Loading…
Loading…
| # | Company | Status |
|---|---|---|
| 1 | Admitted-Finance | Admitted-Finance |
| 2 | Admitted-Finance | Admitted-Finance |
| 3 | Admitted-Finance | Admitted-Finance |
| 4 | Admitted-Finance | Admitted-Finance |
| 5 | Admitted-Finance | Admitted-Finance |
Tender Value
₹14.7 L
EMD Value
₹29,400
Closing Date
20 Oct 2022, 4:00 pmClosed
Executive Engineer ED-II JPDCL Jammu
Office of the Executive Engineer ED-II JPDCL Jammu
Shifting of 11/0.433KV 250KVA Distribution Substation and laying of HT/LT line using ACSR Rabbit Conductor at Sanjay Nagar Sec-3 (Sukhwinder Singh), Jammu on Turnkey Basis (Under Capex Budget 2022-23).
2022_PDD_191160_1
E-Nit 46 of 2022 dated 03-10-2022
Open Tender
Electrical Works
Turn-key
45 days
Within Jurisdiction of the XEN ED- II JPDCL Jammu
Please refer Tender documents.
3 documents required · 3 mandatory
₹1,000
Executive Engineer ED II JPDCL Jammu
₹29,400
7 Nov 2022
6 Oct 2022
21 Oct 2022
6 Oct 2022
20 Oct 2022
6 Oct 2022
6 Oct 2022 - 20 Oct 2022
Amount
Dismantling of 11/0.433kV, 250KVA , 3-phase Distribution Substation at Sanjay Nagar Sec-3 (Sukhwinder Singh), Jammu
Dismantling of 11/0.433 KV, 250 KVA 3-Phase Distribution Transformer
Dismantling of 9 Mtr Long ST/PCC Pole
Dismantling of Gapless Surge Arrestor,9 kV ,10 kA ,LA
Dismantling of 11kV GO, AB Switch 3-Phase, 3-Pole, 200 Amp, Vertical Type
Dismantling of 11 kV Horn Gap Fuse Set 3 Phase 200A
Dismantling of Single Phase PVC Cables
Dismantling of 11kV Polymeric composite Disc Insulator 12kV with Fitting,
Dismantling of MS Channel Iron, Cross arms, Angle Iron Braces, Clamps etc
Dismantling of 11kV Polymeric composite Pin Insulator 12kV, 5kN.
Write back of dismantled material except 250KVA transformer to Divisional Store.
Re-Erection of Dismantled 11/0.433kV, 250KVA , 3-phase Distribution Substation at Sanjay Nagar Sec-3 (Sukhwinder Singh), Jammu
Re-Erection of Dismantled 11/0.433 KV, 250 KVA 3-Phase Distribution Transformer
Supply, Transportation, Erection of 9 Mtr Long ST Pole (ST-410 SP33) including excavation of pit and back filling of soil & consolidating by ramming, watering etc. Including painting with two coats of Red Oxide and Al. Paint for smooth surface.
Supply & Fixing of Gapless Surge Arrestor,9 kV ,10 kA ,LA with polymer housing, Stn. Type
Supply, Installation, Testing & Commissioning of 11kV GO, AB Switch 3-Phase, 3-Pole, 200 Amp, Vertical Type
Supply, Installation, Testing & Commissioning of 11 kV Horn Gap Fuse Set 3 Phase 200A
Providing & Fixing of Single Phase PVC Cable 240 mm² ,1.1K V Grade, PVC Insulated Stranded Un-Armoured FRLS type alongwith Al. Thimbles for 240 mm² Cable termination with four colored PVC Tapings to distinguish the LT Phases and the Neutral. (2 Ckt)
11kV Polymeric composite Disc Insulator 12kV with Fitting, min failing load 45kN, Lighting Impulse 75kV Positive and 80kV Negative, creepage distance 320mm
Supply, Transportation, Fabrication & Fixing of MS Channel Iron, Cross arms, Angle Iron Braces, Clamps etc duly fabricated, red oxide & aluminium paint coated including all necessary Nut & Bolts & Washers etc.
Providing of Earthing of substation --Excavation of earth pit of dia 650 mm & depth 3000 mm, installation of Earthing pipe of 40 mm Nominal bore & 4mm wall thickness & length 2.5 mtr long as Per IS 1239.GI Strip for neutral earthing of size 25 mm x 3 mm for connection of transformer body,G.O Set & lightening arrestor as per IS 2629/85, GI nuts & bolts,refilled with earth enhancement materials and earth Chamber made of brick masonary with RCC slab cover.
Providing & Fixing of 11kV Polymeric composite Pin Insulator 12kV, 5kN, Lighting Impulse 75kV Positive and 80kV Negative, creepage distance 320mm
Providing & Fixing of Galvanised Stay Set with 50x8mm stay clamp, guy insulator(2Nos.), anchor plate (200x 200 x 6 mm), nut-bolts, 2 Nos turn-buckles, 1.8m long, 16 mm diameter solid GS stay rod & 7/3.15 mm dia GI stranded wire complete
Providing & Fixing of Wedge Connectors / PG Clamps
Providing & Fixing of Danger Plates with Clamps
Providing & Fixing of Anti Climbing device with Clamps
Providing of Cement bottoming 1:2:4 mix as per REC standards 0.5cum/pole
Particulars of works for erection of 0.8 Km 11KV line with ACSR Rabbit Conductor on 9 Mtrs PCC poles at Sanjay Nagar Sec-3 (Sukhwinder Singh), Jammu
Supply, Erection, Testing & Commissioning of 9 Mtr Long PCC Pole (WL-300Kg) including Transportation to erection site, excavation of pit and back filling of soil & consolidating by ramming, watering etc.
Supply, Transportation, Fabrication & Fixing of MS Channel Iron, Cross arms, Angle Iron Braces, Clamps etc duly fabricated, red oxide & aluminium paint coated including all necessary Nut & Bolts & Washers etc.
Supply, Laying & Stringing of ACSR Rabbit Conductor on Cross arms through insulators including proper binding & twisting with soft Aluminium Wire
Providing & Fixing of PG Clamps for 50mm² ACSR Conductor
Providing & Fixing of 11kV Polymeric composite Pin Insulator 12kV, 10kN, Lighting Impulse 75kV Positive and 80kV Negative, creepage distance 320mm
Providing & Fixing of 11kV Polymeric composite Disc Insulator with fitting 12kV,min failing load 45kN, Lighting Impulse 75kV Positive and 80kV Negative, creepage distance 320mm
Providing & Fixing of Galvanized Nuts and Bolts
Providing & Fixing of Danger Plates with Clamps
Providing & Fixing of Anti-Climbing Device with Clamps
Providing of Earthing Complete by GI Pipe 40 mm or GI Rod 20mm 2.5 mtr long through GI Strip.
Providing & Fixing of Stone Pad (300 mm x 300 mm x 75 mm)
Providing & Fixing of Aluminium Jointing Sleeves
Providing & installation of Galvanised Stay Set with 50x8mm stay clamp, guy insulator(2Nos.), anchor plate (200x 200 x 6 mm), nut-bolts, 2 Nos turn-buckles, 1.8m long, 16 mm diameter solid GS stay rod & 7/3.15 mm dia GI stranded wire complete
Laying of 1.200 Km 3Ph4W LT line on 8Mtr PCC poles using ACSR Rabbit Conductor at Sanjay Nagar Sec-3 (Sukhwinder Singh), Jammu
Supply, Transportation, Erection of 8 Mtr Long PCC Pole (WL-200 KG) including excavation of pit and back filling of soil & consolidating by ramming, watering etc.
Providing & Fixing of MS U-Clamp duly painted with two coats od Red Oxide and Al Paint with Shackle Insulator (Porcelain) along with Nut & Bolt of sorts
Supply, Laying & Stringing of ACSR Rabbit Conductor through insulators including proper binding & twisting with soft Aluminium Wire
Providing & Fixing of Stay Set with 50 x 8 mm Stay Clamp, Guy Insulator (2 Nos), Anchoring Plate (200 x 200 x 6 mm), Nut & Bolts, 2 No Turn Buckle, 1.8m long, 16 mm diameter solid Stay Rod & 7/3.15 mm dia stranded wire complete
Providing & Fixing of Danger Plates with Clamps
Providing & Fixing of Anti Climbing device with Clamps
Providing & Fixing of LT Line Spacers
Providing of Earthing Complete by GI Coil ----Nominal diameter of the G.I Wire 4mm, No. of closely bound turns 115, External Dia of the coil 50mm, Length of Coil 460mm, Free length of GI Wire at one end of coil 2500mm, Total Weight of Coil 1.850Kg.
Providing of Stone Pad 300 mmx300mmx75mm
Providing and fixing of Aluminium sleeves
M/S DAYAL BUILD TECH
M/S NEW TRIKUTA TECHNOCRATES
M/S COMBINE GROUP OF ENGINEERS
VEENA CONSTRUCTION CO.
Zeal Power
stage.html
html • 0.04 MB
tech_bid_open.pdf
tech_eval.pdf
boq_comp_chart.xlsx
xlsx
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.04 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .