Construction of Two Class Room School Buliding PUES in Mettu kunnathur At Kunnathur Panchayat in Sholinghur,Ranipet Dist.

Amount

Construction of Two Class Room School Buliding PUES in Mettu kunnathur At Kunnathur Panchayat,Sholinghur Union in Ranipet District

Earth work excavation and depositing on bank with initial lead and lift in all soil

Supplying and Filling M sand in Layers in Foundation and Basement including all Cost and Conveyance

Plain Cement Concrete 1:4:8, using 40 mm Metal Including all Cost and Conveyance and all Labour Charges

Refilling the approved good quality earth in plinths, area development etc. wherever specified in layers is not exceeding 200 mm thick, with available earth at site.

Supplying and filling of good earth filling locally available earth transported from the outside including consolidation, leveling specified in layers of not exceeding 200 mm thick., etc. complete.

Supplying and Errecting Centering and Shuttering including Necessary Support

Footing, Plinth Beam

Column Upto Basement

Column Above Basement

Plain surfaces such as roof slab, floor slab, beams, lintels, loft, sill slab, staircase waist, portico slab and other similar works.

RCC 1:1.5:3 mix Using 20 mm Metal including all Cost and Conveyance

Foundation and Basement

Ground Floor

Supplying and Fabrication and Placing of Steel Including all Labour Charges

Brick Work in CM 1:5 using Best Quality II Class Table Moulded Bricks Including all Cost and Conveyane

Foundation and Basement

Ground Floor

Brick Partition Wall 11.50 cm Thickness Using Best Quality II Class Table Moulded Bricks including all Cost and Conveyance

Ground Floor

Plastering Work

Supplying and painting the walls with two coats of wall putty as instructed by the departmental officers including preparation of surface curing, etc., complete in all floors complying with standard specifications (The wall putty shall be got approved by the Executive Engineer before use of work).

Cement Plastering With CM 1:5,12 mm thick Including all Cost

Cement Plastering With CM 1:5,12 mm thick Including all Cost

Flooring and Dadooing

Paving the floor with best approved quality fine polished Kota stone slabs of size 600 x 600 of 18 / 20mm with machine cut edges and matching marble slab not less than 100mm width other than Adanga Marbles as border laid over a cement mortar bed

Providing Granolithic Floor Finish With PCC 1:2:4 including all Cost.

Providing, fabricating and fixing M.S. grills Windows, and ventilator, gates, ladders, rail pipes, nosing angles, with M.S.lugs in staircase steps etc., made out of M.S rods, flats, angles, pipes, channels etc. including necessary fixtures complete as per drawings and specifications and as directed by the Engineer.

Fabricating, Supplying and Fixing in Position of Steel Sheeted Windows (Two Leaves) including all Cost

Manufacturing and Supplying and Fixing of Steel Doors With Specfication

Painting Work

Ceiling Painting with Two Coats of Distempering one Coat of Distemper Primer

Painting New Plastered Internal wall Surface with two cots of Distempering

Supplying and painting the walls with one coat of wall primer and two coats of Exterior emulsion (apex or equivalent) as instructed by the departmental officers including preparation of surface curing, etc.

Paving the Top of roof with Solar reflective ceramic tiles of size 305 x 305 x 7mm thick of approved quality and colour laid in Cement mortar 1:3 (One cement and three M.Sand) 12mm thick and pointed with tile grout (Nitotile Grout or equivalent) and cement in the ratio of 1:3 for joint, curing etc., complete complying with standard specification and as directed by the departmental officers. (The make and brand of the tiles should be got approved by the Executive Engineer before use on works)

Painting new Iron Works such as Steel Doors and Windows

Supplying and Fixing Cuddapah Slab for Cupbord Shelf

Providing Cup-board Shutter with frame using termite / water proof plywood of 19mm thick over which laminated sheet of 0.8mm thick fixed inside the shutter and 1mm thick fixed in the outside of the shutter using fevicol along with necessary furniture fittings

Cement Concrete 1:2:4 using 20 mm and 12 mm metal including all Cost and Conveyance and all labour charges

Electrification

Wiring 2 x 1.5 sq.mm (22/0.30)PVC insulated unsheathed SC.cu.conductor of 1100 V grade in suitable PVC rigid pipe on wall and ceiling with PVC accessories with TW switch box with in flush with wall covered with hylem sheet of 3 mm thick with painting of suitable colour for concealed PVC light/ fan point (SD No.25)

Supply and fixing of 4'-20W LED tube with fitting inclusive of all charges

Wiring 2 x 1.5 sq.mm (22/0.30)PVC insulated unsheathed SC.cu. conductor of 1100 V grade in suitable PVC rigid pipe on wall and ceiling with PVC accessories with TW switch box with in flush with wall covered with hylem sheet of 3 mm thick with painting of suitable colour for concealed PVC plug point (SD No.38) 5 pin plug point

supply and fixing of 1200mm sweep AC ceiling fan complete with stepped electronic regulator with 300mm down rod on the existing clamp SD 106

Supply and fixing of water tight Bulk Head fitting with guard (Philips / Bajaj / Crompton / Klite) suitable for incandencent lamp and 60W bulb (SD N0.83)

Supply and run of 2 of 1.50 Sq.mm polythene insulated PVC sheathed heavy duty SC Copper conductor of 1100 V grade on 7/20 GI bearer wire for service connection mains (SD No.64)

Supply and fixing of TNEB meter Board suitable for 32A Single Phase service connection with 32A Fuse unit (500V) 32A neutral link and earth link (1" x 1/8" Copper flat) on TW plank of size 375mm x 300mm x 19mm with supporting TW reepers of 1" thick an either side with painting with suitable bolt and nuts for fixing the TW plank on wall with earth connection and inter connection with 7/20 PVC insulated copper wire from EB meter to fuse unit. (SD No. 125)

Supply and run of 2x4 sqmm (22/0.3) PVC insulated SC unsheathed Cu.Conductor of 1100V grade in 25mm dia GI pipe (Class 'B') suitably bent at both ends with necessary angle iron upright and end supports for mains SD 70

Supply and Fixing of 16 Amps DP Switch of 500V with Metal Clad with Fuse and Neutral SD 142

GST Amount for providing Service to Government Contract Works for the above Construction & Maintenance Works.

B.Vinothkumar (BID ID -1386791)