Civil Works for Up gradation of Guest House Transport Area and other Misc Works in HAL Township Area

Name of the Individual / Firm / Company: * Mandatory

Type of ownership

Details of Constitution or Legal Status such as certificate of incorporation, shops and establishments, Contractor registration No etc.,

Address for correspondence:

GST NO.:

PAN No.:

Contact details

Please Enter Contact person Name

Pls Enter Mobile No

Average annual financial turn over during the last 3 years, ending financial year 2023 [ should not be less than 30% of Amount put to tender]. Turnover for 3 years are compulsory.

TURN OVER IN Rupees

Pls Enter Turn over in Rs. for all the 3 years

ESI & PF Nos with proof (If any)

Related Document to be Uploaded to e-Procurement Portal

Bank(s) details: [Copy of the cheque leaf to be uploaded]

Related Document to be Uploaded to eProcurement Portal (Note Canceled cheque leaf to be uploaded)

Latest Bankers Solvency Certificate from Nationalized/ scheduled Bank issued NOT before 12 months from the date of Tender submission.

Pls Enter Details to 'Name of the Bank' , 'Date of Issue','Value in Rs

Experience of having successfully completed similar works during last 7 years ending last day of month previous to the one in which applications are invited. [Latest work experience certificate may be uploaded] (i) THREE similar completed works each costing not less than the amount equal to 40% of the estimated cost. (ii) TWO similar completed works each costing not less than the amount equal to 50% of the estimated cost. (iii) ONE similar completed work each costing not less than the amount equal to 80% of Amount put to the tender.

80% (One Work)

Type of Work: [ Incase of private works the same shall be supported with TDS certificate]

Please enter Details for Work No 1

Type of Work: [ Incase of private works the same shall be supported with TDS certificate]

Pls Enter Details for Work No II

work done

Type of Work: [ Incase of private works the same shall be supported with TDS certificate]

Pls Enter Details for Work No III

Details of person holding the power of Attorney (If different from contact person)

Related Document to be Uploaded to eProcurement Portal

Pls Enter Details for Person holding Power of Attorney

DECLARATION I

Pls Accept The Delarication

DECLARATION II

Pls Accept the Delaration II

Description of Work

Earth work excavation for foundation of retaining walls,columns,etc., depth not exceeding 1.50 m in hard dense soil, other than rock including dewatering if required, getting out and stacking the earth including cost of tools, labour, transportation etc,with a lead of 1000mts including cost of tools, labour, transportation etc., all as directed by EIC.

Dismantling the existing brick masonry / brick bat coba treatment made in Cement mortar of any thickness as directed and sorting / stacking the useful materials and removal of debris from site upto a distance of 2.00km including cost of tools, labour, transportation etc., all as directed by EIC.

Dismantling the existing R.C.C. work manually/ by mechanical means including stacking of steel bars and disposal of unserviceable material within 50 metres lead of any thickness as directed and sorting / stacking the useful materials and removal of debris from site upto a distance of 2.00km including cost of tools, labour, transportation etc., all as directed by EIC.

Providing and laying plain cement concrete (PCC) 1:3:6 using 20mm down graded hard granite i.e. stone aggregate for foundation, floor etc., wherever required, at all depths including mixing, placing in position, proper compacting,surface preparation curing, cost of all materials, labour, tools, transportation and all other incidental charges, etc., complete all as approved directed and specified by EIC

Providing and laying cement concrete (RCC) 1:1.5:3 using 20mm down graded hard granite i.e. stone aggregate for foundation, floor etc., wherever required, at all depths including mixing, placing in position, proper compacting,surface preparation curing, cost of all materials, labour, tools, transportation and all other incidental charges, etc., complete all as approved directed and specified by EIC

Supplying and Fabricating TMT (Fe 500 grade) reinforcement bars of all diameter, conforming to IS, for reinforcement in RCC works as per drawings, including cutting, bending, lapping, hooking, welding wherever required and placing in position with binding wires at all levels and position. Binding wire shall be of approved quality and of 16 SWG, complete with rates including cost of all material, labour, wastages, transportation charges etc., all as directed and approved by EIC.

Providing & fixing on roof pressed clay tile (Mangalore tile) of 20 mm nominal thickness and of approved size and design as per approved pattern complete with rates including cost of all material, labour, wastages, transportation charges etc., all as directed and approved by EIC.

Providing and laying factory made chamfered edge Cement Concrete paver blocks of Classic make of 60mm thick cement concrete paver block of M-35 grade with approved colour, design & pattern in footpath, parks, lawns, drive ways or light traffic parking etc, of required strength, thickness & size/ shape, made by table vibratory method using PU mould, laid in required colour & pattern over 50mm thick compacted bed of sand, compacting and proper embedding/laying of inter locking paver blocks into the sand bedding layer through vibratory compaction by using plate vibrator, filling the joints with sand and cutting of paver blocks as per required size and pattern, finishing and sweeping extra sand. complete all as per direction of Engineer-in-Charge.

Providing and removing centering / form work to RCC works for roof slab by providing MS shuttering plates over with MS Jack coupling supports with all required supports, struts, wedges, scafolder, bracings, ladder gangways, dressing with shuttering oil including MS bolts, nuts and washers, temporary openings for filtering for stop, chamfered edges, internal / external splayed, rounded edges or grooves for forming threading etc. for fair finished surface at any height/level complete with rates including cost of material,tools, labour, transportation etc., all as directed and specified by EIC.(Note the slab has to be cast at a height of approx. 24 feet above pith level using MS scaffolding along with retaining the same till the stripping period.)

Providing and removing centering / form work to RCC works for footing,foundations, bases of columns, etc. for mass concrete etc. by providing timber / MS shuttering plates with all required supports, struts, wedges, scafolder, bracings, ladder gangways, dressing with shuttering oil including MS bolts, nuts and washers, temporary openings for filtering for stop, chamfered edges, internal / external splayed, rounded edges or grooves for forming threading etc.for fair finished surface at any height/level complete with rates including cost of material,tools, labour, transportation etc., all as directed and specified by EIC.

Providing and removing centering / form work to RCC works for columns, beams etc. by providing timber / MS shuttering plates with all required supports, struts, wedges, scafolder, bracings, ladder gangways, dressing with shuttering oil including MS bolts, nuts and washers, temporary openings for filtering for stop, chamfered edges, internal / external splayed, rounded edges or grooves for forming threading etc.for fair finished surface at any height/level complete with rates including cost of material,tools, labour, transportation etc., all as directed and specified by EIC.

Providing and fixing at or near ground level precast cement concrete kerbstone in proportion 1:1.5:3 as per approved pattern and setting in position with cement mortar 1:3 including the cost of required centering,shuttering complete including necessary scaffolding,curing complete as specified and as directed by EIC.

Providing 304 Grade Stainless Steel pipes (preferably round pipes) of any size,thickness,shape etc of Jindal or equivalent make including SS holdfasts, SS flanges,etc of approved size and make including bending of pipes to required angle,polishing / buffing,etc and fixing the same in . The rate shall include cost of all materials,bending,fixing,welding,charges,transportation,taxes, wastage,etc all as specified and directed by EIC.

Providing 304 Grade Stainless Steel chain of 5mm thickness of any size,thickness,shape etc of Jindal or equivalent make including SS flanges,etc of approved size and make including bending of pipes to required angle,polishing / buffing,etc and fixing the same in . The rate shall include cost of all materials,bending,fixing,welding,charges,transportation,taxes, wastage,etc all as specified and directed by EIC.

Removing the old ceramic/ vitrified floor tiles/dado/skirting of any thickness as directed by and sorting / stacking the useful materials and removal of debris to a lead of 1000 M includig cost of all tools, labour , transportation etc, all as directed by EIC .(Debris should be collected in a gunny bag and disposed safely)

Dismantling doors, windows and clerestory windows (steel or wood) shutter including door frame, chowkhats, architrave, holdfasts etc. complete and stacking within 500 metres(approx.) lead by cutting the holdfasts and handing over the useful material to stores including cost of tools, labour, transportation , cleaning the site at all heights all as specified and directed by EIC.

Dismantling of old ventilators (steel or wood) complete and stacking within 500 metres(approx.) lead by cutting the holdfasts and handing over the useful material to stores including cost of tools, labour, transportation , cleaning the site at all heights all as specified and directed by EIC.

Removal of existing GI pipes of size of 15mm to 40mm along with fittings and handing over the useful materials to stores as directed by EIC

Dismantling C.I. pipes including excavation and refilling trenches after taking out the pipes upto size 150mm diameter, manually/ by mechanical means breaking lead caulked joints, melting of lead and making into blocks including stacking of pipes & lead at site within 500 metre lead as per direction of Engineer-in-charge

Supplying and fixing Providing and fixing Ist quality ceramic glazed wall tiles conforming to IS: 15622 of thickness 8-9mm of KAJARIA or JOHNSON or NITCO make, in all colours, shades except burgundy, bottle green, black of size 450x300mm with edge PVC beading as approved by Engineer-in-Charge, in skirting, risers of steps and dados, over 12 mm thick bed of cement mortar 1:3 (1 cement : 3 coarse sand) and jointing with grey cement slurry @ 3.3kg per sqm, including pointing in white cement mixed with pigment of matching shade complete as approved, specified and directed by EIC

Supplying and Fixing Glazed Vitrified floor tiles of Matt/Antiskid finish of (KAJARIA / NITCO / JOHNSON) make of size 600 X 600 mm, 10mm thick, for wall dado of approved design and pattern fixed over CM 1:4, 20 mm thick and neat grey cement slurry of honey like consistency spread at the rate of 3.3 kg/sq.m and jointed with approved joint filler of matching colour / shade etc. complete to avoid any seepage, with rates including cost of material, labour charges, tools, lifts, leads, transportation etc., all as approved, specified and directed by EIC.

Providing and constructing brick work with best locally available frogged flyash bricks class designation 7.5 in CM 1:4 for walls at all levels and for all thickness in standard bonds including raking out joints 10mm deep to receive plaster, chipping of existing brick walls / concrete surfaces where ever new walls are meeting in order to arrest cracks, applying cement slurry before constructing wall to have proper bond, necessary scaffolding, curing etc., complete with rates including cost of material ,tools, labour, transportation etc., all as directed and specified by EIC.

Plastering external/internal brickwalls / concrete surfaces with C.M 1:4, 20 mm thick trowelled to even and smooth finish including cost of all materials, labour, curing, scaffolding, at all heights,etc. at heights mentioned below including material,scafolding etc as directed by EIC.

Providing and fixing floor mounted light coloured glazed porceline European water closet (EWC) with integrated white/coloured vitreous china cistern of Jaguar make of model no-CNS-WHT-853S220SPPSM size 370x665x750mm confirming to IS: 2556 with 'P' or 'S' trap or equivalent make, vitreous china single piece, double traps syphonic water closet of approved brand/make, shape, size and pattern including integrated white vitreous china cistern of capacity 10 litres with dual flushing system, including all fittings and fixtures with seat cover, cistern fittings, nuts, bolts and gasket etc including making connection with the existing P/S trap, complete inlcuding fixing, in all respect as per directions of Engineer-in-Charge.

Supplying and Fixing 18-20mm thick polished Granite slabs for wash basin platform/washbasin supports with egdes rounded and polished of required size of approved quality, colour( Jet black), texture and finish, jointed with cement slurry and pointed with cement mixed with pigment to match the colour, including wastages,curing complete with rates including including rubbing, curing, finishing, providing holes of required diameter, providing opening to fix counter basins, cost of all material,labour,tools,transportation etc., complete all as approved, specified and directed by Engineer In Charge.

Supplying and fixing table top wash basin of model-OPS-WHT-15931PM from Jaguar make and basin mixer of model-VGP-81011B or suitable basin mixer model for wash basin from Jaguar make or equivalent make,with 450mm long braided hoses for inlet connection pipe ,130mm length 32mm dia waste coupling model , CP bottle trap -ALD-769L from Jaguar etc or equivalent all approved quality complete,with rates including cost of material, labour charges, tools, lifts, leads, transportation etc., all as approved, specified and directed by EIC.

Supplying and fixing table top wash basin of model-OPS-WHT-15931PM from Jaguar make and pillar cock of model-FLP-5011PM from Jaguar or equivalent make,with 450mm long braided hoses for inlet connection pipe ,130mm length 32mm dia waste coupling model , CP bottle trap -ALD-769L from Jaguar etc or equivalent all approved quality complete,with rates including cost of material, labour charges, tools, lifts, leads, transportation etc., all as approved, specified and directed by EIC.

Supplying and fixing angle cock model no LYR-38053 from Jaguar make or in equivalent make all approved quality complete,with rates including cost of material, labour charges, tools, lifts, leads, transportation etc., all as approved, specified and directed by EIC.

Supplying and fixing 2 in 1 bib cock model no VGP-81041 of JAGUAR make or in or equivalent all approved quality complete,with rates including cost of material, labour charges, tools, lifts, leads, transportation etc., all as approved, specified and directed by EIC.

Supplying and fixing CP health faucet model no ALD-563 product from JAGUAR make along with 1meter long flexible tube and wall hook complete, with rates including cost of material, labour charges, tools, lifts, leads, transportation etc., all as approved, specified and directed by EIC.

Supplying and fixing CP towel ring product code-ACN-1121BN from JAGUAR make or equivalent with rates including cost of material, labour charges, tools, lifts, leads, transportation etc., all as approved, specified and directed by EIC.

Supplying and fixing SS towel rack 600mm long with hooks ring product code-ACN-1181FHS from JAGUAR make or equivalent with rates including cost of material, labour charges, tools, lifts, leads, transportation etc., all as approved, specified and directed by EIC.

Supplying and fixing Soap dish holder roduct code-ACN-1131N from JAGUAR make or equivalent with rates including cost of material, labour charges, tools, lifts, leads, transportation etc., all as approved, specified and directed by EIC.

Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes of 50mm dia of Ashirvad/Astral or equivalent make , having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, including fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and testing of joints complete as per direction of Engineer in Charge.

Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes of 25mm dia of Ashirvad/Astral or equivalent make for concealed work, including cutting chases and making good the walls , having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, including fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and testing of joints complete as per direction of Engineer in Charge.

Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes of 20mm dia of Ashirvad/Astral/Prayag or equivalent make for concealed work, including cutting chases and making good the walls ,having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, including fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and testing of joints complete as per direction of Engineer in Charge.

Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) gate valve for 50mm dia of Ashirvad/Astral/Prayag or equivalent make for concealed work, including cutting chases and making good the walls, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings. This includes jointing of pipes & fittings with one step CPVC solvent cement and testing of joints complete as per direction of Engineer in Charge.

Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) gate valve for 25mm dia of Ashirvad/Astral/Prayag or equivalent make for concealed work, including cutting chases and making good the walls, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings. This includes jointing of pipes & fittings with one step CPVC solvent cement and testing of joints complete as per direction of Engineer in Charge.

Supplying and fixing cylindrical vertical with closed top PVC water storage tanks with lid of approved colour of SINTEX or POLYCON make with ISI mark as approved by EIC of 2000 liters capacity, including providing and fixing of inlet /outlet overflow, washout facilities with necessary GI/PVC Nipples, check nuts, rubber washers, plugs,25mm diameter PTMT ball cocks / Float valve of PRAYAG / SYMET make or equivalant with necessary polyethelene balls, connecting rods etc., including providing and fixing a G.I coupling, cost of all materials etc., etc at all heights as specified and as directed by Engineer-in-charge.

Providing ,laying and fixing 110mm dia PVC SWR drainage pipes fixed to walls, in floors including rubber rings,etc of SUDHAKAR / PRINCE make including cost and conveyance of material, labour charges for fixing and cost of necessary fixtures , rubber etc. as approved and directed by EIC.

Providing ,laying and fixing 75mm dia PVC SWR drainage pipes fixed to walls, in floors including rubber rings,etc of SUDHAKAR / PRINCE make including cost and conveyance of material, labour charges for fixing and cost of necessary fixtures , rubber etc. as approved and directed by EIC.

Providing ,laying and fixing 110mm Dia PVC SWR Plain Bend , fixing for laying of lines of SUDHAKAR / PRINCE make including cost and conveyance of material, labour charges for fixing and cost of necessary fixtures , rubber etc. as approved and directed by EIC.

Providing ,laying and fixing 110mm Dia SWR PVC Door Plug Tee , fixing for laying of lines of SUDHAKAR / PRINCE make including cost and conveyance of material, labour charges for fixing and cost of necessary fixtures , rubber etc. as approved and directed by EIC.

Providing ,laying and fixing 110mm Dia SWR PVC Door Plug Bend , fixing for laying of lines of SUDHAKAR / PRINCE make including cost and conveyance of material, labour charges for fixing and cost of necessary fixtures , rubber etc. as approved and directed by EIC.

Providing ,laying and fixing 75mm Dia SWR PVC Plain Bend , fixing for laying of lines of SUDHAKAR / PRINCE make including cost and conveyance of material, labour charges for fixing and cost of necessary fixtures , rubber etc. as approved and directed by EIC.

Providing ,laying and fixing 75mm Dia SWR PVC Door Plug Tee , fixing for laying of lines of SUDHAKAR / PRINCE make including cost and conveyance of material, labour charges for fixing and cost of necessary fixtures , rubber etc. as approved and directed by EIC.

Providing ,laying and fixing 75mm Dia SWR PVC Door Plug Bend , fixing for laying of lines of SUDHAKAR / PRINCE make including cost and conveyance of material, labour charges for fixing and cost of necessary fixtures , rubber etc. as approved and directed by EIC.

Providing ,laying and fixing PVC SWR 75mm vent cowldrainage pipes fixed to walls, in floors including rubber rings,etc of SUDHAKAR / PRINCE make including cost and conveyance of material, labour charges for fixing and cost of necessary fixtures , rubber etc. as approved and directed by EIC.

Providing ,laying and fixing PVC SWR 100mm vent cowl for drainage pipes fixed to walls, in floors including rubber rings,etc of SUDHAKAR / PRINCE make including cost and conveyance of material, labour charges for fixing and cost of necessary fixtures , rubber etc. as approved and directed by EIC.

Providing ,laying and fixing 110mm dia PVC SWR Nahani trap, plain with CP jalli/grating on top including jointing with solvent cement, rubber ring / gaskets etc., including cost and conveyance of material, labour charges for fixing and cost of necessary fixtures ,solvent cement, rubber gasket, incidental charges, taxes, duties, levies etc., complete as directed and approved by EIC .

Providing , fabricating and fixing Aluminum ventilators of size required size with aluminum sections Top / horizontal members - 63.50 x 38.10 x1.95mm with glass glazing made of 4mm thick pin headed / Frosted glass including cost of material,labour,conveyance etc as directed by EIC.

Providing and fixing factory made single extruded WPC (Wood Polymer Composite) solid decorative type flush door shutter of 30mm thickness with stainless steel butt hinges and necessary S.S screws of required size comprising of virgin polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) having minimum density of 650 kg/cum and screw withdrawal strength of 1800 N (Face) & 900 N (Edge), minimum compressive strength 50 N/mm2, modulus of elasticity 850 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/moisture proof and fire retardant. WPC to be laminated with PVC foil of minimum 14 microns thick of approved design pasted with hot melt adhesive on both faces of shutter and fixing with stainless steel butt hinges of required size with necessary full body threaded star headed counter sunk S.S screws, all as per direction of Engineer-In- Charge.

Providing and fixing factory made single extruded WPC (Wood Polymer Composite) solid door/ window/ Ceosetory windows & other Frames/ Chowkhat of frame size 65 x 100 mm comprising of virgin PVC polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/ wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) fabricated with miter joints after applying PVC solvent cement and screwed with full body threaded star headed SS screws having minimum frame density of 750 kg/cum, screw withdrawal strength of 2200 N (Face) & 1100 N (Edge), minimum compressive strength of 58 N/mm2, modulus of elasticity 900 N/mm2 and resistance to spread of flame of Class A category with property of being termite/ borer proof, water/ moisture proof and fire retardant and fixed in position with M.S hold fast/ lugs/ SS dash fasteners of required dia and length complete as per direction of Engineer-In- Charge. (M.S hold fast/ lugs or SS dash fasteners shall be paid for separately). Note: For WPC solid door/ window frames, minus 5mm tolerance in dimensions i.e depth and width of profile shall be acceptable. Variationin profile dimensions on plus side shall be acceptable but no extra payment on this account shall be made.

Supply & Installation of Double leaf Automatic sliding door for clear opening upto 2mts with clear passage height =2800mm with Dormakaba ES 250 PRO EASY 4.15m, panel weight double sliding=2x100kgs,panel weight single sliding=1x120kgs.ES 250easy 4.15mt type B glass clamping rail-1050mm-2nos,Floor guide for glass door-2nos,ECW8-2nos,silver(for inside & outside) light barrier SBK 111-1pair,five position program switch with knob cable for program switch) Technical details:power supply supply voltage 230V,50/60Hz power consumption 130W on site line fuse 10A degree of protection IP20 Power supply for peripheral equipment under network conditions 27V DC/1A power supply for temperature range -20 degree centigrade to +60 degree centigrade, permissible air humidity(relative)(non-condensing)max 93%), including cost and conveyance of material, all the necessary fittings ,labour charges for fixing and cost of necessary fixtures , rubber etc. as approved and directed by EIC.(This item is excluding toughened sliding glass .Measurement of Toughened glass will be done seperately in respective item.)

Constructing brick masonry manhole with flyash bricks in cement mortar 1:4 ( 1cement : 4 coarse sand ) with R.C.C. top slab with 1:1.5:3 mix (1cement : 1.5 coarse sand (zone-III) : 3 graded stone aggregate 20mm nominal size), foundation concrete 1:4:8 mix (1 cement : 4coarse sand (zone-III) : 8 graded stone aggregate 40 mm nominal size), inside plastering 12 mm thick with cement mortar 1:3 (1 cement: 3 coarse sand) finished with floating coat of neat cement and making channels in cement concrete 1:2:4 (1 cement : 2 coarsesand : 4 graded stone aggregate 20 mm nominal size) finished with a floating coat of neat cement complete as per standard design Inside size 120x90 cm and 90 cm deep including C.I. cover with frame (heavy duty) 560 mm internal diameter, total weight of cover and frame to be not less than 208 kg (weight of cover 108 kg and weight of frame 100 kg) including cost and conveyance of material, labour charges for fixing and cost of necessary fixtures , rubber etc. as approved and directed by EIC.

Providing and fixing square-mouth S.W. gully trap 150 x 100 mm size P type. class SP-1 complete with C.I. grating brick masonry chamber with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 with water tight C.I. cover with frame of 300 x300 mm size (inside) the weight of cover to be not less than 4.50 kg and frame to be not less than 2.70 kg as per standard design,including cost and conveyance of material, labour charges for fixing and cost of necessary fixtures , rubber etc. as approved and directed by EIC.

Supplying and fixing of fountain of 5feet height 2-3 stages made in polished marble/ rough granite of approved design , fixed to plumb including cost and conveyance of material, labour charges etc. as approved and directed by EIC.

Providing and laying squared coursed rubble stone (CRS) masonry of approved size in CM 1:6 proportion for foundations and basement with splays and cutting built in proper bond, properly hearted, interstices filled with mortar and bond stones placed at every spacing of 1.5m in each course including leads, lifts, scaffolding, curing, and all other incidental and royalties operational charges etc. complete as directed by the EIC

Supplying, fabricating by welding and erecting M.S rolled structural members like I-Beams,channels , angles M.S pipes, MS square pipes,pipes, chequered plate etc in position as per the drawing by mechanical means of TATA, SAIL, RINL make conforming to IS specification including lifting,hoisting,fixing in position by welding at site,bolting and providing and applying two coats of Synthetic Enamel and providing and applying of one coat of Zinc Chromate primer of ASIAN paints, ICI, BERGER or equivalent make all as specified and directed by EIC.The relevant code of procedure for rolled steel section dimensions, welding ,erection and hoisting and tolerances allowed shall be complied.

Supplying ,carrying to site all approved materials providing and fixing in position pre-painted / colour coated galvalume profile sheets for 0.50 mm thick of JINDAL/TATA or equivalent make.(Total coated thickness),550 Mpa minimum,yield strength ,It shall be coated with hot dip alloy of 55% aluminium 43.50 % zinc 1.50 % silicon and finished with resin coat on both surfaces@150 gm/sqm of coating (Total both surfaces) having overall width & laid width as specified & shall be fixed using , the self drilling self tapping screwes shall be of required size as per site condition and the screws shall be fixed at suitable intervals as per standards procedure and direction of EIC. The contractor has to provide screw caps suiting the matching colour of sheet to avoid corrosion due to weather action and to give asethetic look. The make of screws shall be from HILTI,CORROSHIELD & BUILDEX.Penetration & side as well as end laps in sheet shall be sealed by using butyl sealant taps and silicon sealant.HDPE fillers shall be provided wherever required to close voids between sheets,sheet & fasteners etc,necessary overlaps as per manufacturers specification shall be provided. Make-JINDAL or equivalent all complete as per direction of EIC.

Supplying & fixing 1 HP capacity single phase, open well submersiable pump of Kirloskar / Crompton /CRI make for pumping water for fountain from the sumps etc along with delivering casing ,starter system and necessary foundation bolts etc, with rate including cost all materials,transportation, etc complete all as specified/approved and directed by EIC.

Providing and applying 2.5 mm thick road marking strips (retro-reflective) of specified shade/ colour using hot thermoplastic material by fully/ semi automatic thermoplastic paint applicator machine fitted with profile shoe, glass beads dispenser, propane tank heater and profile shoe heater, driven by experienced operator on road surface including cost of material, labour, T&P, cleaning the road surface of all dirt, seals, oil, grease and foreign material etc. complete as per direction of Engineer-in-charge and accordance with applicable specifications.

Providing and fixing G.I. chain link fabric fencing of made of G.I. wire of dia 4 mm of required width in mesh size 50x50 mm including strengthening with 2 mm dia wire or nuts, bolts and washers as required complete as per the direction of Engineer-in-charge.

Providing and fixing glazing With float glass panes of 5 mm thickness (weight not less than 12.50 kg/sqm) in M.S windows, window, ventilator shutters and partitions etc. with Oil putty/EPDM rubber / neoprene gasket etc. complete as per the architectural drawings and the directions of engineer-in-charge .

Providing and laying screed bed of cement concrete 1:2:4 with 6mm to 12.50mm hard granite stone aggregate terrace screed bed for grading with approved water proofing chemical ,pathways etc including mechanical vibration, watering, curing,with smooth finish at all heights etc. complete with rates including cost of material ,tools, labour, transportation etc., all as directed and specified by EIC. .(The cost of watreproofing compund will be paid seperately.)

Providing and mixing water proofing liquid of Dr.Fixit/Sika/Fosroc in cement concrete/plaster for each 50kg work in doses by weight of cement as per manufacturer's specification including cost of tools, labour, tranasportation etc., at all heights complete all as approved /specified and directed by EIC.(Providing and mixing of waterproofing liquid for each 50kg of cement bag as per specification will be measured as 'EACH').

Supplying and applying 120GSM Geotextile membrane with minimum overlapping as recomended by the manufacturer over a single component roof resistant elastomeric pure polyurethane membrane "Flexi PU270" of Dr.Fixit or equivalent of approved make forming a seamless coat free from dust,bitumen and tar,with minimum elongation coefficient of 400% and solid content of 90%.The system consists of water proofing treatment @ 1.8 Kg/Sqm in two coats to acheive a DFT of 1.2mm including appying a coat of PU / MI-EP primer of Dr.Fixit make or equivalent product etc all as per manufacture's specification . The rate shall include for cost of all materials,application charges,taxes,transportation etc all as specified,approved and directed by EIC.(All the application shpould be as per manufcature's specification and authorized personnel should be deployed for application.) (The defect liability period/maintenance period / guarantee period shall be 5 years from the date of completion as certified by EIC and contractor should submit a written guarantee on a non judicial Stamp paper of Rs. 200/- at contractors cost on approved format. A sum equivalent to 10% of executed amount of the item will be retained by HAL for Guarantee period)

Providing and fixing factory made precast RCC perforated drain covers, having concrete of strength not less than M-25, of size 1000 x 450x50 mm, reinforced with 8 mm dia four nos longitudinal & 9 nos cross sectional T.M.T. hoop bars, including providing 50 mm dia perforations @ 100 to 125 mm c/c, including providing edge binding with M.S. flats of size 50 mm x 1.6 mm complete, all as per direction of Engineer-in-charge.

Supply and laying of coarse sand (0.6mm to 4.75mm grain size) in play area including laying at specified area inside of building premises including cost of material ,tools, labour, transportation etc., all as directed and specified by EIC

Supplying and fixing wall mixer 3 in 1 system model no FUS-29281 of Jaguar make or eqivalent with provision for both hand shower and overhead shower complete with 115mm long bend pipe, connecting legs and wall flange of Jaguar make or equivalent make all approved quality complete,with rates including cost of material, labour charges, tools, lifts, leads, transportation etc., all as approved, specified and directed by EIC.

Supplying and fixing overhead shower model no OHS-1757 of Jaguar make or equivalent of 140mm round shape single flow with air effect (ABS body and face plate chrome plated) with Rubit cleaning system in equivalent make all approved quality complete,with rates including cost of material, labour charges, tools, lifts, leads, transportation etc., all as approved, specified and directed by EIC.

Supplying and fixing hand shower model no HSH-1717 of Jaguar make or 105mm round shape single flow with air effect (ABS body and face plate chrome plated) with Rubit cleaning system with 1.5mts long easy flex tube of Jaguar make or in equivalent make all approved quality complete,with rates including cost of material, labour charges, tools, lifts, leads, transportation etc., all as approved, specified and directed by EIC.

Providing and applying on prepared surface and applying two coats of interior Plastic emulsion paint of Asian paints or equivalent make of approved shade over a coat of primer Asian paint or approved make with rate including cost of all materials, tools,labour ,scaffolding,wastage, etc., complete at all as approved, specified , all made good and directed by EIC. Contractor should ensure all safety measures if work is carried out at heights at his own cost.The rates include for: (a) Use of all scaffoldings and cradles including hoisting and lowering.(b)Taking down, cleaning as directed and refixing blinds and fittings, picture rods, cornice poles and small items of builder’s hardware such as door knobs, finger plates, escutcheons, hooks etc. which are not required to be painted. (c) Use of dust sheets and other coverings for the protection of fixtures, fittings, furniture, etc. (d) Shifting of movable cupboards and furniture as required and replacing in position. (e) Work in patches (over one square metre each) including matching with existing work and marrying in at the edges. (f) Removing all splashes, drops, dirt, etc. and leaving premises in a clean state.

Supplying and applying approved quality approx 1mm thick wall care putty to walls(internal/external) surfaces from Asian paints/Wallplast/BIRLA make and carrying out punning to obtain smooth & even finish using EMERY paper 180 including cost of material, labour, wastage etc.,complete all as approved,all made good, specified and directed by EIC. Contractor should ensure all safety measures if work is carried out at heights at his own cost.

Refilling back the excavated earth within the premises after foundation work in layers of thickness not exceeding 150 mm each, ramming watering etc., including cost of tools, transportation from a distance of 50mts etc., all as specified and directed by the EIC.

Providing, laying and jointing glazed stoneware pipes class SP-1 of 150mm dia of approved make with stiff mixture of cement mortar in the proportion of 1:1 (1 cement : 1 fine sand) including cost of material, labour charges, tools, lifts, leads, transportation etc., all as approved, specified and directed by EIC.

Removing the existing old damaged GI chain link fencing by cutting/grinding and relocating the useful material to civil stores including cost of tools, labour, transportation , cleaning the site at all heights all as specified and directed by EIC.

Supply and fixing Heavy Spring Post Material : Highly Flexible PU,Height : 750 mm.approx. weight-approx. 1kg, High intensity reflective Tape:3 inch x 3 strips, UV Protected of Safety 365 make or equivalent of approved colour including,conveyance,labour charges, fixing, tools, wastages, taxes completed all as per the directions of EIC.

Supply and fixing of Convex Mirror - 32" (80 cm) Material: Polycarbonate Back Body,with erecting pole of Lens:Polycarbonate Mirror with 8feet pole 60mm dia and 1.5mm thickness of make Safety 365 or approved make including,conveyance,labour charges, fixing, tools, wastages, taxes completed all as per the directions of EIC.

Supply and fixing of Plastic Speed Breakers each piece of length of . Length : 250 mm, Width : 350 mm height: 50 mm, Capacity: 40 tons. Material: ABS,1Mtrs = 4 Pieces of approved colour including,conveyance,labour charges, fixing, tools, wastages, taxes completed all as per the directions of EIC.

Providing and fixing 12 mm thick toughened glass for Automatic sliding door of Saint gobain make with suitable powder quoted aluminium frame work of size 25mmx25mmx1.5mm with brackets,nut bolts, sheet metal screws,wastage including all necessary hardware accessories,structural sealant conveyance,labour charges, fixing, tools, wastages, taxes completed all as per the directions of EIC.

Supplying and Fixing Glazed vitrified floor tiles polished finish of (KAJARIA / NITCO / JOHNSON) make of size 600 X 600 mm, 10mm thick, for floors of approved design and pattern fixed with laticrete of 6 to 8mm thickness of consistency as per manufacturers specification as directed and jointed with approved joint filler of matching colour / shade etc. complete, with rates including cost of material, labour charges, tools, lifts, leads, transportation etc., all as approved, specified and directed by EIC.

Providing impervious coat plastering by rendering Cement mortar 1:3 (one part Cement :three parts coarse sand) over concrete / brick surfaces like ceiling, walls,terrace etc.by mixing with watreproofing chemical from Dr.Fixit/Fosroc/Sika as per manufactures specification finishing smooth and even, using trowel with all necessary scaffolding at all heights, etc., complete with rates including cost of all material, tools, labour, etc., all as directed and approved by EIC.(The cost of watreproofing compund will be paid seperately.)

Providing and fixing Stainless steel door aldrop 200mmx 15mm complete with screws confirming to IS etc. complete including cost and conveyance of material, labour charges for fixing and cost of necessary fixtures , rubber etc. as approved and directed by EIC.

Providing and fixing Stainless steel handle 150mm conforming to IS with necessary screws etc. complete including cost and conveyance of material, labour charges for fixing and cost of necessary fixtures , rubber etc. as approved and directed by EIC.

Providing and fixing Stainless steel tower bold 250mmx10mm conforming to IS with necessary screws etc. complete including cost and conveyance of material, labour charges for fixing and cost of necessary fixtures , rubber etc. as approved and directed by EIC.

Sucessful offer that is L-1 (Lowest offer) will be determined including GST.

The payment terms shall be governed as per the terms indicated in General conditions of contract.

Amount towards GST will be paid along with RAR payment against invoice.

The tenderers are requested to abide by the rules of prevailing GST act.

This BOQ specification has to be read in conjunction with technical specifications and tender drawings if any. Any ambiguty in these have to be brought to the knowledge of contract section before submission of tender to avoid future claims/dispute.