Loading…
Tenderkart now works inside Claude and ChatGPT: search and analyse tenders right from your chat
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹37.5 LAccepted-AOC 6146 HIRA CHOWK SIRKI BAZAR BATHINDA PB 151005 | BATHINDA | PUNJAB | 151005 | L1 | Accepted-AOC Tender AoC | |
| 2 | L2₹41.7 L+₹3.8 L (10.0%)Rejected-Finance 583 URBAN ESTATE II HISAR 125005 | HISAR | HISAR | HARYANA | 125005 | L2 | Rejected-Finance Being L2 | |
| 3 | L3₹43.3 L+₹5.5 L (14.4%)Rejected-Finance | L3 | Rejected-Finance Being L3 |
Tender Value
₹48 L
EMD Value
₹96,000
Closing Date
31 Dec 2022, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
GE(W) HISAR
GE(W) HISAR HISAR MIL STN HISAR 125006
GE(W)/HSR-60/2022-23 REPAIR TO CHAJJA, BALCONY AND STAIR CASES IN OTM, JCO/OR MD ACCN AND MES COLONY (DAY TO DAY) OF ZONE A AT HISAR MIL STN UNDER GE (W) HISAR
2022_MES_566906_1
GE(W)/HSR-60/2022-23
Open Tender
Civil Works
Item Rate
180 days
GE(W) HISAR
All as per tender documents
8 documents required · 8 mandatory
₹500
GE(W) HISAR
₹96,000
Yes
2 Mar 2023
2 Dec 2022
2 Jan 2023
2 Dec 2022
31 Dec 2022
17 Dec 2022
Amount
Taking down cement plaster of any layers upto brick level upto three Storey incl racking out joints, hacking for key & scrubbing down with water etc complete all as specified and directed.
M&L for 15mm thick rendering in CM 1:4 over brick / conc wall surfaces trowelled to even & smooth w/o using extra cement for externall wall surfaces upto three storey Bldgs mixed with wpc as per manufacturer instruction complete.(WPC shall not be measured and paid separatly, price are incl of WPC) complete all as specified and directed.
M&L, 15mm thick rendering upto three storeys in CM 1:6 to brick/conc wall surfaces trowelled to even & smooth w/o using extra cement complete all as specified and directed.
All as above item No 3.00 but 10mm thick in CM 1:3 as in ceiling complete all as specified and directed.
Demoliton of Brickwork or stone/boulder masonry, built in cement mortar including all quoins, arches, pillars, etc, but excluding ashlar facings, dressed stonework and precast concrete articles and removing debries out of MD land complete all as specified and directed.
M&L Brick work with flyash bricks, straight or curved on plan exc 6m mean radius, built in CM 1:4 complete all as specified and directed.
M & L for Brick work of Fly Ash Bricks old size, straight or curved on plan to any in half brick thick walls , built in cement mortar 1:4 complete and all as specified and directed.
M & L for preparation of newly plastered surface of wall and applying two coats of OBD over two coat of 1mm thick wall care putty on wall complete all as specified and directed
M&L preparing new plastered surfaces of walls and applying two coat of cement base paint over one coat of primer complete all as specified and directed. Note:- Painting shall only be started in any Bldg after completion of Structural Repair work of that Bldg to the full satisfaction of Engr-In-Charge.
M&L for preparation newly plastered surfaces of wall and applying three coats of white wash complete all as specified and directed.
M&L preparing new plastered surfaces of ceiling and applying three coat of white wash complete all as specified and directed. Note:- Painting shall only be started in any Bldg after completion of Structural Repair work of that Bldg to the full satisfaction of Engr-In-Charge. (2) after preparation of surface ,approval shall be obtained from Engr-In-Charge before applying primer and further treatment/coat.
Providing and Erecting steel props (upto Full Height ,Braced at centre ,resting on wedge and block to support the structure provisionally during repair work and maintaining them in position till reqd and complete all as specified and directed.
Chipping of loose/ damaged /cracked / previously repaired / delaminated or weak concrete by chieseling to expose the sound core concrete where ever required and to expose rusted reinforcement upto depth n.exc 50mm and disposal of rubbish off the premises to a distance not exc 50 mtrs including cleaning of reinforced concrete surface by air compressor complete all as specified and directed.
Supply and apply of rust remover cum passivator to remove rust from existing reinforcement by using product: Rustoff-100 of Sika or equivalent make in Fosroc/ Thermax as approved by GE, with density 1.01 Kg/ltr at 30 degree celsius and consumption : 0.2 Kg/Sqm/coat complete all as specified and directed. Note: The mtrl to be applied thoroughly on exposed rebars only with the help of a brush of suitable size. The area will be measured as length of bar x two times the dia of bar).
Supply and apply a cement based polymer modified rebar corrosion protection system to existing reinforcement using cement based polymer modified rebar corrosion protection system with consumption : 3.75 kg/Sqm for two coats and Product requirements: carbonation resistance: 2 mm of SikaTop Armatec®-108 of Sika or equivalent make in Fosroc / Thermax as approved by GE corresponds to 20 mm of normal mortar; bond strength > 1N / Sqmm according to ASTM C 882-78 complete all as specified and directed. Note: The mtrl to be applied thoroughly on exposed rebars only with the help of a brush of suitable size. The area will be measured as length of bar x two times the dia of bar)
M&L for Providing, mixing & applying two component Epoxy resin concrete Bonding coat on prepared RCC surfaces as per manufacturer's specification including prepartaion of surface throughly and cleaning complete where ever required with using Product: Sikadur®-32 LP of Sika or equivalent in Fosroc / Thermax as approved by GE with Consumption: 0.4 kg/Sqm and Product requirements: Complies with ASTM C 881-78, Type II Grade 2 Class B+C complete all as specified and directed.
Providng extra reinforcment with TMT bars as per site design requirement including straightening ,cutting ,bending, placing in position ,binding with GI wire of 18 gauge etc complete in all respects .Additional reinforecment wit hadequate lap length & rings at required spacing shall be tied with existing reinforcement using binding wire or welded as per site requirement complete all as specified and directed.
M&L for providing by mixing and trowel application of prepacked, light weight, two component structural grade polymer modified fibre reinforced thixotropic cement mortar Sika Monotop 122F of Sika or equivalent make in Fosroc / Thermax as approved by GE at an average thickness exceeding 10mm and upto 25mm to the prepared concrete surface in soffit of slabs, beam, columns, parapets, fins and facias at any height, including finishing of applied Polymer mortar as per the technical specifications and manufacturer's instructions complete all as specified and directed .
M&L for weld-mesh of size 75x75x3mm to be wrapped on the exposed surface of rib of beam & on the slab bottom and tack welding to the exposed reinforcement at close intervals and gunite with cement mortar 1:3 mixed with admixture Sika Plasto creat plus or equivalent make in Fosroc / Thermax as per manufacturer's instructions as approved by GE around rib of beam or roof slab of thickness n.exc 40mm to be applied under an operating pressure. The gunited surface to be cured properly for a min of 7 days all in complete as per the technical specifications and manufacturer's instructions and directed.
Providing and fixing water tight centering & shuttering and Scaffolding including bolting, strutting, propping etc. including removal of form work from column, beam , slab etc. complete as per site requirement and directions of Engineer-in-charge.
Supply and apply a ready to use non shrink, cementitious free flow micro-concrete (<100 mm) using Product: SikaRep® Microcrete-4 + adequate coarse aggregate, Yield: approx 17 Ltr/bag (30 Kg) (depending on the size and quantity of coarse aggregate added), Product : SikaRep® Microcrete-4 or equivalent make in Fosroc / Thermax as approved by GE, Product requirements: compressive strength > 60 N/Sqmm (28 days) according to ASTM C 1107-99 complete all as specified and directed.
M&L for providing and fixing 12-16mm dia injection ports non returnable nozzle by drilling, cleaning and sealing holes 50-75 mm deep at 200mm c/c with fast setting high strength Epoxy putty, solvent free, three component compound based on epoxy resins, graded fillers and thixotropic agents using Sikadur 31 of Sika or equivalent make in Fosroc / Thermax as approved by GE as in beams, columns, slab and parapets as per the technical specifications and manufacturer's instructions complete all as specified and directed.
Demolition of RCC Roofs, floors (other than ground floors), beams, staircases, landing, chajjas upto three storey ,Balcony RCC Wall, RCC water Tanks, parapet RCC Wall, and similar suspended work and making good the disturbed area in CM 1:3 complete all as specified and directed.
M&L for cutting holes in brick walls built in cement mortar /concrete for inserting support for chajjahs/ cooler plateforms / cooler standetc and making good dismantled portion in cement mortar 1:3 or PCC 1:2:4 type B1 as required super ficial area of cutting nexc 100sqcm complete all as specified and directed. Note:- cutting of holes shall be carried out by core cutting machine
S&F prepainted galvalume alumimium zinc coating GI based plain steel sheet 0.50 mm thick of any color having tensile strength of 550 MPA as a roof covering /Cladding to wall and in Chajjah , Fixed with self tapping screw complete all as specified and directed.
S&F mild steel joist ,channel ,angle ,tee fixed independently without connection plates etc (cut to ordinary length i.e. within 20mm of the length indicated ) complete all as specified and directed.
S&F Framed work Fe- 290 (Gde E-165)as in doors or gates of angle or other section with gusset plates ,rails,braces etc complete drilled for fixig of steel sheeting or other coverings . Doors etc to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings (exclusive of steel sheeting or other coverings, running rails and guides )and hanging also fastening and fixing complete all as specified and directed.
S&F 1.25 mm Mild Steel plain Black sheet in Hearths,Coveirng to door Chowkats (frmaes) including welding of sheeting to frame , chullah hoods ,water tanks ,water troughs ,ducts ,urina ltroughs andfunnels etc cut to size edgrs beaded if directed ,holes punched including round headed screws ,clout nails or rivets and fixed to wood or steel members etc with plain 40 mm lap joints or welded / riveted seams including bending ,turning up ,mitred angles ,stopped ends, outlets etc as required complete all as specified and directed.
M&L preparation of new steel surfaces of any description, over 10 cm in width or girth, and applying two coats of synthetic enamel paint complete all as specified and directed.
M&L Green Marble , 18-20 mm thick machine cut laid over cement screed as in floor and jointed with grey cement slurry and pointed with white cement with admixture of pigment to match the shade of the granite stone including cutting and polishing with and including 15mm thick screed bed or bedding in cement mortar 1:6 complete all as specified and directed.
M&L Green Marble 18-20mm thick machine cut, in skirting/ dado laid over cement screed and jointed with grey cement slurry, and pointed with white cement with admixture of pigment to match the shade of granite stone including grinding and polishing complete with and includingwith & including backing coat in 10mm thick CM (1:3) to receive marble complete all as specified and directed.
Demolition of stone slabs and tiles of any description or thickness in floors, aprons etc (laid, bedded and pointed in any mortar) complete all as specified and directed.
M&L for Machine cut kota stone slab flooring 18-20mm thick of size not less than 0.30 Sqm of each slab over cement screed base laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing with and including 15mm thick screed bed or bedding in cement mortar 1:6 complete all as specified and directed. (Note : Single piece tiles will be placed on the surface of stair case tread area).
M&L for Kota stone slab 15mm thick in riser of bricks steps & riser of staircase , skirting, dado and pillar laid over cement screed and jointed with pigment to match the shade of the slab including rubbing and polishing with & including backing coat in 10mm thick CM (1:3) to receive Kota Stone complete all as specified and directed (Note : Single piece tiles will be placed on the surface of stair case riser area).
M&L for rounding to edges of stone slabs one edge, such as in steps, cooking platform, and other similar situations complete all as specified and directed.
Demolition of reinforced cement concrete of any descritption and in any position not otherwise speccifically provided for complete all as specified and directed.
S&F Fe- 290 (gde E-165)Stairs (framed) incl stringers,treads,landings,balusters,hand railsetc including cleats,brakcets, and fixing complete all as specified and directed.
M&L RCC 1:2:4 Type-B1 (20mm graded aggregate) in slabs supported on walls, beams and columns in floors, roofs, landings, balconies, canopies, deck slabs and in shelves and the like incl necessary forms works complete all as specified and directed.
Demolition of cement concrete in ground floors and pavings not exc 15cm thickness (below or above ground level), including removing out of MD Land complete all as specified and directed.
M&L Cement concrete type D 2, 1:4:8 (using 40 mm graded graded stone aggregate) in bed of drain ,sub base of flooring/ hard standing complete all as specified and directed.
M&L for 40 mm thick PCC 1:2:4 type B1 as in flooring and complete all as specified and directed.
M&L Pre-cast cement concrete Type B1 1:2:4 (20 mm graded aggregate ) kerb Stone ,setting in CM 1:4 and complete all as specified and directed.
M&L Chequered Coloured (red & yellow) cement concrete tiles 25 cm X25 cm X 25 mm thick over 15 mm thick bedding of CM 1:6 in floors ,set,jointed and pointed in neat cement slurry with gray cement and pigment (Min. two shades) and complete all as specified and directed.
Demolition of tiles of any thickness, laid, bedded and pointed in any mortar complete all as specified and directed.
Siya constructions
moti construction company
stage.html
html • 0.05 MB
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .