Empanelment of vendors for supply, fabrication and installation of traffic booths at different designated locations in Kanpur City, under Kanpur Nagar Nigam.

Amount

Providing and fixing hand rail of approved size by welding etc. to steel ladder railing, balcony railing, staircase railing and similar works, including applying priming coat of approved steel primer.

Providing and fixing precoated galvanised steel sheet roofing accessories 0.50 mm (+0.05%) total coated thickness, Zinc coating 120 grams per sqm as per IS: 277, in 240 mpa steel grade, 5-7 microns epoxy primer on both side of the sheet and polyester top coat 15-18 microns using self drilling/self tapping screws complete:

Providing and fixing on wall face unplasticised Rigid PVC rain water pipes conforming to IS: 13592 Type A, including jointing with seal ring conforming to IS: 5382, leaving 10 mm gap for thermal expansion, (i) Single socketed pipes.

Designing, fabricating, testing, installing and fixing in position Curtain Wall with Aluminium Composite Panel Cladding, with open grooves for linear as well as curvilinear portions of the building, for all heights and all levels etc. including: (a) Structural analysis & design and preparation of shop drawings for pressure equalisation or rain screen principle as required, proper drainage of water to make it watertight including checking of all the structural and functional design. (b) Providing, fabricating and supplying and fixing panels of aluminium composite panel cladding in pan shape in metalic colour of approved shades made out of 4mm thick aluminium composite panel material consisting of 3mm thick FR grade mineral core sandwiched between two Aluminium sheets (each 0.5mm thick). The aluminium composite panel cladding sheet shall be coil coated, with Kynar 500 based PVDF/Lumiflon based fluoropolymer resin coating of approved colour and Code Description Unit Rate No. 129 SUB HEAD: 8.0 CLADDING WORK shade on face # 1 and polymer (Service) coating on face #2 as specified using stainless steel screws, nuts, bolts, washers, cleats, weather silicone sealant, backer rods etc. (c) The fastening brackets of Aluminium alloy 6005 T5 / MS with Hot Dip Galvanised with serrations and serrated washers to arrest the wind load movement, fasteners, SS 316 Pins and anchor bolts of approved make in SS 316, Nylon separators to prevent bi-metallic contacts all complete required to perform as per specification and drawing The item includes cost of all material & labour component, the cost of all mock ups at site, cost of all samples of the individual components for testing in an approved laboratory, field tests on the assembled working curtain wall with aluminium composite panel cladding, cleaning and protection of the curtain wall with aluminium composite panel cladding till the handing over of the building for occupation. Base frame work for ACP cladding is payable under the relevant aluminium item.s The Contractor shall provide curtain wall with aluminium composite panel cladding, having all the performance characteristics all complete, as per the Architectural Drawings, as per item description, as specified, as per the approved shop drawings and as directed by the Engineer-in-charge. However, for the purpose of payment, only the actual area on the external face of the curtain wall with Aluminium Composite Panel Cladding (including width of groove) shall be measured in sqm. up to two decimal places.

Providing & Fixing decorative high pressure laminated sheet of plain / wood grain in gloss/matt/ suede finish with high density protective surface layer and reverse side of adhesive bonding quality conforming to IS: 2046 Type S, including cost of adhesive of approved quality

Providing & Fixing of M.S. Sheet on top and bottom of Structure to increase the strength incl. cutting, welding, labour T&P etc. all complete

Casement Door With top hung ventilator with 3D and S.S friction hinges (400 x 19 x 1.9 mm) made of (big series) frame 67 x64mm, sash 67x 110 mm & mullion 67x80mm all having wall thickness of 2.3 mm diameter and single glazing bead / double glazing brad of appropriate dimension (Area of door upto 2.50sqm) (Operational door with top fix)

Hydraulic door closer bottle type M.S. body with necessary accessories and screws complete

Providing and fixing ISI marked oxidised M.S. handles conforming to IS:4992 with necessary screws etc. complete:

Constructing masonry Chamber 90x90x100 cm inside, in brick work in cement mortar 1:4 (1 cement: 4 coarse sand) for sluice valve, with C.I. surface box 100 mm top diameter, 160 mm bottom diameter and 180 mm deep (inside) with chained lid and RCC top slab 1:2:4 mix (1 cement: 2 coarse sand: 4 graded stone aggregate 20 mm nominal size), i/c necessary excavation, foundation concrete 1:5:10 (1 cement: 5 fine sand: 10 graded stone aggregate 40 mm nominal size) and inside plastering with cement mortar 1:3 (1 cement: 3 coarse sand) 12 mm thick, finished with a floating coat of neat cement complete as per standard design

Circular shape 560 mm dia precast R.C.C. manhole cover with frame - E.H.D. - 35

Supply & Fixing of 150MM Ventilating Fan all complete as per drawing and specification and direction of engineer incharge. Make-Crompton, Havells, Bajaj or Equivalent AB

Wiring for light point/ fan point/ exhaust fan point/ call bell point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable in surface/ recessed medium class PVC conduit, with modular switch, modular plate, suitable GI box and earthing the point with 1.5 sq.mm. FRLS PVC insulated copper conductor single core cable etc as required. One light point with 5 Amp. switch. Group C Supply and 24 to fixing of recess/surface mounting 32 Watt coated die cast heat sink, diffuser/ in LED Down Lighter having aluminium housing with Reflector all and driver set round Powder extended complete respect.

Supply and 24 to 32 coated die fixing Watt cast heat sink, diffuser/ in of LED recess/surface Down Lighter aluminium Reflector all housing driver and mounting having with set round Powder extended complete respect. CAT-AAA

Supply and fitting of ceiling fan Usha, khetan, Bajaj I.S.I including all complete

Supply and fixing of electronic fan regulator 120-280 V. ISI marked, on the existing switch board including making connections, required material, labour T&P etc. for proper completion of work to the satisfaction of Engineer in charge of work.

Supply and fixing of power plug with 20 Amp./250 volt flush type modular switch and 5 pin 20 A/250 volt flush type universal modular socket switch on concealed M.S box including supply of all material, labour T&P etc. required for proper completion of work

Supply and fixing of ISI marked (IS: 9537 part-2 with latest ammendments) PVC Conduit (the class of pipe in concealed / exposed system in wall, ceiling or on floor including cutting of brick work, laying of conduit and fixing and then plastering with cement, sand motar finished to the level, on floor the conduit shall be covered in PCC 1:2:4 for protection, including cost of threading of conduit and providing necessary sockets, bends, tees, junction boxes of required sizes and chuck nuts as directed at site by the engineer-in- charge with supply of all material labour and T & P required for proper completion of work. conduit being laid either in concealed system in ceiling slab or wall or on surface or under the frame of false ceiling including flexible conduits or through wooden partition including clamping arrangements as 25mm dia. Conduit.

Supply of visitors Chairs of approved quality (neelkamal) with all complete

Supply of Revolving Executive chairs of approved quality with all charges compelet

Supply of 1.5 x 0.90m size table of approved quality with toughen all charges

Supply and installation of 1.5 hp submerciblepump incl etc all comp.

Providing and fixing vitreous china dual purpose closet suitable for use as squatting pan or European type water closet (Anglo Indian W.C pan) with seat & lid fixed with C.P. brass hinges and rubber buffers, 10 litre low level flushing cistern with fitting and brackets, 40 mm flush bend, 20 mm over flow pipe, with specials of standard make and mosquito proof coupling of approved municipal design complete, including painting of fittings and brackets, cutting and making good the walls and floors wherever required: White vitreous china dual purpose WC pan with white solid plastic seat and lid with white vitreous china flushing cistern and C.P. flush bend

Providing and fixing wash basin with c.i brackets 15mm C.P. brass waste of standard pattern, including painting of fitting and bracket cutting and making good the wall whereever required

White Vitreous China Wash basin size 630x 450 mm with a pair of 15c.p. bracket pillar type

Providing and fixing P.V.C. waste pipe from sink or wash basin including P.V.C. Waste fitting complete Semi rigid 32mm dia / 40mm dia

Providing and fixing 600mm x 450mm bevelled edge mirror of superior glass of approved quality compelet with 6mm thick hard board ground fixed to wooden cleat with C.P. Brass screw and washers complete

Providing and fixing C.P. brass bib Cock of approved quality 15mm nominal bore

S.S. round Jali 125mm

PVC water storage tank syntrex or equivalent

PVC pipe 110mm dia I.S.I Marked (working pressure 4kg/sqcm)

PVC Bend 110mm dia I.S.I Marked

CP Brass Towel Rail 820x20mm together with pair of C.P brass bracket to fit towel Rail

M/S UTTAR PRADESH NIRVAL VARG VIKAS KENDRA

M/S ASEEM INTERNATIONAL