Construction of Residential Building for frontline staff (Group housing model) 2 No.in Kerur FS No. 324 Badami Range Badami

Construction of Staff Quarters in Badami Range Badami

Earth work excavation by manual means for drains, canals, waste weir, draft, approach channels, key trenches, foundation of Buildings & bridges and such simillar works in all kinds of soils, as per dr...

PCC M-7.5 Providing and laying in position Cement Concrete for levelling course for all works in foundation. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevan...

Providing Coursed rubble masonry (first sort) with hard stone in foundation and plinth with Cement mortar 1:6 (1 cement : 6 coarse sand) [PWD CSR 2023-24, Vol-2, Pg.No.-9, It.No.-5.2]

RCC M-20 Providing and laying in position Cement Concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The gr...

FORMWORK RCC M-20 RCC Beams ,Lintels & Troughs of Aqueducts [PWD-CSR-2023-24, VOL-1, Page No:112 , Sl.No: 14 ]

Construction of Embankment by excavating the available approved Gravel/Murrum deposited at a place or borrow pits during or prior excavation with all lifts and lead, transportation to site, spreading,...

Providing Brick work with common burnt clay machine moulded perforated bricks of class designation 5.0 conforming to IS: 2222 in superstructure above plinth level in cement mortar 1:6 (1 cement : 6 co...

RCC M-20 Providing and laying in position Cement Concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The gr...

FORMWORK RCC M-20 RCC Beams [PWD-CSR-2023-24, VOL-1, Page No:112 , Sl.No: 14 ]

FORMWORK RCC M-20 RCC Roof Slabs [PWD-CSR-2023-24, VOL-1, Page No:111 , Sl.No: 9 ]

TMT STEEL Supplying, fitting and placing TMT FE 550 / 550D Steel Reinforcement including cost of all materials, machinery, labour, cleaning, straightening cutting, bending, hooking, laping/welding joi...

PCC M-15 Providing and laying in position Cement Concrete for levelling course for all works in foundation. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant...

Providing and fixing aluminium work for doors, windows, ventilators and partitions with extruded built up standard tubular sections/ appropriate sections and other sections of approved make conforming...

Providing and fixing glazing in aluminium door, window, ventilator shutters and partitions etc. with EPDM rubber / neoprene gasket etc. complete as per the architectural drawings and the directions of...

Providing and fixing M.S. grills of required pattern in frames of windows etc. with M.S. flats, square or round bars etc. including priming coat with approved steel primer all complete. Fixed to openi...

Providing lath plaster with cement mortar 1:3, 5cms thick with 6mm dia mild steel bars at 20 cms. c to c both horizontally and vertically fixed with chicken mesh for drop chajja,facia, backing to cup ...

Providing 18 mm cement plaster in two coats under layer 12 mm thick cement plaster with cement mortar 1:5 (1 cement : 5 coarse sand) and a top layer 6 mm thick cement plaster with cement mortar 1:3 (1...

Providing 12 mm cement plaster with Cement mortar 1:3 (1 cement: 3 coarse sand) finished with a floating coat of neat cement to brick masonry including rounding off corners wherever required smooth re...

Providing and applying white cement based putty of average thickness 1 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete as per sp...

Providing Flush/ Ruled pointing: Pointing on stone work with cement mortar 1:3 (1 cement : 3 fine sand) after raking joints to depth nicely lining,including cost of materials, labour, curing as per sp...

Providing flooring with 25mm thick polished Cuddapah slabs using cement mortar 1:6, 25mm thick over existing cement concrete bed or top of roof laid to line and level and jointed with cement slurry mi...

Providing and laying Vitrified tiles with thickness 9-10 mm in different sizes with water absorption less than 0.08 % and conforming to I.S. 15622, of approved make, in all colours & shade, over 12 mm...

Providing skirting, dadooing, rises of steps with colour glazed tiles 6mm thick on 10mm thick cement plaster 1:3 and jointed with white cement slurry over existing rough plaster surface using glazed t...

Providing Mathi/Nandi wood frames of doors, windows, clerestory windows, ventilators and other frames, wrought, framed or assembled including making plaster groves (excluding cost of cement concrete a...

Providing and fixing flush door shutter made out of solid core block board type, well seasoned , chemicaly treated hard wood battens and internal frame with minimum 45 mm wide wooden frame alround doo...

Fixing of door frame in an existing opening including embedding frame in floor and walls after cutting masonry for holdfasts for embedding holdfast in cement concrete 1:3:6 of 20mm and down size grani...

Providing & fixing factory made PVC Door frame of size 50x47mm with a wall thickness of 5mm, made out of extruded 5mm rigid PVC foam sheet metered cut at corners & jointed 2 No.s of 150mm long bracket...

Providing & fixing 30mm thick factory made rigid foam Prelam Panelled Door Shutters made from M.S. tube of 19x19mm, 19 gauge for stiles and 15x15mm for top & bottom rails, covered with heat moulded Pr...

Providing and fixing bright finished brass hanging type floor door stopper with necessary screws, etc. complete.[CSR 2023-24,Vol -2, Pg.No 105 It.No-12.58]

Providing and fixing aluminium tower bolts, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868 ) transparent or dyed to required colour or shade, with necessary screws etc...

Providing and fixing ISI marked M.S. pressed butt hinges bright finished with necessary screws etc.125x65x2.12mm. [CSR 2023-24,Vol -2, Pg.No 105 It.No-12.68.1]

Providing and fixing ISI marked oxidised M.S. handles conforming to IS:4992 with necessary screws etc. complete 125mm :[CSR 2023-24,Vol -2, Pg.No 107 It.No-12.73.1]

Providing & supplying Napkin holder of radius made of Stainless steel 304 grade as per direction of Engineer in charge of work[PWD CSR 2023-24, Vol-2, Pg.No.-22, It.No.-22.43]

Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, including fixing the pipe wi...

Supply and delivery at site special moulded variety PVC tee as per IS 7834/ 1987 and fabricated as per IG124/ 1984 with ISI mark with its latest amendments 32 mm dia PVC Tee[PWD-CSR-2023-24, VOL-2, Pa...

Providing and fixing gun metal non- return valve of approved quality (screwed end) : 32 mm nominal bore Horizontal [PWD-CSR-2023-24, VOL-2, Page No:118 , It.No: 13.6.2.1 ]

Providing and fixing unplasticised PVC connection pipe with brass unions :45 cm length 20 mm nominal bore [PWD-CSR-2023-24, VOL-2, Page No:118 , It.No: 13.8.2.2 ]

Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVCplain & brass threaded fittings, including fixing the pipe wit...

Providing and fixing brass stop cock of approved quality :20 mm nominal bore [CSR 2023-24,Vol -2, Pg.No-117, It.No-13.3.2]

Providing and fixing brass bib cock of approved quality :20 mm nominal bore [CSR 2023-24,Vol -2, Pg.No-117, It.No-13.2.2]

Providing and fixing C.P. brass shower rose with 15 or 20 mm inlet 150 mm diameter [CSR 2023-24,Vol -2, Pg.No-118, It.No-13.9.2]

Providing and fixing PTMT Sink cock of approved quality and colour 15 mm nominal bore, weighing not less than 130 g.[CSR 2023-24,Vol -2, Pg.No-120, It.No-13.20a]

Providing and fixing PTMT swivelling shower, 15 mm nominal bore, weighing not less than 40 gms[CSR 2023-24,Vol -2, Pg.No-121, It.No-13.25]

Providing and fixing PTMT grating of approved quality and colour Circular type 125 mm nominal dia[CSR 2023-24,Vol -2, Pg.No-120, It.No-13.22.1.2]

Providing and fixing C.P. brass angle valve for basin mixer and geyser points of approved quality conforming to IS:8931[CSR 2023-24,Vol -2, Pg.No-119, It.No-13.16]

Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply including all CPVC plain & brass threaded fittings This includes jointing of pipe...

Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply including all CPVC plain & brass threaded fittings This includes jointing of pipe...

Constructing brick masonry chamber of internal dimension 230x150mm and depth of 600mm (inner dimensions) with modular bricks of CD 75in cement mortar 1:6, bed concrete 150mm thick with 1:3:6, plasteri...

Finishing with Deluxe Multi surface paint system for interiors and exteriors using Primer as per manufacturers specifications: Two coats applied on walls @ 1.25 L/10 m² over and including one coat of...

Finishing walls with textured exterior paint of required shade :Old work (Two coats on existing cement paint surface applied @ 3.28 l/10 m² including preparing the surface after thoroughly cleaning t...

Painting Steel work with Deluxe Multi Surface Paint to give an even shade. Two coat applied @ 0.90L/10 m² over an under coat of primer applied @ 0.80 L/10 m² of approved brand and manufacture includ...

Technically Scrutiny Charges

Estimate Preparation & Consulting Charges

Miscellaneous & rounding off