WBPWD/AE/AESD-I /eNIQ-09/2024-25

Amount

Distribution wiring in 2 x 22/0.3 (1.5 sqmm) single core stranded 'FR' PVC insulated & unsheathed copper wire (Finoex/Havells/RR/Polycab) in 20mm size PVC rigid conduit 'FR' (Precision make-HMS/MMS), with 1x22/0.3 (1.5 sqmm) single core stranded 'FR' PVC insulated & unsheathed copper wire for ECC, to light/fan/call bell points with Piano Key type switch(Anchor Make) fixed on MS CRC sheet metal (16 SWG) switch board cum JB on wall complete with 2 no. suitable size “Ph & N” copper bar incl. laminated bakelite/Perspex (wall matching color) top cover 3 mm thick and incl. 175mmx100mmx65mm inspection box, making earthing attachment,incl. painting the MS box and mending good the damages to original finish. i).[Average run 8 mtr]

ii).[Average run 10 mtr]

Supply & Fixing of 2plate PVC Ceiling rose with necy flexible cord & necy connection.(Anchor Make)

Supply & Fixing angular batten holder (Anchor) on 75mm dia PVC round block / round bakelite on wall/ceiling.

Fixing only LED tube light fitting suspended 25 cm bellow the ceiling with 2 No. 20 mm dia EI conduit (14 SWG) supports incl. S&F E.I conduit, ball socket/socket type ceiling plate and connecting the length of PVC insulated wire and necy enamel painting etc. as required by 2x24/0.20 mm (1.5sqmm) flexible copper wire of 1.10 mt. length.

Fixing only single /twin LED tube light fitting complete with all accessories directly on wall/ceiling/HW round block and suitable size of MS fastener & flexible cord.

Supply and delivery of commercial type indoor mounting rail for SINGLE LED tube light frame [PHILIPS-TMC-501-P-1XT-LED-P3241/Eqv Jaquar Model/EIC Approved] complete with all accessories.

Supply and delivery of commercial type indoor mounting rail for TWIN LED tube light frame[PHILIPS-TMC-501-P-2XT-LED-P3242/Eqv Jaquar Model/EIC Approved] complete with all accessories.

supply and delivery of 1No. 4', 18W LED Tube]. [Philips: Master Led Tube 1200mm 18W-865 T8 IND -2100 lumen/ Eqv Jaquar Model/EIC Approved] for above tube frame fittings.

S/F LED Lamp (B22 CDL) In the existing Holders. (Philips Ace Saver/Havells make). i). 9 Watt.

ii). 12 Watt.

Supply & Delivery of 4 Blade 450mm Pedestal Fan.(EPC Make)

Supply of following spec,rpm-1420,230volt,metal body heavy duty exaust fan complete with all accessories.[havells heavy duty Ventil Air-DB/EIC Approved]. i). 9",230V,50Hz,1420rpm.

Fixing only AC Exhaust Fan for Toilet use of 230mm/ 300mm sweep after making hole in wall and making good the damages and smooth cement finish etc. as practicable as possible and providing necessary length of PVC insulated wire and making necy. connection with flexible cord. i). 9"(inch),230mm.

Supply & Fixing louver shutter on wall with necy. bolts & nuts (6 mm dia x 62 mm long) i).For 9"(inch),230mm Ex-Fan.

Supply and Delivery of 230V, 50Hz,1400 rpm AC Air bracket Air circulator 4 Blade wall Fan with necy. Allied all items. 450mm(18inch),85W.[EPC Make].

Fixing only cabin fan on wall/ceiling by S&F rag bolts, nuts & washers (6 mm dia x 62 mm long) or as reqd. incl. S&F 24/0.20 PVC insulated flexible copper wire 0.5 mt. length.

Distribution wiring in 1.1 KV single core stranded 'FR' PVC insulated & unsheathed copper wire (Finolex/Havells/Polycab / RR) in 25/32mm size PVC Rigid Conduit 'FR' (Precision make-HMS/MMS) incl. necy. fittings as required. [E9:C:1:d1+E16:7b] 4x80/0.4 (10 sqmm) + 2x84/0.3 (6 sqmm) as ECC.

Distribution wiring in 1.1 KV single core stranded 'FR' PVC insulated & unsheathed copper wire (Finolex/Havells/Polycab / RR) in 25mm size PVC Rigid Conduit 'FR' (Precision make-HMS/MMS) incl. necy. fittings as required. 2 x 84/0.3 (6 sqmm) + 1 x 56/0.3 (4 sqmm) ECC.

2x36/0.3 (2.5 sqmm) + 1 x 22/0.3 (1.5 sqmm) ECC

2 x 22/0.3 (1.5 sqmm) + 1 x 22/0.3 (1.5 sqmm) ECC

Supply and fixing double door SPN-MCB DB housing for DP-MCBs as incomer and SP-MCBs ('C'-curve,10kA,6A to16A) as outgoing with IP-43 protection, concealed in wall after cutting the wall & mending good the damages to original finish & necy. wall matching paint as required or total establishment on angle iron frame on wall incl. inter connection with suitable size of copper wire and neutral link & provision for earthing attachment. [D9:13] #[Make : Legrand Ekinox/ABB/Eqv Make]# i).2+12 way Enclosure...

Supplying and fixing 240/415V, following rating MCCBs & MCBs (Legrand Make) of Breaking capacity 10kA for MCBs & 35kA for MCCBs & "C"characteristics on existing din rail for newly installed DBs and necessary connection as required. #[Make: Legrand/ABB/Eqv. Make]# i).40A DP MCB Isolator

ii).6-32A(10kA) SPMCBs.

Finishing of the PVC insulated wire ends by socketting with pin/ring type copper sockets and insulated tapes etc., includingsupplying sockets, tapes................. i).1.5 sq mm.

ii).2.5 sq mm.

iii).4.0 sq mm.

iv).6.0 sq mm.

v).10.0 sq mm.

Supply & Fixing 240 V, 6A, plug socket with separate 6 A Piano key type switch (Brand approved by EIC) on sheet metal switch board embedded in wall incl. S & F 150x100x65mm MS (16SWG) switch board and bakelite/perspex top cover of 3mm thick by Brass screws after making housing for switch by cutting bakelite/perspex cover and making necessary connections as required.

Supply & Fixing 240 V, 2 Nos. 6A, plug socket with separate 2Nos. 6 A Piano key type switch (Brand approved by EIC) on sheet metal switch board embedded in wall incl. S & F 175x100x65mm MS (16SWG) switch board & bakelite/ perspex top cover of 3mm thick by Brass screws after making housing for switch by cutting bakelite/perspex cover and making necessary connections as required.

Supply & Fixing 240 V, 20A, plug socket with separate 20 A Piano key type switch (Brand approved by EIC) on sheet metal switch board embedded in wall incl. S & F 150x100x65mm MS (16SWG) switch board and bakelite/perspex top cover of 3mm thick by Brass screws after making housing for switch by cutting bakelite/perspex cover and making necessary connections as required.

Supply & Fixing 240 V, 3 nos. 6A, & 1 no. 20A plug socket with separate 3 nos. 6 A & 1 no. 20A Piano key type switch, indicator & 20A switch type SP MCB (Brand approved by EIC) on sheet metal switch board embedded in wall incl. S & F 240x200x 65mm MS (16SWG) switch board and bakelite/perspex top cover of 3mm thick by Brass screws after making housing for switch by cutting bakelite/perspex cover and making neccy connections as required

Supply & Delivery of 15A Socket & Switch (SS) Combine PVC switch Box & top Cover compact set.

Supply & Delivery of 15A Socket & Switch (SS) Combine PVC switch top cover only incl Switch socket set. (Except back facia box)

M/S GRACIOUS ENGINEERING PROJECT (BID ID -5775962)

M/S Sonomax Electrical (BID ID -5777573)