Empanelment of Testing Laboratories for the testing of samples for development and Building works of Ghaziabad Development Authority

Amount

Cement OPC 33 Grade/43 Grade/53 Grade complete as per IS 269/8112/12269 for Chemical Analysis only

Cement OPC 33 Grade/43 Grade/53 Grade complete as per IS 269/8112/12269 for Physical Testing only

Cement PPC-Complete as per IS:1489 for Chemical Analysis only

Cement PPC-Complete as per IS:1489 for Physical Testing only

Compressive Strength of Concrete cube 3 Cubes

Compressive Strength of Brick after filling 5 Nos. bricks

Building Bricks as per IS:1077 (20 Bricks)

Glazed Tiles as per IS:777 Except Warpage ( 80 Tiles)

Tarrazo Tiles as per IS:1237 (Mosaic Tiles) (20 Tiles)

Chequered Cement concrete Tiles IS:13801 (20 Tiles)

Coarse Aggregate as per IS:383 (25 kg.)

Fine Aggregate as per IS:383 (20 Kg.)

Marble as per IS:1130/Kota (1' x 1')

Gypsum Plaster Board IS:2095 (1mx 1m)

Structural Granite IS:3316 (4 Slab)

Acid Resistant Tiles IS:4457 (20 Nos.)

Gypsum Agricultural Grade IS:6046 (500 gm)

White cement IS:8042 (10 Kg)

Ratio of Ingredients of Concrete (cement to total Aggregate) (5 Kg)

Ratio of Ingredients of Cement Mortar (2 kg)

Each Subsequent - Mix Design (Coarse Agg, Sand and Cement)

Hammer test for concrete (for 25 point) As per IS:13311

Tor Steel - Complete as per IS:1786 Chemical Analysis (1.0 Mtr.)

Tor Steel - Complete as per IS:1786 Physical Testing only (1.5 Mtr.)

G.I. Pipe as per IS:1239 (upto 100mm) (1.5 Mtr.)

G.I. Pipe Fittings

Water for construction purpose of IS:456 (2.00 Ltr.)

PVC pipe (with pressure test) IS:4985 (1.00 mtr)

PVC pipe (with out pressure) IS:4985 (1.00 mtr)

PVC Pipe Fittings

UPVC Pipe (as per specification)

UPVC Pipe Fittings

Cable/Wire IS:694 (15.00 Mtr.)

SCI pipe as per IS:1729 (1 Full Length)

G.I. Steel Barbed Wire IS:278 (5.00 Mtr.)

C.I. Pipe IS:1536 (upto 100mm) Except tensile (1 Length)

Identification of Wood + Moisture content (6 inch. length)

Flush Door Shutters per IS:2202 (Part I) (End immersion, Knife test & Glue adhesion only) (Full shutter)

Ply Board as per IS:303 (2X1.00 mtr)

Particle Board IS:3087 Except Tensile str. perpendicular to surface, accelerated water resistance (2X1.00 mtr)

Veneered Particle Board IS:3097 Except - Static Bending under sustained load (2X1.00 mtr)

M. D. F. Board for G. P. IS:12406 Except Tensile Strength Perpendicular to surface, Thermal conductivity, Internal Bond test (2X1.00 mtr)

Pre laminated Particle Board-IS 12823-90 Except Tensile Strength Perpendicular to surface before .& after ageing Resistance to abrasion— Abrasion Resistance in No. of revolutions (2X1.00 mtr)

Job mix formula for bitumen (Asphalt institute Manual MS-2)

Kerb stone IS:5758 (5 Nos)

GSB As per MORTH specification (30 Kg)

WMM As per MORTH specification (30 kg)

Soil investing test including CBR value, dry density/Moisture content (as per specification)

RCC pipe (as per specification)

Core cutting per core with testing (as per specification)

DGBM (as per Morth specification)

BC (as per Morth specification)

Bitumen concrete core (as per specification)

Bitumen (IS;15462, 73)

Admixture (as per specification)

M.S. Pipe (as per specification)

Bollard (as per specification)

Aluminum Section (as per specification)

Fixed frame Section (as per specification)

Open able pram shutter (as per specification)

CPVC pipe (as per specification)

CPVC Fitting (as per specification)

M.S. Angle & M.S. Flat (as per specification)

ACC Block (as per specification)

Fly ash bricks (as per specification)

Granite 18 mm thick (as per specification)

HDPE Pipe (as per specification)

Paver Block 80 mm/60 mm

M S Conduit Pipe

M S Plates (Different Thickness) IS 2062-2011

DWC Pipe (IS 16098 Part-2)

M/S GHAZIABAD TESTING LABORATORIES PVT LTD

Stellar Test House