REPAIR AND PAINTING OF STEEL FURNITURE FD MAP OF OMQs SMQs SINGLE ACCN AT AFS CHAKERI KANPUR

Amount

Almirah large/Med steel with shelves( FD 1031 & 1032) :-

Taking out existing unserviceable lock almirah large/medium steel and S&F of new lock of six leavers of existing shape & size with duplicate keys complete all as specified and directed.

Taking out broken/damaged handle of almirah large/med steel and S&F of new handle of mild steel chromium plated of existing shape all as specified and directed.

Taking down existing unserviceable shelf of almirah large steel and S&F of new shelf made of 1mm thick mild steel of existing shape and size complete all as specified on drawing and directed.

All as per item 1.03 above but shelf of almirah medium steel

Taking out old unserviceable door hinge from almirah large/medium steel and S&F of new door hinge mild steel 75/80 mm long complete all as specified and directed.

Taking down unserviceable locking device & rod set from almirah large steel and S&F of new locking device & rod set of existing shape and size complete all as specified on drawing and directed.

All as per item 1.06 above but locking device & rod set of almirah medium steel

Dismantling of unserviceable leg of almirah large steel and S&F of new leg made of 1mm thick mild steel sheet of existing shape and size complete all as specified on drawing and directed.

All as per item 1.08 but leg of almirah medium steel.

Taking out unserviceable lock from almirah large/medium steel any shape and size as per trade pattern and S&F of new lock matching with existing shape & size with duplicate key as approved by GE/Engr-In-Charge.

M&L for painting to the following items by spraying on both side (outer and inner surfaces) including legs, door shutter, partition,drawers and shelves with one coat of OG synthetic enamel paint (2nd grade quality) including preparation of old painted surfaces & applying ready made putty wherever required to fill up the cavities complete all as specified and as directed and shown on drg

Almirah Large Steel(FD 1031 / FD -1033 & FD/E6/MAP/18)

Almirah Med steel (FD 1032)/MAP

Chair Varandah(FD 256 & 359 ):-

Removing old U/S canning of chair varandah and S&F re-canning of Chair Varandah mat pattern with 4 to 5 mm wide 0.5 mm thick half round new plastic cane cream/white colour confirming to sample Kept in furniture Yard as specified, shown on drg and directed by Engr-in-Charge

Removing of U/S shoe and S&F new PVC hard shoes to chair varandah all as directed by Engr-in-Charge

M & L for Painting of Chair Varandah with two coats of white synthetic enamel paint after preparing of surfaces by scraping with abrasive cloth complete all as specified in drg and directed by Engr-in-Charge

Table Office Officer steel(FD 1003):-

Removing old u/s top of table office officer steel and S&F of new top of Pre- laminated MDF board 18 mm thick veneer teak face one side and balancing white on other face, exterior grade with and including 4mm thick teak wood beading around the top complete all as specified and directed.

Taking out U/S drawer of table office officer steel and S&F new drawer made of 1mm thick MS sheet ,rest all as per drg and directed by Engr –in-charge.

Removing U/S damaged leg and S & F New leg made of MS Sheet 1.6mm thick, 25mm square pipe all as per drg and directed by Engr-in-Charge

Removing of U/S shoe and S&F new PVC hard shoe to table office officer steel all as directed by Engr-in-Charge

Taking out U/S lock from the drawers/mobile padestal unit of Table officer/ executive make Godrej/Fetherlite / methodex or any other make any shape and any size and S&F new lock as per trade pattren matching with existing shape and size approved quality complete all as specified and directed by Engr-in-charge.

Taking out U/S telescopic channel from the drawers/mobile padestal unit of Table officer/executive make Godrej/Fetherlite/methodex or any other make any shape and any size and S&F new channel as per trade pattren matching with existing shape and size approved quality complete all as specified and directed by Engr-in-charge.

Taking out unserviceable lock from table office officer steel and S&F of new lock matching with existing shape & size with duplicate key as approved by GE/Engr-In-Charge .

M & L for Painting of Table office officer steel with two coats of OG synthetic enamel paint after preparing of surfaces by scraping with abrasive cloth complete all as specified shown on drg and directed by Engr-in-Charge

Table office Clk steel(FD 1004):-

Removing old u/s top of table office clk steel and S&F of new top of Pre- laminated MDF board 18 mm thick veneer teak face one side and balancing white on other face, exterior grade with and including 4mm thick teak wood beading around the top complete all as specified, shown on drg and directed.

Taking out U/S drawer of table office clk steel and S&F new drawer made of 1mm thick MS sheet complete all as specified, shown on drg and directed.

Removing U/S damaged leg and S & F New leg made of 25mm square pipe with MS sheet 1.6mm thick complete all as specified, shown on drg and directed.

Removing of U/S shoe and S&F new PVC hard shoe to table office clk steel complete all as specified, shown on drg and directed.

Taking out unserviceable lock from table office clk steel and S&F of new lock matching with existing shape & size with duplicate key complete all as specified, shown on drg and directed.

M & L for Painting of Table office clk steel with two coats of OG synthetic enamel paint after preparing of surfaces by scraping with abrasive cloth of Table office clk steel complete all as specified, shown on drg and directed.

Repair to table 900x600x760mm with /without drawer steel (FD 1008 &1007):-

M&L for repair to table 900x600x760mm with/without drawer steel by welding of conduit frame wherever required including strengthening etc removing old/unsv worn out existing top and S&F new top of Pre- laminated MDF board 18 mm thick veneer teak face one side and balancing white on other face, exterior grade with and including 4mm thick teak wood beading around the top complete all as specified, shown on drg and directed.

Removing U/S damaged leg and S & F New leg made of 25mm square pipe with MS sheet 1.6mm thick complete all as specified, shown on drg and directed.

All as per item No 5.02 here in before but short rail.

All as per item No 5.02 above but long rail.

Removing of unserviceable drawer and S & F New drawer with1.00 mm thick mild steel sheet , same shape and size complete all as specified, shown on drg and directed.

All as per item No 5.02 here in before but stiffener.

Removing old unsv rubber shoe and S&F new rubber shoe in each table complete all as specified, shown on drg and directed.

M & L for Painting of table steel 900x600x760mm with two coats of OG synthetic enamel paint after preparing of surfaces by scraping with abrasive cloth complete all as specified, shown on drg and directed.

Table Steel 900x900x760mm(FD 1009 & TP):-

Taking out old U/S existing top and S&F new top of Pre- laminated MDF board 18 mm thick veneer teak face one side and balancing white on other face, exterior grade with and including 4mm thick teak wood beading around the top complete all as specified, shown on drg and directed.

S & F long cross stiffener of 25 mm Square MS tube made with 1.6 mm thick MS sheet , 8 inch below from top frame by welding complete all as specified, shown on drg and directed.

Removing of U/S PVC Shoe of Table Steel 900x900x760 mm and S&F of new PVC shoe of the same shape and size complete all as specified, shown on drg and directed.

M & L for Painting of table steel 900x900x760mm with two coats of OG synthetic enamel paint after preparing of surfaces by scraping with abrasive cloth complete all as specified, shown on drg and directed.

Chair CBA Steel /CBB Steel( FD 75(M):-

Removing of old existing U/S seat & back of chair CBA/CBB Steel and S&F new seat/back of seasoned sheesham wood duly Canned with ½ round plastic cane 2mm wide 0.4mm thick and border with 3.5mm wide 0.5mm thick for chair CBA /CBB steel complete all as specified, shown on drg and directed.

S&F new mild steel cleat of size 50 X 25 X3mm by welding to the frame in replacement of old U/S cleat complete of Chair CBA/CBB steel complete all as specified, shown on drg and directed.

Removing of old existing U/S cap and S&F new PVC cap for Chair CBA/CBB steel complete all as specified, shown on drg and directed.

Removing of U/S shoe and S&F new hard rubber shoe to Chair CBA/CBB steel with appropriate steel screw complete all as specified, shown on drg and directed.

Removing of old U/S arm and S&F new arm of seasoned sheesham wood with steel screw appropriate size complete of Chair CBA steel with Arms complete all as specified, shown on drg and directed.

M & L for Painting of Chair CBA steel /CBB Steel with two coats of OG synthetic enamel paint after preparing of surfaces by scraping with abrasive cloth complete all as specified, shown on drg and directed.

Teapoy Verandah(FD 255):-

Taking out U/S top from Teapoy Verandah and S&F new top of Pre- laminated MDF board 18 mm thick veneer teak face one side and balancing white on other face, exterior grade with and including 4mm thick teak wood beading around the top & repairing the entire frame including welding if required complete all as specified, shown on drg and directed.

Taking out U/S rubber shoe from Teapoy Verandah and S&F new rubber shoe of best quality matching with the existing shape & size complete all as specified, shown on drg and directed.

S & F 25mm square tube of 1.6 mm thick MS sheet of 350 mm long welded with two legs making a stiffener both side of teapoy verandah and 750mm center stiffener welded with both side stiffeners of teapoy verandah complete all as specified, shown on drg and directed.

M & L for Painting of Teapoy Varandah with two coats of white synthetic enamel paint after preparing of surfaces by scraping with abrasive cloth complete all as specified, shown on drg and directed.

Table Computer (TP):- Taking out the old existing unserviceable following parts of computer table and S & F new parts of the same complete with the help of appropriate nuts, bolts and washers complete all as specified, shown on drg and directed.

Shelf

Drawer

Key board with slider

Caster Wheel

Chair computer (TP):- Taking out the old existing unservicable following parts of chair computer (TP) and S&F new parts of the same complete with the help of appropriate nuts, bolts and washers complete all as specified, shown on drg and directed.

Seat & Back

Coaster wheel

Chair revolving office officers high back/executive with PU arm (TP)

Taking out U/S caster wheel from any type of chair revolving high back executive and S&F new caster wheel of different type as per trade pattern matching with the existing shape & size as approved by Engr-in-charge

Taking out U/S tapestry/fabric cloth from seat & back of chair revolving high back executive and S&F new tapestry/fabric cloth of approved quality & shade including replacement of foam cushion and plywood etc complete all as directed by Engr-in-charge.

Taking out U/S hand rest from chair revolving high back executive and S&F new hand rest of different type as per trade pattern matching with the existing hand rest all as directed by Engr-in-charge

Taking out Hydrualic Assembly from Chair revolving office officer High back/executive and S&F new Hydrualic assembly different type as per trade pattern with the existing shape and size as directed by Engr-in-charge.

Shoe Rack steel(FD/MAP/02(R) ):-

Removing U/S shoe and S&F new PVC hard shoe all as directed by Engr-in-Charge

M & L for Painting of Shoe Rack Steel with two coats of Black synthetic enamel paint after preparing of surfaces by scraping with abrasivee cloth complete all as specified, shown on drg and directed.

Chair School with hand board (FD/E6/MAP/05) :-Taking out the old existing unserviceable following parts of Chair school with writing pad and PVC seat and S & F New parts of the same complete with the help of appropriate nuts, bolts and washers and as directed by Engr-in-charge .

Seat PVC

Writing Pad

M & L for Painting of Chair school with hand board with two coats of black synthetic enamel paint after preparing of surfaces by scraping with abrasive cloth complete all as specified, shown on drg and directed.

Charpoy GI Pipe ply top (FD 220) :-

Removing of unserviceable long rail from Charpoy GI Pipe and S & F new long rail made out of 32mm dia GI pipe medium grade complete all as specified, shown on drg and directed.

Removing of unserviceable short rail from charpoy GI pipe & making of two short rails obtained from item No 14.01 and fixing the same in charpoy including cutting threads on both ends, complete all as specified shown on drawing and directed by Engineer-in-Charge.

Removing of unserviceable leg from charpoy GI pipe & making two legs from short rails obtained from execution of item No 14.02 and fixing the same in charpoy including cutting , threading on one end and S&F clamps as per drawing for FMN set complete all as specified shown on drawing and directed by Engineer-in- Charge.

Removing old unserviceable 3 way GI elbow and S&F new three way elbow of 32 mm dia, ISI marked medium grade complete all as specified shown on drawings and as directed.

Removing old unserviceable GI check nut and S&F new GI check nut of 32 mm dia 6mm thick ISI marked complete all as specified, shown on drawings and as directed.

Removing of existing Ply top from GI charpoy ply top and tightening the frame, loose laying charpoys components i.e. check nuts, elbows, rails, legs etc and S&F 12mm thick ply wood sheet BWR grade with and including 10 Nos nuts bolt (GI) 75mm long 6mm dia with washer and painting of flat iron complete all as specified, shown on drawings and as directed.

M&L for welding of broken steel parts of various steel furniture by electric welding & welding up to 25mm consider a single point as and where required as specified and directed by Engr-in-charge

S B ENTERPRISES

Star Sofa House

SARGAM ENTERPRISES

m/s tripurari enterprises