Loading…
India Infra Updates on WhatsApp
Join the Tenderkart WhatsApp channel for India Tender Updates
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹69.3 LAccepted-AOC | L1 | Accepted-AOC Being L1 | |
| 2 | L2₹71.6 L+₹2.3 L (3.26%)Rejected-Finance BANPURA BATWARA SRINAGAR 190004 J K | SRINAGAR | SRINAGAR | JAMMU AND KASHMIR | 190004 | L2 | Rejected-Finance Not being L1 | |
| 3 | L3₹74.6 L+₹5.2 L (7.57%)Rejected-Finance | L3 | Rejected-Finance Not being L1 | |
| 4 | L4₹74.6 L+₹5.3 L (7.58%)Rejected-Finance RAILWAY COLONY NOWGAM SRINAGAR JAMMU AND KASHMIR 190015 | BUDGAM | JAMMU AND KASHMIR | 190015 | L4 | Rejected-Finance Not being L1 |
Tender Value
₹69.6 L
EMD Value
₹1.3 L
Closing Date
12 Oct 2023, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
CWE, HQ 133 WORKS ENGRS
HQ 133 WORKS ENGRS
SPL REPAIR TO INTERNAL EXISTING ROAD AT VARIOUS LOCATIONS UNDER GE 969 EWS
2023_MES_615805_1
CWEK-33/2023-24
Open Tender
Civil Works - Roads
Item Rate
270 days
GE 969 EWS
Class C Category a v
7 documents required · 7 mandatory
₹1,000
GE 969 EWS
₹1.3 L
HQ 133 WORKS ENGRS
28 Dec 2023
25 Aug 2023
20 Oct 2023
25 Aug 2023
12 Oct 2023
29 Sept 2023
25 Aug 2023 - 8 Sept 2023
9 Sept 2023
Amount
Repair to potholes any depth, not exc 1 sq m each including sweeping free from dust and mud, or water, scoring sunken surfaces in roads, paths, etc. cutting around edges to at least 25mm in depth, making good by applying tack coat @ 5 kg per 10 sq m and putting in premixed bituminous macadam, well rammed and sealed with binder 9.8 kg per 10 sq m, binded with 0.09 cu m of stone chippings, 6.3 mm size for depth of potholes exc 30 mm and again well rammed and sealed with premixed sand seal coat (including supply of premixed macadam, binder and chippings) rolled and compacted to required camber and gradient with 8 to 12 tonne power roller, complete all as specified and as directed by Engr-in-Charge.
Material and labour for preparation of old black top road surface & WMM-WBM Surface by brushing with wire brushes for removing caked mud etc. sweeping with brooms and finally fanning the cleaned surfaces with air compressor to remove all loose dirt etc, complete all as specified and as directed by Engr-in-Charge.
Material and labour for laying bituminous premix semi dense asphaltic concrete 25mm (consolidated thickness) using with 5.5% of binder (grade VG-30) content by weight of total mix, rolled and compacted to required camber and gradient using mechanical paver and rolled with 8 to 12 tonne capacity power road roller rolled to uniform smooth surface ,complete all as specified and as directed. Note- (i) Bituminous premix semi dense asphaltic concrete shall prepared in central computerised hot mix plant. complete all as specified and as directed by the Engineer-in-Charge. (ii) Design mix shall be got done by the contractor at his own expenses from laboratory as decided by GE complete all as specified and as directed by Engr-in-Charge.
Material and labour for laying bituminous premix semi dense asphaltic concrete 30mm (consolidated thickness) using with 5.5% of binder (grade VG-30) content by weight of total mix, rolled and compacted to required camber and gradient using mechanical paver and rolled with 8 to 12 tonne capacity power road roller rolled to uniform smooth surface ,complete all as specified and as directed. Note- (i) Bituminous premix semi dense asphaltic concrete shall prepared in central computerised hot mix plant. complete all as specified and as directed by the Engineer-in-Charge. (ii) Design mix shall be got done by the contractor at his own expenses from laboratory as decided by GE complete all as specified and as directed by Engr-in-Charge.
Material and labour for laying bituminous premix semi dense asphaltic concrete 40mm (consolidated thickness) using with 5.5% of binder (grade VG-30) content by weight of total mix, rolled and compacted to required camber and gradient using mechanical paver and rolled with 8 to 12 tonne capacity power road roller rolled to uniform smooth surface ,complete all as specified and as directed. Note- (i) Bituminous premix semi dense asphaltic concrete shall prepared in central computerised hot mix plant. complete all as specified and as directed by the Engineer-in-Charge. (ii) Design mix shall be got done by the contractor at his own expenses from laboratory as decided by GE complete all as specified and as directed by Engr-in-Charge.
M&L applying evently a priming/tack coat with bituminous primer usingpaving bitumen og grade VG10@ 3Kg/10 Sqm on bituminous macadam surfaces incl preparation complete all as specified and as directed by Engr-in-Charge.
M&L applying evently a priming/tack coat with bituminous primer usingpaving bitumen og grade VG10@ 5Kg/10 Sqm on existing black top for below bituminous macadam surfaces incl preparation complete all as specified.
M&L applying evently a priming/tack coat with bituminous primer usingpaving bitumen og grade VG10@ 10Kg/10 Sqm on WMM/WBM surfaces incl preparation complete all as specified and as directed by Engr-in-Charge.
Material and Labour for premixed bituminous macadam (consolidated thickness 75mm or less ) laid / rolled and compacted to required gradient and camber and gradiant using mechanical paver and rolled with 8 to 12 Tonne capacity power road roller to uniform smooth surface using binder content of 4% by weight of total mix using paving bitumen of grade (VG-30) complete all as specified and as directed Note- (i) Bituminous macadam shall prepared in central computerised hot mix plant. complete all as specified and as directed by the Engineer-in-Charge. (ii) Design mix shall be got done by the contractor at his own expenses from laboratory as decided by GE complete all as specified and as directed by Engr-in-Charge.
M&L for preparing bituminous surfaces of road and marking 2.5mm thick centre lines, stop lines, dashes, arrows etc. and the like n. exc 10 cm wide on roads pavements with hot applied thermo plastic road marking paint of approved colour confirming to BS 3262-1989 with special applicator machine all as per manufacturers instruction complete all as specified and as directed by Engr-in-Charge.
M & L for scarifying or picking gravelled, macadam or bituminous macadam surfaces in area exc 400 sq m in area not exc400 sqm, Exc 50 mm and n exc 100 mm deep, complete all as specified and as directed.
M & L for 150 cm thick (compacted thickness in two layers) of 75 mm each WBM with coarse aggregates of grading 2 (63 to 40 mm size ), spread, rolled and consolidated to camber required, Type of aggregate lime stone, sand stone , complete all as specified and as directed by Engr-in-Charge.
M&L for laying and compacting 150mm thick (Compacted thickness) Wet mix Macadum (WMM) laid in two layers of 75mm each grading as per Table 400-13 of of MoRTH specification for Road and Bridge works 2013, manufacture in WMM plant, material comprising of clean, srushed, graded aggregate and granular material premixed with water to a dense mass spreading wih sensor paver and rollling with vibratory roller of capacity 80-100KN static weight and consolidating to required gradient and camber complete all as specified and directed. The finished surface tolerance to be as per Table 900-1 of MoRTH specification for Road and Bridge works 2013 complete all as specified and as directed by Engr-in-Charge.
All per Ser item No 10 here-in-before but except material and in one layter of 7.5 cm thick (Consolidated thickness), complete all as specified and as directed by Engr-in-Charge.
M & L for marking lines/strips on roads/pavement with thermo plastic paint (tint as approved by GE) by hot mixing method as per IS specification, heating with gas, to achieve minimum uniform thickness 1.5 mm using painting materials @ 6.5 Kg/Sqm and glass beads @ 250 gm/Sqm complete all as specified and as directed by Engr-in-Charge.
Supply and fixing cat eye solar reflective type of metal body alloy of size 100mm x 100mm x20mm with PAMA striplens reflector of model No.DA 972.0 fixed with and incl MS stud of suitable size as per manufactures instructions complete all as specified and as directed by Engr-in-Charge.
Supply and fixing Solar Cat eye aluminum alloy shall (100% water proofing design cording to 65) of size 125x125x25 mm, (Shank 65 mm) of high efficiency Mono rystafie solar panel 2.4V/0.3 wall one NI-ed rechargeable battery (1.2V/1600MA) consisting ofg super bright LED with 10,000 to 18,000 med completed as per manufactures instructions etc all as specified and directed complete all as specified and as directed by Engr-in-Charge.
Supplying and fixing metal tubular dealineator made out of ABS round body fitted with 2 Nos 65 mm dia highly reflective reflectors made out of PMMA and mounted on 45/50 mm dia mild steel pipe of 600 mm height duly powder coated and thermo plastic elastomer 3 bands of green, red and yellow reflector radium tape of 25 mm wide strips with anti theft steel net for reflector protection including embendding in PCC 1:2:4 (150x150x300mm) type B1, complete all as specified and as directed by Engr-in-Charge.
Rolling and consolidating forming surface for WBM/WMM with 8 to 10 tonne power roller, including filling in soft sports, depressions etc which occer during rolling for portion coming in cutting/original ground to required camber and gradient etc including watering before or during rolling, complete all as specified and as directed by Engr-in-Charge.
16 Supplying and fixing retro reflective signage boards made up of 2mm thick aluminium shaeet face to be fully covered with high intensity Prismatic a (Type-IV) sheeting confirming to Type III of ASTM_D-4956-01 as approved by Engineer-in-Charge letters, boarders etc, as er IRC:67-2012 (3rd Rvision) in silver white with blue/green colour back ground and with high intensity grade, pasted on substrate by pressure senstitive adhesive backing which shall be activate by applying pressure confirming to class IIASTM-D-1956-01 and fixing the same with 50 mm dia stainless steel tubular section of 304 Grade, revets or bolts and nuts in suitable height. colst of excavation of post holes, erecting with PCC 1:2:4, stainless steel (for post and frame) in all position complete as per drawings directed of Engineer -in-Charge deemed to be included in this item complete all as specified and as directed by Engr-in-Charge.
Moorum filling in floors or pavings laid in layers n.exc 15 cm thick spread levelled and rammed incl watering as in road berms complete all as specified and as directed by Engr-in-Charge.
M/S SUHEEL CONSTRUCTIONS
SHALIMAR BUILDERS
AHMED CONSTRUCTIONS AND INFRA PVT LTD
stage.html
html • 0.05 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .