REPAIR TO MISC FURNITURE INCLUDING PAINTING/ POLISHING UNDER GE (AF) BAMRAULI

Amount

Repair of under mentioned furniture items will be carried out as follows (Sl No 1.01 to 18.14 ):- (a) Removal of existing unserviceable material carefully without disturbing the adjoining parts from furniture articles as mentioned in the schedule.Supply and fixing new parts as per given specification and drg after tightening the joints, pinning, screwing, nailing, wedging, glueing,providing hinges, placing every part in-tact including polishing/painting the entire article with standard workmanship and as directed by GE/Engr-in-Charge.All furniture items is to be painted /poilshed only after making the entire item intact by tightening the joints. (Sl No 1.01 to 18.14 ) (b) Work will be executed where the furniture exist in different User Units/Md accns of GE (Air Force ) Bamrauli including BSO's Furniture Yard as directed by Engineer-in-Charge (Sl No 1.01 to 18.14):- (c) All Timber shall be of 1st class seasoned hard teak wood (Shegun/ Assam Teak ) free from knots and cracks else specified in drg. (Sl No 1.01 to 18.14). (d) Anti-termite and anti-bug treatment shall be done before polishing the wooden items. (Sl No 1.01 to 18.14) (e) For wooden items:M&L for melamine polish high gloss/mate finish with spray machine applying shellac,wood filler,shelar etc after removing of complete existing polish making surfae smooth by sand paper (Emery paper) with standard workmanship as directed by EIC to the following furniture articles of MES pattern viz F/DB/FD/MAP series/TP or Similar items incl applying wax for depressed surface as well as washing with caustic soda wherever required before polishing all as specified and all as directed by Engineer-in-Charge. Shade of polishing/pinting will be directed by GE/Engr-in-Charge. There should be atleast one day gap in each step during polishing/painting .(Sl No 1.01 to 18.14) where ever applicable ) (f): For steel items:- M&L for painting two coat of hammer Tone paint with shade as approved by EIC/GE over a coat of primer through spray machine , both internally & externally to the furniture articles, viz F/FD/DB/MAP/TP series or similar items including removing of dust, dirts,dents etc and existing paint both internally & externally by applying paint remover/scrapping without damaging to surface , applying putty to level the surface before primer/painting, all as specified and shown on drgs and directed by Engineer-in-Charge.here should be atleast one day gap between every step of painting. Note: All material will be used to execute the work should be supplied by contractor in full no peacemeal material will be execpted.(Sl No 1.01 to 18.14 where ever applicable )

Charpoy GI pipe ply top

12 mm thick plywood top BWP Grade (Make: Gold from Greenply/Gold from Archidply/ Club Prime from Century Ply) as per existing shape and size with shunken nut/bolts ,appropriate hole shall be made with elecrtic drill machine complete AND 12mm x 6mm thick teak wood beading half round along with the edges duly smoothened of the plywood and rounded at corner fixed with fevicol and headless nails all as directed by Engr-in-Chg. .

MS Flat iron of size 40x5mm duly pinted with two coat of black colour synthetic enamel paint over a coat of red oxide primer to be fixed over the long rails equal to existing width of Charpoy including drilling holes suitably as directed by Engr-in-Charge.

Long rail of 32 mm dia Medium grade GI pipe including cutting and threading complete all As Specified and directed. (Make of Pipe: Tata/Jindal/JSL)

Replacement of unserviceable short rail from charpoy GI pipe 32mm bore but "except pipe" including cutting threading etc as required and directed. Note : Pipe shall be used from unserviceable long rail obtained from item No 1.04 here in before.

Replacement of unservicable legs from charpoy GI pipe 32mm dia but except pipe including cutting threading etc as required and MS plate of 3mm thick and 36mm dia welded to leg flat iron and clamp 02 Nos for MNF set duly painted with two coats of black paint complete all as specified and directed by Engr-in Chg. Note : Pipe obtained from ser item No 1.04 & 1.05 above shall be used for this items.

GI Elbow 3 way 32 mm dia medium grade ISI Marked complete all as specified and directed by Engr-in Chg.

Check nuts 32 mm dia complete all as specified and directed by Engr-in Chg.

MS plate of 3mm thick and 36mm dia welded to leg of GI Charpoy pipe complete all as specified and directed by Engr-in Chg.

BED PLY WOOD TOP ( FD-246)

Replacement of unserviceable Top with Ply top 12 mm thick BWP Grade (Make: Green Gold from Greenply/Gold from Archidply/ Bond 710 from Century ply) all as per drg.

Replacement of Teak face ply 4 mm thick (Make: Green Gold from Greenply/Gold from Archidply/ Bond 710 from Century ply) in head rest as per drg.

Replacement of Teak face ply 4 mm thick (Make: Green Gold from Greenply/Gold from Archidply/ Bond 710 from Century ply) in foot rest as per drg.

Wooden corners to be provided in shape all as directed by EIC/GE.

Bed Hard Steel (FD/E6/MAP/08(R))

Material and labour for for in replacement of top of bed ply wood with 12 mm thick commercial plywood, BWP grade, ISI marked of (Make: Green Gold from Greenply/Gold from Archidply/ Bond 710 from Century ply) ply fixed on the top of bed plywood with screws fixed with existing mild steel GI bolts of 6mm dia of suitable lengths including washers and nuts complete, all as specified and shown in drawing and as directed .

Material and labour in reapir of head board of size 635 mm X 200 mm made from 18mm thick pre-laminated particle board exterior grade both side decorative finish shade as approved by GE complete including removal of damaged head board all as specified on drawing and directed.

Material and labour in reapir of foot board of size 635 mm X 200 mm made from 18mm thick pre-laminated particle board exterior grade both side decorative finish shade as approved by GE complete including removal of damaged head board all as specified on drawing and directed.

Material and labour for for in replacement of Rubber shoe and new rubber shoe of size 25mm square to be fixed as per sample

Material and labour for preparation of old / new steel surfaces of any description by scrapping, rubbed down by emery paper and applying powder coating as per specification in drg complete all as specified and directed.

Charpoy IP Hard top (FD/MAP-II/01)

M&L for in replacement of plywood from Charpoy IP Hard top with new 12mm thick plywood top of size 1980mmx900mm BWP grade type ISI markded (Make:Kit ply/century ply/Archid ply) fixed with existing mild steel GI bolts of 6mm dia of suitable lengths including washers and nuts all as specified in drg and directed.

Material and labour for welding of broken joints of Charpoy or joining of points through welding including preparation of surface complete, rest all as shown on drg and directed.

Material and labour for preparation of old / new steel surfaces of any description by scrapping, rubbed down by emery paper and applying powder coating as per specification in drg complete all as specified and directed.

M& L for in replacement of Rubber shoe with new rubber shoe of size 25mm square to be fixed as per sampled .FD/MAP-II/01.of approved quality complete all as specified and directed.

Table Bed Side {FD/E6/MAP/15}

Taking out old unservicable ply from the back of table bed side and S&F new back with as per drg . Shade and texture natural teak as per existing table bed side and 6 mm thick PVC edging all around the table top, complete, all as specified and shown in drawing and as directed .

Taking out old unservicable pre-laminated board from the side of table bed side and S&F new back with 18/19 mm thick pre-laminated particle board (exterior grade), ISI marked, commercial type ( Shade and texture natural teak as per existing table bed side) and 6 mm thick PVC edging all around the table top, complete, all as specified and shown in drawing and as directed .

Taking out old unserviceable top of table bed side and S&F new top with 18/19 mm thick pre-laminated particle board (exterior grade), ISI marked, commercial type Shade and texture natural teak as per existing table bed side) and 6 mm thick PVC edging all around the table top, complete, all as specified and shown in drawing and as directed .

Taking out old unserviceable powder coated telescopic channels of 1.6mm thick and S & F new powder coated telescopic channels of 1.6mm (Make: Hettich/Ebco/Quba/ Klazovyn) thick fitted in drawers complete all as specified and shown in drawing and directed.

Taking out old unserviceable drawers of table bed side and S&F new drawers shall be with 18/19 mm thick pre-laminated particle board (exterior grade), ISI marked, commercial type ( Shade and texture natural teak as per existing table bed side) and 4 mm thick half round first class teak wood edging all around the table top, complete, all as specified and shown in drawing and as directed .

Taking out old broken/ unserviceable handle from table bed side and S&F newe CP Handle 4" (Make: Hettich/Ebco/Quba/Klazovyn) as approved by GE in table bed side complete all as specified and shown in drawing and as directed

Taking out old PVC edging to table bed side and S&F new PVC edging of 1.5mm thick fix in table bed side complete all as specified and shown in drawing and as directed

M & L for welding of broken joints of Table bed side (MAP) including preparation of surface and powder coating paint all as specified and shown in drawing and directed.

CHAIR DINING various types

Rear legs as per drg

Front Leg as per drg

Seating Frame members front, back sides as per drg

Bottom/Centre stiffener as per drg

Back strip as per drg

S&F of PVC Seat as per Drg. MAKE OF PVC SEAT –AMKO/COMFO /HARMONY

Material and labour in replacement for seat of chair dining with cushion, Seat shall be 12 mm thick BWR grade phenol bonded plywood, commercial vennered both sides, fixed to rails with 12 Nos. steel screws of suitable size. The seat ply shall be covered with removeabl 75 mm thick 32 density foam cushion with approved upholstery fabric of best quality as approved by the GE of rate Rs.300/- per meter. All as per drawing and as specified and directed by the Engineer-in-Charge

Repair of under mentioned furniture items will be carried out as follows (Sl No 7.01 to 7.10):- (a) Removal of existing unserviceable material carefully without disturbing the adjoining parts from furniture articles as mentioned in the schedule.Supply and fixing new parts as per given specification and drg after tightening the joints, pinning, screwing, nailing, wedging, glueing,providing hinges, placing every part in-tact including polishing/painting the entire article with standard workmanship and as directed by GE/Engr-in-Charge.All furniture items is to be painted /poilshed only after making the entire item intact by tightening the joints. (b) Work will be executed where the furniture exist in different User Units/Md accns of GE (Air Force ) Bamrauli including BSO's Furniture Yard as directed by Engineer-in-Charge (From sl No 7.01 to 7.10) (c) All Timber shall be of 1st class seasoned hard teak wood free from knots and cracks else specified in drg. (d) Anti-termite and anti-bug treatment shall be done before polishing the wooden items. (e) M&L for melamine polish high gloss/mate finish with spray machine applying shellac,wood filler,shelar etc after removing of existing polish making surfae smooth by sanding and grinding with standard workmanship as directed by EIC to the following furniture articles of MES pattern viz F/DB/FD/MAP series/TP or Similar items incl applying wax for depressed surface as well as washing with caustic soda wherever required before polishing all as specified and all as directed by Engineer-in-Charge. Shade of polishing/pinting will be directed by GE/Engr-in-Charge.

Table 3'X2' with / without Drawer (FD-55/284/283 or simillar ) :-Top 18 mm thick MDF board exterior grade (Grade I, Type-II) ISI marked (Action Tesa/Century Ply/Archid ply) duly post -formed with 0.6 mm thick laminate in colour/shade as approved by EIC/GE with 1.6 mm thick PVC edging of Make-Rehau/Pegasus/Kynex shall be fixed on two sides with strong bonded chemical adhesive through hot pressed machine complete rest all as per drg.

Table Dining 4 Persons : (FD-273, 30 or similar type/MAP Drg) :- Top for table dining table 4 pers made of 18 mm thick BWP grade plywood (Make :- Kitply (Gold)/Century(Bond)/Archid ply (Gold) duly post -formed with 0.8 mm thick sunmica of make : (Make :- Kitply/Century/Archid ply) pasted on exposed view and other side with balancing white sunmica with suitable adhesive all as directed by GE/EIC. 1.6 mm thick PVC edging of Make-Rehau/Pegasus/Kynex shall be fixed with suitable adhesive and edge banding machine all as directed by GE/EIC.

Table Dining 6 Persons : (FD-273, 30 or similar type/MAP Drg) :- Top for table dining table 6 pers made of 18 mm thick BWP grade plywood (Make :- Kitply (Gold)/Century(Bond)/Archid ply (Gold) duly post -formed with 0.8 mm thick sunmica of make : (Make :- Kitply/Century/Archid ply) pasted on exposed view and other side with balancing white sunmica with suitable adhesive all as directed by GE/EIC. 1.6 mm thick PVC edging of Make-Rehau/Pegasus/Kynex shall be fixed with suitable adhesive and edge banding machine all as directed by GE/EIC.

Table Dining 8 Persons : (FD-273, 30 or similar type/MAP Drg) : Top for table dining table 8 pers made of 18 mm thick BWP grade plywood (Make :- Kitply (Gold)/Century(Bond)/Archid ply (Gold) duly post -formed with 0.8 mm thick sunmica of make : (Make :- Kitply/Century/Archid ply) pasted on exposed view and other side with balancing white sunmica with suitable adhesive all as directed by GE/EIC. 1.6 mm thick PVC edging of Make-Rehau/Pegasus/Kynex shall be fixed with suitable adhesive and edge banding machine all as directed by GE/EIC.

Table 3'X3' (FD- 88& 291or simillar):- Top for table 3'X3' made of 18 mm thick MDF board exterior grade (Grade I, Type-II) ISI marked (Action Tesa/Century Ply/Archid ply duly post -formed with 0.6 mm thick laminate in colour/shade as approved by EIC/GE with 1.6 mm thick PVC edging of Make-Rehau/Pegasus/Kynex shall be fixed on two sides with strong bonded chemical adhesive through hot pressed machine complete rest all as per drg.

Table writing (FD-33,275, DB-3982 or similar type) :- Top for table writing made of 18 mm thick MDF board exterior grade (Grade I, Type-II) ISI marked (Action Tesa/Century Ply/Archid ply duly pasted with 0.6 mm thick laminate in colour/shade as approved by EIC/GE with 1.6 mm thick PVC edging of Make-Rehau/Pegasus/Kynex shall be fixed on two sides with strong bonded chemical adhesive through hot pressed machine complete rest all as per drg.

Table peg (FD-277/ 384, DB-3973):-Top for table peg made of 18 mm thick MDF board exterior grade (Grade I, Type-II) ISI marked (Action Tesa/Century Ply/Archid ply duly post -formedwith 0.6 mm thick laminate in colour/shade as approved by EIC/GE with 1.6 mm thick PVC edging of Make-Rehau/Pegasus/Kynex shall be fixed on two sides with strong bonded chemical adhesive through hot pressed machine complete rest all as per drg.

Table centre (FD-274 / 235):-Top for table centre made of 18 mm thick MDF board exterior grade (Grade I, Type-II) ISI marked (Action Tesa/Century Ply/Archid ply duly post -formedwith 0.6 mm thick laminate in colour/shade as approved by EIC/GE with 1.6 mm thick PVC edging of Make-Rehau/Pegasus/Kynex shall be fixed on two sides with strong bonded chemical adhesive through hot pressed machine complete rest all as per drg.

Teapoy (FD-278, 34, 382):-Top for table centre made of 18 mm thick MDF board exterior grade (Grade I, Type-II) ISI marked (Action Tesa/Century Ply/Archid ply duly post -formed with 0.6 mm thick laminate in colour/shade as approved by EIC/GE with 1.6 mm thick PVC edging of Make-Rehau/Pegasus/Kynex shall be fixed on two sides with strong bonded chemical adhesive through hot pressed machine complete rest all as per drg.

Teapoy Verandah : Repalcement of UNSV top with new Top 18 mm thick MDF board exterior grade (Grade I, Type-II) ISI marked (Action Tesa/Century Ply/Archid ply) duly post -formed with 0.6 mm thick laminate in colour/shade as approved by EIC/GE with 1.6 mm thick PVC edging of Make-Rehau/Pegasus/Kynex shall be fixed on two sides with strong bonded chemical adhesive through hot pressed machine complete rest all as per drg.

a) Anti-termite and anti-bug treatment shall be done before polishing the wooden items. b) M&L for melamine polish high gloss/mate finish with spray machine applying shellac,wood filler,shelar etc after removing of existing polish making surfae smooth by sanding and grinding with standard workmanship as directed by EIC to the following furniture articles of MES pattern viz F/DB/FD/MAP series/TP or Similar items incl applying wax for depressed surface as well as washing with caustic soda wherever required before polishing all as specified and all as directed by Engineer-in-Charge. Shade of polishing/pinting will be directed by GE/Engr-in-Charge. There should be atleast one day gap in each step during polishing. c) Work will be executed where the furniture exist in different User Units at OTM/Md Accn under the jurisdiction of GE (AF) Bamrauli including BSO's Furniture Yard as directed by Engineer-in-Charge.

Table 3'X2' with / without Drawer (FD-55/284/283 or simillar)

Table 3'X3' (FD- 88& 291or simillar)

Table Dining 4 Persons (FD-273, 30 or similar type/MAP Drg)

Table Dining 6 Persons (FD-273, 30 or similar type/MAP Drg)

Table Dining 8 Persons (FD-273, 30 or similar type/MAP Drg)

Table writing (FD-33,275, DB-3982 or similar type)

Table Centre (FD-274 / 235)

Teapoy (FD-278, 34, 382)

Peg Table (FD-277/ 384, DB-3973)

Chair Easy

Chair Writing

CHAIR DINING various types

Sofa Set 5 Seater

Sofa Set 4 Seater

Table Dressing Ladies

Table Dressing Ladies (MAP)

Bed Hard

Chair writing map with cushion (FD/E6/MAP/12) (powder coating painting as per drg specification duly removing the existing paint or directed by Engr-in-Charge)

Material and labour for in replacement of cushion for sofa set 5 seater FD-281 or similar in map drg of size 560 mm X 530 mm X 100 mm thick, 40 density (Model name :Primo of make Sleep well /Model name Goldline Plus of make :Kurlon)s specified and shown in drawing and directed.

Material and labour for in replacement of tapesty cloth of best quality (cost not less than Rs.500/- per metre ) and stitching in required shade and colour including one side shall be left open by giving proper margin of cloth towards inside upto 2 inch for the purpose of washing to cover for cushion for sofa set of size 560 mm X 530 mm X 100 mm including complete as per sample all as specified and shown in drawing and directed.

Material and labour for in replacement of cushion for stool of dressing table ladies map as per drg incuding plywood (Model name :Primo of make Sleep well /Model name Goldline Plus of make :Kurlon), including tapesty cloth of best quality (cost not less than Rs.500/- per metre ) and stitching in required shade and colour including one side shall be left open by giving proper margin of cloth towards inside upto 2 inch for the purpose of washing to cover complete as per sample all as specified and shown in drawing and directed.

REPAIRS TO ALMIRAH LARGE STEEL (FD- 1031)/ Almirah med steel :-

Material and labour in replacement for 6 lever lock of almirah large steel of Make : Harison, Godrej of suitable size with duplicate keys as per sample, fixed with screws complete all as specified and shown in drawing and directed by the Engineer-in-Charge.

Material and labour for repair to door shutter with denting and necessary adjustment incl whole body denting and tighting as required complete all as specified and directed by the Engineer-in-Charge.

Material and labour in replacement for handle of almirah steel chromium plated fixed with screws, complete all as specified and shown in drawing and directed by the Engineer-in-Charge.

Material and labour in replacement for locking device three way as per drg complete all as specified and shown in drawing and directed by the Engineer-in-Charge.

a) M&L for painting two coat of hammer Tone paint with shade as approved by EIC/GE over a coat of primer through spray machine , both internally & externally to the following furniture articles, viz F/FD/DB/MAP/TP series or similar items including removing of dust, dirts,dents etc and existing paint both internally & externally by applying paint remover/scrapping without damaging to surface , applying putty to level the surface before primer/painting, all as specified and shown on drgs and directed by Engineer-in-Charge.here should be atleast one day gap between every step of painting.

Almirah Steel Medium/Small

Almirah Steel Large

Locker Steel

Teapoy Varandah

Table 3x2 with and w/o drawer

Rack Shoe steel

Table Bed Side (MAP)

Rack 6 tier steel

Rack 3 tier steel

Chair CB Steel with Arm/ Without Arms

Repair of sofa sets 05 seater (TP)

Material and labour for in replacement of unserviceable cloth Rexin upholstering from seat and back of sofa set of five seater (Special) with new material such Cloth Rexin of approved quality including 40 density cushion 100mm/110mm high (Model name :Primo of make Sleep well /Model name Goldline Plus of make :Kurlon) as required size and shape and replacement of all spring dumb bell shape 10 gauge with 100mm dia and 100mm/150mm high with new steel spring copper coated, complete duly French polished on wooden surface from all sides complete directed. Note : Cost of cloth / Rexin shall not be less than Rs.800/-RM) and shade shall be as approved by GE Trade pattern/ Godrej/ Methodex/ Durrian complete all as specified and shown in drawing and directed.

Repair of sofa sets 04 seater (TP)

Material and labour for in replacement of unserviceable cloth Rexin from seat and back of sofa set of four seater (Special) with new material such Cloth Rexin of approved quality including 40 density cushion 100mm/110mm high (Model name :Primo of make Sleep well /Model name Goldline Plus of make :Kurlon) as required size and shape and replacement of all spring dumb bell shape 10 gauge with 100mm dia and 100mm/150mm high with new steel spring copper coated, complete duly French polished on wooden surface from all sides complete directed. Note : Cost of cloth / Rexin shall not be less than Rs.800/-RM) and shade shall be as approved by GE Trade pattern/ Godrej/ Methodex/ Durrian complete all as specified and shown in drawing and directed.

Repair of sofa sets 03 seater (TP)

Material and labour for in replacement of unserviceable cloth Rexin from seat and back of sofa set of Three seater (Special) with new material such Cloth Rexin of approved quality including 40 density cushion 100mm/110mm high (Model name :Primo of make Sleep well /Model name Goldline Plus of make :Kurlon) as required size and shape and replacement of all spring dumb bell shape 10 gauge with 100mm dia and 100mm/150mm high with new steel spring copper coated, complete duly French polished on wooden surface from all sides complete directed. Note : Cost of cloth / Rexin shall not be less than Rs.800/-RM) and shade shall be as approved by GE Trade pattern/ Godrej/ Methodex/ Durrian complete all as specified and shown in drawing and directed.

Repair of sofa sets 02 seater (TP)

Material and labour for in replacement of unserviceable cloth Rexin from seat and back of sofa set of Two seater (Special) with new material such Cloth Rexin of approved quality including 40 density cushion 100mm/110mm high (Model name :Primo of make Sleep well /Model name Goldline of make :Kurlon) as required size and shape and replacement of all spring dumb bell shape 10 gauge with 100mm dia and 100mm/150mm high with new steel spring copper coated, complete duly French polished on wooden surface from all sides complete directed. Note : Cost of cloth / Rexin shall not be less than Rs.800/-RM) and shade shall be as approved by GE Trade pattern/ Godrej/ Methodex/ Durrian complete all as specified and shown in drawing and directed.

Repair of sofa sets Single seater (TP)

Material and labour for in replacement of unserviceable cloth Rexin from seat and back of sofa set of Single seater (Special) with new material such Cloth Rexin of approved quality including 40 density cushion 100mm/110mm high (Model name :Primo of make Sleep well /Model name Goldline Plus of make :Kurlon) as required size and shape and replacement of all spring dumb bell shape 10 gauge with 100mm dia and 100mm/150mm high with new steel spring copper coated, complete duly French polished on wooden surface from all sides complete directed. Note : Cost of cloth / Rexin shall not be less than Rs.800/-RM) and shade shall be as approved by GE Trade pattern/ Godrej/ Methodex/ Durrian complete all as specified and shown in drawing and directed.

Poishing of various type of TP furniture with Duco Paint by scrubing of the full existing polish of the furniture with water paper/ sand paper with disturbing the surface of the the furniture and applying two coat of duco paint with proper spray painting machine and gun to give it aesthatic or uniform look as required complete all as specified and directed by the Engineer-in-Charge.There should be atleast one day gap in each step during polishing.

Table Executive

Chair visitor wooden

Side unit

Pedastal with drawer

Table Peg with Glass top

Center table with Glass top

Corner Table with Glass top

Painting of any furniture article or any part with duco paint by scrubing of the full existing polish of the furniture with water paper/ sand paper with disturbing the surface of the the furniture and applying two coat of duco paint with proper spray painting machine and gun to give it aesthatic or uniform look as required complete all as specified and directed by the Engineer-in-Charge.There should be atleast one day gap in each step during polishing.

Supply and fixing including preparation of various parts of bed hard (incl head board and foot board as per drg) , various type of table and chairs all other parts of various FD furniture articles in furniture yard as reqiured from Ist class teak wood (Shegun/ Assam teak) free from knots and well seasoned within permissible limit and as directed by Engr-In-Charge. All furniture in which parts are assembled will be polished as per Sl No 1 (e) above

Recanning of various types of chairs / stool with plastic cane half round 2mm wide 0.35 mm thick (4mm wide semi round for border) best quality as per Godrej pattern including removing of old cane complete all as specified and directed. Make of cane : Premier.

Recanning of wooden Writing chair

Recanning of wooden Dining chair

Recanning of wooden Chair Easy

Material and labour for re-caning of chair verandah with plastic cane half round 4mm wide 0.4mm thick, best quality, as per Godrej pattern including removing of old cane complete all as specified and directed. Make of cane : Premier.

Material and labour in replacement for worn out material ie PVC Seat & Back from chair verandah,and fixing suitable PVC seat & Back for FD-256/359 of make M/S polymer or equivalent of weight not less than 1.83 kg per pair (seat & back) complete all as specified and directed. Make of cane : Premier.

Material and labour for welding of any furniture article complete all as specified and directed.

Material and labour for dry cleaning for cloathing, textiles and upholestry using a chemical solvent other than water after preparation of surface including repair and stiching to the following furniture items all over complete and as directed by Engr-in-charge.

Sofa 5 seater with cushion TP

Sofa 4 seater with cushion TP

Sofa 3 seater with cushion TP

Sofa 2 seater with cushion TP

Sofa single seater with cushion TP

Chair dining with cushioned

Chair easy with cushioned

Chair writing with cushioned

Chair revolving High back

Chair revolving Med Back

Chair revolving low back

Chair computer

Chair visitor

Dry cleaning of any surface

Note :- Credit shown in credit schedule of tender document shall be considered by the tenderer while quoting the rates of various items. The same shall be recovered from various payment to contractor before handing over old material

M/S vibhuti enterprises (BID ID -3265658)

Mohit Enterprises (BID ID -3264178)

M/S SWASTIK BUILDERS (BID ID -3265635)

R K GUPTA AND SONS (BID ID -3264165)

Supreme Builders (BID ID -3265001)

Bharat Trading Company (BID ID -3264097)

UNIQUE FURNITURES SALES (BID ID -3265183)

GAJANAN SALES CORPORATION (BID ID -3263851)

M/S SUNIL TRADERS (BID ID -3265537)