REPAIR/MAINT AND DAY TO DAY COMPLAINT OF INTERNAL WIRING/FIXTURE, EXHAUST FAN/CEILING FAN, POST TOP LANTERN, BOLLARD LIGHT, BUILDINGS SECURITY LIGHT, FLOOD LIGHT AND MISC E/M ITEMS IN OFFICE COMPLEX, W/S INSTALLATION E/S BUILDING SUB STN UNDER AGE

Taking down copper/aluminium point wiring (light, fan, socket or power) complete, including fixture and fittings such as switches, ceiling roses, pendants, regulators, sockets, light fitting etc. removing materials to store for keeping in safe custody or for taking credit (credit for above items should be made as per conditions separately) and making good disturbed surfaces of walls, floors, etc complete all as specified and directed by Engr-in-Charge.

M&L for point wiring complete with 1.5 sqmm single core PVC insulated FRLS cable 1100 volts grade with multi stranded copper conductor drawn through and including non-metalic rigid PVC conduit medium grade ISI Marked and all conduit accessories concealed in wall/fixed to roof/truss/columns etc and including provision of 1.5 sqmm PVC insulated copper cable FRLS as earth continuity conductor, fabricated branded modular metal flush box duly make embossed, concealed in walls with suitable modular inner and outer plate for housing modular switches , socket outlet and fan regulators etc , for the followings:- (a) One light/Fan/bell/Exhaust Fan/Fresh Air Fan point controlled by one switch complete all as specified and directed by Engr-in-Charge.

All as per item No 2 above but for one multipin socket outlet 5 Amp on the same board with other switches complete all as specified and directed by Engr-in-Charge.

All as per item No 2 above but for one multipin socket outlet 5 Amp but using 2x 1.5 + 1 x 1.5 sqmm multistranded FRLS copper cable on the independent board complete all as specified and directed by Engr-in-Charge.

All as per item No 2 above but for one multipin socket outlet 15 Amp, but using 2 x2.5 +1 x 2.5 sqmm multistranded FRLS copper cable, independent board complete all as specified and directed by Engr-in-Charge.

Supply, laying and drawing in and including 20 mm dia pvc conduit pipe including cutting of chases for laying conduit making good the surfaces as per existing surfaces or as directed on walls 02 runs of IC x 6.00 sqmm (Main Cable and neutral) and one run of IC x 6 sqmm (as earth wire) of stranded copper conductor PVC insulated unsheathed cables of 1100 volts grade conforing to IS : 694 of 1990 complete all as specified and directed by Engr-in-Charge. Note:- Two run of 6.00 sqmm multistranded copper cable & one run of 6.00 sqmm copper cable as earth wire including pvc conduit will be measured as one unit length

M&L for point wiring using approved colour coding as per IS by using FRLS PVC insulated 1.5 Sqmm multistranded,1100 volt grade copper conductor cable unsheathed type, alongwith 1.5 Sqmm FRLS PVC insulated stranded copper conductor cable for continous earthing in & incl pvc conduit pipe point wiring with accessories having ISI mark for one light/fan/bell point controlled by one switch complete all as specified and directed by Engr-in-Charge.

All as per item No 7 here-in-before but for one multipin socket outlet 5 Amp but using 2x 1.5 + 1 x 1.5 sqmm multistranded FRLS copper cable on the independent board complete all as specified and directed by Engr-in-Charge.

All as per item No 7 here-in-before but for one multipin socket outlet 15 Amp, but using 2 x2.5 +1 x 2.5 sqmm multistranded FRLS copper cable, independent board complete all as specified and directed by Engr-in-Charge.

M&L for point wiring with 3x1.5 Sq mm (nominal area) FRLS PVC insulated un-sheathed and stranded copper conductor cable (phase, neutral and earth wire) in existing concealed conduit, earth wire connected to common earth dolly with and including pressed steel sheet Metal sunken box of suitable size for fixing switches/sockets etc with cover plate/3mm thick plastic laminated sheet for one light/fan/fresh air/exhaust fan point complete all as specified and directed by Engr-in-Charge.