MLACDS 2025 - 2026 Construction of Drama Stage at T.Meenatchipuram Panchayat.

Amount

Construction of Drama Stage at T.Meenatchipuram Panchayat.

Earthwork excavation in all clauses of soils and depositing on bank with initial lead and lift for foundation as per ss20B

Supplying and filling in foundations and basement with filling M- sand in layers not exceeding 15cm.thick,well watered,rammed and consolidated etc. complete complying with standard specifications.

Cement concrete 1:4:8 mix using 40mm ISS HBG metal for foundation including watering whenever necessary and laid in layers not more than 15cm thick compacting etc., complete complying with std. Specifications and as directed. Rate for 10 cum.

Brick work in c.m 1:5 mix using country bricks including cost & conveyance of all materials to site and all labour charges etc., complete.

Filling in basement with red gravel other than sand in layers not more than 15cm thick and well rammed, watered and consolidated including all labour charges as per standard specification.

Supplying and erecting centering for sides & soffits including supports and strutting up to 3.29m height for plane surfaces in all floors with all cross bracing using mild steel sheets of size 90cm x 60cm and 10 gauge stiffened welded with mild steel angles of size 25mm x 25mm x 3mm for boarding laid over country wood poists of size 10cm x 6.5cm dia spaced at about 90cm center to center etc., complete complying with std. Specifications and as directed.

Supplying and erecting centering for side and soffits including supports and strutting upto 3.29 m height for plane surfaces in all floors with all cross bracing use mild steels of size 90cm x 60cm and 10 gauge stiffned welded with mild steel angles etc

Supplying fabricating and placing in petition mild steel or ribbed for steel for all reinforced cement concrete works as per the design given including cost of steel and binding wire in all floors etc complete complying with standard specification (MS rod and RTS rod ) etc.,

RCC 1:1.5:3 mix using 20 mm ISS HBG metal for RCC items of works excluding cost of reinforcement and fabricating charges and centering and shuttering charges but including curing providing fixtures like fan clamps in the RCC floor or roof level wherever neccessary and bearing surfaces of walls, sides and bottom of slab,beams etc.,

Plastering with cement mortar 1:3 mix to 10mm thick including cost and conveyance of all materials & all labour charges etc., complete.

Plastering with cement mortar 1:5 mix to 12mm thick including cost and conveyance of all materials & all labour charges etc., complete.

Paving the floor with best quality Vertified Tiles of size 600 x 600 x 8mm of approved colour, shade and quality laid in cement mortar 1:3 (one cement and three crushed stone M.Sand) 20mm thick in all floors and the top pointed with the white cement mixed same colour pigments etc., complete complying with Standard specification. (The make and brand of the tiles should be got approved by Executive Engineer before use on works)

An MS square bar of 12mm size is welded to the inner face of the window at an equal interval not exceeding 100mm edge between them. All members are painted with one coat of anti-corrosive red oxide primer as directed by the departmental officers.All sections should be in confirmed with IS 7452/1990.The cost includes cost of all materials, labour charges and other incidental charges, etc., complete

Manufacturing, supplying and fixing of Steel doors with following specification.MS angle of size 40x40x6mm at 3.5 kg/m used for outer frame and MS Angle of size 35x35x5mm at 2.6 Kg/m for the shutter frame. Stiffeners with 32x6mm at 1.5 Kg/m MS Flat is provided as the lock rail of the door and welded intact on both ends to the shutter frame.18 G CR Sheets of best quality is laid as panel in the shutter frames. 18x5mm at 0.70 kg/m MS flat is welded over the 32x6mm at 1.50kg/m MS Flat on the rear side of the door, sandwiching the CR Sheet for rigidity.Additional stiffeners with 18x5mm at 0.7Kg/m MS flats are provided diagonally on the rear side of the shutter. 300mm length of hinges 2Nos, for shutter is provided.6 Nos. of 250mm length hold fasts 200mm length specified at the ends are welded to the outer frame of the door.Tower bolt 2 Nos. at the top provided.

Weathering Course Concrete using best quality broken brick jellyof 20 mm uniform guage in pure slaked lime ( NO Sand to be used ( over the RCC roof slab in the proportion of brick jelly to lime being 32 : 121/2 by volume laid over in single layer and consolidated to the required slope and finished thickness and beating the concrete with wooden beaters of approved pattern, keeping the surface constantly wet by sprinkling lime, jaggery water etc. complete complying with standard specifications and as directed.

Providing Granolithic pattern floor finish with c.c 1:2:4 mix using 10 to 12mm ISS metal including cost & conveyance of all materials to site and all labour charges etc., complete.

Finishing the top of roof with one course of machine pressed tiles of size 23cmx23cmx23mm of approved quality laid in cement mortar 1:3 mix to 12mm thick mixed with water proofing compound confirming to ISS by 2% weightof cement used and the joint pointed neatly to full depth of tiles with same water proofing compound with cement mortar, red oxide, etc., complete complying with std. Specifications.

Painting two coats with quality Oil bound distember paint over the existing priming coat including cost & conveyance of all materials to site and all labour charges etc., complete.

Painting two coats Plastic Emultion Pint over a coat of primer including removing loose particles and other materials including cost and conveyance of all materials preparation of surface by and labour charges etc. complete.

Painting new iron works such as steel doors, windows, ventilators, window bars, balustrades etc., with two coats of best approved first quality and colour of synthetic enamel paint over the existing red oxide priming coat in all floors excluding cost of priming coat etc., complete complying with standard specification. (The make, quality and colour of paint should be got approved by the Executive Engineer before use on works.)

Supplying and fixing cuddapah slab for cupboard shelf

Supplying and fixing PVC Rain water down fall pipes of following dia meter etc., complete.

Wiring with 2 x 2.5 sqmm PVC un Sheated seal cable of 650 v grade in suitable PVC rigid pipe on wall and ceiling with PVC accessories and with T.W switch box with pointing of suitable colour for open / concealed PVC LIGHT POINT with continuos earth wire SD-18

Wiring with 2 x 2.5 sqmm PVC un sheated seal cable of 650 v grade in suitable PVC rigid pipe on wall and ceiling with PVC accessories and with T.W switch box with pointing of suitable colour for open / concealed PVC PLUG POINT with continuos earth wire SD - 36

Supply & Fixing of single box type 4' x 40w Tube light fitting complete with copper choke and condensor with TW round blocks on wall or ceiling with Flu. Tube with PVC unsheathed leads from terminals to the fitting.

supply and fixing of 1200 mm ceiling fan with Regulater and 1.0m down Rod

GST Amount for providing Service to Government Contract Works for the above Construction Works. { GST Amount is the Total GST Amount for total overall quoted amount above this row in column "BB" for all works in this package}

R.S. Rajiv Gandhi (BID ID -1338048)