SPL REPAIR TO VARIOUS INTERNAL ROAD AT HISAR MIL STN UNDER GE HISAR

Amount

Repair to pot holes of any depth, not exc 1 Sqm each including sweeping free from dust and mud, or water, scoring sunken surfaces in roads, cutting around edges to at least 25mm in depth, making good by filling in screened and graded road metal watering and well ramming (including supply of road metal) complete all as specified and directed.

Scarifying or Picking graveled macadam or bituminous macadam surface in area n.exc 400 Sqm, exc 50mm and n exc 100mm deep complete all as specified and directed.

M&L for 75mm thick (compacted thickness) WBM with granite, trap or basalt coarse agg of grading 2 (63 to 40mm size) or of grading 3 (50 to 20mm size) spread, rolled and consolidated to gradient and camber required complete all as specified and directed.

M&L premix bitumen macadam with binder content 4% of bitumen design mix (paving bitumen VG-30 grade) by the weight of total mix laid, rolled and compacted to required gradient and camber (consolidated thickness 75mm or less) with 8 to 12 tonne power road roller complete all as specified and directed.

Preparation of black top surface by brushing with wire brushes for removing caked mud etc sweeping with brooms and finally fanning the cleaned surface with air compressor to remove loose dirt etc complete all as specified and directed.

M&L applying evenly a priming tack coat @ 5 kgs per 10 Sqm with paving bitumen VG-10 complete all as specified and directed.

M&L for preparing unsurfaced WBM by brushing with steel wire brushes for removing caked mud etc sweeping with brooms finally fanning the cleaned surfaces with air compressor to remove all loose dirt etc and applying evenly priming tack coat with paving bitumen VG-10 grade @ 10 Kgs per 10 Sqm complete all as specified and directed.

M&L for bituminous premix semi dense asphaltic concrete design mix 40mm consolidate thickness with 5.5% binder content paving bitumen VG-30 by weight of total mix and stone dust using as filler material laid with mechanical paver rolled and compacted with 8 to 12 tonne power roller to required camber and gradient complete all as specified and directed.

M&L for bituminous premix semi dense asphaltic concrete design mix 30mm consolidate thickness with 5.5% binder content paving bitumen VG-30 by weight of total mix and stone dust using as filler material laid with mechanical paver rolled and compacted with 8 to 12 tonne power roller to required camber and gradient complete all as specified and directed. Notes for item No 4, 8 & 9 :- (i) Premix concrete shall be mixed in hot mix plant, transported from plant to work site and laid / spread by means of mechanical paver. (ii) Filler for semi dense asphaltic concrete shall be stone dust @2% of total mix. (iii) Contractor shall quote his rate on the basis of binder as mentioned in this item. If there is any variation in the actual binder content used as per design mix approved by GE, the rate shall be adjusted @ ₹ 36.00 per Kg of binder used. However no price adjustment shall be made if the binder content works out to more than as specified in said items. (iv) Work shall be executed as per design mix approved by GE.

Demolition of cement concrete (unreinforced) in ground floors and pavings n.exc 15cm thickness (below or above ground level) complete all as specified and directed.

M&L for 75mm thick PCC (1:4:8) type D-2 using 40mm graded stone aggregate as in Sub base of ground floors complete all as specified and directed.

M&L for 60mm thick Machine pressed factory made Precast cement concrete interlocking paver blocks with using grey cement and no pigment of Grade M-35 confirming to IS 15658-2006 of any size & shape as directed such as I-shape, Uni, Octagonal, Three-X, Dumble, Zig Zag etc, with filling of joint with dry screened sand complete all as specified and directed.

M&L sand filling / cushioning and joint filling with sand complete all as specified and directed.

M&L for factory precast cement concrete 1:2:4 (type B-1) using 20mm graded stone aggregate in kerb stone, string courses, coping, kneelers, apex stones, etc (of any section indicated) with plain fair faces, including chamfers, weathering, throating etc and setting in CM 1:4 complete with joints to match complete all as specified and directed.

M&L for preparation of new / old surfaces providing and making lines, dashes, arrows, letters etc on road with hot applied thermoplastic road marking paint min 2.50 mm thick complete in all respects such as furnishing all labour, material, tool, Equipment incl all incidental cost necessary to carryout the work at site conforming to technical specification clause no.803 of MORTH specifications 4th Revision of 2001/Latest edition complete all as specified and directed.

S&F in repair solar powered road studs aluminium alloy shell & polycarbonate facing size 125 mm x 125 mm x 25 mm (Shank 60 mm), with six super bright LEDs for viewing distance upto 1000m, including Ni-cd rechargeable battery (1.2V/1600MA) and high efficiency solar panel for continual performance, colour of LED Red, yellow or white, (as approved) complete fixing as per manufacturers instruction complete all as specified and directed. Make : OSCAR Model No OS-810 or equivalent of Dark Eye/ Sapphire/ 3M

AP BUILDERS

SARVJEET ENTERPRISES

M/S RAJINDER SINGH

P.K. ENTERPRISES

M/S BUDH RAM SHARMA