8469 REPAIR REPLACEMENT OF DOOR WINDOWS VENTILATORS AND CONNECTED WORKS AT CERTAIN OTM AND MD ACCN UNDER AGE B R III OF GE (SOUTH) PUNE

Amount

Taking down chowkhat or frames n. exc. 1.5 sqm each with shutter without taking off shutter from the frame complete all as specified and directed.

Taking down chowkhat or frames exc. 1.5 sqm but n. exc. 4 sqm each with shutter without taking off shutter from the frame complete all as specified and directed.

Taking down shutters of any description n. exc. 1 Sqm each, complete all as specified and directed.

Taking down shutters of any description exc. 1 Sqm each and n. exc. 2 Sqm each, complete all as specified and directed.

M&L for pressed steel frames of 105x60mm size for doors with one or more rebates including necessary fixing lugs, hinges, lock strike plate etc., complete all ass specified and directed.

M&L for pressed steel frames of 125x60mm size for doors with one or more rebates including necessary fixing lugs, hinges, lock strike plate etc., complete all ass specified and directed.

M&L for PCC 1:3:6 type C-0 using 12.5 mm graded stone aggregate as in filling in hollow portion of pressed steel door frames, complete all as specified and directed.

S&F PVC door frame of size 50mm x 47 mm made out of 5mm plain colour PVC sheet reinforced with MS square tube, suppling & fixing in opening as per specification and drawing.

S & F factory made solid PVC moulded door shutter, 28 to 30mm thick (stiles), with 2, 4, or 6 raised panel design with 2mm thick Moulded PVC Sheet on the front face & 2mm plain colour PVC sheet on back face, supplying & fixing in frame at site as per specification & drawing complete all as specified and as directed

M&L for 30mm thick IInd class hard wood glazed and skeleton shutters, open rebated and prepare to receive glass, gauge etc (with sash bars) divided in to square, edges of framing plain, chamfered or rounded, fitted with cut and mitered beads for securing glass etc., size of members of shutters as specified in clause 8.24(a) of SSR Part I 2009, complete all as specified and directed

M&L for Anodised aluminium, powder coated (minimum thickness of powder coating 50 micron) as in frame for doors, windows / sliding window shutters, ventilators with one or more rebates including joining cleat for fixing & EPDM rubber, neoprene gaskets, fixing with dash fasteners etc. complete all as specified and directed

Dismantling of stone slab / tiles of any description or thickness, laid, bedded & pointed in cement mortar in floors, hard standing, apron etc complete all as specified and as directed.

S&F 4 mm thick frosted sheet glass, ordinary quality and glazing with oil putty or glazing pins / spring clips in square complete all as specified and directed.

S&F 25mm thick flush shutters, solid core contruction, with block board core and plywood face panels, commercial type on both sides, complete all as specified and directed.

S&F 30mm thick flush shutters, solid core contruction, with block board core and plywood face panels, commercial type on both sides, complete all as specified and directed.

S&F Stainless steel wire cloth. 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples complete all as specified and directed

S&F in repairs stainless steel wire cloth. 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples complete all as specified and directed

Dismantling cup-board partitions / kitchen shelves, any description, fixed in any position with nails, complete all as specified and directed

S&F in repairs 12mm thick plywood, grade BWR, type BB, fixed with screws to timber frame work, complete all as specified and directed

S&F in repairs 18/20mm thick pre-laminated particle board, exterior grade, pre-laminated one sides with decorative choice lamination and other balancing side white laminations, fixed with screws to timber frame work with 6mm thick teak wood edging to all exposed edges, complete all as specified and directed

S&F continuous (piano) hinges, mild steel, bright finish, width of flaps (When open) 40mm, complete all as specified and directed.

S & F of plain fillet of 2nd class hard wood square, rectangular or triangular in section, wrought, secured with screws, sectional area exc. 6 but n. exc. 13 sqcm complete all as specified and directed.

S & F of plain fillet of 2nd class hard wood square, rectangular or triangular in section, wrought, secured with screws, sectional area n. exc. 3 sqcm as in particle board leaping, complete all as specified and directed.

Hacking out old broken glass (any thickness, size, quality or description) from wooden/steel frames including punching or drilling out old glazing pins/spring clips and providing and fixing new ones etc. complete all as specified and directed.

S&F mild steel 300 mm, ordinary rat tail pattern, spring including rollar and rollar plate , complete all as specified and directed.

S&F in repairs aluminium (extruded section) body door closer hydraulically regulated, designation No. 3, universal type, suitable for door shutters of 851 to 1000 mm in width and of weight between 61 to 80 kg, complete all as specified and directed.

Supply and fix in repairs, stainless steel plate rack of size 24 inch x 30 inch x 10 inch, made out of 0.63mm thick stainless steel sheet (Grade AISI 304 18/8), S S screws and round pipe, fixed to wall with screws complete all as specified and as directed. Make – Blue Star Silver Shine Cat No.KPR-315 or equivalent from Nirali / Jain Brothers Sanitation Pvt Ltd (Jayna) as approved

S&F following sizes mild steel butt hinges medium weight, cold rolled, complete all as specified and directed. (a) 75mm size

(b) 100mm size

Supply only 100mm sizes mild steel butt hinges medium weight, cold rolled, complete all as specified and directed.

S & F 100 mm size butt hinges extruded aluminum alloy with galvanized mild steel hinge pin, anodized, complete all as specified and as directed

S&F 300mm length of bolt, aluminium alloy, anodised, sliding door bolts with hasp staple (bolt type) anf fixing clips of sheet, cast or extruded section and fixing bolts and sliding bolts of extruded sections or cast alluminium alloy, complete all as specified and directed.

S&F for 200mm aluminium anodised barrel tower bolts of extruded section complete all as specified and directed.

S&F for 150mm aluminium anodised barrel tower bolts of extruded section complete all as specified and directed.

S&F 150 mm size extruded aluminium alloy handles, fabricated type, anodised, complete all as specified and directed.

S&F 100 mm size extruded aluminium alloy handles, fabricated type, anodised, complete all as specified and directed.

M&L for hasp & staple 75mm size, aluminium anodised, safety type, aluminium anodised, including bolt to hing plate and fixed with screws, complete all as specified and directed.

M&L for applying two coats of synthetic enamel paint over a coat of pink primer on wooden surfaces exc 10 cm width or girth, including preparation of new wooden surfaces, complete al as specified and directed.

M&L for applying two coats of synthetic enamel paint on new steel surfaces exc 10 cm width or girth, including preparation of surfaces, complete al as specified and directed.

M&L for applying two coats of synthetic enamel paint over a coat of red oxide on steel surfaces exc 10 cm width or girth, including preparation of new steel surfaces, complete al as specified and directed.

S&F double action floor spring spring hydraulically regulated made up of minimum 1.25mm thick aluminium alloy sheet foundation box, main boady with stainless steel cover, governing pivot made of brass, other parts made of mild steel heavy duty, complete all as specified and directed.

S&F floor door stopper, over all length of cover plate 150 mm of aluminium alloy body and tongue, anodised with hard drawn steel spring, fixed in door, complete all as specified and directed.

S&F in repairs steel rolling shutter, thickness of laths 1.00 mm, without ball bearing but gear operated type with bevel gear box and crank handle as specified including top cover, anchoring rod, hasp and staple and one shop coat of primer, errected in position as directed at site, gear operated type with bevel gear box of 0.15X0.12 cm size including crank handle, complete all as specified and directed.

S & F ball bearing suitable for rolling shutter, complete all as specified and directed.

S&F in repairs Collapsible steel gates, top hung, consisting of channel pickets, pivoted flat bars, top and bottom runners, brass handles etc., as specified, erected in position and securing runners with holdfasts and brackets, complete, complete all as specified and directed

Dismantling of walls/ceiling boards(fibre, pulp, insulation, etc) or insulation boards/ slabs / blankets, any thickness including cover fillets etc, complete all as specified and directed.

M&L for granite stone, 20mm thick (Table rubbed and polished), approved colour, well grinded & polished as in steps, window cills, wall / column linings, cooking platform and like, set in CM 1:4 including pointing in white cement 1:2 using marble dust without mixture of pigment to match with shed of granite including 15 mm thick backing coat in CM 1:4, complete all as specified and directed

Rounding to edges of stone slabs one edge, such as in steps, shelf cooking platform, and other similar situations, complete all as specifed and directed.

M&L for Welding in repairs n. exc. 2.5cm in length, complete all as specified and directed

S&F in repairs 18/19mm dia harrison rails, mild steel chromium plated, medium weight including with fixing brackets, stops, roller etc., complete all as specified and directed.

M&L for PCC 1:2:4 type B1 using 20mm graded stone aggregate as in coping / bed blocks etc. including weathering and throating including necessary form work etc., complete all as specified and directed.

Dismantling structural steel work including doors, gates etc, complete all as specified and directed.

M&L for mild steel framed work conforming to Fe-410-w (Gde E-250 quality B) as in doors or gates of angle iron or other section complete drilled for fixing of steel sheeting or other covering doors etc. to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings (exclusive of steel sheeting or other covering, running railsand guides) and hanging, also fastening and fixing complete all as specified and directed.

Re-securing or easing & adjusting without taking down & re-fixing in same opening of shutters of any description exc. 1 Sqm each and n. exc. 2 Sqm each including fixing of new hinges by means of welding or screwing to the door frame, complete all as specified and directed. Note:- Hinges shall be measured and paid separately under respective items of BOQ as “Supply only”

S&F Anodised aluminium grill (anodised transparent or dyed to required shade according to IS: 1868 with minimum anodic coating of grade AC 15 of approved design / pattern, with approved standard section and fixed to the existing window frame with C.P. brass/ stainless steel screws @ 200 mm centre to centre, including cutting the grill to proper opening size for fixing and operation of handles and fixing approved anodised aluminium standard section around the opening, all complete as per requirement and direction of Engineer-in-charge

S & F anodised aluminium snap grid frame work as in false ceiling all as per following specifications: - (i) Snap grid frame work shall be fixed to ceiling with supporting hanger consisting of 6mm dia mild steel rod, J bolts with necessary bolts, nuts and washers etc complete all as per manufacturer’s instructions. (ii) The main and cross tee shall be jointed at junction / crossings with anodised aluminium angle bracket of size as indicated, if not indicated it shall be 15mmx15mmx1.5mm, weighing not less than 0.12 Kg per running metre, fixed with suitable mild steel bolts, nuts and washers, complete all as per manufacturer's instructions. (iii) The snap grid (main/ cross tee section) shall be supported at ends all along the wall with anodized aluminium angle of size as indicated, if not indicated it shall be 40mmx25mmx2mm, weighing not less than 0.36 Kg per running metre. (iv) Size of the snap grid shall be as directed by Engr-in-charge. (v) PVC protected sheeting shall be used to avoid scratches, damage to the frame work while fixing to ceiling.

M&L for providing and fixing Gypsum Board 12mm thick as in ceiling fixed with screw as per manufacturer’s instructions, complete all as specified and directed.

M&L for framed work as in grills, gratings etc. with ends of bars shouldered and / or rivetted, or forged into spikes; framed guard bars; barred iron door, railings and similar work conforming to Fe 290 Gde-E-165, complete all as specified and directed.

S&F in repair 4mm thick Aluminium composite panel ATM sheet interior grade (both side powder coated), fixed in position including rubber beading etc, complete all as directed by Engr-in-charge

S&F 0.90 mm thick Decorative laminate type 1 of surface finish, colour and pattern as approved, fixed with approved adhesive as per manufacturer's etc, complete all as directed by Engr-in-charge

S&F in repair venetion blinds of powder coated aluminium strips or equivalent of approved shades including necessary accessories etc. complete all as directed by Engr-in-charge.

S&F stainless steel flats or angle and other similar sections fixed as in walls with stainless screws & PVC plugs etc, complete all as directed by Engr-in-charge

Anand Trading Co

TULSAYA CONSTRUCTION

SHREESAMARTH CONSTRUCTION