SPL REPAIR/RENOVATION OF TOILET (BOYS AND GIRLS) OF SCHOOL BUILDING OF KV NO 3 AMRITSAR UNDER GE NAMS

Amount

Taking down chowkats or frames with shutters (without taking off shutters from the frames) not exc. 1.5 sqm each complete all as specified and directed.

Taking down chowkats or frames with shutters (without taking off shutter from the frames) exc. 1.5 sq.m but not exc. 4 sq.m each complete all as specified and directed.

M&L for framed work as in doors of angle or other section complete drilled for fixing sheeting with all fitting and fixture complete all as specified and directed.

M&L Providing and fixing factory made single extruded WPC (Wood Polymer Composite) solid decorative type flush door shutter of size 30mm thick comprising of virgin polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/ wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) having minimum density of 650 kg/cum and screw withdrawal strength of 1800 N (Face) & 900 N (Edge), minimum compressive strength 50 N/mm2, modulus of elasticity 850 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/moisture proof and fire retardant. WPC to be laminated with PVC foil of minimum 14 microns thick of approved design pasted with hot melt adhesive on both faces of shutter and fixing with stainless steel butt hinges of required size with necessary full body threaded star headed counter sunk S.S screws, all as per direction of EngineerIn- Charge. (Note: stainless steel butt hinges and necessary S.S screws shall be paid separately

S & F Factory made single extruded WPC (Wood Polymer Composite) solid door frames/ Chowkhat of size 50x100 mm comprising of virgin PVC polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/ wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) fabricated with miter joints after applying PVC solvent cement and screwed with full body threaded star headed SS screws having minimum frame density of 750 kg/ cum, screw withdrawal strength of 2200 N (Face) & 1100 N (Edge), minimum compressive strength of 58 N/mm2, modules of elasticity 900 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/ moisture proof and fire retardant including making good after complete all as speicifed and directed of Make Rajshree or Ecocell equivelent

S&F factory made solid PVC moulded door shutter with wood free solid board , 28 to 30 mm thick (stiles) with 2, 4 or 6 rised panel design with 5mm thick 3D wood laminated moulded PVC sheet Polyurethane painted on the front and back face with with 19 guage thickness usiing MS square tuning supplying and fixing of 19mm x19mm frame structure complete all as specified & directed Make:- rajshri Plastiwood or M/s Solutions New Delhi or M/s Kumar Arch Tech Ltd or equivalent of other including taking down of old shutter and making good complete all as specified and directed. Make as approved by GE from list of makes attached with tender documents.

S&F Solid PVC Door frame of sizes 95mm x 50 mm made out of 5 mm laminted both side colour PVC sheet reinforcement with MS square tube,supplying & fixing in opening as per specification & drawing complete all as specified and directed

S&F Aluminium anodised powder coating any colour minimum coating 50 micron door/ windows/ventilators with one or more rebates including joining cleat for fixing etc complete with frame of fixiing with handles, tower bolts, rubber gasket and maruti lock , complete all as specified and directedetc complete Note :- Floor door spring, sheet glass, wire cloth, etc shall be measured and paid seperately.

S & F anodised aluminium powder coated window and ventilator shutters, sliding/side hung type without sash bars, aluminium sections weighing 0.55 kg/m including necessary ,5 mm thick, black tinted glass panes with nano coating & glazing, aluminium joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws, anodised aluminium fittings such as peg stays 150mm long (1 no.), hinges type B-21 100mm long (2 no.) suitable handle (1 no.), rollers etc complete all as specified all as specified

M&L for providing and fixing fully glazed 10mm thick entrace tuoghening glass door comprising of one leaf glass shutter of any size gully glazed with neceesary handle , etching ,mpivot arrangement fixed to aluminium doors with aluminum beeding and gasket to aluminum framework in square exc 0.50 sqm in each pane complete all as specified. (a) All the samll works such as cuttings raking making holes pinning insertion etc making good to disturbed portion as per site requirements/ users / given by the Engineer-in-Chrage shall be included in unit quoted rates (b) All itching work in glass as directed Engineer-in-Chrage shall be included in unit quoted rates. (c) All Glass door shall be water tight with megnets water seal/as directed Engineer-in-Chrage shall be included in unit quoted rates.

S&F 3 mm thick figured glass, pin headed type and glazing with oil putty in square n. exc 0.5 sqm each panes complete all as specified

S&F, floor doouble door stopper of aluminium alloy body and tongue, anodised with hard drawn steel spring, fixed in floor, overall length of cover plate 140mm complete all as specified and directed.

S&F mild steel cold rolled medium weight butt hinges 100mm size fixed screws to wooden frames or with welding to steel frames all as specified and directed by Engr-in-charge.

S & F aluminium handle cast type anoodised 150mm size ISI mark complete all as specified and directed.

S&F 150mm aluminium anodised barrel tower bolts of extruded section and fixed ISI marked complete all as specified and directed.

S & F 250 mm long Aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast Aluminium alloy complete all as specified and directed.

S&F in repairs 300mm long mild steel ordinary rat tail rod pattern spring with roller plate including fixing with nails/ bolts or welded complete all as specified and directed.

Dismantling of brick works in cement mortar complete all as specified and directed.

M & L for brick work with sub class 'B' bricks in Cement motar (1:6) straight or curved on plan exc 6 mtrs mean radius, complete all as specified and directed.

M&L for brick work with sub class ‘B’ bricks (old size brick) straight or curved on plan to any radius in half bricks thick walls built in CM 1:4 complete all as specified and directed.

Taking down cement plaster on brick/stone/concrete walls /ceiling incl racking out joints etc,hacking for key, scrubing down with water etc & dispose off debris upto a distance n exc. 500 mtrs where directed complete all as specified and directed.

M&L for rendering 15mm thick in cement mortar (1:6) on other than fair brick work or concrete surfaces of walls , finished even and smooth without using extra cement complete all as specified and directed.

M&L for 10 mm thick cement plaster in CM (1:3) on concrete surfaces of ceiling and finishing the surface even and smooth (without using extra cement) etc complete all as specified and directed.

M & L for preparation of newly plastered ceiling surfaces and applying three coats of white wash complete all as specified and directed.

M&L for preparation of newly plastered wall surfaces and applying two coats of oil bound distemper complete all as specified and directed.

M&L for preparation of new or previously untreated steel surfaces of any description, over 10 cm width or girth, not otherwise described and applying two coats of synthetic enamel paint over a coat of red oxide zinc chrome primer complete all as specified and directed.

M&L for applying one coat of oil bound distemper on walls, pillars cornices etc surface incl preparation of old plastered surfaces by brooming down or steel wire brushing, scrapping down smoke soot, moulds, moss and incl filling necessary where required with putty as in pathces or nail holes obtain smooth finish using sand paper and matching the existing surface complete all as specified and directed.

M&L for Prepration of old surfaces of ceiling includinng scrapping down smoke ,soot,and efflorescent salts and treatings oil and gresy spots, brooming down or steel wire brushing removing nails making good holes cracks etc on plastered or unplastered surfaces and applying two coat of white wash on ceiling surface complete all as specified

M&L for Granite 18-20 mm thick (table rubbed and polished) in steps, jambs, pillars, window cills, cooking platforms, wash basin platform, treads, risers and like laid in cement 15 mm thick cement mortar 1:4 including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite rounding to edges of granite stone slabs one edge such as in counter type WHB platform etc. incl dismantling / demolition and rubbish off the primises etc complete all as specified and directed.

M&L non skid ceramic coloured tiles 7 to 8 mm thick (Square/rectangular) area of each tile exceeding 0. 09 sqm but not exceeding 0.11 sqm, in floors etc. laid over 15mm thick screed bed in cement mortar 1:6 and jointed in neat cement slurry and pointed in white or coloured cement to match incl dismantling / demolition and rubbish off the primises etc complete all as specified and directed.

M&L for glazed ceramic coloured tiles of size 450mm x 300mm x 7mm thick verticale tiles with highlighter any colour on vertical surface such as skirting, dados, risers to steps etc set & jointed in neat cement slurry and pointed in white or coloured cement to match incl dismantling / demolition and e colour of tiles, incl dismantling / demolition over and including rendering 10mm thick in cement mortar (1:4) , complete all as specified and directed.

M&L for 25mm thick cement concrete 1:2:4 type B0 using 12.5mm graded stone aggregate as in sub base to receive floor finishes including demolition of PCC complete all as specified and directed.

Refixing old serviceable steel tubing and connections in new or old position (walls, ceilings, floors etc.) for 15mm bore of pipe complete all as specified and directed.

Refixing old serviceable steel tubing and connections in new or old position (walls, ceilings, floors etc.) for 20mm bore of pipe complete all as specified and directed.

Refixing old serviceable steel tubing and connections in new or old position (walls, ceilings, floors etc.) for 25mm bore of pipe complete all as specified and directed.

S&F 15mm bore tubing medium grade galvanised steel tubing with all fittings and fixed to walls, ceiling and in floor incl cutting, chasing in wall, floor or ceiling and making goodin CM 1:3 incl taking down old pipe complete all as specified and directed.

S&F 20 mm bore tubing medium grade galvanised steel tubing with all fittings and fixed to walls, ceiling and in floor incl cutting, chasing making good to facing for conceled water tubinng etc. cutting exeeding 10cm but not exeeding 20 cm girth on brick masonry in wall, floor or ceiling and making goodin CM 1:3incl taking down old pipe complete all as specified and directed.

S&F 25 mm bore tubing medium grade galvanised steel tubing with all fittings and fixed to walls, ceiling and in floor incl cutting, chasing making good to facing for conceled water tubinng etc. cutting exeeding 10cm but not exeeding 20 cm girth on brick masonry in wall, floor or ceiling and making goodin CM 1:3incl taking down old pipe complete all as specified and directed.

Supplying , fixing & Hoisting and fixing in position and connecting, in repairs, 500 litres capacity rotational moulded polyethylene water storage tank (cylindrical, vertical with closed top) including fixing arrangement for inlet/outlet/over flow and vent pipe of standard size all as specified in SSR Part-I including 20mm bore, ball valves high pressure of PTMT with epoxy coated aluminium rod & high-density plastic ball screwed for iron pipe and fixed complete all as specified and directed.

Supplying , fixing & Hoisting and fixing in position and connecting, in repairs, 1000 litres capacity rotational moulded polyethylene water storage tank (cylindrical, vertical with closed top) including fixing arrangement for inlet/outlet/over flow and vent pipe of standard size all as specified in SSR Part-I 20mm bore, ball valves high pressure of PTMT with epoxy coated aluminium rod & high-density plastic ball screwed for iron pipe and fixed complete all as specified and directed.

S& F, in repair vitreous china urinals, full stall complete including providing and fixing plugs, bedding urinal against wall in cement mortar 1:2, securing urinal to plugs with and including 60mm long brass screws, pointing around urinal back in cement incl flush pipe, grating, waste coupling and union for discharge pipe complete all as spd and directed by Engr-in-charge.

S & F in repair vitreous china ware counter ovel wash hand basin, any colour, size 605x430x200mm size fixing in slab including fixing waste pipe , CP waste coupling CAT Part No CNS WHT 705 of make Jaqaur all as specified and approved by Enger-in-Charge

S & F in repair for viterous china squating pan of (Orrissa Pattern) size 580 mm white with 'P' or 'S' trap front or back inlet and integral foot rest , including joining, filling and provision of cement concrete bedding 1:5:10, type E2 (excluding flushing cisteern and flush pipe) fixed incl cement concrete bedding as required set complete all as specified and directed.

S&F, in repair, vitreous china floor mounted singel peace WC with dule flush cisteren PP soft close seat cover , hinges accessories set as per size 390x610x800mm with cistern fitting (including fixing bolts flush pipe) CAT Part No DIS-WHT-93753P & DIS-WHT-93201 complete all as specified and directed. Make Jaquar/Perry ware/Hidware.

S&F in repair 10 ltrs capacity PVC valveless. Syphonic action type, flushing cistern, low level, with inlet, ball valve, float, and handle and brackets including 32mm dia flush pipe of polyethylene of high density for low level cistern complete all as spd and directed by Engr-in-charge.

S & F PVC waste pipe 32mm bore of size 750mm to 900mm long complete all as specified and directed.

S&F in repair 450mm long PVC connections with PTMT nuts of suitable for 15mm bore dia pipe complete all as specified and directed.

S & F in repair 15mm bore dia fancy type chromium plated long body bib tap with flange screwed down to iron pipe with all fittings CAT Part No CON 107KN of Make Jaquar complete all as specified and directed.

S & F in repair 15 bore dia chromium plated Stop cock/Angle cock screwed down high pressure with crutch or butterfly handle & screw both end for iron pipe or for unions complete all as specified and directed. Make cera /jagaur/perry ware/hind ware

S& F for in repair pilalr cock with 140mm extension body CAT part No VGP 81021N chromium plated fancy type screw with iron pipe incl all fittings complete all as specified and directed. Make Jaquar

S&F, in repair, 25 mm dia, 1 mm wall thickness stainless steel fancy type, decorative curtain rod with decorative ball type side brackets (As per Sample) fix with wooden gutties complete all as specified and directed.

S&F, in repair Grating, doom type , 100mm size of PTMT (minimum weight 25gms) complete all as specified and directed.

S & F 75 mm bore PVC (SWR) pipes single socketed in any length with rubber ring joints and necessary fittings laid in floors/Wall or trenches incl taking down old pipe complete all as specified and directed.

S & F 110 mm bore PVC (SWR) pipes single socketed in any length with rubber ring joints and necessary fittings laid in floors/wall or trenches incl taking down old pipe complete all as specified and directed.

S&F in repair 8mm dia brass, chromium plated health faucet (Hand shower) with 01 meter long flexible tube and wall hook. Make : Jaquar Cat No - ALD-573 or equivalent as approved by GE, complete all as specified and directed.

M&L for Demolition of reinforced cement concrete of cover slab/cooking platfrom and RCC roof tank etc complete all as specified and directed.

M&L for reinforced precast cement concrete 1:2:4 Type B1 (using 20mm graded aggregate) as in Slabs supported on walls,beams/lintel , landings,balconies, canopies, deck slabs and shelves including necessary form work complete all as specified and directed.

Mild steel TMT bars 8 to 10 mm dia cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with mild steel wire (annealed) not less than 0.9 mm dia., or securing with clips , including welding with mild steel completed all as specified and directed

S&F, in repairs, brass, chromium plated tubular towel rack 20mm dia 60cm long between flanges

S&F, in repair, chromium plated, Toilet paper holder complete all as specified and directed.

S&F in repair Towel ring round with round flange complete

S&F, in repair, CP, soap dish holder size 120mmx100 mmcomplete all as specified and directed.

S&F in repair Soap Dispenser with glass bottle complete . As per Cat No ACN -1135N of Make Jaquar or equivalent Make as approved by GE

S&F in repair Sheet glass shelf assembly consisting of 5.5mm thick sheet glass shelf 12cm wide with chromium plated bracket guard and railing 60cm long, complete all as specified.

S&F, in repair, chromium plated glass corner (Corse) size 300mmx300mm complete all as specified and directed.

S&F in repair, cast iron floor trap, with chromium plated grating including jointing to waste pipe fixed in cement concrete type B1 (1:2:4), dia of outlet 100mm complete all as specified and directed.

M&L, in repair, salt glazed stoneware gully traps square or round mounthed, type 'P' of size 125 x 100mm, setting and jointing with cement mortar (1:1) complete all as specified and directed.

S&F in repair 32mm bore CP bottle trap for wash hand basin with inlet and outlet screwed for iron pipe or connections including necessary packing, union and cap complete of approved make as per sampe all as specified and directed.

Taking down aluminium/copper point wiring from existing conduit / batten (light, fan, socket or power) complete such as switches, ceiling rose, pendent, regulators, socket, light fittings etc and removing material from site and making good the disturbed surface of wall / floor etc, complete all as specified and directed

M & L for Point wiring in replacement with 1.5 Sqmm (Nominal Area) 1100 Volt Insulated, FRLS unsheathed multi stranded flexible copper conductor cable in old PVC concealed conduit not less than 20 mm dia 1.5 mm thick for one light / fan point controlled by one switch (including cutting chases and making good the distributed surface ) and fixing new 3 mm thick hylem sheet top cover, sheet screws and 1.6 mm thick GI sunken boxes included 1.5 sqmm stranded copper conductor with green PVC insulation earth contunity conductor connected to comman earth dolly etc. complete all as specified and directed for the following:- NOTE : The cost of sunken boxes and bakelite sheet is included in the quoted rate)

One light / bell piont/ Fan point/ Exhaust fan point controlled by one 5 Amp switch one way.

Description all as per Srl item No 71.00 above but on the Indepedant board completeall as specified

Description all as per Srl item No 71.00 above but on the same board completeall as specified

All a per item No 2 above but with 2.5 Sq mm size cable multi stranded FRLS copper wire unsheathed for one 3 pin socket outlet 15 Amps on independent board including continuous earth wire of PVC insulated 2.5 Sq mm copper solid conductor connecting to common earth dolly complete.

Supply and fixing in replacement switch piano type 6 Amps one way 230 volts AC complete all as specified and as directed.

Supply and Fixing in replacement socket outlet 5 pin, 6 Amps flush type 230 volts AC complete all as specified and as directed

Supply and Fixing in replacement switch piano 16 Amps type one way 230 volts AC complete all as specified and as directed

Supply and Fixing in replacement socket outlet 6 pin 6/16 Amps multi purpose flush type 230 volts AC complete all as specified and as directed

Supply and fixing in replacement ceiling rose 65/50 mm two to three terminals complete all as specified.

Supply and fix in replacement MCB 40 Amps single pole with neutral, AC 230 Volts complete all As specified and directed.

Supply and fix in replacement MCBs single pole (SP) 5 to 32 Amps with 10 KA breaking capacity of 'C' series in distribution boards complete all as specified and directed.

Supply and fixing in replacement Sheet metal enclosure for DB's when MCB's to be used single door factory made flush fixed complete with 200 Amps rated busbar 240 Volts single phase 8 ways complete all as specified

Material and labour for replacement of lamp holder insulated body with 9 Watt LED Bulb, back plate batten/angle type for batten fitting fixed on bakelite sheet 100mmx100mm 230V AC cool day light 6500K having maximum height 1020mm heavy duty complete all as specified. make:- havells/ssk/cona/indo asian/legrand/anchor

Supply and fixing in replacement of LED T-8 tube light fitting with sinle side connection LED tube rod 18/20 W, 4 Feet made of CRCA sheet steel box type including bipin holder and connection with PVC insulated twin core 23/0.0076 ywisted copper cable from ceiling rode to light fitting complete all as specified and directed.

Supply and fix exhaust fan, steel body single phase 230V of size 300 mm sweep with blades, frame and louvers all as specified and directed.

M/s Vijay Construction Co.

Santokh Singh and Associates

tarvinder singh

tarlok singh contractor

Jaspal Construction Co.