Loading…
India Infra Updates on WhatsApp
Join the Tenderkart WhatsApp channel for India Tender Updates
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹23.1 LAccepted-AOC THERGAON PUNE | THERGAON | PUNE | MAHARASHTRA | L1 | Accepted-AOC lowest tenderer | |
| 2 | L2₹24.2 L+₹93,600 (4.03%)Rejected-Finance FLAT NO 401 TULSANI HEIGHTS 4TH FLOOR GREEN PARK SOCIETY AKURDI GURUDWARA TO WALHEKAR WADI ROAD CHINCHWAD PUNE 411033 | PUNE | MAHARASHTRA | 411033 | L2 | Rejected-Finance GREATER THAN L1 | |
| 3 | L3₹25.5 L+₹2.2 L (9.65%)Rejected-Finance HOUSE NO 11 VILLAGE POST SAIGAON THE BHALKI DIST BIDAR STATE KARNATAKA 585416 | BIDAR | KARNATAKA | 585416 | L3 | Rejected-Finance GREATER THAN L1 |
Tender Value
₹29.8 L
EMD Value
₹60,000
Closing Date
4 Aug 2023, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
P Bangar Raju,IDSE
GE (I) (NAVY), INS SHIVAJI - POST, LONAVLA -410402
REPAIRS TO ROAD AND ROAD FURNITURE AT CERTAIN OTM AREAS UNDER AGE B/R-I AT INS SHIVAJI LONAVLA
2023_MES_608403_1
GE/LONAVLA/8159/E8
Open Tender
Civil Works
Item Rate
270 days
GE (I) (NAVY) LONAVLA
As per NIT /Tender documents
6 documents required · 6 mandatory
₹500
Yes
GEINDEPNAVYLONAVLA
₹60,000
Yes
12 Oct 2023
8 Jul 2023
7 Aug 2023
8 Jul 2023
4 Aug 2023
22 Jul 2023
8 Jul 2023 - 21 Jul 2023
Amount
Manufacturing, supplying and fixing in repair retro reflective Cautionary /warning sign boards of equilateral triangular /circle /rectangle /square shape having each side of 900 mm with support length of 3650 mm and made up of 2 mm thick aluminium sheet, face to be fully covered with high intensity encapsulated type heat activated retro reflective sheeting conforming to type - IV of ASTM-D 4956-01 in blue and silver white or other colour combination including subject matter, message (bi-lingual), symbols and borders etc. as per IRC ; 67:2001, pasted on substrate by an adhesive backing which shall be activated by applying heat and pressure conforming to class -2 of ASTM-D-4956-01 and fixing the same with suitable sized aluminium alloy rivets @ 20 cm c/c to back support frame of M.S. angle iron of size 25x25x3 mm along with theft resistant measures, mounted and fixed with 2 Nos. M.S. angles of size 35x35x5 mm to a vertical post made up to M.S. Tee section ISMT 50x50x6 mm welded with base plate of size 100x100x5 mm at the bottom end and including making holes in pipes, angles flats, providing & fixing M.S. message plate of required size, steel work to be painted with two or more coats of synthetic enamel paint of required shade and of approved brand & manufacture over priming coat of zinc chromate yellow primer (vertical MS-Tee support to be painted in black and white colours).Backside of aluminium sheet to be painted with two or more coats of epoxy paint over and including appropriate priming coat including all leads and lifts etc. complete as per drawing , specification and direction of Engineer-in-charge.
Supply and fixing in repair metal tubular dealineator made out of ABS round body fitted with 2 Nos 65 mm dia highly reflective reflectors made out of PMMA and mounted on 45/50 mm dia mild steel pipe of 600 mm height duly powder coated and thermo plastic elastomer 3 bands of green, red and yellow reflector radium tape of 25 mm wide strips with anti theft steel net for reflector protection including embedding in PCC 1:2:4 (150x150x300mm) type B1 complete all as specified and directed
Supply and fix in repair solar cat eye aluminum alloy shall (100% water proofing design according to 65) of size 125mm x 125mm x 25mm (shank 65mm) of high efficiency Mono rystafie solar panel 2.4V/ 0.3 watt one NI-ed rechargeable battery (1.2V/ 1600MA) consisting of super bright LED with 10,000 to 18,000 mcd completed as per manufactures instructions etc. all as specified and directed
S&F in repair Undirectional reflective pavement marker (RPM) or Cats eye (road stud), white/red colour, high intensity ABS Plastic road stud moulded from ASA (Acrylic styrene Acrylonitrate) or (HIPS) High impact polysterene of size varying from 100x100x20mm to 110 x 90x17mm and colour of body amber, red or white, two way reflective 180 degree and fixing of stud with approved high intensity thermoplast adhesive bond & nailing the same on specified section of the road with MS anodised pin of standard pattern of manufacturers 8 x 37 mm long including cutting making holes on road for proper fixing of the same complete all as specified and as directed. Make : 3M (290 series)/Dark eye. Notes: (i) The RPM or road studs shall be tested in accordance with ASTM D 4280. (ii) The road studs shall conform to the Technical speciofications of NHAI (clause No A-8).
M&L for preparing of new or previously treated road surface and painting lines, dashes, arrows letters etc on road pavements and the like 10cm wide with road marking paint 2.5 mm thick mechnically with white or golden yellow paint including reflecting beads at 250 gms per sqm of surface area and including removal of old loose paint by burning /scraping method complete all as specified and directed. Notes:-(i) The thickness 2.5 mm mentioned above is exclusive of the thickness of glass beads as per IRC:35. (ii) The finished surface shall be in uniform level and free from streaks and holes.
M&L for premix bituminous, macadam laid, rolled & compacted to required camber & gradient using power roller of 8 to 10 ton capacity (consolidated thickness 75mm or less) & the binder content (VG 30 bitumen) should not be less than 4% by weight of total mix complete all as specified and as directed.
M&L for applying evenly a priming / tack coat with bituminous primer @ 5 Kg per 10 Sqm.
M&L for laying bituminous premix asphaltic semi dense concrete 40mm consolidated thickness with 5.5% binder content by weight of total mix, using VG 30 bitumen by mechanised paver) rolled and compacted to required camber and gradient with 8 to 10 ton power roller over and including preparing existing black top surfaces by brushing with wire brushes for removing caked mud etc sweeping with brooms and finally fanning the cleaned surfaces with gunny bags to remove all loose dirt etc and applying evenly a priing /tack coat with paving bituminous primer @ 5 Kg/10 Sqm complete all as specified and as directed.
Excavation in trenches n.exc 1.5m wide and n.exc 1.5m in depth; for foundation , etc or for shafts, wells, cesspits, manholes, pair holes, etc n.exc 10 Sqm on plan and n.exc 1.5 in depth and getting out in hard/dense soil.
Demolition of cement concrete (unreinforced) in ground floors and pavings n exc 15 cm thickness (below or above ground level)
PCC (1:4:8) type D2 (using 40 mm graded stone aggtegate) as in foundation filling and mass concrete
M&L for pre cast Machine pressed cement concrete 1:2:4 type B-1 (using 20mm graded stone aggregate) as in kerbs stones and fixing all as per manufacturer instructions etc size shall be decided and directed by GE
S&F in repairs Metal Beam Crash Barrier-- Type-A,W : Metal Beam Crash Barrier (Providing and eracting a W 'metal beam crash barrier comprising of 3mm thick corrugated sheet metal beam rail, 70cm above road/ground level, fixed on ISMC series channel vertical post, 150x75x5mm spaced 2m centre to centre, 1.8m hight 1.1m below ground/road level, all steel parts and fitments to be galvanised by hot dip process, all fittings to conform to IS 1367 and IS: 1364, metal beam rail to be fixed on the vertical post with a spacer of channel section 150x75x5mm , 330mm long complete as per clause 810 of MORTH Latest edition.)
SHAILENDRA B TULSANI
JADHAV CONSTRUCTION AND INFRASTRUCTURE
stage.html
html • 0.05 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .