TIRUPPUR DISTRICT PMGSY III 2021 22 PKG NO 189 KUNDADAM BLOCK

Amount

1.Upgradation to the road from Manurpalayam to West Sadayapalayam Km 0/0- 7/175

Clearing and grubbing road land including uprooting wild vegetation, grass, bushes, shrubs, saplings and trees of girth upto 300 mm, removal of stumps of such trees cut earlier and disposal of unserviceable materials and stacking of serviceable material to be used or auctioned, upto a lead of 1000 m including removal and disposal of top organic soil not exceeding 150 mm in thickness as per Technical Specification Clause 201.

Scarfing the existing bituminous road surface to a depth of 150 mm and disposalof scanfied material with a lift upto 3 m and lead upto 1000 m as per Technical Specification Clause 301.4

Construction of embankment with approved material obtained from borrow pits with a lift upto 1.5 m, transporting to site, spreading, grading to required slope and compacting to meet requirement of Tables 300.1 and 300.2 with a lead upto 1000 m as per Technical Specification Clause 301.5

Construction of embankment with approved materials deposited at site from roadway cutting and excavation from drain and foundation of other structures graded and compacted to meet requirement of Tables 300.1 and 300.2 as per Technical Specification Clause 301.5 (Gravel shoulder)

'Providing, laying, spreading and compacting graded stone aggregate to wet mix macadam specification including premixing the material with water at OMC in mechanical mixer (Pug Mill), carriage of mixed material by tipper to site, laying in uniform layers in sub-base/base course on a well prepared sub-base and compacting with smooth wheel roller of 80 to 100kN weight to achieve the desired density including lighting, barricading and maintenance of diversion, etc as per Tables 400.11 & 400.12 and Technical Specification Clause 406.

Providing and applying primer coat with bitumen emulsion (SS-1) on prepared surface of granular base including cleaning of road surface and spraying primer at the rate of 0.70- 1.0 kg/sqm using mechanical means as per Technical Specification Clause 502

Providing and applying tack coat with Bitumen emulsion (RS-1) using emulsion distributor at the rate of 0.25 to 0.30 kg per sqm on the prepared granular surface treated with Primer cleaned with Hydraulic broom as per Technical Specification Clause 503.

Providing, laying and rolling of open-graded premix carpet of 20 mm thickness composed of 13.2 mm to 5.6 mm aggregates either using penetration grade bitumen or emulsion to required line, grade and level to serve as wearing course on a previously prepared base, including mixing in a suitable plant, laying and rolling with a three wheel 80-100 kN static roller capacity, finished to required level and grades to be followed by seal coat of either Type A or Type B or Type C as per Technical Specification Clause 508.

Providing and laying seal coat sealing the voids in a bituminous surface laid to the specified levels, grade and cross fall using Type A, Type B and Type C as per Technical Specification Clause 510

Provision of 15 nos. rumble strips covered with premix bituminous carpet, 15-20 mm high at centre, 250 mm wide placed at 1 m centre-to-centre at approved locations to control speed, marked with white strips of road marking paint.

Providing and fixing of retro-reflectorised cautionary, mandatory and informatory sign as per IRC:67 made of encapsulated lens type reflective sheeding vide Clause 1701.2.3 fixed over aluminium sheeting, 1.5 mm thick supported on a mild steel angle iron post 75 mm x 75 mm x 6 mm firmly fixed to the ground by means of properly designed foundation with M15 grade cement concrete 450 mm x 450 mm x 600 mm, 600 mm below ground levels as per drawings and Technical Specification Clause 801

Logo board

Circular Sign board

Octozonal Sign board

Citizen board

Name board

Maintanance board

Provision for reflector

Provision for Km stone

Ordinary Hm stone(Precast)

Road Marking with hot applied hermoplastic compound with Reflectorising Glass Beads on Bituminous surface

Construction of 1.5m RCC Slab Culvert @ Ch24,4340,5883 & 7170

Earthwork excavation for foundation in all soils and sub soil to full depth as may be directed except in hard rock requiring blasting but inclusive of shoring strutting and requiring the sides of foundation

Supplying and filling foundation and basement with filling sand in layers not more than 15 cm thick well rammed , wateed and compacted complete complying with satndard specifications and as directed.

Cement concrete 1:2.5: 5 mix using M15 mm HBG metal for foundation including watering wherever necessary and laind in layes of not more than 15 cm thick compacting etc., complete complying with standard specifications and as directed.

Cement concrete 1:2:4 mix using M20 mm Grade HBG meatl for foundation including watering wherever necessary and laid in layers of not more than 15 cm thick, compacting etc., complete complying with satndard specifications and as directed., BELOW SILL LEVEL

Cement concrete 1:2:4 mix using M20 mm Grade HBG meatl for foundation including watering wherever necessary and laid in layers of not more than 15 cm thick, compacting etc., complete complying with satndard specifications and as directed., ABOVE SILL LEVEL

Cement concrete 1:2:4 mix using M20 mm Grade HBG meatl for foundation including watering wherever necessary and laid in layers of not more than 15 cm thick, compacting etc., ABOVE SILL LEVEL

Cement concrete 1:1.5:3 using 20 mm ISS HBG metal for all RCC item of works excluding cost of reinforcement and fabricating charges , centering and shuttering but including curing and shall be finished smooth with CM 1:3 , 12 mm thick and with kraft paper without claiming as extra as directed by the departmental officers complete complying with standard specifications.

Supplying and fabricating and placing in position MS steel or ribbed Tor Steel for all Reinforced Cement Concrete works as per the design given including cost of steel and binding wire in all floors etc., complete complying with standard specification( mS rod or RTS bar will be supplied departmentally at section stores and cost will be recovered at issue rate). the binding wire shall supplied by the contractor.

providing and fixing 20mm thick compressible fibre board

Providing and fixing Tar Paper for bearing Between Bed block and deck slab

Providing weepholes in brick masonry / stone masonry , plain/ reinforced concrete abutment , wing wall, return wall with 100 mm dia AC pipe extending through the full width of the structures with slope of 1(V) : 20 (H) towards drawing face complete as per drawing and technical specifiaction cluses 614,709,1204.3.7

Gravel filling between body wall including cost and conveyance of gravel, labour for filling, watering and compacting etc., complete complying with satndard specification and as directed by the departmental officer.

Construction of 1.5m RCC Slab Culvert @ Ch 3085

Earthwork excavation for foundation in all soils and sub soil to full depth as may be directed except in hard rock requiring blasting but inclusive of shoring strutting and requiring the sides of foundation

Supplying and filling foundation and basement with filling sand in layers not more than 15 cm thick well rammed , wateed and compacted complete complying with satndard specifications and as directed.

Cement concrete 1:2.5: 5 mix using 40 mm HBG metal for foundation including watering wherever necessary and laind in layes of not more than 15 cm thick compacting etc., complete complying with standard specifications and as directed.

Cement concrete 1:2: 4 mix using 40 mm HBG metal for foundation including watering wherever necessary and laind in layes of not more than 15 cm thick compacting etc., complete complying with standard specifications and as directed.

Cement concrete 1:2: 4 mix using 40 mm HBG metal for foundation including watering wherever necessary and laind in layes of not more than 15 cm thick compacting etc., complete complying with standard specifications and as directed.

Cement concrete 1:2:4 mix using 20 mm Grade HBG meatl for foundation including watering wherever necessary and laid in layers of not more than 15 cm thick, compacting etc., complete complying with satndard specifications and as directed.,

Cement concrete 1:1.5:3 using 20 mm ISS HBG metal for all RCC item of works excluding cost of reinforcement and fabricating charges , centering and shuttering but including curing and shall be finished smooth with CM 1:3 , 12 mm thick and with kraft paper without claiming as extra as directed by the departmental officers complete complying with standard specifications.

Supplying and fabricating and placing in position MS steel or ribbed Tor Steel for all Reinforced Cement Concrete works as per the design given including cost of steel and binding wire in all floors etc., complete complying with standard specification( mS rod or RTS bar will be supplied departmentally at section stores and cost will be recovered at issue rate). the binding wire shall supplied by the contractor.

providing and fixing 20mm thick compressible fibre board

Providing and fixing Tar Paper for bearing Between Bed block and deck slab

Providing weepholes in brick masonry / stone masonry , plain/ reinforced concrete abutment , wing wall, return wall with 100 mm dia AC pipe extending through the full width of the structures with slope of 1(V) : 20 (H) towards drawing face complete as per drawing and technical specifiaction cluses 614,709,1204.3.7

Gravel filling between body wall including cost and conveyance of gravel, labour for filling, watering and compacting etc., complete complying with satndard specification and as directed by the departmental officer.

Construction of CC Drain with cover slab culvert @ Ch6382m.

Earth work Excavation in all soils and Sub Soil to full depth as may be directed except in hard rock requiring blasting but inclusive of shoring strutting, Sectioning the street to lay concrete pavement per SS 20 A.

Cement concrete 1 : 2.5 : 5 mix using M15 Grade HBG metal , including watering wherever necessary and laid in layers of not more than 15cm thick., compacting etc., complete complying with standard specifications and as directed.for foundation

Cement concrete 1 : 2 : 4 mix using M20 Grade HBG metal for foundation including watering wherever necessary and laid in layers of not more than 15cm thick., compacting etc., complete complying with standard specifications and as directed.(Above Sill Level)

Supplying and Fabricating and placing in position MS steel or Ribbed Tor Steel for all Reinforced Cement Concrete works as per the design given including cost of steel and binding wire in all floors etc, Complete complying with stanard specification.(MS rod or RTS bar will be supplied departmentally at section stores and cost will be recoverd at issue rate). the binding wire shall supplied by the contactor.

Cement concrete 1:1.5:3 using 20mm ISS HBG metal for all RCC item of works excluding cost of Rein forcement and fabricating charges, centering and shuttering but including curing and shall be finished smooth with cement mortar 1:3, 12mm thick. and with kraft paper without claiming extra as directed by the departmental officers complete complying with standard specifications.

Plastering with CM 1:4, 15mm thick.over the Cocrete and RR Mssonry including curing etc., complete complying with standard specifications and as directed by the

Dismantling

Dismantling of existing structures like culverts, bridges, retaining walls and other structure comprising of masonry, cement concrete, wood work, steel work, including T&P and scaffolding wherever necessary, sorting the dismantled material, disposal of unserviceable material and stacking the serviceable material with all lifts and lead of 1000 m as per Technical Specification Clause 202.

Dismantling of existing structures like culverts, bridges, retaining walls and other structures comprising of brick masonry, including disposal of unserviceable material and stacking the serviceable material with all lift and lead of 1000 m as per Technical Specification Clause 202.

Dismantling of existing structures like culverts, bridges, retaining walls and other structure comprising of masonry, cement concrete, wood work, steel work, including T&P and scaffolding wherever necessary, sorting the dismantled material, disposal of unserviceable material and stacking the serviceable material with all lifts and lead of 1000 m as per Technical Specification Clause 202., Reinforced Cement Concrete

Removing all types of Hume pipes and stacking within a lead of 1000 m including Earthwork and Dismantling of Masonry Works as per Technical Specification Clause 202.

Construction of Protective work at KM 5555-5570, 7045-7150

Earth work Excavation for Foundation in all soils and Sub Soil to full depth as may be directed except in hard rock requiring blasting but inclusive of shoring strutting and requiring the sides of foundation.

Cement concrete 1 : 2.5 : 5 mix using M15 HBG metal , including watering wherever necessary and laid in layers of not more than 15cm thick., compacting etc., complete complying with standard specifications and as directed.for foundation

Cement concrete 1 : 2 : 4 mix using M20 Grade HBG metal for foundation including watering wherever necessary and laid in layers of not more than 15cm thick., compacting etc., complete complying with standard specifications and as directed.( Below Sill Level )

Cement concrete 1 : 2 : 4 mix using M20 Grade HBG metal for foundation including watering wherever necessary and laid in layers of not more than 15cm thick., compacting etc., complete complying with standard specifications and as directed.( Above Sill Level )

Providing weepholes in brick masonry/stone masonry, plain/reinforced concrete abutment, wing wall, return wall with 100 mm dia AC pipe extending through the full width of the structures with slope of 1(V):20(H) towards drawing face complete as per drawing and technical specification Clauses 614, 709, 1204.3.7

Providing and fixing 20mm thick compressible fiber board in expansion joint complete as per drawing and MORD technical specifications.

Maintenanace I year

Maintenanace II year

Maintenanace III year

Maintenanace IV year

Maintenanace V year

GST Amount for providing Service to Government Contract Works for the above Construction & Maintenance Works. { GST Amount is the Total GST Amount for overall quoted amount (Both Construction and Maintenance) above this row in column "BB" for all works in this package} (Refer Clause 13.2 & 13.3 of Section 2 of Instruction to Bidders (ITB) of SBD)

Maniandco