SPECIAL REPAIRS TO BUILDING NO P-12 (SHIP HANDLING SIMULATOR) AND ADDITION / ALTERATION TO WINDOWS AT SINGLE IN-LIVING ACCOMMODATION BUILDING NO P-21 AT LITTLE BINAGA AT NAVAL BASE KARWAR.

Amount

Dismantling of galvalume aluminium zinc coating GI based plain or corrugated steel sheets of any thickness in roofing all as specified and directed.

S&F pre- painted Galvalume Aluminium Zinc coating GI based corrugated steel sheets 0.5 mm thick of any colour having tensile strength 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws complete all as specified and directed.

S&F Pre-painted galvalume aluminium zinc coating GI based plain steel sheet 0.50mm of an colour having tensile strength of 550Mpa as in roof covering/cladding to wall, fixed with self tapping screws as specified

S&F wind ties for roof including J securing bolts, and similar work conforming to Fe 290 gde E 165 complete all as specified and directed.

S&F Rolled sections as in main and cross beams, hip and jack rafters, purlins where connected to common rafters and running rails and guides fixed with angle cleats or other connecting plates conf to Fe-410-w or E-250 quality A complete all as specified and directed.

M&L for applying two coats of synthetic enamel paint over a coat of red oxide zinc chrome primer including preparation of new steel surfaces of any description exc 10cm in width or girth complete all as specified and directed.

M&L for preparation of old painted steel surfaces of any description over 10cm width or girth and applying one coat of synthetic enamel paint including necessary scafolding and safety measures as required all as specified and directed.

Dismantling of wall and ceiling boards (fibre, pulp, insulation) or insulation boards /slab /blankets of any description and thickness including frame/grid of any description all as specified and directed

M&L for Anodised Aluminium snap grid (minimum 15 microns anodisation) of size 605 x 605 mm with anodized aluminum angle of size 40mm x 25mm x 2mm thick weighing 0.36 Kg per running meter and anodized aluminum main and cross T of size 36.50 x 23.50 x 1.50 mm thick weighing 0.254 Kg per running meter and 23.50 x 23.50 x 1.50 mm thick weighing 0.202 Kg per running meter respectively for false ceiling all as specified and directed

S&F hangers 6 mm dia. G.I. (upto 1200mm length) adjusting level fixed to roof slabs by means of ceilling cleats made out of G.I. flat 40 x 3 mm size 60mm long and expansion hold fasteners 12.5mm dia. 40mm long suitable for size of snap grid 605 x 605 mm complete all as specified and directed

M&L for 10mm thk PVC insulation panels with EPS stuck to 1mm plain PVC sheet suitably placed in false ceiling grid made of Aluminium/G.I./M.S. as per specification etc complete all as specified and directed

M&L for Vitrified ceramic tiles of premium quality, light shade, 9-10 mm thick (square/ rectangular) polished area of each tile not exceeding 0.36 Sq.m (size 600 x 600 mm), laid in floors with neat cement slurry @ 3.00 kg/Square Metre over and including 15 mm thick screed bed of cement mortar (1:4) including pointing in white cement with pigment to match the shade of tiles, complete all as specified.

M&L for vitrified coloured tiles of 600x 600 x 9-10 mm thick as in skirting set and jointed in neat cement slurry and pointed in colour cement over 10 mm thick rendering in cement mortar 1:3 including taking down old wall dado/finishes of any description, complete all as specified and directed.

Taking up or down GI tubing and connections 15mm bore including cleaning or removal to store all as specified and directed.

Taking up or down GI tubing and connections 20mm bore including cleaning or removal to store all as specified and directed.

S & F 15 mm dia UPVC pipes of pressure rating 10 Kgf/cm2 fixed to walls, ceiling or in floors etc complete all as specified and directed.

S & F 20 mm dia UPVC pipes of pressure rating 10 Kgf/cm2 fixed to walls, ceiling or in floors etc etc complete all as specified and directed.

Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing) etc complete all as specified and directed.

M&L for coloured glazed ceramic tiles (Ist quality) of size 300 x 200 x 6 to 7 mm / 300 x 450 x 6 to 7 mm thick on vertical surfaces such as skirting, dado and rises to steps etc. including 10mm thick cement plaster in CM 1:3 set and set and jointed in neat cement slurry and pointed in white or colour cement to match the colour of tiles complete all as specified and directed.

M & L for non skid ceramic coloured tiles (Ist quality) 7 to 8 mm thick (Square/ rectangular), area of each tile exc 0.06 Sqm but n.exc 0.11 sqm as in floors etc laid over and including 15mm thick screed bed in CM 1:4 and set and jointed in neat grey cement slurry and pointed in white or coloured cement to match complete all as specified and directed.

Taking down eaves gutters and SWR pipes (any size or pattern), including all fittings,heads,shoes,bends,swan-necks etcall as specified and directed.

M&L for PVC (SWR) pipe single socketed in any length with rubber ring joints laid in trenches or in floors of 110mm bore etc complete all as specified and directed.

S&F 100mm dia PVC (SWR) bend all as specified and directed

S & F PVC (SWR) floor trap of 110mm dia, plain with grating including jointing with solvent cement etc complete all as specified and directed.

S&F in repairs stop valves, cast copper alloy fancy type chromium plated with long shank and cup (concealed type) for pipe of 15mm bore of complete all as specified and directed.

S&F in reapir 20 mm dia gun- metal globe or gate valves, with iron wheel head screwed both ends for iron pipe & fixed in repair, complete all as specified and as directed.

S&F in repairs vitreous china water closet (Squatting pan) “Orissa” pattern of size 580 x 440 mm white with integral foot rest and ‘P’ trap (excluding flushing cistern) but including PVC flush pipe and provision of lime concrete bedding as fixed in repairs complete all as specified and directed.

S&F in repairs vitreous china wash down water closet (pedestal pattern) white, including fixing bolts and necessary connection with existing pipes etc complete all as specified and directed. Note : Quoted rate shall excludes the cost of flush pipe, cistern & seat cover and the same shall be paid seperately under respective item.

S&F in repair for seat cover for pedestal pan with plastic water closet seat , white, closed pattern with flat bottom and cover and mild steel chromium plated or aluminised hinging device complete all as specified and directed.

S&F in repairs for 10 litre capacity PVC valveless syphonic action type flushing cistern high or low level (exclusive of brackets) white with inlet ball valve, float and handle inlcuidng brackets complete all as specified and directed.

S&F in repairs for providing 15 mm dia PVC connection of length 450mm long complete all as specified and directed.

S&F in repairs flush pipes PVC 32mm dia for low level flushing cisten to pedestal pan, including all joints, cones, India rubber (nozzles of W.C pans) all as specified and directed.

S&F in repairs Health faucet (ABS Body) mild steel chromium plated suitable for 15mm dia pipe with 1.25m long flexible tube and ABS wall hook including making connection and fixed in positions complete all as speified and directed.

S & F in repairs two way bib cock with two lever and wall flage chromium plated brass of approved make, screwed for iron pipe 15mm boe complete all as specified and directed

S&F in repairs Wash hand basin vitreous china (flat back) size 550 x 400 mm including brackets waste brass chromium plated with long screwed shanks and fly nuts 32 mm size including bottle trap complete all as specified and directed.

S&F in repairs fancy type pillar taps cast copper alloy with capstan heads chromium plated screwed down high pressure with lettered hot or cold with long screwed shanks and fly nuts screwed for iron pipe and 15 mm bore of pipe

S&F in repairs 32mm dia PVC waste pipe for WHB and urinals fixed in repairs complete all as specified and directed.

S&F in repairs 32mm size waste fitting (coupling) brass, chromium plated for glazed ware sinks, basins, etc. with long screwed shanks and fly nuts, flange end bedded in red lead cement and other end fixed all as specified and directed.

S&F in repairs for vitreous china urinals, bowl type (back or corner wall type,) complete including providing and fixing plugs bedding urinal against wall in cement mortar in 1:2 securing urinals to plugs with and including 60 mm long brass screws, pointing around urinal back in cement , fixing automatic flushing cisterns with brackets, flush pipes, inlet ,outlet etc complete all as specified and directed as fixed in repairs.

S&F Push type taps for urinals, cast copper alloy with crutch or butterfly handle, screwed down, screwed for 15mm dia iron pipe or for brass ferrule and fixed in repairs complete all as specified.

S&F in repairs bib taps, cast copper alloy, chromium plated with crutch or butterfly handle, screwed down, screwed for iron pipe 15mm bore complete all as specified and directed.

Taking down chowkats or frames exc 1.5sqm but n.exc 4 sqm each but with shutter (without taking off shutter from the frame) complete all as specified and as directed

All as per Item No.43 here in before but not.exceeding 1.5 sqm complete all as specified and as directed.

S&F solid PVC door frame of size 50mmx 47mm made out of 5mm wood grains printed PVC sheet reinforced with MS square tube and edges painted to match with printed sheet complete all as specified and directed.

S&F factory made solid panel PVC door shutter 30 mm thick (styled) consisting of frame made out of MS tube for top & bottom rails, MS frame shall be covered with heat moulded plain colour PVC ,C" channel having a PVC sheet strip of 20mm width stuck in side with salvent cemet for stiles and plain colour PVC sheet for top rail and bottom rail, panelling of plain colour PVC sheet to be fitted in the MS frame welded/sealed to the stiles and rails with suitable PVC sheet bedding and jointed together with solvent cement suppling and fixing in the frame at site all as specified and directed.

S&F 150mm long Aluminium anodized handle of extruded sections etc complete all as specified and directed.

S&F 75 mm medium weight Mild Steel Butt hinges to the frame etc complete all as specified and directed.

S&F 150mm long aluminium anodized barrel tower bolts of extruded sections complete all as specified and directed.

S&F 300mm long aluminium alloy, anodized sliding door bolts with hasp & staple (bolt type) and fixing clips of sheet cost of extruded sections and fixing bolts and sliding bolts of extruded section or cast aluminium alloy complete all as specified and directed.

S&F for Powdwer Coated (Minimum thickness of posder coating 50 micron) aluminium frame for doors & partition, windows, ventilators with one or more rebates including joining cleat for fixing etc complete all as specified and directed.

S&F Powdwer Coated (Minimum thickness of posder coating 50 micron) Anodised aluminium door shutters, aluminium section weighing 0.55 kg/m including necessary joining cleats, glazing clips, rubber neoprene packing, handles 2 Nos in each door, hinges, anodised aluminum snap beading screws etc. complete all as specified.

S&F Powdwer Coated (Minimum thickness of posder coating 50 micron) aluminium sections for window/ventilator shutters, sliding type without sash bars, aluminium sections weighing not less than 0.55kg/m including necessary jointing cleats, glazing clips, rubber neoprene packing, aluminium snap beading, screws etc compelte all as specified and directed.

M&L for 4mm thick figured glass, pin head type and glazing exceeding 0.5 Sqm in each pane with and including beading & rubber packings fixed to aluminum/wooden shutters all as specified and directed.

S&F Anodised Aluminium grill (anodised transperent or dyed to required shade according to IS 1868 with minimum anodic coating of grade AC 15) of approved design / pattern, with approved standard section and fixed to existing frame with Cp brass stainless stell screws @ 200mm centre to centre, including cutting the grill to proper opening size for fixing and operation of handles and fixing approved anodised aluminium standard section around the opening all complete all as specified and directed.

S&F 20mm dia stainless steel curtain rod or similar articles complete all as specified and as directed by Engineer in Charge.

S&F stainless steel decorative type brackets suitable for 20mm dia curtain rod or similar articles complete all as specified and as directed by Engineer in Charge.

Demolition of stone slabs and tiles of any description or thickness in floor, approns etc laid bedded and pointed in any mortar all as specified and directed.

M & L for PCC 1:4:8 type D-2 using 40mm graded stone aggregate in foundations, filling and mass concrete complete all as specified and directed

M&L for cement concrete tiles 25CmX25CmX22 mm thick, machine pressed,(with grey cement & no pigments), set jointed and pointed in neat cement slurry in floors over and including 15 mm thick bedding layers in CM 1:6 all as specified & directed by Engg-in-charge

M&L for PCC 1:2:4 type B1 using (20 mm graded aggregate) as in kerbing all around of tile etc complete all as specified and directed.

M&L for machine pressed pre-cast concrete interlocking coloured paver block of any size and shape conforming to IS-15658-2006 of 60mm thickness M-35 grade with grey cement and pigment etc complete all as specified and directed.

M&L for stone dust or sand base filling in floors or pavings, laid in layers n exc. 15 cm thick, spread, levelled, and blinded with earth and rammed including watering etc complete all as specified and directed.

M&L for screed bed 15mm thick using WPC on concrete surfaces on roof top in CM 1:3 finished fair and smooth(without using extra cement) complete all as speified and directed.(WPC shall be measured and paid seperately)

M&L for water proofing treatment by applying oil bound bitumen primer, having a density of 0.87 - 0.89 Kg/lit, at the rate of 0.40 ltr/Sqm, providing and laying 4 mm thick APP modified water proofing membrane weighting not less than 3 Kg/Sqm of approved make including minimum 10 cm side lap and 15cm end lap, laid and pasted with blue flame torching applications and finally finishing with solar reflective bituminous aluminium paint at the rate of 0.1Kg/Sqm complete all as specified and directed.

Supply only Integral Water proofing compound complete all as specified and directed.

Taking down cement plaster on brick or concrete surfaces of wall/ceiling and likes including racking out joints, hacking for keys scrubbing down with water etc any description including removal of rubbish outside MoD land, complete all as specified and directed. Note : The rate quoted by the Contractor is deemed to be included necessary scafolding and form works.

S&F for woven chicken wire mesh to exposed top surface of slab or plasteres surfaces of slab/walls including necessary fixing materials, nails etc complete

M&L for rendering 15 mm thick in cm (1:4) on fair faces of concrete surfaces and finished even and smooth without using extra cement and mixed with waterproofing compound @3% by weight of cement including necessary scafolding and safety measures as required all as specified and directed.

M&L for rendering 10mm thick in cement mortar (1:6) on fair faces of brick work or concrete surfaces and finished even and smooth without using extra cement including necessary scafolding and safety measures as required etc complete all as specified and directed.

M&L for preparation of new plastered / decorated wall surfaces applying two coats of Acrylic Emulsion exterior grade, weather proof antifungal Paint over a coat of primer including necessary scafolding and safety measures as required etc complete all as specified and as directed by Engr-in-Charge.

M&L for preparation of new plastered / decorated wall surfaces including appyling two coat of Acrylic washable distemper over a coat of alkaline resistant primer including necessary scafolding and safety measures as required etc complete all as specified and as directed by Engr-in-Charge.

M&L for preparation of old plastered / decorated wall surfaces including complete removal of existing treatment by brooming down or steel wire brushing, scrapping down smoke soot, moulds, moss and efflorescent salts and trading oil and greasy spots etc complete and applying two coat of Acrylic washable distemper over a coat of alkaline resistant primer including necessary scafolding and safety measures as required etc complete all as specified and as directed by Engr-in-Charge.

M&L for applying 1mm thick wall care putty on plastered/unplastered surfaces of wall/ceiling etc complete all as specified and directed.

M&L for preparation of old plastered / decorated wall surfaces including complete removal of existing treatment by brooming down or steel wire brushing, scrapping down smoke soot, moulds, moss and efflorescent salts and trading oil and greasy spots etc complete and applying two coat of Acrylic Emulsion exterior grade, weather proof antifungal Paint over a coat of primer including necessary scafolding and safety measures as required etc complete all as specified and as directed by Engr-in-Charge.

M&L for preparation of old painted wooden surfaces of any description not otherwise described over 10cm width or girth and applying one coat of synthetic enamel paint including necessary scafolding and safety measures as required all as specified and directed.

Excavating in post holes (or similar holes) each n exc 0.5 cu. m, in hard / dense soil and getting out, returning, filling in and ramming earth or broken rubble mixed with earth around, in layers not exceeding 25 cm etc complete all as specified and directed.

M&L for PCC (1:3:6), type-C2 using 40 mm graded stone aggregate as in foundation filling and mass concrete all as specified and directed.

M&L for Hand rails, half round or other steel section or core for wooden hand-rail straight portion, drilled and countersunk for balusters running bars, for doors, balusters, nosing to steps including embeding in concrete and screwing etc. wind ties for roof including securing bolts; posts and struts in fencing including cutting tops to shape as directed, drilling holes, notching for wire, etc.; flat iron fillets (for securing wire mesh etc.) including all necessary drilling, bolting or riveting, etc., and similar work conforming to Fe-290 Gde E-165 etc complete all as specified and directed.

Supply only Chain link MS galvanisd fencing, any size or type

Fixing only chain link fencing including line wires, any mesh, size and type to any type of standards, rails, straining bolts, etc. including provission of binding wire all as specified and directed.

S&F MS flat fixed to Post/Vertical members including securing bolts for chain link fencing etc complete all as specified and directed.

S&F for mild steel round bars 10mm dia and over for securing chain link fencing cut to length bent to shape required including bolting etc complete confirming to FE 290 Gde E-165 all as specified and directed

S&F Mild steel bolts of dia not exceeding 12mm purpose made. with hexagonal or square head one end and screwed the other, or screwed both ends; each screwed end to be fitted with washers and one hexagonal or square nut. Exc 30cm long etc complete all as specified and directed

Removing excavated materials n exc 50m and depositing where directed at alevel n exc 1.5m above the starting point complete all as specified and directed

M & L for Framed work as in doors or gates of angle or other section with gusset plates, rails, braces, etc., complete, drilled for fixing of steel sheeting or other covering. Doors, etc. to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings (exclusive of steel sheeting or other covering, running rails and guides) and hanging; also fastening and fixing confirming to Fe 410 -W (Gde- E- 250) quality-A complete all as specified and directed.

M & L for providing and injecting emulsion for post construction antitermite treatment at points of contacts of wood with masonry / concrete surfaces using chemical emulsion mixed with oil or kerosine at the rate of 0.5 litres per hole including drilling 6mm dia holes at a downward angle of 45 degree at 150mm centre to centre and plugging the holes with cement mortar (1:2) etc to match with existing surface complete all as specified and directed.

S&F 1-3mm thk Plain Electrical Insulating Mats to be laid on floor & welded at junctions etc complete all as specified and directed

S & F Neoprene/ EPDM rubber gasket for aluminium window, door & partitions complete all as specified and directed.

S&F for Providing and fixing Powder coated aluminium (minimum thickness of powder coating 50 micron) for Frame & shutters of doors, windows & ventilators including providing and fixing hinges/ pivots and making provision for fixing of fittings wherever required including the cost of EPDM rubber/ neoprene gasket required (Fittings shall be paid for separately) with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS: 733 and IS:1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing/ paneling, C.P. brass/ stainless steel screws etc compelte all as specified and directed.

S&F 4.0 mm thick Sheet glass ordinary quality and glazing with oil putty in square not exc 0.5 sq. m in each pane fixed to Aluminium windows/ventilator etc complete all as specified and directed.

S&F Stainless steel wire cloth. 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples complete all as specified and as directed

M&L for providing precast cement concrete block masonary with solid blocks exc 10 cm width, type C-1 (1:3:6) using 20mm graded aggregate and set in cement mortar (1:4) all as specified and directed.

M&L for preparation of new plastered / decorated wall surfaces including appyling a coat of 1mm thk wall care putty on new surfaces and applying two coat of Acrylic washable distemper over a coat of alkaline resistant primer including necessary scafolding and safety measures as required etc complete all as specified and as directed by Engr-in-Charge.

M&L for preparation of old plastered / decorated wall surfaces by brooming down or steel wire brushing, scrapping down smoke soot, moulds, moss and efflorescent salts and trading oil and greasy spots etc and appyling one coat of Oil Bound Distemper including necessary scafolding and safety measures as required as specified and as directed by Engr-in-Charge.

S&F MS 1.00 mm thick MS plain black sheet in steel gates and similar work, cut to size, holes punched, including round headed screws and fixed to wood or steel framing with plain 40mm lap joints with riveted or welded as required.

S&F Factory made single extruded WPC (Wood Polymer Composite) solid door/ window/ Ceosetory windows & other Frames/ Chowkhat of size 45 x 70 mm comprising of virgin PVC polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/ wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) fabricated with miter joints after applying PVC solvent cement and screwed with full body threaded star headed SS screws having minimum frame density of 750 kg/cum, screw withdrawal strength of 2200 N (Face) & 1100 N (Edge), minimum compressive strength of 58 N/mm2, modules of elasticity 900 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/ moisture proof and fire retardant and fixed in position with MS hold fast/ lugs/SS dash fasteners of required dia and length complete as per direction of Engineer-in-Charge. complete all as specified.

S&F Factory Made Solid PVC Moulded Door Shutter with particle board core, 28 to 30mm thick (stiles), with 2, 4, or 6 raised panel design with 2mm thick Moulded PVC Sheet on the front face & 2mm plain colour PVC sheet on back face, supplying & fixing in frame at site as per specification etc complete all as specified and directed.

S&F 75mm Butt hinges, heavy weight, cold rolled mild steel, and fixed etc complete all as specified and directed.

S&F extruded brass barrel tower bolts with cast or sheet barrel and rolled or cast bolts 150mm long all as specifed and directed.

S&F extruded brass handles, fabricated type 125mm size all as specified and directed.

S&F Brass, sliding door bolt with and or die-cast brass hasp, staple (bolt type) and fixing bolt with rolled or drawn brass bolts and fixed 300 mm long complete all as specified and directed.

Taking down copper/aluminium point wiring (light, fan, socket or power) complete, including fixture and fittings such as switches, ceiling roses, pendants, regulators, sockets, light fitting etc. removing materials to store for keeping in safe custody or for taking credit (credit for above items should be made as per conditions separately) and making good disturbed surfaces of walls, floors, etc.

M&L for point wiring with 1.5 Sqmm PVC (FRLS) insulated sheathed multi stranded copper conductor cable 1100 volts grade single core conforming to IS-694-1990 and including one run of continous earth wire to common earth and connected to earth with 1.5 Sqmm PVC (FRLS) insulated sheathed multi stranded copper conductor cable draw in conduit including CI/MS/PVC sunk boxes for mounting switches, sockets, regulators etc with 3 mm thick plastic laminated sheet cover of adequate size for one light/fan/bell point controlled by one switch and making good disturbed surfaces with CM (1:4) to match with the existing surface complete all as specified and directed by Engr-in-Charge.

Ditto as per item No 2 above but for 2 in 1 , 3 pin switch socket outlet 5 Amp on same board with other switches, complete all as specified.

Ditto as per item No 2 above but for 2 in 1 , 3 pin switch socket outlet 5 Amp on independent board complete all as specified.

M&L for point wiring with 2.5 Sqmm PVC (FRLS) insulated sheathed multi stranded copper conductor cable 1100 volts grade single core conforming to IS-694-1990 and including one run of continous earth wire to common earth and connected to earth with 2.5 Sqmm PVC (FRLS) insulated sheathed multi stranded copper conductor cable draw in conduit including CI/MS/PVC sunk boxes for mounting switches, sockets, regulators etc with 3 mm thick plastic laminated sheet cover of adequate size for 3 pin switch socket outlet 15/20 Amp on independent board and making good disturbed surfaces with CM (1:4) to match with the existing surface complete all as specified and directed by Engr-in-Charge.

M&L for point wiring with 4 Sqmm PVC (FRLS) insulated sheathed multi stranded copper conductor cable 1100 volts grade single core conforming to IS-694-1990 and including one run of continous earth wire to common earth and connected to earth with 4 Sqmm PVC (FRLS) insulated sheathed multi stranded copper conductor cable draw in conduit including CI/MS/PVC sunk boxes for mounting switches, sockets, regulators etc with 3 mm thick plastic laminated sheet cover of adequate size for 3 pin switch socket outlet 15/20 Amp on independent board and making good disturbed surfaces with CM (1:4) to match with the existing surface complete all as specified and directed by Engr-in-Charge.

Supply and fix in repair Socket outlet 3 pin, 5A, flush type, ISI marked, all as specified and directed.

Supply and fix in repair Switch piano, flush type single pole, one way 5 Amp, ISI marked, all as specified and directed.

Supply and fix in repair switch socket combination 3 pin16 Amp, 5 in 1 flush type, ISI marked, all as specified and directed.

Supply and fix in repairs Integral sleek CRCA housing box type luminaire suitable for ONE T8 LED tube light with white acrylic cover suitable for upto 1x20 watts LED tube light. Make Bajaj Cat No. BLRB-DB 118 or equivalent in Havells/CG

Supply and fix in repairs LED tube rod 20 Watt, 6500 K, 1200 mm long complete all as specified and directed. Make : Make Bajaj Cat No. BLRB 20W CW LED or equivalent make in Havells/Crompton Greaves

Supply and fixing in repair round shape 15 watt 220 volts AC recessed type with high efficiency PMMA diffuser soft glare free light complete with drivers, holders, LED lamp suitable for roof ceiling including connecting up with three core flexible copper conductor cable of suitable size complete all as specified and directed.

Supply and fixing in repair LED luminaire 600 mm x 600 mm, 35/36 watt, 220 V AC recessed type with high efficiency PMMA diffuser soft glare free light complete with driver, holders & LED lamp suitable for roof ceiling including connecting up with driver three core flexible copper conductor cases of suitable size complete all as specified and directed.

Supply and fixing in repair LED street light fitting 60 Watt 230 V AC outdoor type with high pressure die cast aluminum hosing and heat resistant complete with driver, lamp bracket with impact and corrosion resistant including thermal management in multiple optics complete with IP 65/66 protection complete.

Supply & fix in repair single pole and neutral enclosure with a two pin and earth plug and socket complete with one double pole MCB 240 volts 20 Amps all as specified and directed.

Taking down sub main wiring without PVC-conduits/casing fixed/concealed in walls and making good to the disturbed surfaces of walls/floors etc. of any size all as specified and directed Engr in Charge

Earthing complete with galvanised steel earth plate electrode 60×60cm.× 6mm thick, buried directly in ground (earth pit not less than 2.25 metres deep below ground level) with top edge of the plate not less'than 1.5 metres below normal ground level, connected to galvanised earth lead wire 4.0mm dia by means of bolts, nuts, check nuts and washers of galvanised iron or steel all as shown in electrical plate No. 3 connected to earthing tes point all as specified or indicated including testing on completion

Supply & Fix in repair MCCB of rating 100 A 415V,16KA breaking capacity, 4 Pole complete all as specified and directed.

Supply and fixing in repair sheet metal enclosure MCB DB SPN 8 ways double door type with suitable bus bar complete all as specified and directed.

Supply and fixing in repair sheet metal enclosure MCB DB TPN 4 ways double door type with suitable bus bar complete all as specified and directed.

Supply and fixing in repair MCB SP single pole 'C' series 6 to 32 Amps 230 volts 10 KA rupturing capacity complete all as specified.

Supply and fixing in repair MCB SPN 32 AMP 'C' series 230 volts 10 KA rupturing capacity complete with connection testing and commissioning.

Supply and fixing in repair 415 V 10 KA 'C' curve MCB of TPN 40 to 63 Amp current carrying capacity in the DB complete with connection testing and commisioning.

M&L for submain wiring with PVC insulated sheathed copper conductor FRLS multi stranded, single core 1100V grade 2x4.0 sqmm complete drawn in and includindg medium grade rigid non-metallic PVC conduit and its accessories along with 1x 4.00 sqmm PVC insulated sheathed copper conductor multi sranded single core copper cable for continuous earth wire and duly connected to common earth all as specified and directed Engr in Charge.

AKSAISHA ENGINEERING

KVL CONSTRUCTION

KOTIAN -ECC

ABDUL RAHIM