Development of park at Main Campus Chatha Jammu

Amount

Earth work in excavation by manual/mechanical means over areas (exceeding 30 cm in depth, 1.5 m in width as well as 10 m2 on plan) including disposal of excavated earth lead upto 50 meters and lift upto 1.5 m, as directed by Engineer-in-Charge. - All kinds of Soil

Providing and laying in position cement concrete of specified grade including curing but excluding the cost of centring and shuttering. All work upto plinth level with:

1:5:10 (1 cement : 5 fine sand : 10 graded stone aggregate 40 mm nominal size)

1:3:6 (1 Cement : 3 coarse sand : 6 graded stone aggregate 20 mm nominal size) (using 30 % boulders including cost and carriage of boulders)

Providing and laying in position cement concrete of specified grade including curing but excluding the cost of centring and shuttering. All work upto plinth level with: 1:1½:3 (1 cement :1½ coarse sand: 3 graded stone aggregate 20 mm nominal size)

Providing and laying in position specified grade of reinforced cement concrete, excluding the cost of centering, shuttering, finishing and reinforcement - All work up to plinth level : 1:1.5:3 (1 cement : 1.5 coarse sand : 3 graded stone aggregate 20 mm nominal size)

Reinforced cement concrete work in walls (any thickness), including attached pilasters, buttresses, plinth and string courses, fillets, columns, pillars, piers, abutments, posts and struts etc. above plinth level up to floor five level, excluding cost of centering, shuttering, finishing and reinforcement : 1:1.5:3 (1 cement : 1.5 coarse sand : 3 graded stone aggregate 20 mm nominal size)

Centering and shuttering including strutting, propping etc. and removal of form for:

Foundations, footings, bases of columns etc. for mass

Lintel, beams, plinth beams, girders, bressumers and

Columns

Roofs

Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete upto & Above plinth level

Brick work with common burnt clay (non-modular) bricks of class designation 7.5 in foundation and plinth including curing in : Cement mortar 1:6 ( 1 cement : 6 coarse sand)

Half brick masonry with common burnt clay (non-modular) bricks of class designation 7.5 in foundations and plinth including curing in : Cement mortar 1:4 ( 1 cement : 4 coarse sand)

Coursed Rubble Masonry with hard stone in foundation and plinth and curing complete with: Cement mortar 1:6 (1 Cement : 6 coarse Sand)

Filling available excavated earth (excluding rock) in trenches, plinth, sides of foundations etc. in layers not exceeding 20 cm in depth, consolidating each deposited layer by ramming and watering, lead upto 50 m and lift upto 1.5 m.

Supplying and filling in plinth with RBM (River Bed Material) under floors including, watering, ramming, consolidating and dressing complete

15mm cement plaster of mix: 1 : 6 (1 cement : 6 fine sand)

12mm Cement plaster of mix: 1:6 (1 cement: 6 fine sand)

6 mm cement plaster to ceiling of mix 1 : 3 (1 cement : 3 fine sand)

Providing and fixing 18mm thick gang saw cut mirror polished premoulded and prepolished, machine cut for kitchen platforms, vanity counters, window sills , facias and similar locations of required size, approved shade, colour and texture laid over 20mm thick base cement mortar 1:4 (1 cement : 4 coarse sand) joints treated with white cement, mixed with matching pigment, epoxy touch ups, including rubbing, curing, moulding and polishing to edges to give high gloss finish etc. complete at all levels.

Granite of any colour and shade

Area of slab over 0.50 sqm.

Providing and fixing 1st quality ceramic glazed floor tiles conforming to IS : 15622 (thickness to be specified by the manufacturer ) of approved make in all colours, shades except burgundy, bottle green, black of any size as approved by Engineer-in-Charge in skirting, risers of steps and dados over 12 mm thick bed of cement Mortar 1:3 (1 cement: 3 coarse sand) and jointing with grey cement slurry @ 3.3kg per sqm including pointing in white cement mixed with pigment of matching shade complete.

Providing and fixing Ist quality ceramic glazed wall tiles conforming to IS : 15622 (thickness to be specified by the manufacturer), of approved make, in all colours, shades except burgundy, bottle green, black of any size as approved by Engineer- in-Charge, in skirting, risers of steps and dados over 12 mm thick bed of cement mortar 1:3 ( 1 cement : 3 coarse sand) and jointing with grey cement slurry @ 3.3 kg per sqm, including pointing in white cement mixed with pigment of matching shade complete., jointing, curing, lift charges etc., complete for finished item of work (for toilets)

Providing and laying vitrified floor tiles in different sizes (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to IS:15622 of approved make, in all colours and shades, laid on 20mm thick cement mortar 1:4 (1cement :4 coarse sand) including grouting the joints with white cement and matching pigments etc. complete - 600x600 mm size

Providing and laying Vitrified tiles in different sizes (thickness to be specified by manufacturer) with water absorption less than 0.08 % and conforming to I.S. 15622, of approved make in all colours & shade in skirting, riser of steps, over 12 mm thick bed of cement mortar 1:3 (1cement: 3 coarse sand), jointing with grey cement slurry @ 3.3kg/sqm including grouting the joint with white cement & matching pigments etc. complete.

Providing and fixing Glass mossaic tiles on finished plain wall surface of size 20 mm x 20 mm x 4 mm in all colour, design , fixing in approved design. The glass mosaic tiles shall be fixed on the wall surface with the help of approved adhesive applied at the rate of 2.5 kg per sqm and grouting of the same. All completed as per direction of Engineer-in-charge.

Design, Supply Installation of Dome jet Fountain including under water light 6 watt 8 no., wiring 3x 1.5mm², junction box IP 65 2No. and allied work with control panel earthing complete job.

Providing and fixing factory made UPVC door frame made of UPVC extruded, section having an overall dimension, as below (tolerance+/-1mm with wall thickness 2.0mm +/-0.2mm, corners of the door frame to be joined with galvanized brackets and stainless steel screws, joint mitred and plastic welded. The hinges side vertical of the frames reinforced by galvanized MS tube of size 19x19mm and 1mm +/ 0.1mm wall thickness and three numbers stainless steel hinges fixed to the frame complete as per manufacturers’ specifications and direction of engineer-in-charge) - Extruded section profile size 48x40mm

Providing and fixing to existing door frames: 24mm thick factory made PVC door shutters made of styles and rails of a UPVC hollow section of size 59x24mm and wall thickness 2mm +/- 0.2mm with inbuilt edging on both sides. The styles and rails mitred and joined at the corners by means of MS galvanized/plastic brackets of size 75x220mm having wall thickness 1.0mm and stainless steel screws. The styles of the shutte reinforced by inserting galvanized MS tube of size 20x20mm and 1mm +/- 0.1mm wall thickness. The lock rail made up of ‘H’ section, a UPVC hollow section of size 100x24mm and 2mm +/- 0.2mm wall thickness fixed to the shutter styles by means of plastic/galvanized MS ‘U’ cleats. T he shutter frame filled with UPVC multi-chambered single panels of size not less than 620mm, having over- all thickness of 20mm and 1mm +/-0.1mm wall thickness. The pannels filled vertically and tie bar at two places by inserting horizontally 6mm galvanized MS rod and fastened with nuts and washers, complete as per manufacturers’ specification and direction of engineer-in- charge. (For W.C and bathroom door shutters).

Distempering with oil bound washable distemper of approved brand and manufacture to give an even shade on New work (two or more coats) over and including priming coat with water thinnable cement primer

Finishing walls with acrylic smooth exterior paint of required shade on New work (Two or more coats applied @ 1.67 liter/10sqm over and including priming coat of exterior primer applied @ 2.20kg/10sqm)

Providing and fixing M.S. grills of required pattern in frames of windows etc. with M.S. flats, square or round bars etc including priming coat with approved steel primer all complete

Steel work in built up tubular ( round, square or rectangular hollow tubes etc.) trusses etc., including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer, including welding and bolted with special shaped washers etc. complete.

Hot finished welded type tubes.

Painting with synthetic enamel paint of approved brand and manufacture to give an even shade : Two or more coats on new work.

Providing, laying and making kerb channel 30cm wide and 50mm thick of cement concrete 1:3:6 (1 cement : 3 coarse sand : 6 graded stone aggregate 20mm nominal size) over 75mm bed of dry brick ballast 40mm nominal size well rammed and consolidated and grouted with fine sand including finishing the top smooth etc. complete as per direction of Engineer-in-charge.

Providing and laying factory made chamfered edge Cement Concrete paver blocks in footpath, parks, lawns, drive ways or light traffic parking etc, of required strength, thickness & size/ shape, made by table vibratory method using PU mould, laid in required colour & pattern over 50mm thick compacted bed of sand, compacting and proper embedding/laying of inter locking paver blocks into the sand bedding layer through vibratory compaction by using plate vibrator, filling the joints with sand and cutting of paver blocks as per required size and pattern, finishing and sweeping extra sand complete all as per direction of Engineer-in-Charge. 60mm thick cement concrete paver block of approved colour, design & pattern.

Providing and placing on terrace (at all floor levels) polyethylene water storage tank ISI : 12701 marked, with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipes but without fittings and the base support for tank

Providing and fixing water closet squatting pan (Indian type W.C pan) with 100mm sand cast iron P or S trap, 10 litre low level white P.V.c flusing cistern with manually controlled device (handle level) conforming to IS : 7231, Parryware/ Hindware / Seabird/ Orient (coral) with all fittings and fixtures complete including cutting and making good the walls and floors wherever required Make:- (Hindware/Jaquar/Cera/Plumber/Parryware)

White vitreous china Orissa pattern W.C pan of size 580x440mm with integral type foot rests.

Providing and fixing white vitreous china pedestal type water closet (European type W.C. pan) with seat and lid, 10 litre low level white P.V.C. flushing cistern, including flush pipe, with manually controlled device (handle lever), conforming to IS : 7231, with all fittings and fixtures complete, including cutting and making good the walls and floors wherever required : Make( Hindware/Jaquar/Cera/Plumber/Parryware)

W.C. pan with ISI marked white solid plastic seat and lid

Providing and fixing white vitreous china flat back or wall corner type lipped front urinal basin of 430x260x350 mm and 340x410x265 mm sizes respectively with C.P. brass spreaders with brass unions and G.I clamps complete, including painting of fittings and brackets, cutting and making good the walls and floors wherever required : Make:- (Hindware/Jaquar/Cera/Plumber/Parryware)

Providing and fixing white vitreous china wash basin including making all connections but excluding the cost of fittings. Make( Hindware/Jaquar/Cera/Plumber/Parryware)

Flat back wash basin of size 550x400 mm.

Providing and fixing white vitreous china pedestal for wash basin completely recessed at the back for the reception of pipes and fittings. Make( Hindware/Jaquar/Cera/Plumber/Parryware)

Providing and fixing P.V.C. waste pipe for sink or wash basin including P.V.C. waste fittings complete.

Semi rigid pipe

32 mm dia

Providing and fixing mirror of superior glass (of approved quality) and of required shape and size with plastic moulded frame of approved make and shade with 6 mm thick hard board backing :

Rectangular shape 453x357 mm

Providing and fixing CP towel ring with concealed fittings/ arrangement of approved quality.

Providing and fixing G.I. pipes complete with G.I. fittings and clamps, i/c cutting and making good the walls etc. : Internal work – Exposed on wall.

15 mm dia. nominal bore

20 mm dia. nominal bore

Providing and fixing G.I. pipes complete with G.I. fittings including trenching and refilling etc. : External work

25 mm dia. nominal bore

32 mm dia. nominal bore

Providing and fixing ball valve (brass) of approved quality, High or low pressure, with plastic floats complete :

20 mm nominal bore

25 mm nominal bore

Constructing brick masonry manhole in cement mortar 1:4 ( 1 cement : 4 coarse sand ) with R.C.C. top slab with 1:2:4 mix (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size),foundation concrete 1:4:8 mix (1 cement : 4 coarse sand : 8 graded stone aggregate 40 mm nominal size), inside plastering 12 mm thick with cement mortar 1:3 (1 cement : 3 coarse sand) finished with floating coat of neat cement and making channels in cement concrete 1:2:4 (1cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size) finished with a floating coat of neat cement complete as per standard design :

Inside size 90x80 cm and 45 cm deep including C.I. cover with frame (light duty) 455x610 mm internal dimensions, total weight of cover and frame to be not less than 38 kg (weight of cover 23 kg and weight of frame 15 kg) :

With common burnt clay F.P.S. (non modular) bricks of class designation 7.5

Providing and fixing of the following sanitary items with necessary fittings complete item

Soap dish of nominal size (CP)

PVC connection

CP gratings (100 mm)

CP long body bib cok of approved make (15 mm nominal bore) Make:- (Hindware/Jaquar/Cera/Plumber/Parryware)

CP short body bib cok of approved quality (15 mm nominal bore) Make:- (Hindware/Jaquar/Cera/Plumber/Parryware)

C.I. waste coupling 30 mm of 79 mm length x 77 mm breadth

Angle Valve (15 mm nominal bore) Make:- (Hindware/Jaquar/Cera/Plumber/Parryware)

Providing & fixing Jet for seats. Make:- (Hindware/Jaquar/Cera/Plumber/Parryware)

Providing and fixing followong PVC items ( Make:-Supreme/Prince/Astral/Finolex)

PVC pipe (150 mm dia)

PVC pipe (110 mm nominal dia)

PVC pipe (75 mm nominal dia)

PVC plain bend (110 mm)

PVC plain bend (75 mm)

Door bend (110 mm)

Door bend (75 mm)

Trenching in ordinary soil upto a depth of 60 cm including removal and stacking of serviceable materials and then disposing off by spreading and neatly leveling within a lead of 50 m and making up the trenched area to proper levels by filling with earth or earth mixed with sludge or/and manure before and after flooding trench with water (excluding cost of imported earth, sludge or manure)

Supplying and stacking of good earth at site including royalty (earth measured in stacks will be reduced by 20% for payment)

Preparation of mounds of various size and shape by available excavated/supplied earth in layers not exceeding20 cm in depth, breakin clods, watering of each layer dressing etc. lead upto 50 meter and lift upto 1.5 m complete as per direction of officer- in -charge

Preparation of beds for hedging and shrubbery by excavating 60 cm deep and trenching the excavated base to a further depth of 30 cm, refilling the excavated earth after breaking the clods and mixing with sludge or manure in the ration of 8:1 (8 parts of stacked volume of earth after reduction by 20% : 1 part of stacked volume of sludge or manure after reduction by 8 %), flooding with water, filling with the earth if necessary, watering and finally fine dressing, leveling etc. including stacking & disposal of materials declared unserviceable and surplus earth by spreading and leveling as directed, within a lead of 50 mtr. and lift upto 1.5 mtr. complete ( cost of sludge, manure or extra earth to be paid for separately)

Digging holes in ordinary soil and refilling the same with the excavated earth mixed with manure or sludge in the ratio of 2:1 by volume (2 part of stacked volume of earth after reduction by 20% :1 part of stacked volume of manure after reduction by 8%) flooding with water, dressing including removal of rubbish & surplus earth, if any with all leads & lifts (cost of sludge, manure or extra good earth, if needed, to be paid for separately)

Holes 90 cm dia& 90 cm deep

Holes 60 cm dia& 60 cm deep

Holes 45 cm dia& 45 cm deep

Edging with bricks laid dry length wise including excavation, refilling, consolidating with hand packing and spreading neatly surplus earth within a lead of 50 m:

Ground Covers

Fire Cracke (Russelia equisetiformis)

Flower bed: vinca Rosa

Ground covers:- Big Root Geranium

Shurbs

hedges: Bougainvillea

hedges:- Peacock flower

Ornamental Trees

at edges:- Black Bamboo 21"

at edges:- Furcraea 21"

Crinum Lilly(Broad leaf) 21"

Long:- Golden Junipus 18"

Providing Children play equipment of standard make including cost and conveyance of all material and all labour charges, all operational and incidental charges etc complete.

Slide and Ladder 8 feet

Swing Two seater

Spiral Swing

Sea-Saw 4 seater

Merry go round

for foundations of Merry go round

Providing seating area development by providing cast Iron /Cement seats as directed by Engineer in charge etc, complete.

Idle Park bench

Providing Open Gym Equipments of standard make including cost and conveyance of all material and all labour charges, all operational and incidental charges etc complete.

PARALLER BAR

HORIZONTAL BAR

HIP TWISTER

THAICHI SPINNER

DOUBLE AIR WALKER

BICYCLE

LEG PRESS

ROWING MACHINE

CHEST PRESS DOUBLE

5 Long 3 seater Bench and cement bench and back rest and arms provision and red colour and green

For Fitting of Benches

ABS BOARD

SURFING BOARD DOUBLE

WARM UP BAR

SHOULDER PRESS DOUBLE

PULL UP STATION

The Cast Iron Ornamental gazebo of size 20’ X 20’ feet. The top main structure will be fabricated in MS Frame Of size 80mm X40mm as main frame with 75 X 25 mm With 25 X 25mm for fixing the Manglore clay tiles. The Bottom of MS Main frame the Eight poles of size 3 ½” Round MS pipe of height 8’ feet will be fixed with cast iron Heavy Base Design will be provided .The Top Cast Iron Ornamental Arches will be fixed to each Poles alternatively. The Cast Iron Flower type design borders will fixed at the corners Of main frame top edges for beautification of Gazebo. Including cost of foundation etc. and full finish with - erection, Mangloori clay tiles , granite flooring, painting and Transportation charges etc.

Providing and installation/fixing Buddha Statue made up of brass and having the following specifications and design enclosed.

SPECIFICATIONS BRASS STATUE 67 INCH HEIGHT X 47 INCH WIDTH X 30.5 INCH DEPTH 240 KG WEIGHT

Installation of Shallow Tube Well including boring 4", fixing of pipe (3"), 5HP electric motor with all the associated assecories like delivery pipe, service line etc including covering for motor complete item

Providing and fixing/installation of System-Pop-up Irrigation System complete item

HDPE Pipe 75mm OD ISI Marked

HDPE Pipe 63mm OD ISI Marked

HDPE Pipe 50mm OD ISI Marked

HDPE Pipe 40mm OD ISI Marked

Control Valve 63 mm

Control Valve box

Pop up sprinkler with swing joint (10 mtr & above)

Screen filter 25 cum/hr

Fittings & accessories

Supplying and Laying of XLPE Insulated and PVC Sheathed Power Cable of 11KV/ 1.1 KV Grade of the following size direct in Ground including excavation,sand Cushioning,Protective Covering and Refilling the Trench as Required.

4 C x 10 sq.mm LT XLPE Insulated Aluminium Conductor Armoured Cable

4 C x 25 sq.mm LT XLPE Insulated Aluminium Conductor Armoured Cable

3 c x 1.5 Sq.mm Sheathed unarmoured Multistrand Wire as Per IS: 694

CABLE END TERMINATIONS :-

Termination of PVC/XLPE insulated armoured cables and connection of leads including the supply of HT Termination Kit, cables glands, lugs, cutting, stripping of cable insulation, drilling of gland plate, fixing of cable gland, crimping the lug on to the conductor, supply, fixing & marking with number ferrules etc. All necessary GI consumables & hardware, including all labour and materials complete as per approved drawings, directions of Engineer-In-Charge. Scope will also include provision of additional supports, if required, with steel for proper dressing & support of cables as per approved drawings, specification and directions of Engineer-In-Charge.

L.T CABLE TERMINATION :-

4 C x 10 sq.mm LT XLPE Insulated Aluminium Conductor Armoured Cable

4 C x 25 sq.mm LT XLPE Insulated Aluminium Conductor Armoured Cable

Supplying,Installation and Testing of 100 mm G.I. Pipe Filled with Crystalline conductive Mixture with Copper Strip of Size 40 mm x 6 mm of Length 2 mtr with Ecofriendly Backfill Compound 50 Kg.

Providing and Fixing 25mm x3 mm G.I Strip in 50 mm dia. G.I Pipe FRL Earth Electrode including connection with Brass nut ,bolt,spring,washer,excavation and refilling etc. as required.

Providing and fixing 6 SWG dia G.I. wire on surface or in recess for loop earthing as required.

Supply & Fabrication with steel sections and erection of MS base frames , MS angle channels , flat etc for supporting various items of equipment Panel , Bus ducts , adaptor boxes addition support for proper cable termination, cable trays, etc. Including welding, bolting, chipping , grouting etc, including applying one antirust coat of approved primer and two finished coats of approved paint , breaking and finishing of walls, floors etc. The scope is inclusive of minor civil work as required, supply & installation of GI hardware materials, consumables, anchor fasteners, tools & tackles and necessary labour with supervision but not limited to, and complete as per approved drawings, specification and directions of Engineer-In-Charge. Scope also includes contractor's own lifting and transporting arrangement.

Supply,Installation of 80 mm G.I Pole 3.0 mtr in height with IP 67 Junction Box with MCB's along with Foundation in concerte mix of 1:2:4 (600x600x600 mm) including painting with two coats of silver paint for Foundation and muffler as per the Drawing.

Supply,Installation,Testing and Commissioning of Post Lantern Lamp 30 watt made out of Pure Polyster UV Resistant Powder Coated die cast Aluminium housingwith PMMA clear Diffuser for uniform illumination.

Supply,Installation,Testing and Commissioning of Tall Bollard made out of extruded aluminium housing IP:65. 10 W

SITC of IP: 66/IP:67 PVC Junction Box having the Facility to house 4 way Bakellite strip for connection to the spike light

Supply,Installation,Testing and Commissioning of Garden Light polyster coated aliminium housed bush light along with foundation.

Supply,Installation,Testing and Commissioning of Flood Light 60 W IP:66 made out of Aluminium die cast Housing,Toughened Glass etc.60 Watts.

Supplying and Laying of 1 No. DWC High Density Poly ethylene Pipe having Corrugation on Outer wall and Plain surface inner wall Conforming to IS: 14930 Part-1 and 2 Complete with accessories for Protection of 1.1 KV Grade under Ground cable Directly in Ground at a Depth of 50 CM including excavation and Refelling the Trench Etc.as Required .

Size 63/50mm

Incomer

100 A FP MCCB 36 KA Microprocessor Based (01 Nos)

Indications Type LED Make L&T R-Y-B / ON - OFF - TRIP(02 Set)

VoltMeter& Ammeter(02 Nos

6A MCB TPN(03 Nos)

C.T 80/5 A(03 Nos)

Out Goings

32 A 4P MCB 10 Ka(08 Nos)

Wiring for light point/ fan point/ exhaust fan point/ call bell point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable in Existing surface / recessed medium class PVC conduit, with modular switch, modular plate, suitable GI box and earthing the point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable etc. as required.

Wiring for Light /Power Plug with 2 x 4 sq.mm FRLS PVC Insulated Copper Conductor single core cable in Existing surface/Recessed medium class PVC Conduit along with 1 No. 4 sq.mm FRLS PVC Insulated copper conductor single core cable for loop earthing as required.

Wiring for Circuit/Submain Wiring along with earth Wire with the following Sizes of FRLSPVC insulated copper conductor,single core Cable in Existing surface/Recessed medium class PVC conduit as required.

2 X 2.5 SQ.MM + 1 X 2.5 SQ.MM EARTH WIRE

4 X 10 sq. mm + 2 X 6 sq. mm earth wire

Supplying and fixing modular blanking plate on the existing modular plate and switch box excluding modular plate as required

Supplying and Fixing suitable size G.I box with modular plate and cover in front on surface or in recess,including providing and fixing 6 pin 15/16 amps modular socket outlet and 15/16 amps modular switch,connection,painting etc. as required.

Supplying and fixing suitable size GI box with modular plate and cover in front on surface or in recess, including providing and fixing 3 pin 5/6 A modular socket outlet and 5/6 A modular switch, connections etc. as required.

Supplying and fixing following way, horizontal type three pole and neutral, sheet steel, MCB distribution board, 415 V, on surface/ recess, complete with tinned copper bus bar, neutral bus bar, earth bar, din bar, interconnections, powder painted including earthing etc. as required. (But without MCB/RCCB/Isolator)

4 way (4 + 12), Double door

Supplying and fixing following rating, four pole, 415 V, isolator in the existing MCB DB complete with connections, testing and commissioning etc. as required.

Supplying and fixing 5 amps. to 32 amps.rating 240 volts 'C' series, miniature circuit breaker of following poles in the existing MCB DB complete with connections, testing and commissioning etc. as required.

Single Pole

Double Pole

Supply and Fixing Single Pole Blanking Plate in the Existing MCB DB complete as Required

SITC of pre-wired Surface Mounted Batten Light Fitting 20 W including connections with 1.5 sq.mm FR PVC insulated copper conductor single core cable and earthing etc as required,(Wipro)

Supply of AC 230/250 Volts, 50 Hz exhaust fan with louveres of Following Sizes including connection etc. complete as required .

SITC of Ceiling Fan,Capacitor type suitable for low voltage operation including wiring the down rods of standard length(Upto 30 cm)with 1.5 sq.mm FR PVC insulated,copper conductor,single core cable including providing and fixing phenolic laminated sheet cover on the Fan Box etc as Required.

1200 MM SWEEP(5 STAR)

RAJINDER SINGH

KULDEEP SINGH

ASHOK KUMAR SHARMA