REPAIR/MAINTENANCE OF INTERNAL ELECTRIFICATION INCLUDING FITTINGS AND FIXTURES, FLAME PROOF LIGHTS, HIGH BAY LIGHTS, LIGHTNING PROTECTION AT TECHNICAL AREA AT MANKHURD UNDER GE (NW) MANKHURD

Amount

Taking down copper/ aluminum point wiring (Light/Fan/Socket or power) complete including fixtures and fittings such as switches, ceiling roses, pendants, regulators, sockets light fitting etc. Removing materials to store for keeping in safe custody or for taking credit (credit for above items should be made as per conditions separately) and making good disturbed surfaces to walls floors etc.

M & L for Taking down of aluminium/copper strip of any size laid as roof conductor, down conductor, earth contunity conductoor including air termination rod from any position / location of sheds/ buildings of height up to 30 meter & refixing the same after straightning the conductor/removal of bends, including replacing the old insulators with new one and saddles all as directed at site Note -i) The quoted rae is deemed to inclusive of T & P/scaffolding/staging etc for executing the work in buildings of height up to 30 meter. ii) The rate is deemed to be inclusive for providing Procealin insulator, screws, Plugs iii) PCC Block required shall be measure and paid under respective items

Refixing the aluminium/copper strip of any size from any position / location of sheds/ buildings of height up to 30 meter & laid as roof conductor, down conductor, earth contunity conductoor same after straightning the conductor/removal of bends, including replacing the old insulators with new one and saddles all as directed at site Note -i) The quoted rae is deemed to inclusive of T & P/scaffolding/staging etc for executing the work in buildings of height up to 30 meter. ii) The raete is deemed to be inclusive for providing Procealin insulator, screws, Plugs iii) PCC Block required shall be measure and paid under respective items iv) Span of PCC Block support shall be kept at 70 cm. v) Span of insulation support (without block) shall be fixed at 30 cm space.

Taking down of Old MCB DB of any size any type.

M & L for point wiring with PVC insulated unsheathed 1100 Volts grade single core FRLS multistranded copper conductor cable 1.5 Sqmm drawn in and including PVC casing-caping and accessories, fixed on wall / ceiling etc with neccessary fixing accessories and earth continuity FRLS multistranded copper conductor cable size connected to common earth and earth dolly including 2 mm thick pressed steel terminal boxes concealed in wall covered with laminated sheet top cover 3 mm thick for mounting switches / sockets / fan regulators fixed with Cadmium plated machine screws all as specified for the following: Note:- All points to be made in Hangers/Sheds, hight up to 10 Meters only. (a) For one light, fan, call bell, point controlled by one switch.

(b) For one socket point controlled by one switch on same board

(c) For one 5Amp independent socket point controlled by one switch.

All as per item No 5 above but for power point wiring with 2.5 Sqmm PVC-FRLS insulated, unsheathed, copper conductor, multistranded 1100 volt grade cable and 2.5 Sqmm PVC-FRLS insulated, unsheathed, copper conductor, multi stranded 1100 volt grade cable as continuous earth lead.

M&L circuit wiring in repairs with two single core PVC-FRLS insulated unsheathed multi stranded copper conductor cable of size 1.5 sqmm drawn in MS Steel conduit with 1.5 Sqmm PVC-FRLS insulated unsheathed multi stranded copper conductor as a continuous earth wire complete including rigid stove enameled steel conduit ISI marked of size not less than 20 mm dia in concealed/surface wiring inclusive all fitting such as tee, bends, reducer, elbow, bell mouth, tube ends and all fixing accessories such as couplers lock, nuts, sadles, pipe hooks etc fixed properly including taking down old unserviceable wiring complete. Note : 1. M S Conduit/ PVC Conduit will be measured and paid separately. 2. wiring in shed upto height of 6 mtr. 3. Three run of 1,5 Sqmm wire will be measured & paid as one unit.

M&L sub main wiring with two single core PVC-FRLS insulated unsheathed multi stranded copper conductor cable of size 2.5 sqmm drawn in MS Steel conduit with 2.5 Sqmm PVC-FRLS insulated unsheathed multi stranded copper conductor as a continuous earth wire complete including rigid stove enameled steel conduit ISI marked of size not less than 20 mm dia in concealed/surface wiring inclusive all fitting such as tee, bends, reducer, elbow, bell mouth, tube ends and all fixing accessories such as couplers lock, nuts, sadles, pipe hooks etc fixed properly including taking down old unserviceable sub main wiring complete. Note : 1. M S Conduitwill be measured and paid separately. 2. wiring in shed upto height of 6 mtr.3. Three run of 2.5 Sqmm wire will be measured & paid as one unit.

M&L sub main wiring in repairs with two single core PVC-FRLS insulated unsheathed multi stranded copper conductor cable of size 4 Sqmm drawn in MS Steel conduit with 4 Sqmm PVC-FRLS insulated unsheathed multi stranded copper conductor as a continuous earth wire complete including rigid stove enameled steel conduit ISI marked of size not less than 20 mm dia in concealed/surface wiring inclusive all fitting such as tee, bends, reducer, elbow, bell mouth, tube ends and all fixing accessories such as couplers lock, nuts, sadles, pipe hooks etc fixed properly including taking down old unserviceable sub main wiring complete. Note : 1. M S Conduit will be measured and paid separately. 2. wiring in shed upto height of 6 mtr.3. Three run of 4 Sqmm wire will be measured & paid as one unit.

S&F in repairs rigid metallic medium 20 mm dia stove enameled steel conduit ISI marked in concealed position inclusive all fitting such as tee, bends, reducer, elbow, bell mouth, tube ends and all fixing accessories such as couplers lock, nuts, saddlers, pipe hooks etc fixed properly on as in concealed position all as directed by Engineer-in-Charge.

M&L sub main wiring in repairs with two single core PVC-FRLS insulated unsheathed multi stranded copper conductor cable of size 1.5 sqmm drawn in Existing surface/recessed MS Steel conduit/PVC Conduit with 1.5 Sqmm PVC-FRLS insulated unsheathed multi stranded copper conductor as a continuous earth wire complete including rigid stove enameled steel conduit ISI marked of size not less than 20 mm dia in concealed/surface wiring inclusive all fitting such as tee, bends, reducer, elbow, bell mouth, tube ends and all fixing accessories such as couplers lock, nuts, sadles, pipe hooks etc fixed properly including taking down old unserviceable sub main wiring complete. Note : 1. M S Conduit will be measured and paid separately if required on ground. 2. wiring in shed upto height of 6 mtr.3. Three run of 1,5 Sqmm wire will be measured & paid as one unit.

M&L sub main wiring in repais with two single core PVC-FRLS insulated unsheathed multi stranded copper conductor cable of size 2.5 sqmm drawn in Existing surface/recessed MS Steel conduit/PVC Conduit with 2.5 Sqmm PVC-FRLS insulated unsheathed multi stranded copper conductor as a continuous earth wire complete including rigid stove enameled steel conduit ISI marked of size not less than 20 mm dia in concealed/surface wiring inclusive all fitting such as tee, bends, reducer, elbow, bell mouth, tube ends and all fixing accessories such as couplers lock, nuts, sadles, pipe hooks etc fixed properly including taking down old unserviceable sub main wiring complete. Note : 1. Additional M S Conduit/ PVC Conduit will be measured and paid separately if required . 2. wiring in shed upto height of 6 mtr.3. Three run of 2.5 Sqmm wire will be measured & paid as one unit.

M & L for Opening switch mounting plate, rectifying the defects in fittings and fixtures by tightening loose connections or taking down of unserviceable/burnt Piano Switches, fan regulators, 5 Amps Sockets, 15 Amps Sockets, 5 Amps Switch socket Commbination, 15 Amps Switch Socket combination, Fan Regulators. Note :- (i) The representative of the contrcator (Supervisor - 1 No, Electrician Skilled - 1 No, Helper - 1 No) shall report to Engineer-in-charge/JE and carry out repairs on daily basis during the contract period (ii) Replacement of defective parts/items will be measured and paid as supply and fix under respective items herein below. (iii) The work shall be executed in buildings of Bureau of Sailors, INS Tanaji, NAD Depot, WED & Saw mill.

M & L for taking down of Light fittings such as 1 X 40 W, 1 X 20, 1x10 Watts tube light fittings, CFL light/LED fittings for repairs & refixing the same after carrying out repairs . Note :- (i) The representative of the contrcator (Supervisor - 1 No, Electrician Skilled - 1 No, Helper - 1 No shall report to Engineer-in-charge/JE and carry out repairs on daily basis during the contract period (ii) Tube Rod, CFL lamps, Choke & Starter required to be replaced shall be paid under respective item of this schedule as Supply & fixing. (iii) Minor spares such as holders, connectors, wires are deemed to be inclusive of the quoted rate. (iv) The work shall be executed in buildings of Bureau of Sailors, INS Tanaji, NAD Depot, WED & Saw mill.

M & L for opening of MCB DB /MCCB DB front door & replacing of burnt wires & tesing comple after carrying out repairs . Note :- (i) The representative of the Contractor (Supervisor - 1 No, Electrician Skilled - 1 No, Helper - 1 No shall report to Engineer-in-charge/JE and carry out repairs on daily basis during the contract period (ii) MCCB & MCB required to be replaced shall be paid under respective item of this schedule as Supply & fixing. (iii) Minor spares such as connectors, wires, lugs are deemed to be inclusive of the quoted rate. (iii) The work shall be executed in buildings of Bureau of Sailors, INS Tanaji, NAD Depot, WED & Saw mill.

M & L for rewiring of old burnt out copper wiring in LT Panels/LT Feeder, replacing of damaged cable Glands, burnt cable lugs, bus bar link, connectors, damaged insulators, burnt copper cables, door hinges, panel door locks & scrapping of old paints & applying two coats of paint all as directed by Engg-in Charge

Supply & Fix in repairs switch piano single pole flush type 5A, 240 V one way complete.

Supply & Fix in repairs Bell push flush type 5 amp, 250 Volts complete.

Supply & Fix in repairs switch socket combination 2 in 1 , 5 Amps multipurpose flush type complete

Supply & Fix in repairs switch socket combination 2 in 1, 3 pin, 5 and 15 Amps flush type universal.

Supply & Fix in repairs Ceiling rose surface bakelite three terminal, 240 V complete.

S&F, in replacement, electronic socket size, rotary, 5 speed step type regulator, 120-230 V white finish complete conforming/ ISI Marked all as specified.

Supply and fix in repairs bell ding dong AC 230 V single pole.

S & F in repairs Modular Socket 6 A, 2/3 Pin Combined, inclusive of modular cover plate & box as per combination of points Make - Anchor/ Roma/ Havells

S & F in repairs Modular Socket 6/16 A, 2/3 Pin Combined inclusive of modular cover plate & box as per combination of points Make - Anchor/ Roma/ Havells

S & F in repairs Modular Switch single pole 1 Way 6 Amps inclusive of modular cover plate & box as per combination of points Make - Anchor/ Roma/ Havells

S & F in repairs Modular Switch single pole 1 Way 16 Amps inclusive of modular cover plate & box as per combination of points Make - Anchor/ Roma/ Havells

S&F in repairs ULTRON LED polycarbonate T8 tube 20 Watt with in built driver with metal heat sink, double sided connection, 230 volts including fixing arrangements and taking down old unserviceable tube rod complete , the rod shall conform to Cat No. LT8-20-865-(2) of Crompton / Havells /Bajaj

S&F in Repairs/Replacement Surface and wall mounted batten suitable for LED tube 20-22 watts, 230 volts, including fixing mounting blocks 2 Nos, 1.5 sqmm 3 core PVC insulated copper conductor cable including fixing arrangements and taking down old rusted bracket fittings complete . The fitting shall conform to Cat No.IGP161LTLT8-16 of Crompton /Havells /Bajaj/Jaquar

Supply and fix in repairs decorative recessed type LED light fitting 35/36 watt (size 2'x2') 220 V AC recessed type with high efficiency PMMA diffuser soft glare free light complete with driver, holders & LED lamp suitable for roof ceiling including connecting up with driver three core flexible copper conductor cases of suitable size, including making addition/altn to existing false ceiling and providing of false ceiling sheets, aluminium frames including fixing arrangements and taking down old rusted bracket fittings complete etc. The fitting shall conform to Cat No.LCTLRP-36-F0-CDL of Crompton / Havells /Bajaj/Jaquar/Wipro

Supply & fix in repairs recess & surface LED 1 ft x 4 ft panel ceiling light fitting 40 Watt (SPAN) with high brightness SMD LED as light source and including driver unit, including provision of 3 core copper flexible cable size 1.5 Sqmm from ceiling rose to connector, including making addition/altn to existing false ceiling and providing of false ceiling sheets, aluminium frames including fixing arrangements complete etc.The fitting shall conform to Cat No. LCTLRN-40-CDL(1X4) of Crompton / Havells /Bajaj/Jaquar/Wipro

Supply & fix in repairs LED Highbay light fittings 150 watts, Energy saving, environment friendly & robust open type vertical Highbay LED IP 66 luminaire including driver and required GI tube down road of length up to 2 meter with hoooks for hanging the fitting. The fitting including fixing arrangements and taking down old rusted bracket fittings complete etc. The fitting shall conform to Cat No.LHBN-150-CDL/60-M of Crompton / Havells /Bajaj /Jaquar/Wipro Note : Fittings shall will be installed in Hangers/Sheds, height up to 10 Meters only and directed by Engr-in-Charge.

Supply & fix in repairs very high efficiency round LED Highbay light fittings 150 Watt in PDC housing, IP 66 luminaire including driver and required GI tube down road of length up to 2 meter with hoooks for hanging the fitting including fixing arrangements and taking down old rusted bracket fittings complete etc. The fitting shall conform to Cat No. CIP-320-150-57-60D-HL4-GL-NSR of Crompton / Havells /Bajaj/Jaquar/Wipro Note : Fittings shall will be installed in Hangers/Sheds, hight up to 10 Meters only and directed by Engr-in-Charge.

S&F in repair of building Security light fitting made up of pressure die cast alluminium body with mid power 60 Watt LED (PINNACLE PLUS) as lighting sources and PC cover having Top opening seperate driver compartment with IP66 protection Including fixing arrangements and taking down old rusted bracket fittings complete all as per directed by Engr- in – charge. Make-:Crompton / Havells /Bajaj/Jaquar/Wipro

M & L in repairs for GI steel tubing medium grade 40mm dia and length up to 1.5 meter bent to shape of offset angle upto 45degree for fixing of security /street light fittings including MS clamps made of 40mm x5mm flat iron, nuts , bolts, etc all as directed by Engineer in charge

Supply & Fix in repairs MCCB DB TPN 4 Way double door prewired suitable for Triple Pole 125 A incomer MCCB with the following acessories, a) MCCB TP 125 A 25 KA 415 Volt - 1 Nos b) Bus bar, Din rail , Neutral link Make - Havells/Indoasaian/Legrand/ABB/Schnider

Supply & Fix in repairs MCB DB SPN 2 way 240 volts Single door, including connecting up with existing cable with new lugs The DB Shall be of Make - Havells/Indoasaian/Legrand/ABB/Schnider

Supply & Fix in repairs MCB DB SPN 4 way 240 volts Double door 200 Amps rated bus bar, including connecting up with existing cable with new lugs The DB Shall be of Make - Havells/Indoasaian/Legrand/ABB/Schnider

Supply & Fix in repairs MCB DB SPN 8 way 240 volts Double door 200 Amps rated bus bar, including connecting up with existing cable with new lugs The DB Shall be of Make - Havells/Indoasaian/Legrand/ABB/Schnider

Supply & Fix in repairs MCB DB SPN 12 way 240 volts Double door 200 Amps rated bus bar, including connecting up with existing cable with new lugs The DB Shall be of Make - Havells/Indoasaian/Legrand/ABB/Schnider

Supply & Fix in repairs TPN DB 4 way 415 volts Double door, including connecting up with existing cable with new lugs The DB Shall be of Make - Havells/Indoasaian/Legrand/ABB/Schnider

S&F in repairs single pole and neutral enclosure with a two pin and earth and metal clad plug socket complete with one single pole MCB 20 Amp 240 Volts complete all as specified and directed. Make - Indoasain/Legrand/Havells

M&L in repairs for MCB SP, 240 volt, 5 to 32 Amps, 10 KA, C Curve, Make - Indo Asian/Legrand/ ABB/Schnider/Havells

M&L in repairs for MCB SPN, 240 volt, 40 to 63 Amps, 10 KA, C Curve, Make - Indo Asian/Legrand/ABB/Schnider/Havells

M&L in repairs for MCB TPN, 240 volt, 40 to 100 Amps, 10 KA, C Curve, Make - Indo Asian/Legrand/ABB/Schnider/Havells

Renewal/ Replacement for earthing complete with M.S. galvanized earth plate electrode 600 x 600 x 6 mm thick buried directly in ground (earth pit not less than 2.25 M deep below normal GL) with top edge of the earth plate not less than 1.5M below normal GL, connected to galvanized earth lead wire 4 mm dia by means of bolts, nuts, check nuts & washers of GI or steel incl excavation, PCC (1:3:6) type C-1 chamber with RCC cover (1:2:4) type B0, 40 mm thick reinforced with 6 mm dia bar, 3 Nos. both way, 15 mm dia light grade GI protection pipe, funnel with wire mesh,watering pipe of size 20 mm dia med. grade, lugs, main Earthing lead upto 7.5 mtr incl. Charcoal dust, salt etc. all as shown in electrical plate No. 3 of SSR Pt-I, 2009 specification.

Renewal/ Replacement for provn of Earthing complete with M.S. galvanized earth plate electrode 600 x 600 x 6 mm thick buried directly in ground (earth pit not less than 2.25 M deep below normal GL) with top edge of the plate not less than 1.50 M below normal GL, connected to Galvanized earth strip 32x6mm upto 7.5 mtr with protection pipe by means of bolts, nuts, check nuts & washers of GI or steel incl excavation, PCC (1:3:6) type C-1 chamber with RCC cover (1:2:4) type B0, 40 mm thick reinforced with 6 mm dia bar, 3 Nos. both way, 40mm dia light grade GI protection pipe, funnel with wire mesh,watering pipe of size 20 mm dia med. grade, lugs, main Earthing lead upto 7.5 mtr incl. Charcoal dust, salt etc. all as shown in electrical plate No. 3 of SSR Pt-I 2009 specification.

S&F in repairs GI strip size 25 x 4 mm all as directed including welding brazing and taking down of old copper strips as required at site

Taking down old unserviceable High bay, Mid Bay, Flame Proof light fittings from walls/Builings/Sheds/Ceiling height up to 10 Meter for repairs and replacement of burnt/worn out accessories and refixing the same in existing position including testing of fittings after repair, testing of connected wiring complete all as directed by Engineer in charge . Note :- (a) T & P, Ladder for any height etc are deemed to be included in the quoted rate. (iii) The representative of the contrcator shall report to Engineer-in-charge/JE and carry out repairs on daily basis during the contrcat period and the defect shall be rectified on the same day (iii) A penal recovery of Rs 500 Per Day Per Complaint for not attening the compalint will be recovered

Supply and Fix in repairs CIMFR certified LED flame proof tube light fitting 1 X 16/20 Watts, with driver & LED tube rod, IP 65 protection, including connecting up with three core flexible multi strand copper conductor of size 1.5 Sqmm with flexible metal conduit, including fabrication and fixing of red oxide coated brackets made out of MS angles/MS flat for fixing the fitting up to one meter below permenent ceiling, including anchor fastners, nut bolts, hooks, chain etc. Make : Crompton cat no -EXTN1LT8-16/20 /Bajaj/ Sudhir Note : (a) Fittings shall will be installed in Hangers/Sheds, hight up to 6 Meters only and directed by Engr-in-Charge. (b) T & P, Ladder for any height etc are deemed to be included in the quoted rate.

Supply and Fix in repairs CIMFR certified LED flame proof tube light fitting 2 X 16/20 Watts, with driver & LED tube rod, IP 65 protection, including connecting up with three core flexible multi strand copper conductor of 1.5 Sqmm, with flexible metal conduit, including including fabricating red oxide coated brackets made out of MS angles/MS flat for fixing the fitting up to one meter below permenent ceiling, including anchor fastners, nut, bolts, hooks, chain etc. The Fitting Shall Conform to cat no -EXTN2LT8-16/20 of Crompton or equivalent from bajaj, Philips, Sudhir/Baliga Note : (a) Fittings shall will be installed in Hangers/Sheds, hight up to 6 Meters only and directed by Engr-in-Charge. (b) T & P, Ladder for any height etc are deemed to be included in the quoted rate.

Supply and Fix in repairs CIMFR certified LED flame proof well glass light fitting 60 watts , with driver & LED, IP 65 protection, including connecting up with three core flexible multi strand copper conductor of 1.5 Sqmm, with flexible metal conduit, including including fabricating red oxide coated brackets made out of MS angles/MS flat for fixing the fitting up to one meter below permenent ceiling, including anchor fastners, nut, bolts, hooks, chain etc The Fitting Shall Conform to Cat no -FWL1315-60-CDL of Crompton or equivalent from bajaj, Philips, Sudhir/Baliga Note : (a) Fittings shall will be installed in Hangers/Sheds, hight up to 6 Meters only and directed by Engr-in-Charge. (b) T & P, Ladder for any height etc are deemed to be included in the quoted rate.

S&F in repairs flame proof WP rotory type, 10/16A, single pole 250V switch with cable termination box in LM6. Make : Shyam switch gear/Sudhir

S&Fix in replacement wall mounted outdoor type double door LT Panel made out of 3 mm thick CRCA Sheet, the panel shall be provided with flame proof MCB DB made out of Cast aluminium alloy LM6, inside and out side light gray epoxy powder coating shade, with 1 No cable entry for incoming cable and three Nos cable entry for out going circuits with and including cable gland and stopping plug, 1 No MCB SPN 32 Amp as incoming and 3 Nos MCB SP6 Amps for out going connections IP 65 protection as per IS 2147/1962. The panel shall be powder coated, front openable and locakable with key and shall be fabricated from CPRI approved sample manufacturer. Make- Sudhir /Flexpro /Baliga /crompton greeves Note - The contractor shall submit the Layout Drawing of Panel and got approved by GE before the panel fabrication

Supply & fix in repairs UPVC panel trunking of size 25 mm X 25mm including spacers, screws, saddles for fixing the trunking in wall/GI sheets of shed Make - Precision Cat No PPT 2525 or Equivalent from Presto Plast/Finolex

Supply & fix in repairs UPVC panel trunking of size 45 mm X 45mm including spacers, screws, saddles for fixing the trunking in wall/GI sheets of shed Make - Precision Cat No PPT 4545 or Equivalent from Presto Plast/Finolex

Supply & fix in repairs UPVC panel trunking of size 100 mm X 100mm including spacers, screws, saddles for fixing the trunking in wall/GI sheets of shed Make - Precision Cat No PPT 100100 or Equivalent from Presto Plast/Finolex

M & L For Taking down of LT XLPE insulated, armoured heavy duty 1100 volt grade electric cable with aluminium conductor of size 2 Core 10 Sqmm to 3.5 Core 35 Sqmm from wall/Roof/steel Structures of buildings/Storgae Sheds etc and refixing the same in position after replacing of Saddles & Spacers all as directed by Enginner incharge including replacing of cable glands, lugs & making all connections complete as required at site and as directed by Engr-in-Charge -

S&F aluminium earth strip as roof/down/earth contunity conductors of size 25x3mm with saddles, Parcelain, insulators, stainless steel screws, washer etc at any position / location of sheds/ buildings of height up to 30 meter complete all as specified and directed by the Engineer-in-charge Note -i) The quoted rate is deemed to inclusive of T & P/scaffolding/staging etc for executing the work in buildings of height up to 30 meter. ii) The rate is deemed to be inclusive of Procealin insulator, screws, Plugs etc.

S&F air termination, single pointed aluminium rod, 12mm dia 300mm long at any position / location including all necessary terminal base plate of thickness not less than 4 mm, scaffolding / staging required, etc. complete all as specified and directed by the Engineer-in-charge

M&L Test point terminal block made of gun metal or phosphorus bronze size 75x75x25 mm, drilled and screwed including 3 nos. 8mm dia 25 mm long hex. Head screw in replacement of the unserviceable. Including MS box made out of 3 mm thick shheet for fixing the block complete all as specified and directed.

M&L for pre-cast cement concreate block of size 0.15M x0.15M x0.15M for fixing of Aluminium strip type C1 1:3:6 using 20mm graded stone aggregate in cement motor 1:4, including fixing the coccrete block on terrace of bldgs of height up to 30 meter all as directed at site Note -i) The quoted rae is deemed to inclusive of T & P/scaffolding/staging etc for executing the work in buildings of height up to 30 meter.

Supply and fixing of GI pipe light grade of size 40 mm bore for laying in trenches/floors or walls including all fittings for fixing complete as required and directed by Engineer-in-Charge.

M&L for painting on wall with synthetic enameled paint of black colour of 200 x 150 mm size and writing work for earth test result with date & year all as specified and directed at site by Engineer-in-Charge. Note 2 : A sum of Rs 58,395.00 towards sch of credit shall be deducted to arrive the contract sum.

R J ENTERPRISES

Shree Ayyappa Engineering

Parmatma Enterprises

AM ENTERPRISES

M/s ASPIRE ENGINEERING ENTERPRISES

PRIME ENGINEERS

Chaudhary Enterprises

A P ENTERPRISES