CP urinal spreader, CP doom waste coupling and waste pipe complete all as specified and as directed.

Demolition and breaking up drain pipes any type set in cement mortar complete all as specified and as directed.

S & F 75mm bore PVC (SWR) pipes single socketed, in any length with rubber ring joints or solvent cement, laid in floor complete all as specified and as directed.

S & F 75mm bore PVC (SWR) pipes single socketed, in any length with rubber ring joints or solvent cement, fixed to walls complete all as specified and as directed.

S & F 110mm bore PVC (SWR) pipes single socketed, in any length with rubber ring joints or solvent cement, laid in trenches or in floors complete all as specified and as directed.

S & F 110mm bore PVC (SWR) pipes single socketed, in any length with rubber ring joints or solvent cement, fixed to walls complete all as specified and as directed.

S & F PVC (SWR) bend 110 mm bore complete all as specified and as directed.

S & F PVC (SWR) floor trap 75mm dia with grating including jointing to solvent cement complete all as specified and as directed.

S & F PVC (SWR) Gully trap 125 / 110mm setting and jointing with solvent cement complete all as specified and as directed.

S & F PVC (SWR) vent cowl 110 mm complete all as specified and as directed.

S & F 110mm bore PVC (SWR) junction single, (Single T) equal or unequal with access door complete all as specified and as directed.

S & F 75mm bore PVC (SWR) junction single, (Single T) equal or unequal with access door complete all as specified and as directed.

S & F 75mm bore PVC (SWR) bend complete all as specified and as directed.

S & F Grating doom 100mm dia of PTMT Minimum weight 25gms complete all as specified and as directed.

S & F Stack clamps out of 50 mm by 5 mm flat iron and 16mm dia round iron stays, including bolts and nuts and securing ends of stays to wall or roof Bore of pipe 110 mm complete all as specified and as directed.

S & F rotational moulded polyethylene water storage tanks of capacity 500 litres (cylindrical, vertical with closed top) three Layered, hoisted and fixed in position all as specified and including taking down old tanks complete all as specified and as directed.

S & F rotational moulded polyethylene water storage tanks of capacity 1000 litres (cylindrical, vertical with closed top) three Layered, hoisted and fixed in position all as specified including taking down old tanks complete all as specified and as directed.

S & F Ball valves 25 mm high pressure of PTMT with epoxy coated Aluminium rod & high-density plastic ball screwed for iron pipe and fixed complete all as specified and as directed. (Minimum weight 15mm-142gms/ 20 mm - 210 gms / 25mm-455gms/ 40mm - 690 gms)

S & F in repairs 25mm Gun-metal, globe or gate valves, with iron wheel head, screwed both ends for iron pipe complete all as specified and as directed.

S & F in repairs 50mm Gun-metal, globe or gate valves, with iron wheel head, screwed both ends for iron pipe complete all as specified and as directed.

Taking up or taking down steel/iron tube of 20 mm bore and connections including cleaning for refixing or removal to store complete all as specified and as directed.

Supplying and laying of 20 mm CPVC pipes SDR 11 & Plain CPVC SDR 11 fittings laid in walls / floors complete all as specified and as directed.

Taking up or taking down steel/iron tube of 25 mm bore and connections including cleaning for refixing or removal to store complete all as specified and as directed.

Supplying and laying of 25 mm CPVC pipes SDR 11 & Plain CPVC SDR 11 fittings laid in walls / floors complete all as specified and as directed.

Taking up or taking down steel/iron tube of 50 mm bore and connections including cleaning for refixing or removal to store complete all as specified and as directed.

Supplying and laying of 50 mm CPVC pipes SDR 11 & Plain CPVC SDR 11 fittings laid in walls / floors complete all as specified and as directed.

Demolition of cement concrete (unreinforced) in ground floors and pavings n.exc 15cm thickness below or above ground level complete all as specified and as directed.

Demolition of cement concrete (unreinforced) of any description and in any position not otherwise specifically provided for complete all as specified and as directed.

Demolition of brick work built in cement mortar including all precast concrete articles complete all as specified and as directed.

Dismantling of floor, hearth or wall tiling including cement mortor bedding (but not backing) and removig serviceable tiles to store and rubbish off the premises complete all as specified and as directed.

M & L for providing 25 mm thick Cement concrete type B-1,1:2:4 (20mm graded aggregate) complete all as specified and as directed.

M & L Non skid ceramic tiles 7 to 8 mm thick area of each tile exceeding 0.06 sqm but not exceeding 0.11 sqm in floors etc set and jointed in neat cement slurry and pointed in white or coloured cement to match as in coloured tiles over and including cement screed 15 mm thick in CM 1:4 complete all as specified and as directed.

M & L Non skid ceramic tiles 7 to 8 mm thick area of each tile exceeding 0.18 sqm but not exceeding 0.38 sqm in floors etc set and jointed in neat cement slurry and pointed in white or coloured cement to match as in coloured tiles over and including cement screed 15 mm thick in CM 1:4 complete all as specified and as directed.

Material and labour for glazed ceramic coloured tiles, 350X250x7 or 450 x 350 mm x7mm thick in vertical surfaces such as dado/ skirting etc set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including cement plaster 10mm thick in CM 1:3 complete all as specified and as directed.

M & L for brick work with fly ash bricks of size 230 x 115 x 75mm straight or curved on plan to any radius in half brick thick walls built in CM 1:4 complete all as specified and as directed.

M & L for providing lintels upto 1.5m clear span on half brick partition wall with cement concrete Type B1, 1:2:4 using 20mm graded stone aggregate including use of form work complete all as specified and as directed.

M & L for providing RCC 1:2:4 type B1 using 20mm graded stone aggregate as in slabs supported on walls, beams and columns in floors, roofs, landings, deck slabs and in shelves complete all as specified and as directed.

Use and waste of formwork to soffits of suspended slabs such as roof slabs, floor slabs, landings, shelvings and similar work not exc 200mm thick for fair finished flat surfaces complete all as specified and as directed.

M & L for 20mm thick Granite (of any type) work (table rubbed and polished) in steps, jambs, pillars, window- cills, cooking platforms and including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite including and over 15 mm thick screed in CM 1:4

S & F TMT steel bars 10mm dia and over, cut to length bent to shape required as in reinforce ment to lintels complete all as specified and as directed.

All as per item No 53 here in before above but 6mm to 8mm dia complete all as specified and as directed.

All as per item No 53 here in before above but 5mm dia and over upto and including 10mm dia in stirrups complete all as specified and as directed.

Taking down chowkats or frames with shutters (without taking off shutters from frames) area exc 1.5 Sqm but n.exc 4 Sqm each including making good disturbed surfaces complete all as specified and as directed.

All as per item No 56 here in before but area n.exc 1.5 Sqm each complete all as specified and as directed.

S & F Solid PVC door Frame of size 50mmX47mm made out of 5mm plain colour PVC sheet reinforced with M.S Square tube, suppling &fixing in opening as per spcification &drawing Note:- i)Existing wall edges will have to be finished properly in cement plaster 1:4 . including fixing of 6 Nos wooden plugs for catch door frame size not exc 17Sqcm average sectional areas and 100mm long. ( i)Frame will have to be fixed to the wooden plugs inserted in wall using 6 Nos of 100mm long MS screw, 3 each on either side. (ii)PCC strip of section 5*5mm will have to be created at bottom incl. smooth finish in each door opening complete all as specified and as directed.

S & F Factory Made Solid Panel PVC Door shutter 30mm thick (Style) consisting of frame made out of M S tubes for top & botom rails, M S frame shall be covered with heat moulded plain colour PVC 'C' channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles andplain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail and bottom rail and jointed together with solvent cement, supplying & fixing in frame at site as per specification & drawing complete all as specified and as directed.

S & F Anodised aluminium (minimum 50 micron) frame for doors, windows, ventilators, Partitions and grills/guard bars etc with one or more rebates including joining cleat for fixing etc.. complete all as specified and as directed.

S & F anodised aluminium window and ventilator shutters, side hung type (minimum 50 micron) without sash bar, aluminium section weighing 0.55 kg/m including necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws anodised aluminium fittings such as peg stays 150mm long (1 No), hinges type B-21 100mm long (2 No), suitable handle (1 No), etc.. complete all as specified and as directed.

Anodised aluminium window and ventilator shutters, fixed type (min 50 micron) without sash bar, aluminium section weighing 0.55 kg/m including necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws etc. complete all as specified and as directed.

S & F Anodised aluminium deco grill of size of mesh not exc 75mm x 75mm, thickness shall approx be 6mm, decorative type and fixed with suitable aluminium section fixed to alum frame of windows / ventilators complete all as specified and as directed.

S & F 4.0mm thick frosted Sheet glass, ordinary quality and glazing with oil putty in square n exc 0.5 sqm in each pane and fixed to aluminum frames using rubber packing complete all as specified and as directed.

S & F in repairs stainless steel wire cloth. 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples complete all as specified and as directed.

S & F 100mm mild steel Butt hinges hinges fixed with stainless steel screw with frame complete all as specified and as directed.

S & F 150mm Alumininum anodised barrel tower bolts of extruded section complete all as specified and as directed.

S & F 125mm long Extruded aluminium alloy handles, fabricated type, anodised complete all as specified and as directed.

M & L for old size Brick work with fly ash bricks straight or curved on plan and 6 metre mean radius built in CM 1:6 complete all as specified and as directed.

Taking down cement plaster on brick or stone walls, etc. including raking out joints, hacking for key, scrubbing down with water etc… complete all as specified and as directed.

M & L for Rendering 10mm thick in CM 1:6 on fair faces of brick work or concrete surfaces and finished even and smooth without using extra cement on internal wall surfaces complete all as specified and as directed.

M & L for Pressed steel frames of size 125 x 60mm for doors with one or more rebates including necessary fixing lugs, hinges, lock strike plate etc., complete all as specified and as directed.

All as per item No 72 here in before but of frame size 105 x 60mm complete all as specified and as directed.

S & F 35mm thick II nd class hardwood factory made plain framed panelled door shutter two panels, with lock rail and panel of 9mm BWP, commercial ply or 12mm veneered particle board with commercial face veneering on both faces complete all as specified and as directed.

M & L for 35mm thick II nd class hardwood glazed and skeleton shutters, open rebated and prepared to receive glass, gauge etc., without sash bars, edgesof framing plain, chamfered or rounded fitted with cut and mitred beads for securing glass or gauge etc., size of members of shutters as spcd in SSR part I, section 8, clause 8.24 (a0 supplied and fitted to chowkats complete all as specified and as directed.

Cutting holes in brick walls exc half brick n.exc one brick, built in cement mortar for inserting hold fast and making good dismantled portion in cement concrete 1:2:4 type B-1 as required complete all as specified and as directed.

S & F mild steel FI 25 x 3mm holdfast 300mm long, hand made sliding bolts, clamps, hook and pintle hinges, large hasp and staples similar articles conforming to Fe 290 gde E 165 complete all as specified and as directed.

S & F anodised aluminium door shutters, aluminium section weighing 0.55 kg/m including necessary joining cleats, glazing clips, rubber neoprene packing, handles 2 Nos in each door, hinges, anodised aluminium snap beading screws etc.., complete all as specified and as directed.

S & F 4.0mm thick Sheet glass, ordinary quality and glazing with oil putty in square n exc 0.5 sq.m in each pane and fixed to aluminum frames using rubber packing complete all as specified and as directed.

S & F 5.5mm thick Sheet glass, ordinary quality and glazing with oil putty in square exc 0.5 sq.m in each pane and fixed to aluminum frames using rubber packing complete all as specified and as directed.

Hacking out old broken glass (any thickness size, quality or description) from wooden frames glazed with putty or fixed with beads complete all as specified and as directed.

S & F 300 mm long Aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolt and sliding bolts of extruded sections or cast aluminium alloy and fixed complete all as specified and as directed.

M & L for preparing new wooden surfaces of any description, over 10 cm in width or girth, not otherwise described and applying two coat of Synthetic enamel paint over a coat of pink primer complete all as specified and as directed.

M & L for preparing new steel surfaces of any description, over 10 cm in width or girth, not otherwise described and applying two coat of Synthetic enamel paint over a coat of red oxide primer complete all as specified and as directed.

Cutting openings, through brick walls built in cement mortar for door, window and other openings or enlarging existing openings, converting window into door openings etc., or cutting out defective brick work for under pinning, including providing, fixing and removing shoring cleaning and stacking bricks, removing demolished materials not exc 50m complete all as specified and as directed.

Forming jambs etc., to openings (to foregoing item), in Cement mortar 1:6, including cutting, toothing and properly bonding into old work, also facing, jointing and pointing to match existing work complete all as specified and as directed.

Making good under cills or over arches, lintels and bressumers, including all pinning when necessary in Cement mortar 1:6 complete all as specified and as directed.

M & L for cement concrete type B0 1;2:4, (12.5mm graded stone aggregate) as in back filling to pressed steel frames complete all as specified and as directed.

M & L for rendering 10mm thick in CM 1: 6 as under layer and 5mm thick in CM 1:4 mixed with water proofing compound as finishing layer to external wall surfaces and finishing the surface even and smooth including taking down existing cement plaster if necessary complete all as specified and as directed.

Supply only integral liquid water proofing compound.

Complete removal of existing treatment on walls and applying two coats of oil bound distemper over a coat of primer over a coat of 3mm thick wall care putty to internal wall surfaces complete all as specified and as directed.

Preparing new plastered wall surfaces and applying two coat of oil bound distemper over a coat of primer 3mm thick wall care putty complete all as specified and as directed.

Preparation of old decorated ceiling surfaces including necessary scaffolding and applying one coats of white wash including filling the cracks/depressions using chalk whitening wherever required complete all as specified and as directed.

Complete removal of existing treatment on walls and applying two coats of exterior weather proof paint over a coat of weather proof primer to all external wall surfaces complete all as specified and as directed.

M & L for preparing old wooden surfaces of any description, over 10 cm in width or girth, not otherwise described and applying one coat of Synthetic enamel paint complete all as specified and as directed.

M & L for preparing old steel surfaces of any description, over 10 cm in width or girth, not otherwise described and applying one coat of Synthetic enamel paint complete all as specified and as directed.

M & L for 75mm thick plain cement concrete type C1, 1:3:6 using 20mm graded stone aggregate as in plinth protection and finishing the surface even and smooth complete all as specified and as directed.

Dismantling of Wall and ceiling boards (fibre, pulp, insulation, etc.) or insulation boards/slabs/ blankets, any thickness, including cover fillets complete all as specified and as directed.

S & F Anodised aluminium snap grid of size 605 x 605mm frame work for false ceiling and 8mm thick exposed metal frame ceiling with calcium silicate board of siliceous and calcareous material reinforced with cellulose fibre for fixing in grid complete all as specified and as directed.

Dismantling Asbestos cement (corrugated, semi corrugated, etc.,) sheets as in roof coverings complete all as specified and as directed.

Dismantling timber scantlings 40 Sqcm and over in section, framed work, in any position complete all as specified and as directed.

Dismantling wrought iron or mild steel work of any description not otherwise provided for

M & L for Second class hard wood in scantlings, timber framed and fixed, wrought complete all as specified and as directed.

All as above but except timber complete all as specified and as directed.

S & F Roof trusses (framed), trussed, purlins, crane gantries, rails and fastenings and hevy bracket framing (Beam, tee, angle, channel or flat sections) including distance pieces, cleats etc.,conforming to Fe-290 (Gde E-165) complete all as specified and as directed.

S & F hand rails, half round or other steel section, drilled and countersunk for balusters, wind ties for roof including securing bolts, posts and struts in fencing etc., conforming to Fe-290 (Gde E-165) complete all as specified and as directed.

S & F 0.50mm thick pre painted galvalume aluminium zinc coating GI based corrugated steel sheet of an colour having tensile strength of 550 mpa a in roof covering / cladding to wall, fixed with self tapping screws complete all as specified and as directed.

S & F 0.50mm thick pre painted galvalume aluminium zinc coating GI based plain steel sheet of an colour having tensile strength of 550 mpa a in roof covering / cladding to wall, fixed with self tapping screws complete all as specified and as directed.

Removing the existing roof treatment of any description completely and removal of all the debris from site and rubbish off the premises complete all as specified and as directed.

M & L cement Screed bed 20mm thick in CM 1:4 with using waterproofing liquid as per manufacturers instructions. (WPC Measured and paid separately)

M & L for water proofing treatment with APP modified prefabricated five layer water proofing membrane, not less than 3mm thick and weighing not less than 3.00 Kg/Sqm reinforced with non woven polyester matt black finished over compatible primer at 0.3 litre/Sqm, touching the membrane on whole surface uniformly while unrolling the membrane by LPG and sealed with trowel after necessary preparation of surface complete all as per manufactures instructions . The over lap joint shall be provided of 75mm in longitudinal direction and 100mm in transverse direction respectively. All the angles, abutments and the drainage outlets shall be sealed with extra care to ensure full bondage complete all as specified and as directed. Manufactures : IWL India Ltd/SAPL (ARGO-P) Hydrotech Ltd (Hydroflame)/STP. Note : The work shall be carried out be authorised applicators of manufactures

Taking down carefully copper/ Aluminium point wiring (light, fan, socket or power) complete (fitting such as switches, ceiling roses, pendants, regulators, sockets, etc can be measured separately) removing the material from wall/ceiling etc, making good the disturbed surfaces and taken as credit complete all as specified and as directed.

Material and Labour for Point wiring complete with 1.5sqmm single core PVC insulated unsheathed cable 1100 volts grade, multistranded copper conductor FRLSH drawn through and including non-matallic rigid PVC conduit PVC conduit fittings and conduit asccessorries concealed in walls, roofs and floors etc., including Modular flush boxes and Modular cover plates for switches concealed in walls, roof and socket / electronics fan regulator / telphone socket, including provision of 1.5 sqmm PVC insulated unsheathed cable with multi stranded copper conductor as earth continmuity conductor and connecting to common earth dolly all as specified for one light/fan point controlled by one way switch complete including cutting chases, pinning in, making good to facing where required and pointing in cement mortar 1:3 for concealed conduit wiring and making good the disturbed surfaces, matching with the existing wall surfaces, cutting not exceeding 10 Cm girth complete all as specified and as directed.

(a) One light point controlled by one switch.

(b) One Ceiling fan point controlled by one switch and one regulator.

(c) One 3 pin 5 amps switch socket on independent board.

(d) One 3 pin 5 amps switch socket on same board along with other switches.

(e) One exhaust point controlled by one switch

(f) One bell point controlled by bell push switch on independent board.

All as per item No.2 above but with 4 sqmm copper conductor cable with 2.5 sqmm PVC copper conductor FRLSH cable as earth continuity conductor for one socket outlet 15/16 amps controlled by one switch 15/16 Amps on independent board complete all as specified and as directed.

M&L for sub main wiring with PVC insulated, 1100 volts grade single core multistranded copper conductor FRLSH cable conforming to IS specifications, 2 runs of 6 sqmm including one run of 6 sqmm single core multistranded copper conductor PVC insulated cables as earth continuity conductor with colour code drawn through and including one run of 25 mm dia rigid PVC conduit and conduit accessories or casing capping incl accessories fixed on wall/ceiling etc., or concealed in wall and connecting to common earth dolly including taking down old unsv complete all as specified and as directed. Note: - 3 runs of cable& 1 run of PVC pipe will be measured as 1 Unit RM

M&L for sub main wiring with PVC insulated, 1100 volts grade single core multistranded copper conductor FRLSH cable conforming to IS specifications, 2 runs of 10sqmm including one run of 10sqmm single core multistranded copper conductor PVC insulated cables as earth continuity conductor with colour code drawn through and including one run of 25 mm dia rigid PVC conduit and conduit accessories or casing capping incl accessories fixed on wall/ceiling etc., or concealed in wall and connecting to common earth dolly including taking down old unsv complete all as specified and as directed. Note: - 3 runs of cable& 1 run of PVC pipe will be measured as 1 Unit RM

M & L for sub main wiring with PVC insulated, 1100 volts grade single core multistranded copper conductor FRLSH cable conforming to IS specifications, 4 runs of 10sqmm including one run of PVC insulated cables 10sqmm as earth continuity conductor drawn through and including rigid PVC conduit and conduit accessories fixed on wall/ceiling etc., or concealed in wall and connecting to common earth dolly complete all as specified and as directed. Note: - 5 runs of cable& 1 run of PVC pipe will be measured as 1 Unit RM

Supply, Installation, testing and commissioning of Surface mounted LED luminaries with Mid flux LED of Size 2' x 2' using efficient optics , System lumen efficacy > 80Lumen/Watt , System Luminous flux of >=3200 lumens, System Wattage <=42W with 50,000 hours burning life. Color rendering index > 70 and Color temperature 5000K/6500K. CRCA housing with high efficiency opal diffuser. Luminaries sealed from bottom. Inbuilt gear . Zero maintenance, Zero mercury. Driver Surge protection > 1.5kV. Electronic In-Built PF > 0.9 , THD < 10% , IEC Compliant for Safety Performance & EMI complete all as specified and as directed.

Supply and fix Wall mounted LED 20W Batten Basic all purpose surface and wall mounted LED batten with Aluminium housing & Integrated electronic driver complete all as specified and as directed. Make: Havells/philips/CG

Supply and fixing wall mounted LED batten, Extruded aluminium housing provided efficient heat disipation with polycarbonate diffuser with integrated electronic driver high efficacy.short circuit & voltage cut off protection, wide opearting voltage range of 140V to 270V wide, lumen output of 1050,10W including lamp with complete all as specified and as directed.

Supply and Fix Endura PEARL 30 W MP Bldg Security light New generation energy saving & environmental friendly long life Versatile pressure die-cast aluminium IP 66 roadway luminarie with high power LEDs as light source and electronic driver of Lamp type:30W LED 6000K complete all as specified and as directed.

Supply and Fix inrepairs of metal clad socket single pole and neutral enclosure with a two pin and earth plug top and socket complete with one single pole MCB 240 Volts 20 Amps complete all as specified and as directed.

Supply and fix MCCB Distribution board, TP&N , vertical , double door, sheet steel, enclosure powder coated with 100 Amps rated busbar with neutral link,415 Volts 8 way fixed on wall duly grouted in solid block wall or on wooden board with electrical connection complete including 3 Pole V-Tec MCCB of 160 A rating & 16kA breaking capacity, MCCB pre-fitted at factory including taking down Old DBs complete all as specified and as directed.

Supply and fix MCCB four pole , 415 Volt, 125 Amps,16 KA , adjustable thermal & fixed magnetic setting including taking down Old MCCB complete all as specified and as directed.

Supply and fix MCB Distribution board , 415 Volts Triple pole and earth encolsure with a three pin and earth plug with socket complete with one triple pole MCB double door, sheet steel, enclosure powder coated with 250 Amps rated busbar with neutral link, 4 ways , fixed on wall duly grouted in solid block wall or on wooden board with electrical connection complete all as specified and as directed.

Supply and fix MCB Distribution board , 240 volts single pole and neutral ,double door, sheet steel, enclosure powder coated with 100 Amps rated busbar with neutral link,12 ways , fixed on wall duly grouted in solid block wall or on wooden board with electrical connection complete all as specified and as directed.

Supply and fix MCB Distribution board , 240 volts single pole and neutral ,double door, sheet steel, enclosure powder coated with 100 Amps rated busbar with neutral link, 8 ways , fixed on wall duly grouted in solid block wall or on wooden board with electrical connection complete all as specified and as directed.

Supply & Fix inrepairs MCB TPN 415 volts, 100 amps Capacity complete all as specified and as directed.

Supply & Fix inrepairs MCB TP 415 volts, 100 amps Capacity complete all as specified and as directed.

Supply & Fix MCB SPN 230 volts, 40 amps 'C' Curve 10 kA Capacity including taking down Old MCB complete all as specified and as directed.

Supply & Fix inrepairs MCB SP 230 volts,40 amps 'C' Curve 10 kA Capacity complete all as specified and as directed.

S & F Ceiling rose surface bakelite 65mm x 50 mm two to three terminals complete all as specified and as directed.

S & F Modular switch 1 way 6A, 1 module, 240 Volts complete all as specified and as directed.

S & F Modular switch 1 way 16A, 1 module, 240 Volts complete all as specified and as directed.

S & F Modular Socket, 6A - 2/3 pin combined 2 module complete all as specified and as directed.

S & F Modular socket 6 A/ 16 A - 2/3 pin combined 2 module complete all as specified and as directed.

S & F lamp holder, insulated body, with back plate for batten fitting with LED bulb complete all as specified and as directed.

S & F Modular Bell push, flush type, 5 amp complete all as specified and as directed.

S & F bell ding Dong 230V AC single pole complete all as specified and as directed.

S & F Modular Fan step regulator, 100W - 1 module for ceiling Fan of 1200 mm sweep complete all as specified and as directed.

Supply and fix in replacement of ceiling fans, complete with three blade, down rod, accesspries 230V, 1200mm sweep, with Squirrel cage induction motor not more than 50 W with suitable down rod complete complying following specifications:- (a) Rated voltage= 230 to 240V, AC (b) Rated frequency= 50 Hz (c) Capacitor= 1.5+/-5% (d) Full load speed= 350 RPM (e) Air delivery= 220 m3/min (f) Power factor= 0.90 PF (g) Winding temp rise= 75o C max (h) Class of insulation= Class 'B' (j) Noise level = below 70 db Make: Bajaj Kassel 12S1 1200mm/ Orient Apex Prime 1200mm white/Crompton Star 220 Sure breeze fan 1200mm Note: Old unsv ceiling fans deposited to MES Store yard

Disconnection and taking down Old Exhaust Fan and deposite it to MES store safely Supply and fix exhaust fan, steel body AC single Phase. 230V of size 300mm sweep with, blades, and frame and louvers with all accessories and incl making hole of suitable size all as per site requirment complete all as specified and as directed.

Disconnection and taking down Old Geyser and deposite it to MES store safely.Supply and fixing Geyser ( Electric storage water heater), electric operated, AC, 230 Volts, 50Hz of capacity 25 litres,Vertical type Energy efficient 5 star rating of suitable storage tank including incoming & out going PVC connection pipe of suitable lengh for Hot water and cold water, washers, On/Off thermostat control knob,Indication lights etc all as per IS specification complete all as specified and as directed.

Excavation in trenches not exceeding 1.5 m wide and not exceeding 1.5 m depth and getting out soft / loose soil for laying cables / pipes / erection of poles etc complete all as specified and as directed.

Removing excavated material (soil) not exceeding 50 m and depositing where directed at a level not exceeding 1.5 m above the starting point complete all as specified and as directed.

Returning filling in soil including spreading levelling watering well ramming in layers not exceeding 25 cm each complete all as specified and as directed.

Supplying and laying burnt brick "B" class standard size for protection of cable complete all as specified and as directed.

Fine sieved excavated dry soil laid to the required width of trench at bottom and top of cable as cushioning all as specified and as directed.

Supply & Lay UG cable 2 core 10Sqmm XLPE insulated screened PVC bedded, gaivanized steel strip or wire armoured, electric power cables (heavy duty) 1100 volts grade with stranded aluminium conductor complete all as specified and as directed. Note :- i) Lugs and glands are deemed to be included in the rate quoted for laying of cable and to be used properly whereever required while connecting cables to the panel board. ii) Earth work such excavation, refilling, etc. shall be measured separately under relevant items.

S&F of tubes light grade of size 40 mm dia galvanised with all fittings and fixed complete to walls and ceiling or laid in treanches, fixed on pole /under road crossing or passing through gutters etc including necessary road cutting and making good with PCC 1:2:4 type B1 (using 20 mm graded crushed stone aggregate) complete, including taking down old u/s GI tubing complete all as specified and as directed.

Supply and fixing 20 Watts New generation, post-top, energy saving, environmental friendly, long life aesthetically designed with symmetrical light distribution, spun aluminium landscape luminaire with high power LEDs as light source complete all as specified and as directed.

Supply and fix Pole mounted Sheet Moulded Compound (SMC) Box weather proof type with hinged type door off white color of size 240x130x110 mm comprising of 1 No MCB 6A and 1 No neutral link complete fixed on pole with suitable clamps, bolts and nuts complete all as specified and as directed. Make: Sintex

Material and Labour for Earthing complete with galvanised steel earth plate electrode of size 60 cm x 60 cm x 6 mm thick burried directly in ground vertically to a depth of not less than 2.25 mtr below normal ground level with top edge of earth plate not less than 1.5 mtr below normal ground level, connected to galvanised iron/steel earth wire 4 mm dia by means of bolts, nuts, washers and check nuts made out of galvanised iron, protected by GI pipe medium grade pipe 20mm dia, 7.5m length and connected to main control board all as shown in Electrical plate No 3 of MES SSR Part I including necessary excavation and earth work in any type of soil, salt, charcoad dust, PCC 1:2:4 type B1 in chamber, RCC 1:2:4 chamber cover with 6 mm dia MS bar at 100 mm centre to centre both ways and MS 6 mm dia hook GI pipe light grade watering pipe 15mm dia,Funnel,Mesh etc.., complete all as specified and as directed.

G.JANAKIRAMAN CO (BID ID -3389358)

M/s KM Marimuthu Achary (BID ID -3389095)

MONISH CONSTRUCTIONS (BID ID -3389349)

GOKUL ENTERPRISES (BID ID -3390075)

DJ Group (BID ID -3388715)

ASHWIN ASSOCIATES (BID ID -3388866)

SRI BALAJI CONSTRUCTIONS (BID ID -3389351)