Construction of Administrative Building Class Room at ITI Kajalgaon_TN_69_1

Amount

(A) Construction of Administrative Building: Civil Work Earthwork in excavation for foundation trenches of walls, retaining walls, footings of colum, steps, and septic tank etc. including refiling (return filling) the quantity as necessary after completing of work, breaking clods in return filling dressing, watering and ramming etc. and removal of surplus earth with all lead & lifts as directed and specified in the following classification of soils including bailing out water where necessary as directed and spedified. (A) Up to a depth of 2.0 m below the existing Ground level. (a) In Ordinary Soil.

Providing brick soiling in foundation and under floor with stone/best quality picked jhama brick, sand packed and laid to level and in panel after preparting the subgrade as directed including all labour and materials and if necessary dewatering, complete. (a) Brick on flat soiling.

Plain cement concrete works with coarse aggregate of sizes 13mm to 32mm in foundation bed for footing, steps,walls, brick works etc. (a) In prop 1:3:6 (1 cement :3 coarse sand : 6 coarse aggregate by volume. (using mixture machine).

Supplying, fitting and fixing in position reinforcement bars conforming to relevent I.S. Code for R.C.C. work/R.B. walling including straightening, cleaning, cutting and bending to proper sharpes and length as per details, supplying and binding with 20G annealed black wire and placing in position with proper blocks, supprots, chairs, spacers etc complete. (Upto 1st floor level) A) From Primary Producer: TATA/SAIL/Esser Stell/Jindal Steel/Shyam Steel/RINL (i) TMT Corrosion resistant steel (CRS) reinforcement bar.

Providing form work of ordinary timber planking so as to give a rough finish including centering, shuttering, strutting and proping etc. hight of proping and centering below supporting floor to ceiling not exceeding 4.0 m and removal of the same for in situ reinforced and plain concrete work in: 3.1.1.1. Foundation, footing, base of colums, pile cap, raft and mass concrete works etc. (i) Using 25mm thick plank

Providing form work of ordinary timber planking so as to give a rough finish including centering, shuttering, strutting and proping etc. hight of proping and centering below supporting floor to ceiling not exceeding 4.0 m and removal of the same for in situ reinforced and plain concrete work in: 3.2.1.1. Colums, pillars, posts & strut Square, Rectangular, polygonal in plan or any shape like Tee/L etc. having plane vertical face.

Providing form work of ordinary timber planking so as to give a rough finish including centering, shuttering, strutting and proping etc. hight of proping and centering below supporting floor to ceiling not exceeding 4.0 m and removal of the same for in situ reinforced and plain concrete work in: 3.2.1.2. Sides and soffits of beams, beam haunching, cantilever, girders, bressumers lintelsand horizontal ties. (a) For depth not exceeding 1.0M.

Providing form work of ordinary timber planking so as to give a rough finish including centering, shuttering, strutting and proping etc. hight of proping and centering below supporting floor to ceiling not exceeding 4.0 m and removal of the same for in situ reinforced and plain concrete work in: 3.2.1.3. Flat Surface such as soffts of suspended floors roofs landings cantelever slabs chajjas balconies and the like. (a) Floors etc. upto 200mm in thickness

Providing form work of ordinary timber planking so as to give a rough finish including centering, shuttering, strutting and proping etc. hight of proping and centering below supporting floor to ceiling not exceeding 4.0 m and removal of the same for in situ reinforced and plain concrete work in: 3.2.1.5 Sloping or Battering surfaces such as sloped slabs etc.including folded plates. (a) Where inclination to horizontal plane does not exceed 300 requiring shuttering only on the underside.

Providing and laying plain/reinforced cement concrete works cement coarse sand & 20mm down graded stone aggregate including dewatering if necessary and curing complete but excluding coast of from work and reinforcement for reinforce cement concrete work. (from work and reinforcement will be measured and paid separately) (I) Using Mixer Machine (A) In Sub-Structure up to plinth level Foundation, footing, colums with base, tie & plinth beam, pile cap, base slab, retaining walls, walls of the septic tank inspection pit and the like and other works not less than 100mm thick up to plinth level. N. With out admixture, plasticiser (b) M20 Grade Concrete or prop 1:1.5:3

Brick work in cement morter with 1st class brick including racking out joints and curing complete as directed. (I) In Sub-Structure upto plinth level including dewatering if necessary (b) In proportion 1:4

Earth/Sand filling in plinth in layer not more than 150mm thick including necessary, carriage, watering, raming etc.complete as directed and specified including payment of land compensation, Forest Royalty, Sales Tax and other duties and taxes may be necessary. (C) With Silt (predominently non plastic) by truck carriage including loading and unloading.

Providing and laying plain/reinforced cement concrete works cement coarse sand & 20mm down graded stone aggregate including dewatering if necessary and curing complete but excluding coast of from work and reinforcement for reinforced cement concrete work. (from work and reinforcement will be measured and paid separately) (I) Using Mixer Machine (B) In Sub-Structure from plinth level upto 1st floor level. (ii) Colums, pillars, posts, struts, suspended floor, roof landing , shelf & support balcony, lintel, sill band, beam, girder, bressumer, cantilever, stair case (except spiral stair case and landing) including preparing the top surface & finishing of nosing. N) With out using admixture plasticiser b) M20 grade concrete or Prop 1:1.5:3

Providing and laying 25mm thick damp proof coarse with cement concrete in prop 1:1.5:3 with graded store agg. Stone of 10mm down nominal size including providing approved damp proof admixture in proparation of recommended by the manufacturer including curing etc.complete as directed.

112mm thick 1st class brick nogged wall in cement morter including racking out joints and curing complete as directed in super structure above plinth up to 1st floor level (protruding M.S rod/Tor steel of column to be embeded in cement mortar and will be measured and paid separately) A) 112mm thick btick wall b) In cement mortar in proporation 1:4 (1 cement: 4 sand)

Providing fitting, hoisting and fixing of roof trusses including purlins fabricated out of M.S. black-tube conforming to relevent I.S. code, as per approved design and drawings including providing M.S. cleats, base plates, bolts and nuts and one coat of red oxide Zinc Chromate primer and two coats of approved enamel paints complete including fitting necessary clear etc. for fixing joists as per design and drawings as directed. (b) Using other ISI marked approved circular hollow section.

Providing Bare Galvalume Sheet Roofing at all levels including fitting and fixing self drilling self tapping screws complete. (Roof trusses, purlins etc. to be measured and paid separately) TATA Blue scope/Dyna roof/Durakolor/Wonder Roof or eqivalent as directed by the Department. iv) 0.60mm thick

Providing Bare Galvalume Sheet Roofing accessories (Ridges/Valley/Gutter/Flashing) at all levels including fitting and fiixing self drilling self tappping screws complete. TATA Blue scope/Dyna roof/Durakolor/Wonder Roof or eqivalent as directed by the Department. iv) 0.60mm thick

Plain cement concrete floor base in prop1:3:6 laid in alternate bays as specified with coarse agg. of size 13mm to 32mm including dewatering if necessary, and curing etc. complete. b) 100mm thick

VITRIFIED TILES A) ON FLOOR Providing VITRIFIED floor tiles of approved quality of specified size shape and thickness not less than 18mm on floors, skirtings, risers and traeds of steps over 15mm thick base of cement mortar in prop 1:3 (1 cement : 3 Coarse sand) including cutting where necessary finished with flush pointing with Fix-A-Tile (Choksey/Sika/Pedelite/Rouf) white cement slurry mixed with approved pigment to match shade of tiles, mixed with approved pigment to match the shade of tiles complete at all levels as specified and directed. (Coloured pigment should be in conformity with colour of tiles and as approved and directed by the Department.) (a) Normal Range Somany/Orient/Nitco/Varmora/VITA/Marbito/Make. (ii) of Size 600mm x 600mm and above

B) ON WALLS 5.7.2.2 Providing polished vitrified wall tiles of approved quality, size, shape and thickness not less than 8mm on walls and skirtings over cement mortar bed 10 mm thick in prop. 1:3 (1 cement : 3 coarse sand ) including cutting where necessary finished with flush pointing with Fix-A-Tile (Choksey/Sika/Pedelite/Rouf)/white cement slurry mixed with approved pigment to match shade of tilesc complete at all levels as specified and directed. (coloured pigment should be in conformity with colour of tiles and as approved and directed by the department). i) Of size 300mmx450mm and above

Providing Antiskid tiles of approved quality size, shape not less than 8mm on floor, skirting over a cement mortar bed 15mm thick of 1:3 (1cement :3 coarse sand) approved make Fix-A-Tile (Choksey/Sika/Pedlite/Rouf) white cement complete at all level as specifoed and directed. VITRIFIED TILES (ii) Executive range-1 (Size 600mm x 300mm and above) a) Nitco made (Oak Wood)

65mm thick cement concrete floor consisting of 50mm under layer of cement concrete 1:3:6 (1cement :3 coarse agg. Of size 25mm down) and 15mm thick wearing layer in cement concrete 1:1:2 (1 cement : 1 coarse sand : 2 coarse agg. Of size 10mm down laid in panels and finished with a floating coat of neat cement finish (using cement slurry for boad @ 2.75Kg Per sqm of floor area) including curing etc.complete as directed.

Cement plaster skirting with cement mortar in prop. 1:3 (1 cement : 3 corse sand) finished with a floating coat of neat cement including rounding of junctions with floor. (a) 15mm thick.

Providing, fitting and fixing coloured anodised aluminium windows and ventilators of standard sections of approved brand without horizontal glazing bars joints mitred and welded (manufactured to relevant IS specifications) fitted with 6mm x 3.15mm lugs 100mm long embedded in CC blocks 150mm x 100mm x 100mm in 1:3:6 mix including providing and fixing handles, frictions stays, joining cleat, bolting device, locking arrangement, spring catch as required complete as specified and directed for all levels (Cement concrete to be measured and paid separately). a) Side hung and Top hung windows and ventilators (iv) 5 mm clear glass

Providing, fitting and fixing coloured anodised aluminium windows and ventilators of standard sections of approved brand without horizontal glazing bars joints mitred and welded (manufactured to relevant IS specifications) fitted with 6mm x 3.15mm lugs 100mm long embedded in CC blocks 150mm x 100mm x 100mm in 1:3:6 mix including providing and fixing handles, frictions stays, joining cleat, bolting device, locking arrangement, spring catch as required complete as specified and directed for all levels (Cement concrete to be measured and paid separately). b) Fixed windows and ventilators (iv) 5 mm clear glass

Providing, fitting and fixing anodised aluminuim framed glazed doors with anodised aluminium frame made of 100mm x 45mm x 2.5mm section of approved brand with door style of size 88mm x 45mm x 2.5mm, top rails 50mm x 45mm x 2mm lock rails 100mm x 45mm x 2mm and bottom rails 100mm x 45mm x 2.5mm fitted with glazing clip, special type rubber gasket complete including hydraulic floor spring, pivot, tower bolt in each leaf, aluminium door handle, lock, angles, cleat etc complete as specified and directed by the department at all levels. (iv) Prelaminated Board.

Providing, fitting and fixing 40mm x 48mm wood reinforced PVC chowkhats fixed to the columns/stiffeners/walls with necessary holdfast / sleeves etc. as specified and directed at all levels.

Providing, fitting and fixing 24mm/ 29mm thick polymer reinforced moulded PVC door shutters fixed to the chowkath with necessary hinges, screws, bolts etc. as specified and directed at all levels (Door fixtures and fittings to be measured and paid seperately) b) 29mm thick

Providing and fixing 12mm thick and 150mm wide pelmet with 25mm dia wooden curtain rod and bracket including ficing with 15mm x 3mm M.S flat 100mm long plugs complete. E) Extra for providign and fixing bars curtain rail with rollers, stoppers and brakets in pelmet instead of wooden curtain rods 25mm dia with brakets (actiatl length of the rods to be measured)

Providing fitting and fixing M.S grill of requiredpattern for windows/clerestory windows/opening with M.S flats at required spacing in frame all round squre or round M.S bars with round headed bolts and nuts or screws. I. Plain grill (c) Fixed to Brickwork/PCC/RCC

Providing and fitting stainless steel (Grade 304) railing made of hollow tubes, channels, plates etc. including welding, grinding, buffing polishing and making curvature (wheraver required) and fitting the same with necessary stainless steel nuts and bolts complete, i.e. fixing the railing with neccessary accessories & stainless steel dash fasteners, stainless steel bolts etc. of required size, on the top of the floor or the side of waist slab with suitable arrangement as per approval of engineer in charge. (for payment, only weight of stainless steel member is to be considered. no extra payment for fixing accessories such as nuts, bolts, fasteners etc. will be considered.)

15mm thick cement plaster in single coat on rough side of single half brick wall for interior plastering upto 1st floor level including arrises, internal round angles, not exceeding 80 mm in girth and finished even and smooth including curing complete as directed. A) On rough side (b) In cement mortar 1:4 (1 cement : 4sand)

Providing two coats of acrylic water based wall putty/ wall filter of Asian Paints/Berger/ Dulux over concrete/cement plaster/brick walls and ceilling both internal and external after removing all the loosely adhering material from the wall/ceilling surface with the help of emery stone, putty blade or wire brush, moisterning the wall with the help of sufficient quantity of clear water as specified and directed by the department.

Wall Painting (two coats) with plastic emulsion paint of approved brand and manufacture (Asian/paint/Berger paint/ICI paint/J & N /Nerolac) on new surface to give an even shade after throughly brushing the surfaces free from mortar droppings and other foreign matter and sand papered smooth. (a) Plastic Emulsion Paint of approved brand and manufacture (Asian paint/Berger paint/ICI paint/J & N paint/Nerolac)

Applying one self- priming coat of acrylic emulsion paint of approved brand, thinning by adding water as per the specification of manufacturer over freshly plastered wall surface after throughly brooming the surfaces free mortar droppings and other foreign matter and including preparing the surface even and sand papered smooth as specified and directed by the department. c) Asian paint

Finishing wall with two coats of acrylic emulsion exterior paint of approved brand of required shade, thinning by adding water as per specification of manufacturer after throughly brooming the surfaces to removed all dirt and remains of loose powdered materials as specified and directed by the department. c) Asian paint

Applying primary coat over new steel and other metal surface over 100m in width or girth after preparing the surface by throughly cleaning oil, grease, dirt and other foreign matter and scoured with wire brushes, fine stees, wood scrapers and sand paper. a) With ready mixed red-lead/red oxide primer.

Painting two coats (excluding priming coat) on new steel and other metal surface with enamel paint of approved brand and manufacture(Asian paint/Berger paint/ ICI paint/ J & N paint/ Nerolac) to give an even shade including cleaning the surface of all dirt, dust and other foreign matter. (i) Surfaces over 100mm in width or girth b) High gloss (Asian paint/Berger paint/ICI paint/J & N paint/Nerolac)

Applying priming coat over new wood and wood based surface over 100mm in girth/width after and including preparing the surface by throughly cleaning otl grease. Dirt and other foreign matter sand papering and knottine. (b) With ready mixed paint wood primer (pink)

Painting two coats (excluding priming coat) on new wood and wood based surface with enamel paint of approved brand and manufacture (Asian paint/Berger paint/ICI paint/J & N paint/Nerolic) to give an even shade including cleaning the surface of all dirt, dust and other foreign matter sand papering and stopping. (i) Surfaces over 100mm in width or girth. b) High gloss (Asian paint/Berger paint/ICI paint/J & N paint/Nerolac)

Providing drain with brick work in cement mortar in prop 1:5 with half brick thick side walls and 100mm thick CC (1:3:6) base over one brick flat soiling including 15mm thick cement plastering in prop. 1:3 finished with a floating coat of cement slurry as directed with necessary shettering for sides and earth work in excavation of foundation trenches and refilling the sides after completion of work etc. as specified. (ii) 300 wide and average 250mm deep with bed slope 1 in 150 with initial depth of 100mm.

Providing plinth protection with bricks flat laid in cement mortar 1:4 and finished with 15mm thick cement plaster in prop 1:2 with a floating coat of neat cement finish.

Providing, Fixing, testing & Commissioning of Single Headed Gun Metal ISI Marked oblique pattern Hydrant Landing Valve with 80 mm dia, flanged inlet & 63 mm dia instantaneous type female outlet complete with cap and chain, twist release lug and all accessories as per IS:5290-19833 (Type-'A') and specifications complete as reequired . (MAKE:ESSEL/WINCO/NEWAGE)

Providing and fixing clear sheet glass beded in putty and fixing with/wiithout wooden beadings including necessary cutting of glass to required sizes (payment for wooden beads shall be made separately). (2) Area of glass panes not exceeding 0.15sqm. but not exceeding 0.52m2. (b) 4.00mm thick

Sanitary Installation and Water Supply Works: Providing fitting and fixing vitreous china pedestal type water clost (European type W.C. pan 400mm high) with seat and lead, CP brass hinges and rubber buffers, CI/MS brackets, 40mm dia flush band with fittings including painting of fittings and brackets, required. (Flushing cistern to be paid separately) A) Parryware make a) White (i) Universal Closet S Trap (Cat.No.C0271) (Anglo Indian) (inclusive of seat cover)

Supplying fitting and fixing PVC flushing cisterm with all internal fittings with CI brackets including fitting and fixing standard size CP flush pipe union clams etc.complete as directed and specified (pipes will be measured separately) i) Parryware make a) White (i) Economy single flush (Cat No.C8090/C8055)

Providing fitting and fixing vitreous China flat back type lipped front urinal basin with standard flush pipe and CP brass spreader and brass union, etc.complete including painting of fittings and brackets, cutting and making good the walls wherever required. A) Parryware make a) White (ii) Aquaseal (Cat No.C0508)

Providing fitting and fixing vitreous China flat back type lipped front urinal basin with standard flush pipe and CP brass spreader and brass union, etc.complete including painting of fittings and brackets, cutting and making good the walls wherever required. A) Parryware Make a) White (i) Star Basin 550 x 400 (Cat. No.C0450)

Providing fitting and fixing Mirror with plastic frame of size 500 x 400mm complete as directed and specified.

Providing fitting and fixing recessed soap try/soap dish complete as directed and specified. A. Parryware Make. (i) Recess SP & SG dish (Cat No.C9935)

Providing fitting and fixing CP towel rail complete as directed and specified. (c) Parryware make (Cat. No.C9948)

Supplying fitting and fixing overhead adjustable Chrome Plated (C.P.) spray shower 15mm dia. of Sona make with wall flange as directed and specified.(pipes will be measured and paid separately) (b)Apex/Kiran/Priya/Star/RimZim/Bugle shower with arm

Supplying fitting and fixing approved uPVC Pipes of different sizes, with all necessary 'R' brand or similar approved P.V.C. Fittings such as bend, tee, elbow, reducer, nipple, plug, long screw fitting, clamps etc. complete at all levels including below G.L. as directed and specified. (A) Exposed or in trenches SUPREME/ PRINCE/ SFMC BRAND or other equvalent approved brand (High presure pipe Sch-40) Exposed or in trenches d) 25 mm dia

Supplying fitting and fixing approved uPVC Pipes of different sizes, with all necessary 'R' brand or similar approved P.V.C. Fittings such as bend, tee, elbow, reducer, nipple, plug, long screw fitting, clamps etc. complete at all levels including below G.L. as directed and specified. (A) Exposed or in trenches SUPREME/ PRINCE/ SFMC BRAND or other equvalent approved brand (High presure pipe Sch-40) Exposed or in trenches e) 20 mm dia ii) Using other ISI marked approved brand.

Supplying fitting and fixing approved uPVC Pipes of different sizes, with all necessary 'R' brand or similar approved P.V.C. Fittings such as bend, tee, elbow, reducer, nipple, plug, long screw fitting, clamps etc. complete at all levels including below G.L. as directed and specified. (A) Exposed or in trenches SUPREME/ PRINCE/ SFMC BRAND or other equvalent approved brand (High presure pipe Sch-40) Exposed or in trenches f) 15 mm dia ii) Using other ISI marked approved brand.

Supplying fitting and fixing C.P. Bib cock 15mm dia of approved brand directed and specified. (G.I &C.P pipes will be measured separately) (I) Essco make (Delux/Sumthing spl.Tropical) (a) Bib cock short body

Supplying fitting and fixing stop-cock of approved brand of size as mentioned below and directed and specified (G.I. & C.P.pipes will be measured and paid separately) I) Brass stop cock (heavy) of Sant make. (i) 15mm dia.

Supplying fitting and fixing stop-cock of approved brand of size as mentioned below and directed and specified (G.I. & C.P.pipes will be measured and paid separately) I) Brass stop cock (heavy) of Sant make. (ii) 20mm dia.

Supplying fitting and fixing stop-cock of approved brand of size as mentioned below and directed and specified (G.I. & C.P.pipes will be measured and paid separately) I) Brass stop cock (heavy) of Sant make. (iii) 25mm dia.

Supplying and fitting fixing C.P pillar cock of 15mm dia of approved brand as specification and directed. (ii) Jaguar make (a) Continental

Supplying fitting and fixing Chrome Plated (C.P) flush cock of approved brand as directed and specified (G.I & C.P pipes will be measured and paid separately) (I) Agmeco brand a) Flush cock Economy Cat No.00506

Supplying fitting and fixing chrome plated (C.P) wall mixer complete as directed. (ii) Agmeco brand a) Wall mixer non telephonic Cat No.00211

Supplying fitting and fixing pipes with all necessary fittings in exposed or in trenches or in trenches including trenches and refilling the same etc complete as directed. B) uPC pipe with uPC fittings (Using high pressure pipe) vii) 65mm diameter.

Supplying fitting and fixing pipes with all necessary fittings in exposed or in trenches or in trenches including trenches and refilling the same etc complete as directed. B) uPC pipe with uPC fittings (Using high pressure pipe) x) 110mm diameter.

Supplying fitting and fixing Hand pump for 40 mm dia tube well with all accessosires complete as directed. i) Maya popular-6

Labour for boring hole for inserting tube well pipes through different soil/rock media including hire charges of drill pipes, scaffolding, tools and plants as necesary and taking out the same and lowering pipes, fittings complete as directed by the department. iv) Bore hole of 150mm diameter.

Supplying fitting and fixing pipes plain/bevel ended for casing consorming to relevent IS codes of practice inclluding supplying and fitting of tube well accessories lowering of assembly pipes concentrically in the borehole followed by supplying and packing of pea gravel free from dirt, dust and foreign materials in the annular space between the borehole and assembly pipes complete as directed by the department. II. PVC PIPE SUPREME/PRINCE/FUSION/SFMC Brand vi) 140mm diameter

Supplying fitting and fixing suction pipes plain/bevel ended, conforming to relevant IS codes of practice including supplying and fitting of accessories, lowering of assembly pipes concentrically in the casing pipes complete as directed. B) PVC PIPE SUPREME/PRINCE/FUSION/SFMC Brand vi) 75mm diameter

Supplying fitting and fixing ISI approved PVC filter 3.00 metre long. V) 150mm diameter

Supplying and placing plastic cylindrical vertical claused top (PCVC) tank of Sintex/Polycon/Patton make over the stagging with manhole cover with locking and cleaning arrangement including providing pads of size as required for inlet and outlet pipes (i) 2000 Lt capacity (a) Sintex make

Single phase submersible motor pump set (Texmo/Crompton Gravels/Aquatic/CRI/V-Guar suitable for 100mm bore well and above.

Septic Tank 2 Nos.: Earth work in excavation for foundation trenches of walls, retaining walls.footing of colums,steps and septic tank etc. including refiling (return filling) the quantity as necessary after completing of work. breaking clods in return filling dressing. watering and ramming etc and removal of surplus earth with all lead & lift as directed and specified in following classification of soils including bailing out water where necessary as directed and spedified. (A) Up to a depth of 2.0 m below the existing G.L (a) In Ordinary Soil.

Providing brick soiling in foundation and under floor with stone/best quality picked jhama brick, sand packed and laid to level and in panel after preparting the subgrade as directed including all labour and materials and if necessary dewatering complete. (a) Brick on flat soiling.

Plain cement concrete works with coarse aggregate of sizes 13mm to 32mm in foundation bed for footing, steps,walls,brick works etc. as directed and specified including dewatering if necessary and curing complete (Shuttering works where necessary shall be measured and paid separately.) (a) In prop. 1:3:6 (1 cement :3 coarse sand : 6 coarse agg. by volume. (using mixture machine).

Supplying, fitting and fixing in position reinforcement bars conforming to relevent I.S. Code for R.C.C. work/R.B. walling including straightening, cleaning, cutting and bending to proper sharpes and length as per details supplying and binding with 20G annealed black wire and placing in position with proper blocks,supprots,chairs,spacers etc complete. (upto 1st floor level) c) ISI approved Mild steel reinforcement bar (M.S.Bar)

Flat surfaces such as soffits of suspended floors, roofs, landings, cantelever slabs, chajjas, balconies and the like. (a) Floors etc. Upto 200mm in thickness (ii) Using 25mm thick plank.

Brick work in cement morter with 1st class brick including racking out joints and curing complete as directed. (I) In Sub-Structure upto plinth level including dewatering if necessary (b) In proportion 1:4

Providing and laying plain/reinforced cement concrete works cement coarse sand & 20mm down graded stone aggregate including dewatering if necessary and curing complete but excluding coast of from work and reinforcement for reinforce cement concrete work. (from work and reinforcement will be measured and paid separately) (i) Using Mixer Machine (a) In Sub-Structure up to plinth level Foundation, footing, colums with base, tie & plinth beam, pile cap, base slab,retaining walls, walls of the septic tank inspection pit and the like and other works not less than 100mm thick up to plinth level. N) Without using admixture plasticiser a) M-15 grade concrete or prop.1:2:4

15mm thick cement plaster in single coat on rough side of single half brick wall for interior plastering upto 1st floor level including arrises, internal round angle not exceeding 80 mm in girth and finished even and smooth including curing complete as directed. A) On rough side (b) In cement mortar 1:4 (1 cement: 4 sand)

(B) Construction of First Floor Building: Civil Work Supplying, fitting and fixing in position reinforcement bars conforming to relevent I.S. Code for R.C.C. work/R.B. walling including straightening, cleaning, cutting and bending to proper sharpes and length as per details supplying and binding with 20G annealed black wire and placing in position with proper blocks, supprots, chairs, spacers etc complete. (Upto 1st floor level) a) from Primary Producer: TATA/SAIL/Esser Steel/Jindal Steel/Shyam Steel/RINL (i) TMT Corrosion resistant steel (CRS) reinforcement bar.

3.2.1.1 Column, pillar, post & strut of square/rectangular/polygonal in plan or any shape like Tee/L etc. having plan vertical face.

3.2.1.2. Side and soffts of beam haunchings, cantilever girder, bressumers, lintel & horizontal ties. (a) For depth not exceeding 1.0M

3.2.1.3. Flat surfaces such as soffits of suspended floors, roofs, landings, cantelever slabs, chajjas,balconies and the like. (a) Floors etc. upto 200mm in thickness.

Providing and laying plain/reinforced cement concrete works cement with coarse sand & 20mm down graded stone aggregate including dewatering if necessary and curing complete but excluding cost of from work and reinforcement for reinforced cement concrete work. (from work and reinforcement will be measured and paid separately) (i) Using mixture machine (b) In Super Structure from plinth level up to floor level. (ii) Colums, pillars, posts, struts, suspended floor, roof landing , shelf & support balcony, lintel, sill band, beam, girder, bressumer, cantilever, stair case (except spiral stair case and landing) including preparing the top surface & finishing of nosing. (N) With out admixture, plasticiser (b) M-20 grade concrete ro prop.1:1.5:3

112mm thick 1st class brick nogged wall in cement morter including racking out joints and curing complete as directed in super structure above plinth up to 1st floor level (protruding M.S rod/Tor steel of column to be embeded in cement mortar and will be measured and paid separately) (A) 112mm thick brick wall (b) In cement mortar in proporation 1:4 (1 cement: 4 sand)

Providing fitting, hoisting and fixing of roof trusses including purlins fabricated using MS black-tubes conforming to relevent I.S. code, as per approved design and drawings including providing M.S. cleats, base plates, bolts and nuts and one coat red oxide Zinc Chromate primer and two coars of approved enamel paints complete including fitting necessary cleats etc. for fixing ceiling joists as per design and drawings as directed. a) Using other ISI marked approved circular hollow section.

Providing Bare Galvalume Sheet Roofing at levels including fitting and fixing self drilling, self tapping screws complete. (Roof trusses purlins etc to be measured and paid separately) TATA Blue Scope/Dyna roof /Durakolour/Wonder roof or equivalent as directed by the department. (iv) 0.60mm thick

Providing Bare Galvalume sheet roofing accessories (Ridges/Valley/Gutter/Flasging) at all levels including fitting and fixing self drilling self tapping screws complete. TATA Blue scope/Dyna roof/Durakolor/Wonder Roof or equivalent as directed by the department. (iv) 0.60mm thick

Cement plaster skirting with cement mortar in prop. 1:3 (1 cement : 3 corse sand) finished with a floating coat of neat cement including rounding of junctions with floor. (a) 15mm thick.

Providing, fitting and fixing coloured anodised aluminium windows and ventilators of standard sections of approved brand without horizontal glazing bars joints mitred and welded (manufactured to relevant IS specifications) fitted with 6mm x 3.15mm lugs 100mm long embedded in CC blocks 150mm x 100mm x 100mm in 1:3:6 mix including providing and fixing handles, frictions stays, joining cleat, bolting device, locking arrangement, spring catch as required complete as specified and directed for all levels.(Cement concrete to be measured and paid separately). a)Side hung and Top hung windows and ventilators (iv) 5 mm clear glass

Providing, fitting and fixing coloured anodised aluminium windows and ventilators of standard sections of approved brand without horizontal glazing bars joints mitred and welded (manufactured to relevant IS specifications) fitted with 6mm x 3.15mm lugs 100mm long embedded in CC blocks 150mm x 100mm x 100mm in 1:3:6 mix including providing and fixing handles, frictions stays, joining cleat, bolting device, locking arrangement, spring catch as required complete as specified and directed for all levels.(Cement concrete to be measured and paid separately). (b) Fixed windows and ventilators (iv) 5 mm clear glass

Providing, fitting and fixing anodised aluminuim framed glazed doors with anodised aluminium frame made of 100mm x 45mm x 2.5mm section of approved brand with door style of size 88mm x 45mm x 2.5mm, top rails 50mm x 45mm x 2mm lock rails 100mm x 45mm x 2mm and bottom rails 100mm x 45mm x 2.5mm fitted with glazing clip, special type rubber gasket complete including hydraulic floor spring, pivot, tower bolt in each leaf, aluminium door handle, lock, angles, cleat etc complete as specified and directed by the department at all levels. (iv) Prelaminated Board

Providing and fixing 12mm thick and 150mm wide pelmet with 25mm dia wooden curtain rod and bracket including ficing with 15mm x 3mm M.S flat 100mm long plugs complete. E) Extra for providign and fixing bars curtain rail with rollers, stoppers and brakets in pelmet instead of wooden curtain rods 25mm dia with brakets (actiatl length of the rods to be measured)

Providing fitting and fixing M.S grill of required pattern for windows/clerestory windows/opening with M.S flats at required spacing in frame all round squre or round M.S bars with round headed bolts and nuts or screws. I. Plain grill (c) Fixed to Brickwork/PCC/RCC

15mm thick cement plaster in single coat on rough side of single half brick wall for interior plastering upto 1st floor level including arrises, internal rounded angles, not exceeding 80 mm in girth and finished even and smooth including curing complete as directed. A) On rough side (b) In cement mortar 1:4 (1 cement : 4sand)

Providing surface preparation for walls, ceilling etc, using average 1.50mm thick plaster of paries of paris including rubbing with sand paper filling gaps, depression etc. where necessary with chalk powder and plaster of pairs paste making the surface even and smooth complete at all levesl as specified and directed.

Providing two coats of acrylic water based wall putty/ wall filter of Asian Paints/Berger/ Dulux over concrete/cement plaster/brick walls and ceilling both internal and external after removing all the loosely adhering material from the wall/ceilling surface with the help of emery stone, putty blade or wire brush, moisterning the wall with the help of sufficient quantity of clear water as specified and directed by the department.

Wall Painting (two coats) with plastic emulsion paint of approved brand and manufacture (Asian/paint/Berger paint/ICII paint/J & N /Nerolac) on new surface to give an even shade after throughly brushing the surfaces free from mortar droppings and other foreign matter and sand papered smooth. (a) Plastic Emulsion Paint of approved brand and manufacture (Asian paint/Berger paint/ICI paint/J & N paint/Nerolac)

Applying one self- priming coat of acrylic emulsion paint of approved brand, thinning by adding water as per the specification of manufacturer over freshly plastered wall surface after throughly brooming the surfaces free mortar droppings and other foreign matter and including preparing the surface even and sand papered smooth as specified and directed by the department. c) Asian paint

Finishing wall with two coats of acrylic emulsion exterior paint of approved brand of required shade, thinning by adding water as per specification of manufacturer after throughly brooming the surfaces to removed all dirt and remains of loose powdered materials as specified and directed by the department. c) Asian paint

Applying primary coat over new steel and other metal surface over 100m in width or girth after preparing the surface by throughly cleaning oil, grease, dirt and other foreign matter and scoured with wire brushes, fine stees, wood scrapers and sand paper. a) With ready mixed red-lead/red oxide primer.

Painting two coats (excluding priming coat) on new steel and other metal surface with enamel paint of approved brand and manufacture(Asian paint/Berger paint/ ICI paint/ J & N paint/ Nerolac) to give an even shade including cleaning the surface of all dirt, dust and other foreign matter. (i) Surfaces over 100mm in width or girth b) High gloss (Asian paint/Berger paint/ICI paint/J & N paint/Nerolac)

Applying priming coat over new wood and wood based surface over 100mm in girth/width after and including preparing the surface by throughly cleaning otl grease. Dirt and other foreign matter sand papering and knottine. (b) With ready mixed paint wood primer (pink)

Painting two coats (excluding priming coat) on new wood and wood based surface with enamel paint of approved brand and manufacture (Asian paint/Berger paint/ICI paint/J & N paint/Nerolic) to give an even shade including cleaning the surface of all dirt, dust and other foreign matter sand papering and stopping. (i) Surfaces over 100mm in width or girth. b) High gloss (Asian paint/Berger paint/ICI paint/J & N paint/Nerolac)

Providing,Fixing, testing & Commissioning of Single Headed Gun Metal ISI Marked oblique pattern Hydrant Landing Valve with 80 mm dia, flanged inlet & 63 mm dia instantaneous type female outlet complete with cap and chain, twist release lug and all accessories as per IS:5290-19833 (Type-'A') and specifications complete as reequired . (MAKE:ESSEL/WINCO/NEWAGE)

Providing and fixing clear sheet glass beded in putty and fixing with/wiithout wooden beadings including necessary cutting of glass to required sizes (payment for wooden beads shall be made separately). (2) Area of glass panes not exceeding 0.15sqm. but not exceeding 0.52m2. (b) 4.00mm thick

Sanitary Installation and Water Supply Works: Providing fitting and fixing vitreous china pedestal type water clost (European type W.C. pan 400mm high) with seat and lead, CP brass hinges and rubber buffers, CI/MS brackets, 40mm dia flush band with fittings including painting of fittings and brackets required. (Flushing Cistern to be separately) A) Parryware make a) White (i) Universal Closet S Trap (Cat.NoC0271) (Anglo Indian) (Inclusive of seat cover)

Supplying fitting and fixing PVC flushing cisterm with all internal fittings with CI brackets including fitting and fixing standard size CP flush pipe union clams etc.complete as directed and specified (pipes will be measured separately) i) Parryware make a) White (i) Economy single flush (Cat No.C8090/C8055)

Providing fitting and fixing vitreous China flat back type lipped front urinal basin with standard flush pipe and CP brass spreader and brass union, etc.complete including painting of fittings and brackets, cutting and making good the walls wherever required. A) Parryware make a) White (ii) Aquaseal (Cat No.C0508)

Providing fitting and fixing vitreous China flat back type lipped front urinal basin with standard flush pipe and CP brass spreader and brass union, etc.complete including painting of fittings and brackets, cutting and making good the walls wherever required. Basin (Without pedestal) A) Parryware Make a) White (i) Star Basin 550 x 400 (Cat. No.C0450)

Providing fitting and fixing Mirror with plastic frame of size 500 x 400mm complete as directed and specified.

Providing fitting and fixing recessed soap try/soap dish complete as directed and specified. A. Parryware Make. (i) Recess SP & SG dish (Cat No.C9935)

Providing fitting and fixing CP towel rail complete as directed and specified. (c) Parryware make (Cat. No.C9948)

Supplying fitting and fixing overhead adjustable Chrome Plated (C.P.) spray shower 15mm dia. of Sona make with wall flange as directed and specified.(pipes will be measured and paid separately) (b)Apex/Kiran/Priya/Star/RimZim/Bugle shower with arm

Supplying fitting and fixing approved uPVC Pipes of different sizes, with all necessary 'R' brand or similar approved P.V.C. Fittings such as bend, tee, elbow, reducer, nipple, plug, long screw fitting, clamps etc. complete at all levels including below G.L. as directed and specified. (A) Exposed or in trenches SUPREME/ PRINCE/ SFMC BRAND or other equvalent approved brand (High presure pipe Sch-40) Exposed or in trenches d) 25 mm dia

Supplying fitting and fixing approved uPVC Pipes of different sizes, with all necessary 'R' brand or similar approved P.V.C. Fittings such as bend, tee, elbow, reducer, nipple, plug, long screw fitting, clamps etc. complete at all levels including below G.L. as directed and specified. (A) Exposed or in trenches SUPREME/ PRINCE/ SFMC BRAND or other equvalent approved brand (High presure pipe Sch-40) Exposed or in trenches e) 20 mm dia (ii) Using other ISI marked approved brand.

Supplying fitting and fixing approved uPVC Pipes of different sizes, with all necessary 'R' brand or similar approved P.V.C. Fittings such as bend, tee, elbow, reducer, nipple, plug, long screw fitting, clamps etc. complete at all levels including below G.L. as directed and specified. (A) Exposed or in trenches SUPREME/ PRINCE/ SFMC BRAND or other equvalent approved brand (High presure pipe Sch-40) Exposed or in trenches f) 15 mm dia (ii) Using other ISI marked approved brand.

Supplying fitting and fixing C.P. Bib cock 15mm dia of approved brand directed and specified. (G.I &C.P pipes will be measured separately) (I) Essco make (Delux/Sumthing spl.Tropical) (a) Bib cock short body

Supplying fitting and fixing stop-cock of approved brand of size as mentioned below and directed and specified (G.I. & C.P.pipes will be measured and paid separately) I) Brass stop cock (heavy) of Sant make. (i) 15mm dia.

Supplying fitting and fixing stop-cock of approved brand of size as mentioned below and directed and specified (G.I. & C.P.pipes will be measured and paid separately) I) Brass stop cock (heavy) of Sant make. (ii) 20mm dia.

Supplying fitting and fixing stop-cock of approved brand of size as mentioned below and directed and specified (G.I. & C.P.pipes will be measured and paid separately) I) Brass stop cock (heavy) of Sant make. (iii) 25mm dia.

Supplying and fitting fixing C.P pillar cock of 15mm dia of approved brand as specification and directed. (ii) Jaguar make (a) Continental

Supplying fitting and fixing Chrome Plated (C.P) flush cock of approved brand as directed and specified (G.I & C.P pipes will be measured and paid separately) (I) Agmeco brand a) Flush cock Economy Cat No.00506

Supplying fitting and fixing chrome plated (C.P) wall mixer complete as directed. (ii) Agmeco brand a) Wall mixer non telephonic Cat No.00211

(C) Boundary Wall: Earth work in excavation for foundation trenches of walls, retaining walls.footing of colums, steps and septic tank etc. including refiling (return filling) the quantity as necessary after completing of work. breaking clods in return filling dressing. watering and ramming etc and removal of surplus earth with all lead & lift as directed and specified in following classification of soils including bailing out water where necessary as directed and spedified. (A) Up to a depth of 2.0 m below the existing Ground Level (a) In Ordinary Soil.

Providing brick work soiling in foundation and under floor with stone/best quality picked jhama brick, sand packed and laid to level and in panel after preparting the subgrade as directed including all labour and materials and if necessary dewatering complete. (a) Brick on flat soiling.

Plain cement concrete works with coarse aggregate of sizes 13mm to 32mm in foundation bed for footing, steps, walls, brick works etc. as directed and specified including dewatering if necessary and curing complete (Shuttering works where necessary shall be measured and paid separately.) (a) In prop 1:3:6 (1 cement :3 coarse sand : 6 coarse aggregate by volume. (using mixture machine).

Supplying, fitting and fixing in position reinforcement bars conforming to relevent I.S. Code for R.C.C. work /R.B. walling including straightening, cleaning, cutting and bending to proper sharpes and length as per details supplying and binding with 20G annealed black wire and placing in position with proper blocks,supprots,chairs,spacers etc complete. (upto 1st floor level) (b) Other ISI approved TMT reinforcement bar (SAI/BISCON/THERMAX) (For Assam Type Bldg, drain works, retaining wall & boundary wall etc.

Providing form work of 12mm thick plywood board so as to give a rough finish including centering, shuttering, strutting and propping etc.height of propping and centering below below supporting floor to ceiling not exceeding 4.0 m and removal of the same for in situ reinforced concrete and plain concrete work in. 3.2.1.1 Column, pillar, post & strut of square/rectangular/polygonal in plan or any shape like Tee/L etc. having plan vertical face.

Providing & laying plain/reinforced cement concrete works cement coarse sand & 20mm down graded stone aggregate including dewatering if necessary and curing complete but excluding coast of from work and reinforcement for reinforced cement concrete work. (from work and reinforcement will be measured and paid separately) (i) Using mixture machine (a) In Sub-Structure up to plinth level Foundation, footing, colums with base, tie & plinth beam, pile cap, base slab, retaining walls, walls of the septic tank inspection pit and the like and other works not less than 100mm thick up to plinth level. N) with out admixture, plasticiser b) M-20 grade concrete or Prop. 1:1.5:3

Providing and laying plain/reinforced cement concrete works cement coarse sand & 20mm downgraded stone aggregate including dewatering if necessary and curing complete but excluding coast of from work and reinforcement for reinforce cement concrete work. (from work and reinforcement will be measured and paid separately) (i) Using Mixture machine (b) In Super Structure from plinth level up to 1st floor level. (ii) Colums, pillars, posts, struts, suspended floor, roof landing , shelf & support balcony, lintel, sill band, beam, girder, bressumer, cantilever, stair case (except spiral stair case and landing) including preparing the top surface & finishing of nosing. N) Without using admixture, plasticiser b) M-20 grade concrete or prop 1:1.5:3

Brick work in cement morter with 1st class brick including racking out joints and dewatering if necessary, and curing complete as directed . (I) In sub-structure up to plinth level including dewatering if necessary (b) In proportion 1:4

112 mm thick 1st class brick nogged wall in cement mortar including racking out joints and curing complete as directed in super structure above plinth up to 1st floor level (protruding M.S rod/Tor steel of column to be embeded in cement mortar and will be measured and paid separately) A) 112 mm thick brick wall (a). In cement mortar in proportion 1:4.(1 cement:4 sand)

15 mm thick Cement plaster in single coat on rough side of single or half brick wall for interior plastering up to 1st floor level including arises, internal rounded angles, not exceeding 80mm girth and finished even and smooth including curing complete as directed. (A) On rough side (b) In Cement mortar 1:4 (1 cement : 4 sand )

(a) Applying one coat of cement primer of approved brand and manufacture on new wall surface after thoroughly brooming the surfaces free from mortar droppings and other foreign matter and including preparing the surface even and sand papered smooth.

(b) Finishing wall with water proofing cement paint of approved brand and manufacturer and of required shade on new wall surface ( two coats) to give an even shade after thoroughly brooming the surfaces to remive all dirt and remains of loose powdered materials

Supplying fitting and fixing double leaf heavy duty iron gate frame made from 50mm x 6mm M.S flat iron with another horizontal flat at the middle, 20mm dia M.S bars at 200mm apart from bottom flat to top and 20mm dia M.S bars 200mm apart from bottom flat to middle flat including drilling welding etc. complete.

Sri Kishalay Chakraborty