Annual repair and maintenance to the non residential building ( 100MMT guest house, Gopabandhu stadium, Port club, Officers club and ladies club) of Paradip Port Township for the year 2024-25

Amount

Removing old cement plaster from walls including raking out joints 12mm deep including stacking the useful materials for reuse and removing the debris within 50m with supply of all labour, T&P, staging, scaffolding, etc. complete cleaning the debrises with all taxes, including leads & lifts transportation & disposing at specified place and as per direction of Engineer-in-charge.

Dismantling brick or stone masonry in lime or cement mortar under 3m height including stacking the useful materials for reuse and removing the debris within 50m cleaning the debrises with supply of all materials, labour, T&P, staging, scaffolding, watering, curing, taxes, testing charges, tollage, royalties, etc. complete but excluding GST & as per direction of Engineer-in-charge.

Dismantling and removing old tiled flooring including removing the base coarse and stacking the useful materials for reuse and removing the debris within 50m lead. cleaning the debrises with with supply of all materials, labour, T&P, staging, scaffolding, watering, curing, taxes,, tollage, royalties, etc. complete but excluding GST & as per direction of Engineer-in-charge all taxes, including leads & lifts transportation & disposing at specified place and as per direction of Engineer-in-charge.

Dismantling and removing R.C.C. columns, beams, slab, staircase landing, lintels including stacking the useful materials for reuse and removing the debris within 50m cleaning the debrises with with supply of all materials, labour, T&P, staging, scaffolding, watering, curing, taxes,, tollage, royalties, etc. complete but excluding GST & as per direction of Engineer-in-charge all taxes, including leads & lifts transportation & disposing at specified place and as per direction of Engineer-in-charge.

Dismantling 2.5 cm thick A.S.flooring including stacking the useful materials for reuse and removing the debris within 50m complete cleaning the debrises with supply of all materials, labour, T&P, staging, scaffolding, watering, curing, taxes, testing charges, tollage, royalties, etc. complete but excluding GST & as per direction of Engineer-in-charge

Dismantling G.C.I. or A.C. sheet roofing after carefully removing the bolts and nuts including stacking of the materials for reuse and removing the debris within 50m lead. complete cleaning the debrises with supply of all materials, labour, T&P, staging, scaffolding, watering, curing, taxes,, tollage, royalties, etc. complete but excluding GST & as per direction of Engineer-in-charge

Dismantling and removing doors, windows and ventilators including removal of frame, hinges, fastening and stacking the same for reuse and removing the debris within 50m lead with supply of all materials, labour, T&P, staging, scaffolding, watering, curing, taxes,, tollage, royalties, etc. complete but excluding GST & as per direction of Engineer-in-charge all taxes, including leads & lifts transportation & disposing at specified place and as per direction of Engineer-in-charge.

Dismantling 2.5cm thick grading concrete from the roof slab and cleaning the surface lowering and cleaning the debrises within 50m lead cleaning the debrises with with supply of all materials, labour, T&P, staging, scaffolding, watering, curing, taxes,, tollage, royalties, etc. complete but excluding GST & as per direction of Engineer-in-charge

Dismantling old tarfelt from the roof slab and cleaning the surface lowering and cleaning the debrises within 50m lead cleaning the debrises with with supply of all materials, labour, T&P, staging, scaffolding, watering, curing, taxes,, tollage, royalties, etc. complete but excluding GST & as per direction of Engineer-in-charge all taxes, including leads & lifts transportation & disposing at specified place and as per direction of Engineer-in-charge.

Earth work in all kind of soil with initial lead and lift including rough dressing in layers not exceeding 0.3m in depth and the Earth transported by transport vehicles with supply of all material labour transporation , taxes , tollage , royalties etc all complete but excluding GST as directed by EIC.

Filling in foundation and plinth with sweet sand including watering and ramming as directed by the Engineer-in-charge (Excluding cost of GST).(NB:- 10% Voids will be deducted from measurement quantity)

P.C.C(1:3:6) of using 40mm. & down C.B.G chips of approved quality in foundation & plinth including mixing hosting, laying to proper level & slope consolidating, curing, watering charges etc. complete including cost & supply of all materials, labour, T&P, taxes , tollage , royalties etc all complete but excluding GST as directed by EIC

Cement concrete (1:1.5:3) using 12mm to 20mm size C.B.G. chips for all floors, foundation & plinth etc. of approved quality mixing, hoisting, laying, compacting, curing with supply of all materials, labour, T&P, taxes, tollage transportations, staging, scaffolding, curing, etc. all complete but excluding GST as per direction of Engineer-in-charge.

Supply Tor/TMT steel manufactured by SAIL/TISCON/VIGAC Steel of Fe-500 confirming to IS-1786 including cutting, straightening, bending, binding & placing the grills in position for RCC works including binding the grills with binding wire of 18 to 20 gauge including cost of steel, all labour, materials, transportation charges, T&P, taxes, etc. all complete but excluding GST as per the direction of Engineer-in-charge. (NB: No payment shall be made for extra weight than theoretical co-efficient).

Providing rigid smooth leak proof centering & shuttering made of steel/ply, plank of approved quality for R.C.C. structures and deshuttering and removing the same after due period with supply of all materials, labour, T&P, taxes, royalties, tollage, etc. all complete but excluding GST as directed by Engineer-in-charge.

R.C.C. foundation and footing bases of columns mass concrete & pre-cast slab etc.

Beam, column, girder (GF)

Roof slab, landing, projection Chajja upto 4.30 mtr.

Brick work in Fly Ash Bricks of size 25cmx12cmx8cm having crushing strength not less than 75 Kg/Cm² to 99Kg/Cm² with C.M (1:6) including splay/cutting, racking out the joints curing, hoisting, staging at any height with cost and supply of all materials, labour, T&P, taxes, royalties, transportation charges, curing, testing charges etc. all complete but excluding GST as per direction of Engineer-in-charge

In Ground floor

12 MM thick Cement plaster with cement mortar (1:6) proportion, over brick work including racking out the joints, finished smooth to the exposed surface, rounding the corners wherever found necessary including supply of all materials, labour, T&P, staging, scaffolding, watering, curing, taxes, testing charges, tollage, royalties, etc. complete but excluding GST & as per direction of Engineer-in-charge

Neat cement punning over cement plaster using cement @2.20 kg/m2 & curing with supply of all materials, labour, T&P, staging, scaffolding, watering, curing, taxes, testing charges, tollage, royalties, etc. complete but excluding GST & as per direction of Engineer-in-charge.

P.C.C(1:2:4) of using 20 mm. & down C.B.G chips of approved quality in foundation & plinth including mixing hosting, laying to proper level & slope consolidating, curing, watering charges etc. complete including cost & supply of all materials, labour, T&P, taxes , tollage , royalties etc all complete but excluding GST as directed by EIC.

25mm. thick A.S. flooring in cement concrete (1:2:4) at all floors & levels using 12mm. and down grade hard black C.B granite chips of approved quality including mixing, hoisting, laying, compacting, curing, finished smooth to the exposed surface with a floating coat of cement punning, rounding the corners where found necessary including supply of all materials, labour, T&P, taxes, tollage, royalties, transportation charges, etc. complete but excluding GST asdirected by Engineer-in-charge. (Repair work)

40mm. (av) thick graded cement concrete in C.C.(1:2:4) using 12mm. to 6mm. size hard granite chips of approved quality including cleaning the roof top, washing, mixing, hoisting laying to proper level slope, gradient making rounding hunching at the corners, joints, finished smooth to exposed surface over 2 coats of sika topseal-107 or equivalent as water proofing course with supply of all materials, labour, T&P, taxes, tollage transportations, staging, scaffolding, curing, etc. all complete but excluding GST as per direction of Engineer-in-charge. (old work)

Supplying fitting fixing of chequred tiles as approved by EIC ( premimum Quality )in floors , treads or steps and landing on 25mm thick bed of cement mortar 1:1 (1cement : 1 sand) jointed with neat cement slury mixed with pigment to match the shades of the tiles including rubbing and polishing complete including supply of all materials, labour, T&P, taxes, tollage, royalties, transportation charges, etc. complete but excluding GST asdirected by Engineer-in-charge.

Supplying fitting fixing of Vitrified floor tiles ( premimum Quality 600 x600 mm size)in floors, treads or steps and landing on 12mm thick bed of cement mortar 1:3(1cement: 3 sand) jointed with neat cement slury mixed with pigment to match the shades of the tiles including rubbing and cleaning complete including supply of all labour material taxes tollage etc all complete but excluding GST as per direction of Engineer-in-charge.( Repair work)

Supplying fitting fixing of 6.5mm to 6.7mm thick ceramic wall tiles ( premimum Quality 200 x300 mm or 200 x200 mm size)as approved by EIC in floors, treads or steps and landing on 12mm thick bed of cement mortar 1:3(1cement: 3 sand) jointed with white cement slury mixed with pigment to match the shades of the tiles including rubbing and cleaning complete including supply of all labour material taxes tollage etc all complete but excluding GST as per direction of Engineer in charge.

Supplying fitting fixing of 20 mm thick granite 0.10 SQM TO 0.40 Sqm ( premimum Quality ) as approved by EIC in floors ,treads or steps and landing on 12mm thick bed of cement mortar 1:3(1cement : 3 sand) jointed with neat cement slury mixed with pigment to match the shades of the tiles including rubbing and wax polishing complete including supply of all labour material taxes tollage etc all complete but excluding GST as per direction of Engineer in charge.(Repair work)

Supplying, fitting & fixing of WPC door and window frames of required size as per requirment with required staging, scaffolding, including all leads & lifts, transportation charges with supply of all labour, T&P, all taxes etc. complete as per direction of Engineer-in-charge Excluding cost of GST.

SSupplying fitting and fixing of 32mm thick WPC door/ window shutters including cost of loading & un-loading charges, stacking at departmental stores with supply of all labour, materials like hinges, towe bolt, handle, aldrop etc. T&P, all taxes, transportation, etc. complete as per direction of Engineer-in-charge (Excludicng cost of GST) .

Taking out the door and window shutters and refixing them including screws as may be required etc. completesupply of all labour, materials, T&P, Scafolding taxes, etc. complete but excluding GSTas directed by Engineer in charge. as directed by Engineer in charge.

Doors

Windows

Providing, supplying, fitting, fixing of M.S. grills for windows of approved quality & design including fabrication charges, with supply of labour and material,machinery, cost of fuel, electrode, gas, consumables hire and running charges of all kind of equipments,taxes,tollages etc all complete but excluding GST as per direction of Engineer-in-charge.

Providing fitting, fixing of Al. door with anodized Al. door section No. 9202 as vertical member, 9201 as top member and 9200 as bottom and middle member and size of the aluminium section is 125 mm x 37 mm x 1.50 mm and 12mm thick pre-laminated board on bottom & 6 mm plain glass on top fixed door frame by means of tapered clip No. 4660 and the frame to be completed by means of jointing angle No. 1855 including providing rubber beading, aluminum U channels, angle, clips, required nos. of handles, tower bolts, hooks, mortise lock & hydraulic door stopper as per relevant I.S. specification, etc. all finished including supply of all labour, materials, scaffolding up to any height transportation charges T&P, all taxes etc. complete by excluding GST as directed by the Engineer-in-charge.

Supplying, fitting, fixing up AL window (sliding type) made up aluminum Section 9778 as window fram, section No. 4095, 4096 & 9777, 3994 as shutter frame with 5mm thick black glass as panel fitted with rubber bending including locking arrangement including all fitting including supply of all labour, materials, scaffolding up to any height transportation charges T&P, all taxes etc. complete by excluding GST as directed by the Engineer-in-charge.

Supplying fitting, fixing fully glazed aluminum framed open able windows using15 micron anodized OEL aluminum section 2082 as out section, 9139 as mullion section, 4124 as a shutter section frame with tapered clip of section 4125, aluminum angle , rubber beading, friction stay and handle etc. with 5mm black glass. including locking arrangement including all fitting including supply of all labour, materials, scaffolding up to any height transportation charges T&P, all taxes etc. complete by excluding GST as directed by the Engineer-in-charge.

Supplying, fitting and fixing of 30mm thick P.V.C. shutter having shutter panel made from infil consisting of hollow rigid PVC extruded section having dimension of 200 x 20mm and joined with one another by sliding locking system. The shutter frame shall be made from rigid PVC multicavity hollow chamber a type extruded section in an over all dimension of 30 x 59mm (Tolerance+ 1mm). Four corners of the shutter jointed with one another by steel screw after insetting 4 Nos solid plastic L-shaped brackets or MS recatangular tubular galvanized and then 2 nos of bright steel rods of 6mm diameter shal be inserted horizontally through stiles and panels with 2 nos of check nuts and washers with PVC door frame made from extruded PVC multi-chamber hollow section having dimensions of 48mm x 40mm (Tolerance + 1mm) with wall thickness 2.0mm + 0.2mm. Horizontal and vertical section shall be joined by steel screw after inserting M.S. tubular rectangular galvanized L-shaped or solid plastic brackets of size 200mm x 75mm with metred cut at the cone `. Hinges side of the frame shall be reinforced with M.S. tubular section of size 19mm x 19mm and 1mm + 0.1mm.The frame will be fixed to the wall with the help of 3 nos 75mm long and 4mm dia steel screw and expandable fasteners on each side of the door frame including with supply of all labour, materials, scaffolding up to any height transportation charges T&P, all taxes etc. complete by excluding GST as directed by the Engineer-in-charge.

Supplying, fitting, fixing Sal wood frame choukaths for doors, windows, ventilators, coaltaring two coats to wall side face of frame, fixing to position with required nos. of W.I. clamps of size 25cm to 30cm long, 35mm wide, 2mm to 3 mm thick in C.C(1:3:6) including cutting grooves in choukaths, jointing with adhesive solution fixing to proper position etc. all complete including cost and supply of all materials, labour, T&P, all taxes, transportation, staging, scaffolding etc. complete by excluding GST as directed by the Engineer-in-charge.

32mm thick flush door shutter made out of 32mm B.W.R. block board and with 1mm thick sunmica to both side pasted with adhesive including fixing fixtures like Godrej make Mortice Lock , Godrej make Door closure having 100mm Aluminum heavy hinges with cutting grooves in chaukaths mending good the damages etc. all complete including cost of all materials, labour, T&P, taxes, all transportation, staging, scaffolding, etc. complete by excluding GST & as per direction of the Engineer-in-charge.

Supply of 32mm thick seasoned piasal wood with anti-termite treated Window shutters having both side styled moulded, bottom rail of 5” size, top rail 5” & middle rails 5” along straight vertical moulded style of 5” width (total 2 panels) etc. including cost of all materials, loading & unloading Charges, all taxes, transportation charges, stacking at site store etc. all complete by excluding GST as directed by Engineer In-Charge.

Supplying, fitting & fixing of following materials of ISI make of approved quality for all heights with supply of all materials, labour, T&P,tollage, royalties, transportation, etc. all taxes excluding GST, complete as per direction of the Engineer-in-charge.

Aluminium handle 150mm

Aluminium hinges 150mm

Aluminium hinges 100mm

Aluminium T Bolt 250mm Long

Aluminium T Bolt 100mm Long

Aluminium Door stopper with twin rubber

Aluminium Aldrop 300mm long 16mm dia

wooden cleat

Godrej Floor Spring 80 Kg

Godrej Floor Spring 120 Kg

Hydraulic Door closer

Godrej make mortice lock

6 mm plain glass

Non Sal wood scantling & planks

BWR Ply 12 mm

1 mm sunmica

Supplying, fitting & fixing of precoated Galvolume metal sheet or its equivalent of 1000 mm width with total coated thickness of 0.5mm. for roof approved quality, drilling hole fixing of wind tie and ridges or valley including supply of all EPDM screw, ridge pieces, eve board, wind ties, cutting the sheet to proper profile with supply of all materials, labour, transportation, loading and unloading at both ends, T&P, etc. all complete but excluding cost of GST & as per the direction of Engineer-in-charge.

Supplying fitting & fixing of 1mm to 1.25mm thick PVC corrugated green sheet of approved quality including all charges, cutting the sheet proper profile & placing it over raft & purlin with all required screw, nut and bolt by drilling holes and fixing with windties water proof washers, etc.,including labour, materials, tollage, royalties,staging,scaffolding, transportation, etc. all taxes excluding GST complete as directed by the Engineer-in-charge.

Cutting the shrubs, bushes, cleaning, removing & disposing the debrises away from the site by Private Vehicles with all leads and lifts including levelling, dressing the ground with supply of all labour, T&P, taxes excluding GST, hire and running charges of vehicles including fuel, consumables, tollage etc. complete but excluding GST as directed by the Engineer-In-Charge.

Exterior painting two coats to wall surface with acrylic based weather coat paint with approved quality & shade having resistance to Fungus, Fading, including scraping, cleaning, brushing, washing the old paint, with bio wash, removing the flakes applying uniformly two coats including supply of all materials, labour, T&P, all taxes, transportation charges, staging, scaffolding, etc.all complete but excluding GST as per direction of Engineer-in-charge.

Distempering two coats of approved quality and shade to New work including supplying cleaning, brushing, the old paint, removing the flakes and finishing smooth the wall surface by applying plaster of paris or wall putty where required, sand papering including supply of all materials, labour, T&P, all taxes, transportation charges, staging, scaffolding, etc.all complete but excluding GST as per direction of Engineer-in-charge.

Finishing the wall surface by applying two coat Arcylic wall putty water base of approved quality on plaster surface area including cleaning, brushing, removing the flakes sand papering the same for smooth surface includingsupply of all materials, labour, T&P, all taxes, transportation charges, staging, scaffolding, etc.all complete but excluding GST as per direction of Engineer-in-charge.

Painting two coat with acrylic base plastic emulsion paint of approved quality shade including scraping, cleaning, washing the old paint with scraper filling the holes with plaster of paris preparing the surface by sand papering, applying paint uniformly including supply of all materials, labour, T&P, all taxes, transportation charges, staging, scaffolding, etc.all complete but excluding GST as per direction of Engineer-in-charge.

One coat Priming with water bond cement primer to the newly plaster surface of the exterior Wall or over the exisitng putty surface of the interior wall of approved make & shade manufactured by reputed manufacturer or equivalent to make an even finished surface in all heights with all scaffolding and staging charges including supply of all materials, labour, T&P, all taxes, transportation charges, staging, scaffolding, etc.all complete but excluding GST as per direction of Engineer-in-charge.

Painting two coats with approved quality & shade enamel paint on new iron work / old wood work k over one coat of red oxide primer including scraping, cleaning, the old paint surface sand papering, filling the holes with wax putty etc. all complete including supply of all materials, labour, T&P, all taxes, transportation charges, staging, scaffolding, etc.all complete but excluding GST as per direction of Engineer-in-charge.

Providing for attending day to day complaints regarding minor repair & maintenance work for non residential buildings as and when required on urgent basis with supply of all labour, all materials , T&P , all taxes excluding GST etc all complete as directed by Engineer-in-charge.

Supplying fitting & fixing of stainless steel gate of GR-304, required size with square bar , plate as approved design including cost & supply of all materials, labours, T&P, all transportation, staging, scaffoldings, , taxes if any excluding GST, fabricating, polishing, denting to the gates etc. all Complete as per direction of the Engineer- In-charge.

Supplying, fitting & fixing of following PH materials of CERA/JAQUAR/Duravit or equivalent make with all accesories etc. of good quality with ISI mark with all transportation loading & unloading at both ends with all taxes, tollage, royalty etc.with supply of all labour, T&P, taxes etc. all complete as per direction of Engineer-in-charge.(Excluding GST)

Commode EWC/AWC with cover

10 ltr capacity PVC low level cistern

Health faucet

15mm dia C.P angular stopcock

CP waste coupling 32mm size half thread with 80mm height

20mm dia 60cm long towel rail

C.P Towel ring

CP glass self 600mm long

Soap Holder

5mm thick bevelleged plate glass mirror 24" x 18" size with 100% siver back with anti crack film and mirror screw.

125mm dia CP floor Grattings

Counter top Porcelain Hand wash basin ( 550mm X 400mm )

Porcelain basin with pedestal ( 530mm X 425mm )

Standing Urinal ( 340x410x 265mm )

Sqautting Urinal ( 600 x350mm ) with vitetous china

CP toilet paper holder with flap

32mm PVC Waste pipe

CP tumbler holder of standard size

CP double coat hook rack

25 to 40mm cp extension nipple

12 to 25mm cp extension nipple

Soap dispenser with push botton of capacity 0.8 ltr

Paper towel dispenser of capacity 400-600C/Z tonels stainless steel

CP hand shower 27mm X 27mm square shape single flow ( ABS body chrome plated with grey face plate ) with rubbit cleaning system.

15mm dia C.P Pillarcock (Plaza/Amber)

15mm Connection pipe (PVC/CP)

Porcelain 23" IWC ( Orissa Pan)

commode sheet cover and clamp (Parryware)

4000ltr capacity PVC sintex tank pure white colour -3 core

2000 ltrs capacity (PVC-3 core white colour Sintex Make)

1000 ltrs Capacity (PVC-3 core white colour Sintex Make)

Steel Kitchen Sink (24x18x10)cm (Hindware/Parryware/Johnson)

15mm dia C.P stopcock(Amber/Plaza)

20mm dia C.P stopcock(Amber/Plaza)

20mm dia C.P concealed stopcock(Amber/Plaza)

15mm dia C.P angle stopcock(Amber/Plaza)

15mm long body C.P. Bib cock(Plaza)

15mm CP.Bibcock (Plaza/Amber)

15 mm dia Symet bibcock (Prayag))

15mm dia PVC pillar cock (Prayag)

Cistern washer

PVC washer

Long Flush bend for Cistern

White cement

M-seal

C.P two way bib cock (Jaquar/plaza)

25 mm GI tank nipple

Basin rack bolt

Porcelain 23" IWC ( Orissa Pan)

15mm Connection pipe (PVC/CP)

32mm PVC Waste pipe

C.I basin bracket in pair

Supply of UPVC/CPVC pipes (Sch-80) of different dia. with ISI mark & specification including transportation, all taxes, tollage, & disposing the materials in site office store with stacking including supplying of all labour, T&P etc complete as per direction of Engineer-in-charge(Excluding GST).

15mm UPVC Pipe (Supreme/Oriplast)

20mm UPVC Pipe(Supreme/Oriplast)

25mm UPVC Pipe(Supreme/Oriplast)

40mm UPVC Pipe(Supreme/Oriplast)

50mm UPVC Pipe(Supreme/Oriplast)

15mm CPVC Pipe (Supreme/Oriplast)

20mm CPVC Pipe(Supreme/Oriplast)

25mm CPVC Pipe(Supreme/Oriplast)

Supply of U-PVC/CPVC fittings of different dia. of medium quality as per ISI mark & specification including transportation, all taxes, tollage, & disposing the materials in site office store with stacking including supplying of all labour, T&P etc complete as per direction of Engineer-in-charge(Excluding GST)

15mm Dia. U-PVC union

20mm Dia. U-PVC union

25mm Dia. U-PVC union

40 mm dia U-PVC union

50 mm dia U-PVC union

15mm Dia. U-PVC elbow

20mm Dia. U-PVC elbow

25mm Dia. U-PVC elbow

40mm Dia. U-PVC elbow

50mm Dia. U-PVC elbow

15mm Dia. U-PVC tee

20mm Dia. U-PVC tee

25mm Dia. U-PVC tee

40mm Dia. U-PVC tee

50mm Dia. U-PVC tee

15mm Dia. U-PVCsocket/ copper

20mm Dia. U-PVC socket

25mm Dia. U-PVC socket

40mm Dia. U-PVC socket

50mm Dia. U-PVC socket

15mm Dia. U-PVC MTA ( Brass Threaded)

20mm Dia. U-PVC MTA( Brass Threaded)

25mm Dia. U-PVC MTA( Brass Threaded)

40mm Dia. U-PVC MTA( Brass Threaded)

50mm Dia. U-PVC MTA( Brass Threaded)

15mm Dia. U-PVC FTA( Brass Threaded)

20mm Dia. U-PVC FTA( Brass Threaded)

25mm Dia. U-PVC FTA( Brass Threaded)

40mm Dia. U-PVC FTA( Brass Threaded)

50mm Dia. U-PVC FTA( Brass Threaded)

U-PVC Paste

Thread tape

15mm PVC Ball Valve

20mm PVC Ball Valve

25mm PVC Ball Valve

40mm PVC Ball Valve

50mm PVC Ball Valve

Upvc clamp (15mm to 50mm)

Supplying ,fitting and fixing of the following PVC pipes and fittings of different dia with ISI mark (Supreme) including loading and unloading at both ends with all cost of materials,labours,T&P,,taxes,royalties etc.Allcomplete as per direction of engineering in charge. (Excluding GST)

110mm PVC Pipe

75mm PVC pipe

110mm PVC door bend

110mm PVC plain bend

110mm PVC P trap

110mm PVC NAHNI trap

110mm PVC Gully trap

50mm PVC floor trap

110mm PVC S/J with door

110mm PVC D/J with door

110mm PVC offset

75mm PVC door bend

75mm PVC plain bend

75mm PVC S/J with door

75mm PVC D/J with door

75mm PVC Cowl

110mm PVC Cowl

75mm PVC Clamp

110mm PVC Clamp

Cleaning of O.H tank of multistoried building, cleaning the deposited silt inside the tanks by aid of pans & vessels & brushing the interior surface by soft brushes using bleaching / surf wash for germ free as per direction with supply of all labour & pumping out water by diesel pump with hire & running charges of pump including cost of fuel & operator scaffolding upto any height if required etc complete as per direction of Engineer-in-charge.(Excluding GST)

Cleaning of sewerage line, septic tanks (Big & small) man hole, I.C., soak-way pit & disposing sewerage sludge & burring in a pre-digged pit near by & closing with local earth with supply of all labour, T&P, pump including hire & running charges of pumps all taxes etc. all complete as per direction of Engineer-in-charge. (Excluding GST)

Man holes

Inspection Chamber

Grease Chamber

Small size septic tank

Big size septic tank

Removal of sewage & sludge from septic tank and sewage sump by using gully tanker or equivalaent machine and deposing it at designated place with supply of all materials labour, t&p etc all comple as per direction of Engineer-in-charge. (Excluding GST)

Providing and laying APP (Atactic Polypropylene Polymer) modified prefabricated five layer, 3 mm thick water proofing membrane, black finished reinforced with glass fibre matt consisting of a coat of bitumen primer for bitumen membrane @ 0.40 litre/sqm by the same membrane manufactured of density at 25°C, 0.87 - 0.89 kg/litre and viscocity 70 - 160 cps. Over the primer coat the layer of membrane shall be laid using butane torch and sealing all joints etc., and preparing the surface complete. The vital physical and chemical parameters of the membrane shall be as under : Joint strength in longitudinal and transverse direction at 23°C as 350/300 N/5 cm. Tear strength in longitudinal and transverse direction as 60/80N. Softening point of membrane not less than 150°C. Cold flexibility shall be upto -2°C when tested in accordance with ASTM, D - 5147. The laying of membrane shall be got done through the authorised applicator of the manufacturer of membrane

SM ENTERPRISES (BID ID -3117021)

M/s.Bula Bilash Construction (BID ID -3117091)

CIS GLOBAL INFRATECH PVT LTD (BID ID -3112130)