REPAIR TO CEILING WALL PANELING FLOORING JOINERY PLASTERING AND MISC WORKS TO BLDG OF SECTOR B UNDER GE 865 EWS

Amount

M&L for 2nd class soft wood clean sawn as in scantling fixed with nails, framed and fixed including dismantling timber scantling 40 sqcm and over in section, in any position as in framed work complete all as specified and directed.complete all as specified and directed.

M&L for 2nd class softwood clean sawn plain fillets, square,rectangular or triangular in section, clean sawn, secured with nails or brads exceeding 13 Sqcm and n.exc 25 Sqcm in section including dismantling timber scantling in fillets, rails, posts, rafters, purlins, etc. under 40 sq. cm in section as in framed work complete all as specified and directed.

M&L for 12mm thick ply wood (No of plys 07) BWR, type BB as in ceiling panelling fixed with nails to timber frame work, including dismantling wall and ceiling boards (Fiber, pulp, insulation, blankets) any thickness including covered fillets and supporting members.complete all as specified and directed. Make : DURA PLY/GREEN PLY/DURO/BHUTAN BOARD/ CENTURY/DURIAN

S & F gypsum ceiling board 10mm thick in 600 x 600 mm pannel designer ceiling conforming to IS-14862 type B category three including suspended false ceiling using E-grid suspended ceiling grid system of grid size 600x600mm with GI frame work of main runner 38 x 24mm sheet thickness 0.4mm, cross Tee 28 x 24mm sheet thickness 0.3mm and wall angle 24 x 24mm to be placed in the grid suspended by 4mm GI wire hanger to be fixed as per site requirement including taking down of old false ceiling complete. MAKE : EVEREST/ARMSTRONG/GYPROC

9mm thick prelaminated particle board, interior grade, prelaminated one side with decorative choice lamination & other side balancing white lamination, fixed with screws to timber frame work, complete including taking down of old particle boards any type all as specified and as directed by Engr-in-Charge. MAKE: NOVA PAN/GREEN PLY BHUTAN BOARD/MYSORE WOOD BOARD/CENTURY PLYWOOD

M&L for 6mm thick ply wood (No of plys 05) BWR, type BB as in ceiling panelling fixed with nails to timber frame work, complete including taking down of old ply wood any type all as specified and directed. Make : DURA PLY/GREEN PLY/DURO/BHUTAN BOARD/ CENTURY/DURIAN

M&L for wooden floor tiles 7 mm thick with dove tailed joints laid over 150 micron polythene film and 3 mm thick foam as per manufacturer's instructions, including taking down of old wooden flooring and fixed with decorative wooden beadings as per site requirement including taking down of wooden floor tiles any type complete all as spfd and directed.Make and shade of tiles be all as approved. Make : Action tesa/Kajaria/Armstrong

Provn of wooden panelling on vertical surface of wall using following specifications including taking down old wooden panelling complete all as specified and directed:-

S&F 2nd class hard wood wooden gutties of size 25mmx25mmx 200mm depth fixed in wall by making holes in brick wall and making good in cement mortar 1:3 complete all as specified and directed.

S&F horizontal runner 2nd class soft wood (Kali at 120 c/c of sextional area exc. 13 Sqm and n. exc 25 Sqm clean sawn treated with two coats of creoste oil mixed with good quality pesticide for antitermite treatment

S&F 1st class soft wood (Deodar) boarding 12mm to 15mm thick as in wall panelling planed one side, wrought and other side clean sawn and applying two coats of good quality varnish on plain surfaces over a coat of primer mixed with good quality pesticide for antitermite treatment on the other side and fixed with screws/nails on wooden runners.

S&F 1st class soft wood (Deodar) decorative breading 40mm wide on top surface of wall panelling including two coats of varnish.

Taking down chowkats or frames with shutters (without taking off shutters from frames) area exceeding 1.50 square metre and not exceeding 4.0 square metre each, including cutting holes for taking out hold fasts or dismantling brick work (holes cut and any other damage to jambs, walls for taking out hold fast shall be finished identical to existing finish without any extra cost to Govt. ), complete all as specified and directed by Engineer-in Charge.

Taking down chowkats or frames with shutters (without taking off shutters from frames) area not exceeding 1.50 square metre each, including cutting holes for taking out hold fasts or dismantling brick work (holes cut and any other damage to jambs, walls for taking out hold fast shall be finished identical to existing finish without any extra cost to Govt. ), complete all as specified and directed by Engineer-in Charge.

Taking down wooden shutters of any description exceeding 1.00 sqm but not exceeding 2.00 sqm, easing and adjusting and refixing the same in same opening with old builder's hardware as required complete all as specified and as directed bye Enginner-in-Charge.

M&L 2nd class hardwood plain, solid, straight chowkats and frames, wrought, framed rebated on the soild, rounded or chamfered, put together with glue pinned at joints, supplied and fixed plain fillets, square, rectangular or triangular in section clean swan, secured with nails or brads complete all as specified.

Factory made 35mm thick IInd Class Hard wood Plain, framed, panelled shutters (any number of panels), with panels of timber flat on both sides (feather edged), or of veneered particle board medium density, wood particle board with commercial face veneers: supplied and fitted to chowkats, complete all as specified and directed by Engineer-in-Charge. MAKE: M/S WOOD PRODUCT INDORE/M/S GOYAL INDUTRIES CORPORATION 8743 DESH BANDHU GUPTA ROAD NEW DELHI/ M/S JAIN WOOD INDUSTRIES MURTHAL SONIPAT/M/S PIONEER TIMBER PRODUCT CHANDIGARH/M/S SHIV JOINERY& FURNITURE INDUSTRIES JAMMU/M/S M.S JOINERY WORKS, PARIMPORA, SRINAGAR

S&F for factory made 35mm thick 2nd class hard wood, Glazed and skeleton shutters, open rebated and prepared to receive glass, gauze, etc. (without sash bars), edges of framing plain, chamfered or rounded. fitted with cut and mitred beads for securing glass, etc.; sizes of me-mbers of shutters as specified in SSR Part I, Section 8, clause 8.20 (a); supplied and fitted to chowkats all as specified and as directed by Engineer-in-Charge. MAKE: M/S WOOD PRODUCT INDORE/M/S GOYAL INDUTRIES CORPORATION 8743 DESH BANDHU GUPTA ROAD NEW DELHI/ M/S JAIN WOOD INDUSTRIES MURTHAL SONIPAT/M/S PIONEER TIMBER PRODUCT CHANDIGARH/M/S SHIV JOINERY& FURNITURE INDUSTRIES JAMMU/M/S M.S JOINERY WORKS, PARIMPORA, SRINAGAR

S&F for factory made 35mm thick 2nd class hard wood, glazed and skeleton shutters, open rebated and prepared to receive glass/gauge etc divided into squares, with plain , chamfered or rounded, mitred and rebated sash bars, any numbers edges of framing plain chamfered or rounded fitted with cut and mitred beads for securing glass etc size of members of door shutters as specified in SSR Part-I sec 8 clause 8.20 (b), fixed to chowkhat all as specified and as directed by Engineer-in-Charge. MAKE: M/S WOOD PRODUCT INDORE/M/S GOYAL INDUTRIES CORPORATION 8743 DESH BANDHU GUPTA ROAD NEW DELHI/ M/S JAIN WOOD INDUSTRIES MURTHAL SONIPAT/M/S PIONEER TIMBER PRODUCT CHANDIGARH/M/S SHIV JOINERY& FURNITURE INDUSTRIES JAMMU/M/S M.S JOINERY WORKS, PARIMPORA, SRINAGAR

S&F for Aluminum, anodized, barrel tower bolts, ISI Marked, of extruded section 200 mm long, complete all as specified and directed.

S&F for Aluminum, anodized, barrel tower bolts, ISI Marked, of extruded section 100 mm long, complete all as specified and directed.

Aluminium handles, cast type anodized of size 150 mm, ISI marked, complete all as specified and directed by Engineer-in- Charge.

Aluminium handles, cast type anodized of size 100 mm, ISI marked, complete all as specified and directed by Engineer-in- Charge.

S&F for Aluminium alloy, anodised, sliding door bolt, ISI Marked, 250mm long, with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts & sliding bolts of extruded sections or cast aluminium alloy complete all as specified and directed.

Butt hinges, medium weight, cold rolled mild steel and fixed with screws to wooden frames or with welding to existing MS frames, 100 mm size, ISI marked, complete all as specified and directed by Engineer-in- Charge.

Butt hinges, medium weight, cold rolled mild steel and fixed with screws to wooden frames or with welding to existing MS frames, 75 mm size, ISI marked, complete all as specified and directed by Engineer-in- Charge.

S&F 375 mm, ordinary rat tail rod pattern springs including roller and roller plate complete all as spcified and directed.

S&F for 4.80mm thick sheet plain glass ordinary quality and glazing with oil putty/ wooden beads with nails in square n.exe 0.5 Square metre in each pane etc including Hacking out old broken glass (any thickness size/ quality description) from metal frame including punching or drilling out old glazing pin/spring clips and providing and fixing new one complete all as specified and directed. MAKE: SAINT GOBAIN/MODI GUARD/ATUL/ASAHI

S&F for 4.80mm thick sheet plain glass ordinary quality and glazing with oil putty/ wooden beads with nails in square exceeding 0.5 Square metre in each pane etc including Hacking out old broken glass (any thickness size/ quality description) from metal frame including punching or drilling out old glazing pin/spring clips and providing and fixing new one complete all as specified and directed. MAKE: SAINT GOBAIN/MODI GUARD/ATUL/ASAHI

S&F for 3.00mm thick sheet plain glass ordinary quality and glazing with oil putty/ wooden beads with nails in square n.exe 0.5 Square metre in each pane etc complete all as specified and directed. MAKE: SAINT GOBAIN/MODI GUARD/ATUL/ASAHI

Galvanised mild steel wire cloth 0.56mm nominal dia wire and average width of aperture 1.18mm and fixed with tinned tacks of galvanised wire staple to steel windows/fixed with wooden beads of 2nd class HW to wooden doors/windows complete all as specified and directed.

Anodised aluminium frame for doors, windows, ventilators and partition with one or more rebates including joining cleat for fixing etc., section 100 x 44.50 mm made from 1.50 mm thick aluminium powder coated (minimum 50 micron thickness) complete all as specified and as directed by Engineer-in-Charge. Make: JINDAL/INDAL/HINDALCO

Anodised aluminium powder coated (minimum 50 micron thickness) door shutters, fixed type with sash bar, aluminium section weighing 0.55 kg/m including necessary joining cleats, glazing clips, rubber neoprene packing, anodized aluminium fittings such as 150mm long (4 Nos) hinges, 200mm long (2 Nos) suitable handles, 250 mm long aluminium Tower bolt (01 No), 140mm long aluminium door stopper 01 No and aluminium snap beading, screws, etc. complete all as specified and as directed. Make: JINDAL/INDAL/HINDALCO

S&F anodised aluminium window and ventilator shutters, side hung type without sash,aluminium section weighing 0.55 Kg/m including necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading screws, anodised aluminium fittings such as peg stays 150mm long (1 Nos) hinges type B-21 100mm long (2 Nos) suitable handle (1 Nos) etc. complete all as specified Make: JINDAL/INDAL/HINDALCO

Preparation of new or previously untreated wooden or wood based surfaces of any description not otherwise described over 10 cm width or girth and applying two coat of synthetic enamel paint over and including one coat of pink primer complete all as specified and directed by Engineer-in-Charge. MAKE: NEROLAC PAINTS/ JEHNSON & NICHOLSON/BERGER PAINTS/ICI DULUXE/ASIAN PAINTS

Double action floor spring hydraulically regulated made up of minimum 1.25 mm thick aluminium alloy sheet foundation box, main body with stainless steel cover, governing pivot made of brass, other parts made of mild steel heavy duty and fixed, fixed in repairs, complete all as specified and dirceted. MAKE: GODREJ/DROMA INDIA/DYANA/EVEREST

Aluminium (extruded section body) door closer hydraulically regulated, designation No. 2, universal type, suitable for door shutters of 851 to 1000 in width and of weight between 61 to 80 kg, fixed in repairs, complete all as specified and dirceted. MAKE: GODREJ/DROMA INDIA/DYANA/EVEREST

S&F brass mortice lock four levers, vetrical type size 100mm or above in old or new position fixed in repair complete all as directed by Engr-in-Charge. Make : GODREJ/HARRISON/LINK/EVEREST

M/S MA CONSTRUCTION Co

Mehar Enterprises

M/S Praveen Kumar and Sons

R B TRADERS

M/S KHUSHBOO TRADERS

SONAM TUNDUP