ADDN/ ALTN/ RENOVATION OF ROOF OF TOOL CRIB IN NEW HANGER AT AFTT AT NDA KHADAKWASLA

Amount

Taking down of existing tarfelt of any description and thickness on roof top including flashing and junction of parapet and cleaning existing roof top surface by brooming , wire brushing incl removing the debrish out complete all as specified and directed

Demolition of Concrete in any description and in any position not otherwise specifically provided for complete all as specified and directed

M & L Cement concrete Type B0 1:2:4 ( using 12.5mm size graded stone aggregate ) in roof padding complete all as specified and directed

M&L for 10mm thick rendering on concrete surface on roof in cement plaster 1:4 finished even and fair without using extra cement by using WPC @ 3% of wt of cement content complete all as specified and directed. Note: Liquid Water proofing Compound shall be measured and paid seprately

Supply only Liquid water proofing compound all as specified and directed

M&L for water proofing treatment on wall,roof,chajja's,gabble walls, edges (at any respective height of bldg ) as following as manufacturer's instructions complete all as specified all as specified and directed (a) preparing plastered surfaces and applying approved bituminous primer @ 0.3 Kg/sqm uniformly to receive APP membrane (b) Applying and stick non-woven polyster matt modified APP Membrane 3mm thick as reinforcement weighing not less than 3.5 Kg/sqm, bonding material 85/25 bitumen 1.2 Kg/Sqm before and after laying membrane laid by torch application and side overlap of 150 mm and over lap of 150 mm longtitudinally, (c)At the junction of roof and parapet wall a groove of 75mm wide and 65mm deep and shaping horizontal of groov with 1:3 with bituminious mastic joints/overlap shall be sealed with hot bitumen 85/25 (d)Applying one coat of aluminium paint on top of the membrane (at any height ) as per manufacturer instructions

Material and labour for providing cement concrete PCC (1:2:4) type B1 (using 20mm size graded aggregates) as in coping to parapet wall/kerbs in roof with projection of 50mm from the outer surface with a groove of 12 mm x 12mm as drip course in bottom side including necessary form work etc complete all as specified and as directed

Taking down rain water pipes (any size or pattern) including all fitting heads, shoes, bends swan -necks complete all as specified and as directed

S&F PVC(SWR) bends any radius, 150 mm bore complete all as specified and as directed

Supply and Fixing 150 mm dia PVC (SWR) pipes single socketed in any length with rubber ring joints fixed to walls including suitable clamps after every one meter of interval complete all as specified and as directed

Dismantling floor or wall tiling of any description and size including cement mortar bedding (but not backing), removing rubbish off the premises complete all as specified and as directed

Dismantling of Stone slabs and tiles of any description or thickness in floors, aprons etc including cleaning off premises (laid, bedded & pointed in any mortar) complete all as specified and as directed

Demolition of unreinforced cement concrete in ground floors and pavings n exc 15 cm thickness (below or above ground level) including cleaning off premises complete all as specified and as directed

M & L 75mm thick cement concrete 1:4:8 type D2 (Using 40mm size graded stone aggregates) as in sub base including use of necessary form work etc complete all as specified and directed .

M&L for Virified Ceramic tiles light shed 10 mm thick (square/ rectangular) polished, area of each tiles not exceeding 0.36 sqm (size 600 x 600), in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match complete all as specified & directed.

All as per item No 15 above but in skirting/vertical surface etc complete all as specified and directed.

Material and Labour for Joint free non-skid coloured ceramic tiles 7 to 8mm thick (square/rectangular) area of each tile exceeding 0.11 Sqm but not exceeding 0.18 Sqm as in flooring etc set and jointed in neat cement slurry and pointed in white or coloured cement to match the tile laid etc complete all as specified and directed

M&L for coloured Glazed ceramic joint free tiles as in vertical surface of Size 450x350x7 mm set and jointed in neat cement slurry laid etc complete all as specified and directed .

M&L for 15 mm thick screed bed or bedding layer in C:M (1:6) for laying floor tiles complete all as specified and directed.

M&L for 10 mm thick rendering in C M (1:4) on vertical surfaces for receiving wall tile complete all as specified and directed.

M&L 20(+ -2mm) thick Granite (of jet black ) work (table rubbed and polished ) in Floor, steps ,jambs ,pillars,window cills, cooking plateforms and like in over 20mm thick cement mortar 1:6 for screed bed including pointing in white cement 1:2 using marble dust with admixture of pigment to match with shade of granite complete all as specified and directed.

Providing edge moulding to 18-20mm thick granite stone of counters vanities etc. including machine polishing to edge to give high gloss finish etc. complete all as specified and directed.

M&L Machine cut cudappah stone slab 20-25mm thick over cement screed base, laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete and incl 20 mm thick screed bed or bedding layer in CM (1:6) complete all as specified and directed.

M&L for glossy finish Chequered cement concrete tiles 20cm X 20cm X 25cm / 30X 30X 30 / 40cm X 40cm X 35mm (as approved) thick, set, jointed and pointed in neat cemeant slurry in floors with grey cement and pigment in floor over 20mm screed bed in cement mortar (1:6) etc complete all as specified and directed

Demolition of brick / block masonry / Stone masonry built in Cement mortar complete all as specified and directed

M&L precast cement concrete 1:3:6 type C-1 ( using 20mm graded aggregate ) block masonry with solid blocks equal or exc10 cm thick in width and setting in cement mortar 1:6 complete all as specified and directed.

Taking down cement plaster on brick or stone walls etc including raking out joints,hacking for key ,scrubbing down with water etc complete all as specified and directed.

M&L for 15 mm thick cement plaster on brick or concrete surface in cement mortar1:6 included finishing surface even and smooth without using extra cement on walls etc complete all as specified and directed

M&L for 10mm thick cement plaster on concrete surface in cement mortar1:3 included finishing surface even and smooth without using extra cement on ceiling etc complete all as specified and directed

M&L for 15 mm thick cement plaster on brick or concrete surface in cement mortar1:4 including finishing surface even and smooth without using extra cement on walls etc complete all as specified and directed

M&L for preparation of new plastered surfaces of walls and applying two coats of oil bound distemper over one coat of alkali registant priming etc complete all as specified and directed.

All as per item No 31 above here-in-before but in ceiling etc complete all as spd and as directed.

M&L preparation of newly plastered surfaces of wall and applying two coats of cement base paint white or tinted including scaffolding arrangement, trestles, ladders etc complete all as specified and directed.

M&L for complete removal of existing treatment of old wall surfaces and applying two coats of cement base paint white or tinted including scaffolding arrangement, trestles, ladders etc complete all as specified and directed.

M& L for complete removal of existing treatment of old wall surfaces and applying 3mm thick wall care putty over prepared plastered surface to receive the surface even and smooth and applying two coats of distempering with 1st quality acrylic distemper (ready mixed) having VOC content less than 50 gms/litre of approved manufacturer of required shade and colour complete over a coat of wall primer as per manufacturer's specification complete all as specified and as directed .

All as per item No 35 above but for Ceiling surface complete all as specified and as directed.

Taking down chowkhats or frame not exc 1.5 sqm each with shutters (without taking off shutters from the frames) complete all as specified and directed

Taking down chowkhats or frame exc 1.5 sq. m but n exc 4 sq m each with shutters (without taking off shutters from the frames) complete all as specified and directed

M&L for pressed steel frame for door with one rebated of size 105 x 60 mm including necessary fixing lugs, hinges , lock strike plate etc complete all as specified and directed

M&L for cement concrete 1:2:4 type BO using 12.5mm graded stone aggregate as in back filing to pressed steel frames etc, complete all specified and directed

S&F 35 mm thick factory made plain framed, panelled shutters with 2nd class hard wood rails and panel of 9mm BWP commercial ply 12mm thick veneered particle board with commercial veneers on both faces.The size of rail or style shall be as per IS 1003 Part-I Kiln seasoned and chemically pressure treated complete all as specified and directed .

S& F Factory made single extruded WPC (Wood Polymer Composite) solid door/ window/ Ceosetory windows & other Frames/ Chowkhat of size 45 x 70 mm comprising of virgin PVC polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/ wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) fabricated with miter joints after applying PVC solvent cement and screwed with full body threaded star headed SS screws having minimum frame density of 750 kg/ cum, screw withdrawal strength of 2200 N (Face) & 1100 N (Edge), minimum compressive strength of 58 N/mm2, modules of elasticity 900 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/ moisture proof and fire retardant and fixed in position with MS hold fast/ lugs/SS dash fasteners of required dia and length complete as per direction of Engineer-in-Charge. (M.S. hold fast/ lugs or SS dash fasteners shall be paid for separately). Note: For WPC solid door/window frames, minus 5mm tolerance in dimension i.e. depth and width of profile shall be acceptable. Variation in profile dimensions on plus side shall be acceptable but no extra payment on this account shall be made complete all as specified and directed.

S&F Factory made single extruded WPC (Wood Polymer Composite) solid plain Panelled door shutter of 30mm size comprising of virgin polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) having minimum density of 650 kg/cum and screw withdrawal strength of 1800 N (Face) & 900 N (Edge), minimum compressive strength 50 N/mm2, modulus of elasticity 850 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/moisture proof and fire retardant and fixing with stainless steel butt hinges of required size with necessary full body threaded star headed counter sunk S.S screws, all as per direction of Engineer-In-Charge. (Note: stainless steel butt hinges and necessary S S screws shall be paid separately)

S&F Door closer hydraulically regulated,designation No. 2,universal type, aluminium (Die cast) body suitable for door shutters of 701 to 850 mm in width and of weight between 36 to 60 kg and fixed etc. complete all as specified and directed

S&F anodised aluminium powder coated frame for doors, windows, ventilators with one or more rebates including joining cleat for fixing etc. complete all as specified and directed

S&F anodised aluminium powder coated door shutter, aluminium section wt 0.55 Kg/m including neccesary joining cleats, glazing clips,rubber neoprene packing, handle 2 nos in each door, hinges, anodised aluminium snap beading screw etc ,complete all as specified and directed

M&L for Powder coated aluminium (minimum thickness of powdercoating 50 micron) work for doors, windows, ventilators and partitions (Fixed portions) with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS: 733 and IS:1285, fixing with dash fasteners of required dia and size,including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle,Aluminium snap beading for glazing/ paneling, C.P. brass/ stainless steel screws, all complete as per architectural drawings and the directions complete all as specified and directed

S & F 12mm thick Veneered particle board exterior grade solid core general purpose type with face veneers of type "BB" fixed with screws to timber frame work/ aluminium frame for partition all as specified and as directed

S&F anodised powder coated ventilators with louvers with partially guaged shutter using 5 mm thick x 10 cm wide frosted glass strips with rubber beading and glazing clips etc using aluminium sections weighing not less than 0.55 Kg/M complete all as specified and as directed

S&F 100mm butt hinges cold rolled mild steel medium weight and fixed complete all as specified and directed

S&F 100mm Aluminium handles, cast type, anodised complete all as specified and directed

S&F 150mm Aluminium handles, cast type, anodised complete all as specified and directed

S&F Aluminium anodised barrel tower bolts of extruded section 100mm long complete all as specified and directed

S&F for Aluminium anodised, barrel tower bolts 150mm long of ex- truded section and fixed complete all as specified and directed

S&F 300 mm long aluminium alloy, anodised sliding door bolt with hasp staple (bolt type) and fixing clips of sheet cast or extruded section and fixing bolts and sliding bolts of extruded sections complete all as specified and directed

S&F 300mm mild steel ordinary rat tail rod pattern springs including roller and roller plate complete all as specified and directed

M & L for Anodised aluminium grill (anodised transparent or dyed to required shade according to IS: 1868 with minimum anodic coating of grade AC 15) of approved design/pattern, with approved standard section and fixed to the existing window frame with C.P. brass/ stainless steel screws @ 200 mm centre to centre, including cutting the grill to proper opening size for fixing and operation of handles and fixing approved anodised aluminium standard section around the opening, complete all as specified and directed

S&F aluminium powder coated three track sliding window with mosquito net two track for glass leaf sliding and one track for mesh leaf sliding outer frame weighing 0.699 Kg/m,75x26 mm size equvalent Jindal model 20671, shutter plain of size 37.5x15mm weighing 0.366 Kg/m, Section No 20690 Jindal), with powder coating of min thickness 50 micron with one or more rebates, sliding type without sash bars, 5mm thickness double tampered clear glass , rubber packing, snap beading screws,with horizontal sliding type with stainless steel mesh, frame, powder coated aluminium grill type AL 925 or equvalent grill, cutting in suitable size and fitting with screws and suitable beedings to aluminum window frame complete etc. complete all as specified and directed

S&F in repair harrison rails 20mm dia, mild steel, chromium plated with fixing brackets, stops, rollers etc.complete all as specified and directed

Dismantling of Wall and ceiling boards (fibre, pulp, insulation, etc.) or insulation boards/slabs/ blankets, any thickness, including cover fillets andincluding re-fixing in position complete all as specified and directed.

S & F 6 mm thick Non asbestos fibre cement building boards fixed or laid/ inserted to timber/GI/Alumi- nium frame work with screw as work in ceiling flat or sloping complete all as specified and directed .

S&F anodised aluminium snap grid frame work Size of grid 605 x 605mm for false ceiling etc complete all as specified and directed.

Taking down 15 mm bore mild steel tubing of medium grade and connections incl cleaning for refixing or removal from site complete all as specified and as directed

All as per above item No 64 above here-in-before but for 20 mm bore

S&F 15 mm bore mild steel water tubing medium grade galvanized with all fittings and fixture fixed to walls ceiling or laid in floors complete all as specified and as directed

All as per above item No 66 above here-in-before but for 20 mm bore

M&L for Cutting chases, pinning in. making good to facings where required and pointing in cement mortar 1:3 to ends or edges of landings, steps, cills, sunshades, shelves, lintels, etc.; and cutting chases for concealed water tubing or concealed conduit wiring in brick walls etc., and making good, cutting not exc 10 cm girth etc. complete all as specified and directed

Dismantling of existing water tanks Exc 500 not Exc 1000 and removing to store complete all as specified and directed

S&F Rotational moulded polye- thylene triple layered water storage tanks 1000 Ltr capacity (cylindrical vertical with closed top) hoisted and fixed in position all as specified in SSR Part I complete all as specified and directed

S&F 20mm dia tank Nipple suitable for HDPE water tank. (Minimum weight 15 mm-38gms/20mm-45gms /25mm- 65gms) including taking down old one as specified & directed.

S&F in repairs Gun metal globe or gate valves, with iron wheel head, screwed both ends for iron pipe 20 mm bore complete all as specified and directed

S&F in repairs Ball valves 20mm dia high pressure of PTMT with epoxy coated Aluminium rod & highdensity plastic ball screwed for iron pipe and fixed. (Minimum weight 15mm-142gms/ 20mm-210gms./ 25mm-455gms/ 40mm - 690 gms) including taking down old one complete all as specified and directed.

S&F in repairs Bib taps 15mm dia, chromium plated ,fancy type ,cast copper alloy with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule and fixed including taking down old one complete all as specified and directed.

S&F in repairs Stop valves 15mm dia, chromium plated ,fancy type, cast copper alloy screwed pressure, with crutch of butterfly handle, screwed both ends for iron pipe for unions and fixed including dismantling of old one complete all as specified and directed .

S&F in repair Oval bowl vitreous china Counter wash basin snow white, fancy type of overall size 560 x 400 x 205 mm, including 32 mm CP waste coupling, CP Bottle trap ,600 mm long PVC Connection pipe etc complete all as specified and directed

S&F for Flush pipe of polyethylene of low or high density or PVC. 32 mm dia, for low level cistern including necessary cutting to floor tiles and connection to WC complete all as specified and directed.

S&F in repair Pillar taps, cast copper alloy, with capstan heads, chromium plated, screwed down high pressure, with or without lettered `Hot' or `Cold' with long screwed shanks and fly-nuts, screwed for iron pipe and fixed , screwed for iron pipe of bore 15 mm complete all as specified and directed

S & F in repair PVC connections 15mm size with PTMT nuts of length 450mm complete all as specified and directed

S&F Health faucet (ABS Body) mild steel chromium plated suitable for 15 mm dia pipe with 1.25 metre long flexible tube and ABS wall hook including making connections and fixed in position complete all as specified and directed

S&F 15 mm two in one angle valve chromium plated with wall flange and fancy type with high pressure screwed down and with CP flange of same make complete all as specified and directed

S&F in repairs vitreous china wash down water closet pan (pedestal pattern), and trap white (excluding flushing cistern) including connection to drain (or outgoing pipe) and to fushing pipe, seat cover, antisyphonage pipe etc complete all as specified and directed

S&F in repair Water closet (Squatt pattern) vitreous China squatting pan, ‘Orissa’ pattern, size 580 x440 mm white, with integral foot rests (excluding flushing cistern and flush pipe) connection to trap and squatting pan including P' trap set in and including concrete etc. complete all as specified and direted including making good to floor complete all as specified and directed

S&F in repairs for PVC flushing cistern valve less, syphonic action type low level, ball valve, float and handle with bracket fixed in repair of 10 ltrs capacity all as specified and directed

S&F in repair Soap dish any type fixed to plugs with chromium plated brass screws minimum size 160x160x90mm complete all as specified and directed

S&F in repair towel rail 600 mm long of CP brass, fixed with chromium plated brass screws and wooden/plastic cleats complete all as specified and directed

S&F in repair Vitreous China urinals, bowl type of size 465 x 355 x265mm (back or corner wall type), complete including providing and fixing plugs, bedding urinal against wall in cement mortar 1:2, securing urinal to plugs with and including 60mm long brass screws, pointing around urinal back in cement; fixing flushing with brackets,flush pipe, grating and Union for discharge pipe complete all as specified and directed . (Exclusive of fixing supply pipe to flushing, trap and waste pipe)

S&F for Brass Urinal Spreader, automatic in urinals etc complete all as specified and directed.

S & F Toilet paper holder with flat recessed type stainless steel or chromium plated brass screws Complete all as specified and directed

S&F in repairs Stop valves 15mm dia, fancy type, chromium plated with long shank and cup (concealed type) ,cast copper alloy screwed pressure, with crutch of butterfly handle, screwed both ends for iron pipe for unions and fixed including dismantling of old one complete all as specified and directed

Dismantling of cast iron 100 mm bore pipes jointed in cement motar complete all as specified and directed.

Dismantling of cast iron 75 mm bore pipes jointed in cement motar complete all as specified and directed.

S&F 75mm dia PVC (SWR) pipes single socketed in any length with rubber ring joints fixed to walls or floor complete all as specified and directed.

S&F 110mm dia PVC (SWR) pipes single socketed in any length with rubber ring joints fixed to walls or floor complete all as specified and directed.

S&F for 75mm bore dia PVC (SWR) bends with access door complete all as specified and directed.

S&F for 110mm bore dia PVC (SWR) bends with access door complete all as specified and directed

S&F for 110mm dia PVC (SWR) branch piece single(single Y) equal or unequal with access door complete all as specified and directed

S&F for 110mm dia PVC (SWR) vent cowl complete all as specified and directed

M&L for 75mm dia PVC (SWR) floor trap, plain with grating including jointing with solvent cement complete all as specified and directed

M &L Preparation of new wooden surfaces of any description ,not otherwise described over 10 cm width or girth and applying two coat of synthetic enamel paint over a coat of pink primer complete all as specified and directed

M&L for Providing precast cement concrete 1:2:4 type B-1 ( using 20mm graded aggregate ) in win- dow or door cills, lintels, bressumers, steps, quoin blocks (for use with masonry), string courses, copings. kneelers, apex stones, pier caps, columns, posts, boundary pillars, bed plates, pintle blocks, ancho-rage blocks, bonders (for stone walling). corbels, brackets, etc. (of any section indicated), with plain fair faces, including chamfers, weatherings, throat- ing etc. and setting in cement mortar 1:6 complete with joints to match complete all as specified and directed

M & L Formwork to edges of concrete flats, breaks in floors, openings in concrete/brick walls, floors and roofs and sides of RCC/PCC bands in walls and chajja , horizontal or sloping, and similar work all exceeding 20cm wide complete all as specified and directed

S&F for 1.00 mm thick plain galvanised, mild steel sheeting as in roof, wall,gate, ridges hips, valley gutters, drip qnd strqaight flashings with grade of zinc coating 275 gm/Sqm and fixed with nut bolt at any height complete all as specified and directed

S&F PVC(SWR) bends any radius, 110 mm bore complete all as specified and directed

Supply and Fixing 110 mm dia PVC (SWR) pipes single socketed in any length with rubber ring joints fixed to walls including suitable clamps after every one meter of interval complete all as specified and directed

S & F for Joist, channel, angle, or tee section, fixed independently, with out connecting plates etc ( cut to ordinary length) i.e. within 20mm of the length indicated, angle iron fabrication Erection and fixing at any height. Confirming to Fe 410-W (Gde-E-250 Quality-A) complete all as specified and directed

M&L for two coats of synthetic enamel paint over a coat of Red oxide primer including preparation of new steel/iron surface of any description over 10 cm in width or girth complete all as specified and directed

Taking down exiting copper/aluminium point wiring (light, fan, socket or power) complete, including fixture and fittings such as switches, ceiling roses, pendants, regulators, sockets, light fitting etc. removing materials to store for keeping in safe custody or for taking credit (credit for above items should be made as per conditions separately) and making good disturbed surfaces of walls, floors, etc complete all as specified and directed

M&L for concealed point wiring in and including new PVC conduit medium grade with the help of multi-stranded unsheathed FRLSH copper cable 1.5 sqmm 650/1100V conforming IS:3419 -1988 adhereing to colour code including earth wire of the size 1.5 Sqmm green colored with modular steel or cast iron terminal boxes and modular cover plates as required at site including making good the distrubed surfaces and matching it with existing surface for the following :- (a) One light/Fan point controlled by one way switch 6 Amps 240 volts

Diito all as per item No.111 above but One 3 pin socket outlet, 5/6 Amps on the same board with other switches

Diito all as per item No.111 above but One 3 pin socket outlet, 5/6 Amps, independent

M&L concealed point wiring with 4 sq mm copper conductor FRLSH (multistrand) PVC insulated ISI marked unseathed cable in and including PVC conduit not less than 25 mm with all fitting & other accessories and also including PVC insulated ISI marked unseathed FRLS cable size 4 sq mm copper conductor as earth wire to common earth dolly complete all as specified and directed.

S&F modular switch 1 way 10 A 1 module complete all as specified and directed

S&F Modular socket 6 A 2/3 Pin 2 module complete all as specified and directed

S&F modular switch 1 way 16 A 1 with indicator module complete all as specified and directed

S&F Modular socket 6 A/16A 2/3 Pin 2 module complete all as specified and directed

S&F modular BLDC fan regulator, 2 module, suitable for ceiling fan of 1200/1400mm sweep all as specified and directed.

S &F for Ceiling rose 3 terminals /PVC/Polycarbonate isolated body complete all as specified and directed

S & F RJ-11 telephone socket with transparent shutter 2 module alongwith flush metal box 2 module and front cover plate 2 module complete all as specified and directed

S &F for LAN RJ-45 Jack With Cat 6 socket UTP Cat with transparent shutter 1 module alongwith flush metal box 1 module and front cover plate 1 module complete all as specified and directed

S&F HDMI socket with transparent shutter 1 module alongwith flush metal box 1 module and front cover plate 1 module complete all as specified and directed

M&L for Provn of PVC conduit for Telephone/TV/LAN/CCTV not less than 25 mm with Cutting chases for concealed conduit wiring, pinning in and making good to surface where required and pointing in cement mortar 1:3 to ends or edges of landings, steps, cills, sunshades, shelves, lintels etc., cutting not exc 10 cm girth including 3 mm thick wall care putty on wall, making surface matching to adjacent surface all as specified and directed.

Taking down ceiling fan/Exhaust Fan,Sealing Cable,dismantling blades and removing fan and blades to E/M store as directed by Engineer in Charge and making good disturbed surfaces of walls, floors, etc complete all as specified and directed

S&F in repalcement Reces mounted 2' x 2' LED Panel lights 40 W LED 6500K, 240Volts and glare free symmetrical illumination suitable for MOC HPL ceiling, Environmental friendly, new generation, energy saving, high power LED as a light source with clear diffuser including connecting with twin core wire and also matching to the adjacent ceiling surfaces carefully all as specified and directed. Note: The quoted price shall include the cost of Light and its driver.

S&F in replacement of 12 watt,230V surface and wall mounted warm white LED Mirror Light including connecting up with twin core twisted flexible copper condctor cable from ceiling rose all as specified and directed .

Supply and fixing ceiling fan complete with blades, down rods and other accessories, 230 V, 1200 mm sweep with Minimum air delivery of 210 CMM BEE Five star rated with brushless direct current motor (BLDC), white/Ivory in colour all as specified and directed .

S&F of Plastic ventilation Energy Saving Exhaust Fan with BLDC Motor fan of 200 mm sweep inclduing replacing the plywood as per the site requirement all as specified and directed .

M&L for Cutting chases for concealed conduit wiring, pinning in and making good to surface where required and pointing in cement mortar 1:3 to ends or edges of landings, steps, cills, sunshades, shelves, lintels etc., cutting not exc 10 cm girth including 3 mm thick wall care putty on wall, making surface matching to adjacent surface all as specified and directed.

Taking down exiting copper/aluminium sub main wiring complete for taking credit (credit for above items should be made as per conditions separately) and making good disturbed surfaces of walls, floors, etc as directed .

M&L for concealed sub main wiring with two single core PVC insulated FRLSH cables with stranded copper conductors 2.5 Sqmm , 1100 Volts grade in and including PVC conduit medium grade with all fitting & other accessories and copper cable 2.5 sqmm continuous earth wire complete all as specified and directed. Note: Two runs of 2.5 Sqmm cable with 01run of 2.5 Sqmm earth wire along with PVC conduit medium grade shall be measured as one RM

M&L for concealed sub main wiring with two single core PVC insulated FRLSH cables with stranded copper conductors 4 Sqmm , 1100 Volts grade in and including PVC conduit medium grade with all fitting & other accessories and copper cable 4 sqmm continuous earth wire complete all as specified and directed . Note: Two runs of 04 Sqmm cable with 01run of 4 Sqmm earth wire along with PVC conduit medium grade shall be measured as one RM

M&L for concealed sub main wiring with four single core PVC insulated FRLSH cables with stranded copper conductors 6 Sqmm , 1100 Volts grade in and including PVC conduit medium grade with all fitting & other accessories and copper cable 4 sqmm continuous earth wire complete all as specified and directed . Note: Four runs of 06 Sqmm cable with 01run of 6Sqmm earth wire along with PVC conduit medium grade shall be measured as one RM

Supply and fix in replacement sheet metal enclosures single pole MCB 20 Amps with a two pin and earth plug and socket complete with all accessaries etc all as specified and directed .

S&F in replacement MCB DB 8 way SPN Double door sheet metal enclosure factory made suitable for MCB DB's 240 volts,concealed in wall complete including taking down the existing DB of any type & size alongwith its accessories by removing from existing circuits and refixing the new DBs and circuits complete as reqd at site complete all as specified and directed . Note - MCBs will be measured & paid separately under respective item of sch A, if required to be replaced.

S&F in repairs factory made epoxy powder coated Distribution Board TP & N 4 way double door (VTPN MCCB DB) MCCB as In comer, with metal door (IP-43 protection) fabricated from CRCA sheet and fixed flush to wall and suitable for universal mounting and including 200 Amp copper bus bar, neutral bar, standard DIN rail, Earth bar and cable ties for cable management, top and bottom removable gland plates with Knockout flush to wall and making good disturbed surface and touch up with the same finishes complete all as specified and directed Note:MCBs/ MCCBs will be measured and paid seperately under respective Sch A item in the schedule

S&F in replacement of MCB SP 6 to 32 Amps 240V,10 KA breaking capacity , C curve as per IS/IEC 60898-1 2002 with IP 20 protected terminals all as specified including complete connection with copper /aluminium cable lugs with suitable size for incoming and outgoing complete all as specified and directed

Supply and fix in replacement of C Curve MCB SPN 40 Amps working on 240 volts, 50 HZ,10 KA all as specified and directed

S&F in repairs MCCB with rating of 125 Amps, 415 Volts 4 pole with 16 kA breaking capacity,thermal magnetic asdjustable of overload & short circuit release as per IS-13947 & IEC 60947-2 & the service short circuit breaking capacity (Ics) should be equal to ultimate breaking capcity(Icu). MCCB should be with suitable spreaders and phase barriers for each terminals complete all as specified and directed.

Earthing complete with galvanised iron earth plate electrode 600 x 600 x 6mm as earthing lead buried directly in ground vertically to depth not less than 2.25 mtr below GL with the top edge of the plate not less than 1.5 mtr from GL, connected to GI earth lead of 4.0mm dia, by means of bolts & nuts, to GI and connected to earthing test point all as shown in elecrical plate No. 3 of SSR Part-I of 2009* specified or indicated and testing on completion including excavation / earth work in any type of starta, PCC (1:3:6) type C1 earthing chamber pre cast slab 50 mm thick in cement concrete (1:2:4) type B1, reinforced with welded steel wire fabric (XPM) weight not less than 4 KG/sqm cast iron frame, funnel with wire mesh GI watering pipe of 20 mm bore medium grade and lugs with and including GI earth wire 4 mm dia with GI protection pipe of 15 mm medium grade 7.5 meter long etc complete tested on completion all as specified and directed. Note: a). Rate quoted shall deemed to include cost of excavation in any type of strata, RFR and removal upto 50metre, PCC pit, funnel and RCC cover plate. b). GI wire above 7.5m will be measured and paid seperately.

Supply and fixing high speed wall mounted fan with BLDC motor fan of sweep 400 mm sweep, auto thermal overload protection compact style and powder coated fan blade guard and pull cord switch for speed egulation and oscillation control incl connecting up the power cord to the socket nad necessary fixing accessories all as specified and directed.

S&F LED Building Security Light/Street Light fiitting 35 W,IP-65 protection made up of die cast aluminium housing with high power LED as lighting source complete fixing with GI bracket made out of 40mm bore GI pipe light grade 1.2 Mtr long bend to shape and fixed to pole/wall with necessary MS clamp accessories complete all as specified and directed .

S&F 1x 18 watt,230V surface mounted LED downlight with white powder coated polycarbonate housing and pressure die-cast heat sink having high efficiency, including connecting up with twin core twisted flexible copper condctor cable from ceiling rose all as specified and directed. Make: Havells Cat No EDGESURFACERDDLR12WLED840S or equivalent make as mentioned at list of makes in PS

Dismantling and refixing the ceiling fan/Exhuast Fan complete of any size cleaning ,servicing,painting,greasing to bearings checking of nut bolts,quarter pins,split pins,bushes ,capacitor and complete spray painting all as directed . Note Expendable stores like cotton waste /cleaning materials,grease,lubricants,machine screws ,safety split pins nut bolts and transportation incl hanging of ceiling of fans are incl in unit rate

Sky Vision Construction (BID ID -3399056)

SANDHYA ENTERPRISES (BID ID -3399571)

OM GANESH CONSTRUCTION (BID ID -3400392)

Sarkar Enterprises (BID ID -3407543)