PROVISION OF STORAGE SHED AT JAL VIHAR, PROVN OF FILLING OF GAPS BETWEEN ROOF AND WALL OF BLDG NO P-281 TO P-283 AND ADDN / ALTN AND SPECIAL REPAIRS TO SECURITY WALL AT MANEKSHAW ENCLAVE UNDER GE HADDO

Amount

Demolition of Precast cement concrete block walling built in CM or Cement lime Mortar complete all as specified and as directed.

M&L for pre-cast cement concrete block masonry with solid blocks made up of (1:3:6) type C1 (using 20mm graded stone aggregate), masonry exceeding 10cm in width and setting in cement mortar (1:4) complete all as specified and directed.

M&L for rendering 15mm thick in CM (1:4) on fair faces of brick work or concrete, surfaces finished even and smooth without using extra cement complete all as specified and as directed.

M&L for preparation of newly plastered wall surfaces and applying two or more coats of 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10 sqm complete all as specified and as directed

M&L for 10mm thick in CM (1:6) on fair faces of brick work or concrete surfaces finished even and smooth without using extra cement complete all as specified and as directed.

M&L for preparation of newly plastered wall surfaces and applying with 1mm average thick wall care putty and applying two coats of oil bound distemper over one coat of primer including leveling the surface which undulation found with cement putty etc complete all as specified and directed.

Note : Sl Item Nos. 01 to 06 here in before shall be carried out at 3rd Storey of Bldg (for quantities to the extent of [Item No. 1 : 10 Cum], [Item No.2 : 20 Cum], [Item No.3 : 120 Sqm], [Item No.4 : 120 Sqm], [Item No.5 : 95 Sqm] & [Item No.6 : 95 Sqm] respectively). Hence rates shall be quoted accordingly keeping in view of necessary arrangements such as scaffolding work etc in one job only (At Bldg No. P-281 to P-283 )

Demolition of reinforced cement concrete of any description and in any position not otherwise specifically provided for etc complete all as specified and as directed.

Rough Excavation n. exc 1.5m deep and getting out in hard/dense soil complete all as specified and directed

Excavation in trenches n. exc 1.5m wide and n. exc 1.5m in depth in hard/dense soil for foundation, etc or for shafts, wells, cesspits, manholes, pierholes, etc n. exc 10 Sqm on plan and getting out complete all as specified and directed

Returning, filling in hard/dense soil including spreading, levelling, watering and well ramming in layers not exceeding 25 cm thick complete all as specified and as directed.

Removing excavated material (any type of soils) to a distance n. exc 50m and depositing where directed at a level n. exc 1.5m above the starting point complete all as specified and directed

M&L for PCC (1:4:8) type D2 (using 40mm graded stone aggregate) as in foundation or mass concrete complete all as specified and as directed.

M&L for reinforced cement concrete (Design mix) M-30 (using 20mm graded stone aggregate) as in foundations, including rafts, footings, foundation beams, plinth beams, bases for columns etc., basement slabs, under-reamed piles and mass concrete complete all as specified and as directed.

M & L for Reinforced cement concrete design mix M-30 ( using 20mm graded crushed stone aggregate) in coloumns,pillars, piers, posts and struts complete all as specified and as directed.

M & L for Reinforced cement concrete design mix M-30 ( using 20mm graded crushed stone aggregate) in beams, cantilevers, bressumers,lintels over 1.5m span complete all as specified and as directed.

M&L for use and waste of formwork to sides of concrete foundations, footings, bases of columns, raft and raft beams, sides and soffits (if any) of foundation and plinth beams and similar work vertical or to batter for rough finished surfaces of concrete flat complete all as specified and as directed.

M&L for formwork for rough finished surface of square, rectangular, or triangular surface to side of pillar, posts, struts, piers, column and stanchions complete all as specified and directed.

M&L for formwork to side and soffits of floor or room beam, beam haunchings, girders, bressummers, lintels, cantilevers, shelves including supports, overhangs etc also splays between floors and beams etc in rough finished flat surface complete all as specified and directed.

S&F TMT steel bars 10mm dia and over, cut to length, bent to shape required, including cracking bending spirally for hooping for columns/beams, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia complete all as spcified and directed.

M&L for Mild steel TMT bars 6mm to 8mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns/beams, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified and as directed.

Taking down cement plaster of any description on brick or stone walls etc., including raking out joints, hacking for key, scrubbing down with water etc., and removal of debris to outside MD land complete all as specified and as directed.

M&L for complete removal of existing treatment on plastered wall surface and applying two or more coats of 100% premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/10 Sqm over and including priming coat of exterior primer applied @ 0.90 litre/10 Sqm complete all as specified and directed

Dismantling of wrought iron or mild steel work and structural steel work of any description ot otherwise provided for complete all as specified and as directed.

M&L for mild steel work as posts and struts in fencing including cutting tops as required drilling holes, notching for wires etc and similar works conforming to Fe-290, Gde E-165 complete all as specified and directed.

M&L framed work such as grills, gratings etc with ends of bars shouldered and / or riveted, or forged into spikes, framed guard bars, barred iron doors, ladders, framed balusters, walk ways, railings, framework of water tanks and similar works conforming to Fe-290, Gde E-165 complete all as specified and directed.

M&L for preparation of new steel and iron surfaces of any description, not otherwise described, over 10cm in width or girth and applying two coats of synthetic enamel paint of first quality over a coat of red oxide zinc chrome primer complete all as specified and as directed.

S&F Galvanised. 2 strand, steel barbed wire 2.24mm dia barbed with 2mm dia barbs at 75mm spacings and straining and fixing to any type of standard rails straining bolts, including, securing or tying at crossings with and provision of galvanised mild steel wire, staples or steel pins, etc. as directed (each line wire to be measured)

Dismantling ceiling boards / wall cladding (fibre, pulp, insulation, etc.) or insulation boards/slabs/blankets, any thickness, including cover fillets and grid complete all as specified and as directed.

S&F for Anodoised aluminium snap grid 605 x 605mm frame work for false ceiling including hangers 6mm dia, GI (upto 1200mm length) adjusting level fixed to roof slabs by means of ceiling cleats made out of GI flat 40 x 3mm size 60mm long and expansion hold fastners 12.5mm dia, 40mm long complete all as specified and as directed.

Fixing only anodised aluminium snap grid 605 x 605mm frame work for false ceiling complete all as specified and directed.

M&L for 4mm thick non asbestos fibre cement building design board of size 605 x 605mm fixed or laid to aluminium grid work with screws and including preparation of surface with two coats of oil bound distemper complete all as specified and directed.

Fixing only 4mm thick non asbestos fibre cement building design board of size 605 x 605mm fixed or laid to aluminium grid work with screws and including preparation of surface with one coat of oil bound distemper complete all as specified and directed.

M&L for surface excavation not exceeding 30cm deep and averaging 15cm deep and getting out in hard / dense soil complete all as specified and directed.

M&L for hardcore of gauge n exc. 63 mm of broken stone boulders, deposited, spread and levelled in layers n exc. 15 cm thick, watered and rammed to a true surface.

M&L for PCC type D-2, 1:4:8 (using 40mm graded aggregate) 75mm thick as in sub base complete all as specified and as directed

M&L for providing 40mm thick PCC 1:2:4 type B0 (using 12.5mm graded aggregate) as in floor / paving etc including finishing cement concrete surface even and smooth with using extra cement complete all as specified and directed.

S&F for chequered cement concrete tiles 30cmx30cmx25mm thick set jointed with grey cement and pigment and jointed in neat cement slurry and pointed in white or coloured cement to match the surface of tiles as in floor over and including 20 mm thick screed bed in CM(1:4) etc complete all as specified and as directed.

Excavating in post holes (or similar holes) in hard/dense soil each not exceeding 0.5 Cum, getting out, returning, filling in and ramming earth or broken rubble mixed with earth around, in layers not exceeding 25 cm watering and removing surplus soil to a distance not exceeding 50 metres and making good disturbed surfaces complete all as specified and as directed.

M&L for Cement concrete PCC (1:2:4) Type B1 (using 20 mm graded aggregate) as in foundation of posts, railing and similar work complete all as specified and directed.

S&F Rolled mild steel compound girders and stanchions, lattice girders, aerial masts, staging for water tanks and the like including caps, bases, splices etc built up from two or more beam or channel sections or angles with plates including all lattice bars, stiffeners, gusset plates conforming to Fe-410-W (Gde E-250) quality-A complete all as specified and directed.

M&L for Rolled mild steel roof trusses (framed), trussed, purlins, crane gantries, rails and fastenings and heavy bracket framing (beam, tee, angle, channel or flat sections) including distance pieces, cleats etc., conforming to Fe-410-W (Gde E-250) Quality 'A' complete all as specified and as directed.

S&F for Rolled mild steel plates (plain or chequered) channels, square cut or notched (ordinary and counter sunk) forming holes, without any attachment conforming to Fe-410-W (Gde E-250) Quality -A complete all as specified and as directed

S&F mild steel screw bolts (machine made) with hexagonal or square heads at one end and screwed the other, or screwed both ends, each screwed end to be fitted with washers and one hexagonal or square nut, dia of shank 11 to 15mm and length of bolt exceeding 5 cm but not exceeding 10cm complete all as specified and as directed.

M&L for 10mm dia mild steel round bars cut to length, bent to shape required including cranking, bending spirally for hoping for columns, hooking ends and binding with MS post of grade Fe-410-W (Gde-E-250) quality 'A' or Fe 290 (Gde-E-165) complete all as specified and as directed.

M&L for mild steel galvanised PVC coated chain link fencing, 3.15mm nominal dia of GI wire, 1.4mm thick PVC coating and average area of aperture 25 Sqcm with weight of chain link not less than 2.0 Kg/Sqm complete all as specified and as directed.

S&F for pre painted Galvalume aluminium zinc coating GI based corrugated steel sheet 0.50mm thick of any colour having tensile strength of 550Mpa as in roof covering/cladding to wall fixed with self tapping screws complete all as specified and directed.

S&F 2mm thick fibre glass reinforced translucent corrugated sheeting with two corrugations side lap fixed with coach screw and washer in roof, wall etc all as specified and directed.

S&F for pre painted Galvalume aluminium zinc coating GI based plain steel sheet 0.50mm thick of any colour having tensile strength of 550Mpa as in roof covering/cladding to wall, ridge etc fixed with self tapping screws complete all as specified and directed.

M&L for Aluminium wind tie of any size fixed with self tapping screws of size 50/75mm with integral EPDM washer in roof covering etc fixed with self tapping screws as specified.

M&L for Point wiring complete with 1.5 Sqmm (nominal area) single core, PVC insulated unsheathed, FRLS cable, 1100 volts grade, multistranded copper conductor (with colour coding of Red/Blue/Yellow for phase and Black for neutral), drawn through and including concealed /on surface as possible rigid non metallic PVC conduits (medium grade) of suitable size (not less than 25mm) and accessories in/on walls/ceilings etc., including provision of PVC insulated 1.5 Sqmm FRLS cable with copper conductor green in colour for earth continuity and connected to common earth dolly and sunk in CI boxes/pressed steel terminal boxes 60mm deep made out of 1.6mm thick MS sheet duly painted with two coats of anti-corrosive paint outside and with two coats of aluminium paint inside and laminated sheet cover of 3mm thick on top for housing the switches, socket outlet etc, all as specified and as directed for the following :-

ONE LIGHT/FAN point controlled by one, one way 5 Amps switch.

TWO LIGHT point controlled by one, one way 5 Amps switch.

ONE 5A SOCKET OUTLET point controlled by one, one way 5 Amps switch on independent board.

ONE 5A SOCKET OUTLET point controlled by one, one way 5 Amps switch on same board.

All as per item No. 50.00 above but point wiring with two single core 4.0 Sqmm size cables and one 4.0 Sqmm green colour cable as earth continuity conductor for one 6 pin 16 Amps socket outlet on independent board.

S&F switch piano, flush type, single pole, one way, 6 Amps, 240 volts complete all as specified and as directed. Make : Anchor / Cona/ Legrand

S&F switch piano, flush type, single pole, one way, 16 Amps, 240 volts complete all as specified and as directed. Make : Anchor / Cona/ Legrand

S&F socket outlet, 2-in-1, 3 pin, 6A, flush type, universal, 240 volts complete all as specified and as directed. Make : Anchor / Cona/ Legrand

S&F socket outlet, 2-in-1, 3 pin, 16A, flush type, universal, 240 volts complete all as specified and as directed. Make : Anchor / Cona/ Legrand

S&F stepped type electronic fan regulator flush type on the existing phenolic laminated sheet etc. as reqd complete all as specified. Make:Roma (Anchor)/Legrand/Simens/Havells

S&F and testing surface tube light fittings LED 20 watts 4 feet including all accessories and fixing arrangements for fixing the light fitting complete all as specified and as directed. Make : Luker Cat Part No : LT5M20 or equivalent to CG/Philips/Havells/ Luker

S&F BLDC 5 Star rated ceiling fan metallic body ISI marked 1200mm sweep, 220V AC, 50 Hz complete with all accessories complete all as specified and as directed. Make : CG Cat Part No : ENERGION Riviera with out remote 32 watt or equivalent make of Havells/ Orient / Usha/ Bajaj

S&F wall mounting Fan 400mm sweep, 2100 RPM including all fixing arrangement complete all as specified and as directed by Engineer-in-Charge. Make : CG Model No : 400 mm TORPEDO (HS) or equivalent make in Eva / Havells / Usha/ Orient

Supply and fixing new GI brackets of GI pipe light grade of size 25mm dia including nuts bolts and washers for budding security light all as specified and as directed.

S & F 30 Watts LED building security light fittings are made up of pressure die cast aluminium housing powder coated graphite grey and toughened glass and high power LED's with secondary optics and IP65 protection including necessary fixing arrangements as per site requirements complete all as specified and as directed. Make :- Luker Model No. LSTE-30 or equivalent to Havells/Philips/CG

M&L for Sub main wiring complete with two runs (1P+1N) of 4.0 Sqmm single core, PVC insulated unsheathed, FRLS cable, 1100 volts grade, multistranded copper conductor (with colour coding of Red/Blue/Yellow for phase and Black for neutral) and one run of 4.0 Sqmm single core, PVC insulated unsheathed, FRLS cable, 1100 volts grade, multistranded copper conductor as earth wire green in colour including lugs, drawn through and including 25mm dia PVC conduit and conduit accessories concealed in wall/ceiling/roof/ floor complete all as specified and as directed. NOTE: Two runs of 4.0 Sqm copper conductor, One run of 4.0 Sqmm copper conductor as earth wire and one run of PVC casing and capping / PVC conduit shall be measured as one unit length.

S&F SPN DB sheet metal enclosure double door suitable (IP-43) protection 6 way with 200 Amps rated standard bus bar of suitable size plate and common neutral link all enclosed in standard sheet flush mounting type factory fabricated complete all as specified and directed. Make : Indo Asian / Havells / L&T

S&F MCB SPN 32 Amps (`C’ series) having current rating 10 KA complete all as specified and directed Make : Indo Asian / Havells/L&T / Legrand

S&F MCB, single pole 6 to 32 Amps, "C" series, having current rating 10 KA complete all as specified and as directed. MAKE: C&S/ Indo Asian/Havells/L&T

Supply, laying,testing and commissioning of LT XLPE insulated armoured heavy duty electric aluminium conductor cable 1100 volt grade of cross section 10 sq mm 2 core (laid on floor/Roof/wall in proper saddling all as specified and directed

Supply and laying/fixing in trenches or in cable ducts or clamping on wall or any place DWC HDPE pipe of size 50 mm(OD) x 38mm (ID) along with connected accessories like couplers.bends,end caps etc. for LT cable protection all as specified and directed.

M&L for earthing complete with GI earth plate electrode of size 600mmx600mmx6.15mm thick buried directly in ground (earth pit not less than 2.25m deep below the normal ground level) with top edge of the earth plate not less than 1.5m below normal ground level connected to 4mm dia GI earth wire as earth lead connected by means of bolts, nuts, washers and check nuts made out of galvanised iron or steel all as shown on electrical plate No. 3 of SSR Part-I connected to common earth dolly including testing on completion complete all as specified and directed. NOTES: (1) The unit rate shall also include for earth work in any type of soil, PCC (1:3:6) type C1 chamber, pre-cast RCC (1:2:4) type B-1 using 20mm graded stone aggregate cover 50mm thick reinforced with TMT bars 8mm dia @ 100mm c/c both ways, funnel with watering pipe 20mm dia medium grade, GI protection pipe light grade 20mm dia and wire mesh complete in addition to item No. 1(a) to (e) of preamble (notes) under sub-heading earthing, specified on Sl. Page Nos. 422 & 423 of SSR Part-II. (2) Earthing lead and GI protection pipe beyond 7.5m will be measured and paid separately.

M/s K Moorthi

CHANDER SEKER ENTERPRISE

M/s Ramesh Lal

DEEPAK AGENCIES

Reliance Sales Agency

Bismi Builders & Enterprises

SKV Engineering

P Babu