REPAIR REPLACEMENT OF VENTILATORS PVC DOORS TILING IN BLDG NO R36 R37 R38 R39 UNDER AGE BRII OF GE NW NAVY NAGAR COLABA MUMBAI

Amount

Taking down chowkats with shutter (without taking off shutter from the frame) not exc 1.5 sqm each .

All as per Item No 2.00 above but exc 1.5 sqm but n exc 4 sqm each.

S & F factory made solid panel PVC door shutter 30 mm thick (style) consisting of frame made out of M.S. frame shall be covered with heat moulded plain colour PVC 'C' channel having a PVC sheet strip of 2omm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail on either side & as gap insert for top rail & bottom rail; panelling of fplain colour PVC sheet to be fitted in the M.S. frame welded/sealed to the stiles. & rails with suitable PVC sheet beading, and joined together with sovent cement, suppling & fixing in the frame at site as per specification & direction.

S & F solid PVC door frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with M.S. Square tube, fixing in opening as per specification & direction.

M&L machine cut Kota stone ( greenish colour, pre mirror polished) slab in one piece as in double steps cill of aluminium sliding window 18 to 20 mm thick over 20 mm thick screed bed in cement mortar 1:3 complete all as specified.

M&L machine cut Kota stone ( greenish colour, pre mirror polished) slab in one piece as in lintel and and sides of aluminium sliding window 18 to 20 mm thick over 15 mm thick rendering in CM 1:3 complete all as specified and directed.

S & F powder coated anodised aluminium frame/track or shutters for windows, ventilators etc. with one or more rebates including joining cleat for fixing etc.fixed or sliding type/louvered window or ventilator without sash bar, aluminium including necessary joining cleats, glazing clips, rubber packing, anodised alumnium snap beading, screws locking arrangements etc. complete all as specified and directed by Engr-in-Charge. Note: Minimum 25 micron anodisation for all aluminium sections)

M&L aluminium grill with suitable aluminium anodised frame section of ‘F’ section of size 23.4 x 15.3 x 1.4 mm thick manufactured by M/S Deco grill pattern DG-102 (7.5mm dia and aparture 50mm) all complete in repairs.

S&F 4mm thick plain sheet glass ordinary quality and glazing with aluminium and neoprene beads in square n. exc 0.5 sqm in each pane all complete.

S&F 4mm thick frosted sheet glass ordinary quality and glazing with aluminium and neoprene beads in square n. exc 0.5 sqm in each pane all complete.

S & F Aluminium wire cloth, 0.45mm nominal dia of wire and average width of aperture 1.40mm, cut to required size and fixed to Aluminium doors,windows shutter complete all as specified and directed.

Taking down shutters of any description n exc 1 sqm each.

All as per Item No 12.00 above but exc 2 sqm and n exc 4 sqm each.

S&F factory made shutter 35 mm thick second class hard wood glazed and skelton shutters open rebated and prepared to receive glass, gauze etc edges of framing, plain chamfered or rounded fitted with cut and mitred beads fo securing gauge etc suzes of members of shutters as specified in SSR part I section 8 clause 8.24 (a) complete all as specified and directed

S&F 35 mm thick factory made Flush shutters , solid core constrution with block board core and plywood face panels, commercial type on both side complete all as specified and directed

S & F Aluminium wire cloth, 0.45mm nominal dia of wire and average width of aperture 1.40mm, cut to required size and fixed to wooden doors,windows shutter complete all as specified and directed.

S&F 30mm thick flush shutter, solid core construction with block board core and plywood face panels, commercial type on both sides all as specified and directed.

S & F 25mm thick block board, grade-1 quality exterior grade commercial type fixed with screws to timber frame work of width n.exc. 25 cm in shelves or built-in cupbords, almirahs and similar work with lipping patti all complet as directed by EIC.

S&F 100 mm extruded aluminium handles, fabricated type anodised

S&F 100mm aluminium anodised barrel tower bolts of extruded section

S&F 75mm stainless steel medium weight butt hinges all as specified and directed.

S&F 150 mm extruded aluminium handles, fabricated type anodised

S&F 150mm aluminium anodised barrel tower bolts of extruded section

S&F 300 mm long aluminium alloy , anodised sliding door bolt with hasp and staple ( bolt type ) and fixing bolt and sliding bolts of extruded section or cast aluminium alloy.

S&F 140 mm overall length floor door stopper of aluminium alloy body and tongue, anodised with hard drawn steel spring, fixed in floor all complete as specified and as directed by Engr-in-Charge.

S&F hasp and staple safety type,mild steel, wire type, stove enamelled black including bolt to hinge plate and fixed with screws 125mm size complete all as specified and directed.

S&F 100mm size stainless steel medium weight butt hinges all as specified and directed.

M&L for two coat synthetic enamel paint over a coat red pink primer on new wooden surface of any description over 10 cm width or girth not otherwise described including preparation of surface complete all as specified and directed

S&F aluminium serrated finish 20mm dia curtain rod of approved pattern and shade complete all as specified and directed by Engr-in-charge in repairs.

M&L for powder coated aluminium end block, rounded block & brackets fixed in repairs for curtain rod complete all as specifed and directed.

S & F in repairs Aluminium wire cloth, 0.45mm nominal dia of wire and average width of aperture 1.40mm, cut to required size and fixed to doors,windows shutter (wooden/aluminium), with wooden beading (any size)or aluminium wire staples and removing old beading, complete all as specified and directed.

M&L Dismantling floor, hearth, or wall tiling incl cement mortar bedding (but not backing) removing serviceable tiles to store and rubbish off the premises. all as specified.

M&L non-skid coloured Ceramic tiles 6 to 7mm thick (square/ rectangular) area of each tile exceeding 0.06sqm but not excceding 0.11 sqm, in floors etc, set and jointed in epoxy mortar and pointed in white of coloured cement to match including 20 mm thick screed bed in CM 1:6 all as specified.

M&L for rendering 10mm thick in cement mortar 1:4 on backing coat of wall tiles etc complete all as specified and directed.

M & L Coloured glazed ceramic tiles 300 x 200 x 7mm on vertical surfaces set & jointed in neat cement slurry and pointed in white cement mixed with pigment all as specified and as directed.

Dismantling Stone slabs and tiles of any description or thickness in floors, aprons etc.laid bedded and pointed in any mortar

M&L granite (of any type) slab 18 to 20mmthick machine cut,bedded and jointed with grey cement slurry and pointed with white cement with admixture of pigment to match the shade of granite stone including grinding and polishing complete for kitchen plateform /Gate Pillars over 20mm thick screed bed or beddingin cement mortar 1:4 etc complete all as directed .

M&L machine cut cudappah stone 20-25 mm thick over base,laid and jonted with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete.

S&F in repair sink with drainage board made of stainless steel 1mm thick kitchen or laboratry with plugs, washers and wastes; including beading in cement mortar to dwarf wall or including fixing cantilever brackets and connecting union to pipe overall size 915mmX460mm bowl size 410mm X 330mmX160mm complete as directed.

M&L for CI Nahani trap dia of outlet 75mm fixed in repairs including jointing to waste pipe in runlead fixed in cement concrete type B 1 (1:2:4).

S&F PTMT grating doom over Nahani trap and floor trap of 100mm Dia

Taking down cement plaster of any description in any position including racking out joints making key scrubbing down with water etc incl removing of the demolished materials to outside the MD land.

M&L plastering in (CM 1:6) 15mm thick finished even and smooth without using extra cement complete all as specified & directed by Engr-in-Charge.

M&L plastering in CM (1:3), 5mm thick finished even and smooth for ceiling complete all as specified & directed by Engr-in-Charge.

Prepration of new plastered surfaces of walls, pillars, cornices and applying two coat oil bound distemper over a coat of primer including prepration of surface complete all as specified and direceted.

M&L three coats white washing on new plastered surface on ceiling including prepration of surface all as specified and directed

Prepration of old decorated plastered surfaces of ceiling by brooming down or steel brushing scraping down smoke roots, molds, moss and efforescence salts, trading oil greasy spots etc and applying one coat of white wash on ceiling complete all as specified and direceted.

Prepration of old decorated plastered surfaces of walls, pillars, cornices by brooming down or steel brushing scraping down smoke roots, molds, moss and efforescence salts, trading oil greasy spots etc and applying one coat oil bound distemper on walls complete all as specified and direceted.

Preparation of old painted wooden surfacs of any description not otherwise described over 10 cm width or grith and applying one coat of synthetic enamel paint complete all as specified and directed.

Preparation of old painted steel surfacs of any description not otherwise described over 10 cm width or grith and applying one coat of synthetic enamel paint complete all as specified and directed.

Complete removal of existing treatment, preparing surfaces, plastered or unplastered old surfaces priming plastered and other surfaces with alkali-resistant priming paint and applying two coats of distemper oil emulsion, white or tinted on walls incl a coat of wall care putty all as specified.

S&F in repairs High density polyethylene pipes (HDPE) 40mm dia of pressure rating 6 kgf/cm2 fixed complete to wall, floors for drain out the waste water in Kitchen Sink/wash basin complete all as specified and directed.

S&F in repair 32 mm dia PVC flexible waste pipe of suitable length for wash hand basin or urinal complete all as specified and directed

Taking down & S&F GI Tubing medium grade 15mm bore with all fittings, laid in trenches, wall or roof complete all specified and directed.

M&L vitreous china wash down water closet semi padestal pattern (Anglo-Indian type) white (excluding fixing bolts, flushing cistren and flush pipe) with 'P' or 'S' trap incl seat cover complete all as specified fixed in repairs.

S&F in repair Plastic water closet seat cover, white/black, closed pattern with flat bottom, and cover and mild steel chromium plated or aluminisied hinges devices complete all as specified and directed.

S&F in repairs vitreous china wash basin white flat back 550 x 400mm , with fitting of PTMT waste coupling suitable size iincl pillar tap, PVC waste pipe, waste fitting, stop cock, angle iron brackets with painting of brackets etc complete all as specified and directed .

Shelf of PTMT fixed with and including Chromium plated brass screws and wooden/plastic cleats (Minimum weight 300gms)

S & F in repair pillar tap 15mm bore, cast copper alloy fancy type chromium plated, screwed down, high pressure, with crutch or butterfly handle, screwed both ends for iron pipe or for unions and fixed

S&F in repair 15 mm bore angle valves chromium plated screwed down high pressure with cruth or butterfly handle for 15mm dia iron pipe complete all as directed.

S&F in repairs Bib taps, 15mm dia cast copper alloy with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule and fixed

S&F in repair PVC valveless, syphonic action type, flushing cistern, low level, white, 10 ltr capacity with inlet, ball valve, float and handle including brackets complete all as specified.

S&F PVC connection 15mm size with PTMT nuts of length 450mm in repairs

S&F in repair stainless steel soap dish.

sri ram construction

Unitech Enterprises

ASHOK CONSTRUCTION